T-Mo G2 Bricked, Please Help! - G2 and Desire Z Q&A, Help & Troubleshooting

Hi,
I purchased this phone in a wholesale lot. It powers on and is recognized on the computer as "Qualcomm HS-USB QDloader 9008" after installing the USB Host drivers. The screen stays blank, and QPST is telling me that the phone is in download mode (Q/QCP-XXX).
I need some help on getting the firmware loaded onto the device, if someone could get me a dump of the G2 using QPST or some other app, I'd appreciate it.

i have also bricked my desire Z by installing incorrect Hboot, now its not turning on, volume down+power combo not getting me to the bootloader, its not even recognized by my computer, i have also installed QPST QXDM, what did you install to get your phone recognized by your PC

desirezbilal said:
i have also bricked my desire Z by installing incorrect Hboot, now its not turning on, volume down+power combo not getting me to the bootloader, its not even recognized by my computer, i have also installed QPST QXDM, what did you install to get your phone recognized by your PC
Click to expand...
Click to collapse
you can try getting to hboot by doing trackpad+volume down+power

evilcuber said:
you can try getting to hboot by doing trackpad+volume down+power
Click to expand...
Click to collapse
i tried but that's also not working

Related

[Q] QPST driver

my desire Z is bricked, although by pressing volume UP+power button PC recognizes it as qualcomm cdma tech device, i am now trying to flash it via QPST, but QPST is not recognizing the phone, any idea ?

Can't get in bootloader mode

Dear XDA users,
I tried flashing FireFox OS on my N7...without making a back-up. Of-course, it didn't work so I was trying to acces my device on my pc while in CWM. I gave up. Sometime later I decided to try it again... but I just can't get into bootloader mode. When being hooked up to my pc, I hold all the buttons on the N7. Windows gives the device found sound and tells me my N7 is an Qualcomm HS-USB QDLoader 9008 (COM4). The screen on my N7 stays completely black.
I really don't know what to do :crying: I am so scared that I screwed up my N7 and can't use it anymore.
Please XDA, help me!
mcgloud said:
Dear XDA users,
I tried flashing FireFox OS on my N7...without making a back-up. Of-course, it didn't work so I was trying to acces my device on my pc while in CWM. I gave up. Sometime later I decided to try it again... but I just can't get into bootloader mode. When being hooked up to my pc, I hold all the buttons on the N7. Windows gives the device found sound and tells me my N7 is an Qualcomm HS-USB QDLoader 9008 (COM4). The screen on my N7 stays completely black.
I really don't know what to do :crying: I am so scared that I screwed up my N7 and can't use it anymore.
Please XDA, help me!
Click to expand...
Click to collapse
Unplug your N7 from your computer. Hold volume up + power buttons. That'll get you into the bootloader. Then, you can plug the N7 into the computer and should be able to use fastboot.
Sent from my Nexus 5 using xda app-developers app
Volume up and power is recovery mode.
Volume down and power is download mode.

Some Help Please?

Ok, so this all started way way way back when I tried to update twrp (maybe back in august?) and well, after doing so there was no recovery and trying to boot it gave me a secure boot certificate error. Fast forward to today. I follow a guide located around here, flashed the files needed through linux and the phone seemed to be taking them. Well... now it won't turn on at all. Hooking it up in windows shows no sign of life, the phone isn't charging and just no general response from it. Any suggestions?
If its any help it was on a lollipop rom when all of this started.
I think you are stuck on qdloader 9008 mode connect your phone to your windows pc then hold the power button to see any response
No response from the phone. Just a nice black screen
NO i ment is that try connect the phone to the pc open device manager and hold the power and vol up buttons of course the phone wont turn on if it is in hard bricked state but it will atleast show its emergency download state on your device manager

Pixel XL seen as QUALCOMM HS-USB 9008

Hey guys...
so i managed to connect my almost dead Pixel XL, to the PC
and its now know as QUALCOMM HS-USB at Device Manager...
the question is...
how to proceed now?
i found lots of guides to OnePlus, but cant find any to install Android Stock Rom...
any tips will be appreciatted!!!!!
tasty_boy said:
Hey guys...
so i managed to connect my almost dead Pixel XL, to the PC
and its now know as QUALCOMM HS-USB at Device Manager...
the question is...
how to proceed now?
i found lots of guides to OnePlus, but cant find any to install Android Stock Rom...
any tips will be appreciatted!!!!!
Click to expand...
Click to collapse
Just went through the same problem with my Pixel Xl.
To fix it i hold down the Volume Down + Power button until the phone boots in to the bootloader.
From there I just flashed the factory IMG.
Best of luck
hey my friend, i was thinking about It, but i have no screen...
how can i know that the phone booted in bootloader?
already tried...but the phone didnt connected to the computer...for sure wasnt in bootloader
Well it can be a hardware failure, but since i had the exact same problem with the black screen and my phone also showed up as QUALCOMM HS-USB 9008, i doubt it is a hardware failure. I can only suggest solutions that might work.
-Try holding in all the buttons for 14 seconds.
-Connect phone to the computer, then run "fastboot devices", if the phone is recognized(shows up in the list), flash factory img.
-Connect phone to the computer, then run "ADB devices", If the phone is recognized "ADB reboot bootloader". Then proceed as when you flash factory img.
Did you come from Android O btw ?
HALV0RS3N said:
Well it can be a hardware failure, but since i had the exact same problem with the black screen and my phone also showed up as QUALCOMM HS-USB 9008, i doubt it is a hardware failure. I can only suggest solutions that might work.
-Try holding in all the buttons for 14 seconds.
-Connect phone to the computer, then run "fastboot devices", if the phone is recognized(shows up in the list), flash factory img.
-Connect phone to the computer, then run "ADB devices", If the phone is recognized "ADB reboot bootloader". Then proceed as when you flash factory img.
Did you come from Android O btw ?
Click to expand...
Click to collapse
everything was fine with Nougat, then i received Android O update and it happened
i was browsing the web and listening to some music, then it rebooted itself and didnt come back again!
tasty_boy said:
everything was fine with Nougat, then i received Android O update and it happened
i was browsing the web and listening to some music, then it rebooted itself and didnt come back again!
Click to expand...
Click to collapse
Trie "Vol Up+Vol Down+Power for 30 sec"
I am sure you have already tried all the combinations in the world.
I would return it to google.
Best of luck.
tasty_boy said:
everything was fine with Nougat, then i received Android O update and it happened
i was browsing the web and listening to some music, then it rebooted itself and didnt come back again!
Click to expand...
Click to collapse
Hey man, have the same problem with my pixel. Did you fix it?
I had that issue to with mine. Ended up getting a RMA

lenovo P1 totally bricked

I was trying to use QFIL to update the phone and get rid of chinese characters,and now my phone is completely blank with no sounds or vibration.The computer still connects to the phone in QFIL but doesnt show as a device on the computer.
Any help in fairly simple language would be great.
alan53 said:
I was trying to use QFIL to update the phone and get rid of chinese characters,and now my phone is completely blank with no sounds or vibration.The computer still connects to the phone in QFIL but doesnt show as a device on the computer.
Any help in fairly simple language would be great.
Click to expand...
Click to collapse
Go to stock recovery if it is possible( both volume + power button) then power off and then press volume up anx cpnnect to pc. What happened now?
Thanks i tried stock recovery nothing happens ie no reaction from the phone,if i hold the power button for a minute and then press volume up and connect to pc the pc bleeps
Does Qualcomm port shows?
Can you use qfil program in this state?
yes qualcomm shows in device manager and qfil seems to work but ends in sahara fail
alan53 said:
yes qualcomm shows in device manager and qfil seems to work but ends in sahara fail
Click to expand...
Click to collapse
qualcomm 9008 or 9006?
Starchm said:
qualcomm 9008 or 9006?
Click to expand...
Click to collapse
qualcomm 9008
got it fixed somehow!

Categories

Resources