Develop Bugs

samsung i780 how to hard reset

my fd got a i780 in hong kong and try to put in chinese rom failed.anyone knows how to do hard reset with it?
and any rom with wm6.1 eng for i780 ?

Spoke to Samsung today .... and it would appear that the rumours are true and that no -one including Samsung know how to perform hard reset !!
They also confirmed they would not be able to flash update the ROM to UK version for me .... GREAT !!!
I have located a friendly forum member who has a UK working version and is happy to dump the ROM .... but we don't know how to ....
Can anyone help in a step by step approach to dumping ROM and then creating a flashable version I can use?
Any help from anyone Really gratefully received ....

This is too bad.....has anyone tried using a program for Safemode on this ppc?.....perhaps thats the only way to perform a hardreset for those that are stuck on the welcome screen.....because the safemode will kick in when the ppc detects resets in a loop and then thats when you're able to enter the ppc in safemode just like a normal pc......i guess from here you can either uninstall the program that was incompatible or go through start-setting etc etc-hard reset option......anyone here cares to try this and let us know which safemode program they are using and if it works?.....thanks

You can Install RealVGA, and then also the Language Pack.
So you can change the Language of your i780.

Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.

utp said:
Should we start a trial and error method on the hard reset?
Update:
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.
Click to expand...
Click to collapse
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.

vittogn said:
Thanks for all you testing....
What do you mean with "emergency mode"? And what about pin reset?
At the end.....are you able now to hard reset with this procedure?
Thanks a lot in advance.
Click to expand...
Click to collapse
No emergency mode does not give hard reset, it seems to be used for downloading ROM to flash using in OS Upgrade............

Should we start a trial and error method on the hard reset?
Update:
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.

Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230

samueltlc said:
Anybody got a try:
http://www.ppcsg.com/index.php?showtopic=96268&st=230
Click to expand...
Click to collapse
samueltc, tried, no luck.. it just soft reset the device...

utp said:
samueltc, tried, no luck.. it just soft reset the device...
Click to expand...
Click to collapse
Didn't work for me.

I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.

ekerbuddyeker said:
I had an idea... Use AEBPlus. Find the software app that does the hard reset and map it to a key combination in AEBPlus. Even is the screen does not work, if you know the password (usually 1234, enter) then this might work as a backup fix until another way is found.
Click to expand...
Click to collapse
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..

damn utp you're desparate XDDD

utp said:
Thanks for your tip, as we cannot boot into the WM, so cannot install the app..... not talking about inputing password..
Click to expand...
Click to collapse
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
 Press and hold both the left and right softkeys.
 While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."

raiz07 said:
Saw this in PPCSG Forums, maybe you could try this...
"Can someone try if the below steps can cold reset the I780???
1. Remove the storage card from the device, if one is
present.
2. With phone powered off:
 Press and hold both the left and right softkeys.
 While both softkeys are held down, press and
hold until the unit powers on.
3. As the device begins to power on, release both
softkeys.
Note Once the phone powers on, you should see an
onscreen alert message (a white screen with blue text).
If you do not see this screen, let the device power up
normally, turn it off again, and then repeat steps 2 and
4. Immediately after the alert screen appears, press
the left softkey.
5. If the reset was successful, the device displays a
pop-up message stating the device is currently
reformatting. This process can take several
minutes. Allow the process to finish without
interruption."
Click to expand...
Click to collapse
just tried this....it doesn't work

irv777 said:
just tried this....it doesn't work
Click to expand...
Click to collapse
The search goes on...

So sorry to hear it doesn't work...
http://forum.xda-developers.com/showthread.php?t=370529&page=9

Should we start a trial and error method on the hard reset?
Update:
200803220357
Result: (No luck)
tried ALL combo of 3 to every keys.
200803160031
Result: (No luck)
tried ALL combo of Q to every keys.
tried ALL combo of PWR to every keys.
tried Hold reset 30 secs
tried Hold reset 30 secs with PWR button
tried Hold reset 30 secs with CAM button
200803122856
Result: (No luck)
Info: tried ALL single key with reset.
tried ALL combo of Fn to every keys.
tried ALL combo of Left soft/Right soft/Connect/Disconnect/Power button.
200803112310
Result: Got emergency mode key combo. Fn (the left lower button where you press for front row key) AND ENTER key and pin reset.
Info: tried ALL single key with reset.

in the web i find this ;
Samsung i607 Blackjack hard reset
Resetting your Phone
You can reset your phone’s settings and clear all added
data from memory.
Resetting the Phone
1. On the Home screen, press the Start soft key
2. Select Settings > More... > Security > More... >
Reset.
3. Enter the reset password and press the Done soft key.
The default password is 0000.
4. Press the Yes soft key to confirm. The phone resets and
reboots itself.
Ps. i don't have this device

[Q] Cannot flash stock rom

Hi. I have a problem with Touch Pro 2. There is stock rom, never updated. But system is behaving very bad. Even touch works only when it wants (maybe physical damage, but I want to have new WM). But installation stops at 1% and phone reboots. Problem is that I have set a password on WM. There is a problem with touch in menu, so I can't remove it. May that be the problem that this secure makes flashing even stock roms impossible? I have no free SD, so only flash via RUU.

kubekpop said:
Hi. I have a problem with Touch Pro 2. There is stock rom, never updated. But system is behaving very bad. Even touch works only when it wants (maybe physical damage, but I want to have new WM). But installation stops at 1% and phone reboots. Problem is that I have set a password on WM. There is a problem with touch in menu, so I can't remove it. May that be the problem that this secure makes flashing even stock roms impossible? I have no free SD, so only flash via RUU.
Click to expand...
Click to collapse
Have you tried a hard reset? I believe it's called "Clear Storage" from settings.
Or hold talk/send + power + vol down while the device is OFF.

I can't clear storage because touch is broken in menu. That's why I want to reinstall it.

kubekpop said:
I can't clear storage because touch is broken in menu. That's why I want to reinstall it.
Click to expand...
Click to collapse
Then do my other suggestion...

But it doesn't work. It boots into bootloader. Does it work for you?

kubekpop said:
But it doesn't work. It boots into bootloader. Does it work for you?
Click to expand...
Click to collapse
Perhaps those weren't the right keypresses...
Try this:
A Hard Reset restores the device to its default settings — the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
There are 2 ways to perform a Hard Reset on this device:
Menu Path
Access the Settings Tab>All Settings>System>Clear Storage
Follow the onscreen instructions.
Keystroke Method
1. With the device turned off, press and hold the VOLUME DOWN, TALK/SEND, and END/POWER buttons until you see this message on the screen.
2. This operation will delete all your personal data, and reset all settings to manufacturer default. Press Vol Up to restore manufacturer default, or press other keys to cancel.
3. Release the VOLUME DOWN, TALK/SEND, and END/POWER buttons.
4. Press the VOLUME UP button to restore the operating system to the factory default configuration, press the VOLUME DOWN button to restore the factory default configuration and remove any operator customization, or press any other button to cancel the reset.
Click to expand...
Click to collapse

Ok, I will try this when I will heve access to it It's my friend's phone, I wanted to help. GR8 THX, I hope it will help.

Factory Reset, (Bricked Device)

Weell it looks like they do help people out, although it took the a month bbut hey i already have a replacement ouya from gamestop, making this information something useful for future references, maybe this helps with other things too, this weas sent by the developer team at ouya
Piers (OUYA Support)
Hi,
I hope this finds you well. In the interest of time it sounds like your OUYA may be bricked, but there's a fairly good chance you can recovery your OUYA. Please follow the steps below and let me know if this has restored your OUYA. Thanks, and sorry about our delay in responding!
Best regards,
Piers Sutton
Developer Support
1) Plug a USB keyboard into your OUYA while it's powered off.
2) Power on your OUYA and let it boot as far as it can.
2.5) Find the sysreq key on your keyboard. On most extended keyboards, it is Print Screen.
3) Hold down Alt and Print Screen
4) Press and hold ALT and Print Screen (sysreq) Key.
5) Press i and hold for 5 seconds then release. Repeat this step for 30-45 seconds.
6) Press the HOME key
7) Select "wipe data/factory reset" and hit Enter key.
8) Select "Yes -- delete all user data" and hit Enter key.
9) Select "wipe cache partition" and hit Enter key.
10) Select "reboot system now" and hit Enter key.

treborbula1 said:
1) Plug a USB keyboard into your OUYA while it's powered off.
2) Power on your OUYA and let it boot as far as it can.
2.5) Find the sysreq key on your keyboard. On most extended keyboards, it is Print Screen.
3) Hold down Alt and Print Screen
4) Press and hold ALT and Print Screen (sysreq) Key.
5) Press i and hold for 5 seconds then release. Repeat this step for 30-45 seconds.
6) Press the HOME key
7) Select "wipe data/factory reset" and hit Enter key.
8) Select "Yes -- delete all user data" and hit Enter key.
9) Select "wipe cache partition" and hit Enter key.
10) Select "reboot system now" and hit Enter key.
Click to expand...
Click to collapse
sorry you didn't find this forums earlier. we could have probably helped you out without getting a replacement console.
thanks for the write up though. this same info is already on here (a bunch of different places) but having it again never hurts.
now that you have a working console, look into CWM. its a replacement Recovery Mode that gives you a lot more options and is easier to access. from recovery, you can also re-flash a stock update and that will help A LOT in brick situations.
just ask around for help. and use the search function. not necessarily in that order :silly:

treborbula1 said:
Weell it looks like they do help people out, although it took the a month bbut hey i already have a replacement ouya from gamestop, making this information something useful for future references, maybe this helps with other things too, this weas sent by the developer team at ouya
Piers (OUYA Support)
Hi,
I hope this finds you well. In the interest of time it sounds like your OUYA may be bricked, but there's a fairly good chance you can recovery your OUYA. Please follow the steps below and let me know if this has restored your OUYA. Thanks, and sorry about our delay in responding!
Best regards,
Piers Sutton
Developer Support
1) Plug a USB keyboard into your OUYA while it's powered off.
2) Power on your OUYA and let it boot as far as it can.
2.5) Find the sysreq key on your keyboard. On most extended keyboards, it is Print Screen.
3) Hold down Alt and Print Screen
4) Press and hold ALT and Print Screen (sysreq) Key.
5) Press i and hold for 5 seconds then release. Repeat this step for 30-45 seconds.
6) Press the HOME key
7) Select "wipe data/factory reset" and hit Enter key.
8) Select "Yes -- delete all user data" and hit Enter key.
9) Select "wipe cache partition" and hit Enter key.
10) Select "reboot system now" and hit Enter key.
Click to expand...
Click to collapse
Wow I never knew you could do this! Thanks for writing this up, it might be very useful someday

This is known. But if OUYA is sending this out as their tech support, you'd think they would see the benefit in giving us an easy way into recovery, instead of making us think we are an insignificant minority.
I'm glad you got a replacement, but I am still dissappointed in OUYA reguarding this issue.
Sent from my HTC One using xda premium

adb sideload
I've tired to wipe cache and user data. But my OUYA still can't boot.
Then I tried, to sideload:
adb sideload RC-OUYA-1.0.328-r1_ota.zip
but I got the following error message:
assert failed: !less_than_int(1368745818, getprop("ro.build.date.utc")
Installation aborted.
How can I sideload an ouya ROM?

im not sure you can sideload a ouya rom, you need root and a recovery to flash a rom, just in case and pardon my ignorance but i havent looked into it much, but try searching the ouya forum, that'll help

You cant flash an ota over a broken or custom rom since ota dont contain the full os but just the changes for the update. We would need a propper backup or system dump etc to flash from recovery or an IMG to flash via fastboot.
Gesendet von meinem One X+ mit Tapatalk 4

treborbula1 said:
1) Plug a USB keyboard into your OUYA while it's powered off.
2) Power on your OUYA and let it boot as far as it can.
2.5) Find the sysreq key on your keyboard. On most extended keyboards, it is Print Screen.
3) Hold down Alt and Print Screen
4) Press and hold ALT and Print Screen (sysreq) Key.
5) Press i and hold for 5 seconds then release. Repeat this step for 30-45 seconds.
6) Press the HOME key
7) Select "wipe data/factory reset" and hit Enter key.
8) Select "Yes -- delete all user data" and hit Enter key.
9) Select "wipe cache partition" and hit Enter key.
10) Select "reboot system now" and hit Enter key.
Click to expand...
Click to collapse
Why are steps 3 and 4 the same?
Please, double-check your post for clarity. How long are we supposed to hold down ALT+PrintScr, how many times are we supposed to press them?

I believe it is a case of bashing away on the key as much as possible to hopefully hit it at the right time. Very hit and miss
Sent from my Nexus 5 using xda app-developers app

My understanding is this is the process for a 'hard reset' correct? A complete reinstall of the OS wiping back to factory (not a factory reset).
I ask because I have xposed and the mod collect and would like to completely wipe any modification and start fresh.
Additionally, you do not need to adb the OS in correct? Other instructions stated you needed to side load an ota (a newer version at that) and I would prefer not to have to adb in.
Last question. My TV shows no input when you hit the 'home' key following the above steps. I'm assuming its just defaulting to a resolution my TV cannot display, not a problem with the bootloader?
Stock ROM BTW.

robinscp said:
I believe it is a case of bashing away on the key as much as possible to hopefully hit it at the right time. Very hit and miss
Sent from my Nexus 5 using xda app-developers app
Click to expand...
Click to collapse
Don't know if this will help anyone.
In my case it was going into update mode, rebooting and then getting the red exclamation mark, it would reboot, try to do the update and go back to the exclamation mark again, just cycling through, and through, and through and...
I couldn't get ALT-PrintScreen to work, and it was p*ssing me off royally. Then during the loading update part I pressed the ESC key basically in frustration, which cancelled update and took me back to the menu and I did the factory reset through the System menu option. I now have a working Ouya.
After a few hours of struggling with the ALT-PrintScreen option I was surprised by my accidental result.

tazeo said:
Don't know if this will help anyone.
In my case it was going into update mode, rebooting and then getting the red exclamation mark, it would reboot, try to do the update and go back to the exclamation mark again, just cycling through, and through, and through and...
I couldn't get ALT-PrintScreen to work, and it was p*ssing me off royally. Then during the loading update part I pressed the ESC key basically in frustration, which cancelled update and took me back to the menu and I did the factory reset through the System menu option. I now have a working Ouya.
After a few hours of struggling with the ALT-PrintScreen option I was surprised by my accidental result.
Click to expand...
Click to collapse
Used your accidental method and works like a charm

I really bricked this thing and need help
I totally borked my ouya and think it's bricked...
I flashed safe recovery and then flashed CWM from within that and got stuck in the boot loop.
I then side loaded a rom which changed nothing. In an attempt to get out of the cwm--safe recovery loop, I flashed the bootloader (with apparently no kernel) and now have persistent black screen.
I am unable to get anything working via alt-prt scrn-i combo even using home button and device no longer shows up in ADB or in windows.
Am wondering if anyone has any last ideas?
Thanks,
Josh

Jc_Dent0n said:
I've tired to wipe cache and user data. But my OUYA still can't boot.
Then I tried, to sideload:
adb sideload RC-OUYA-1.0.328-r1_ota.zip
but I got the following error message:
assert failed: !less_than_int(1368745818, getprop("ro.build.date.utc")
Installation aborted.
How can I sideload an ouya ROM?
Click to expand...
Click to collapse
You can only sideload a rom which is the same version currently installed or newer, trying to sideload an older rom will give this error message.
took me ages to work this out.

Need help here guys.
I reinstalled CWM and wiped dalvik/cache
Now I cant even boot to recovery no matter how I tried.
I can access the OUYA through the micro usb and can read the file structure from my Mac
How do I restore?

Brickt my ouya trying to flash a recovery.
Flashed it using fastboot. Since then it always boots into CWM, I can see the CWM logo, but thats all thats on the screen. ADB sees my ouya, sometimes, but trying to do anything gives me a protocol fault (no status)
Now Im trying to use this to just reset everything but at about the 4th or 5th time pressing i with alt and sysreq my ouya powers down...
Anyone have any advice?

moku160 said:
Brickt my ouya trying to flash a recovery.
Flashed it using fastboot. Since then it always boots into CWM, I can see the CWM logo, but thats all thats on the screen. ADB sees my ouya, sometimes, but trying to do anything gives me a protocol fault (no status)
Now Im trying to use this to just reset everything but at about the 4th or 5th time pressing i with alt and sysreq my ouya powers down...
Anyone have any advice?
Click to expand...
Click to collapse
Same thing happens to me when I try the recovery. What is the last thing you see when hitting the key combinations? U Splash screen?

substance.v said:
Same thing happens to me when I try the recovery. What is the last thing you see when hitting the key combinations? U Splash screen?
Click to expand...
Click to collapse
The last thing I see, the only thing I see ever, Is the background with the gear and hat for CWM recovery. No menu just the background. After pressing the buttons down for 4 or 5 times it powers down. That's it

moku160 said:
The last thing I see, the only thing I see ever, Is the background with the gear and hat for CWM recovery. No menu just the background. After pressing the buttons down for 4 or 5 times it powers down. That's it
Click to expand...
Click to collapse
Is it possible to post a screen shot with your phone. also connect it to your computer via usb and show us a screen shot of your device manager?
Make sure you have the drivers installed.
Regards-

moku160 said:
The last thing I see, the only thing I see ever, Is the background with the gear and hat for CWM recovery. No menu just the background. After pressing the buttons down for 4 or 5 times it powers down. That's it
Click to expand...
Click to collapse
I got fixed... so lets try this.. power one OUYA with keyboard attached. As soon as the LED lights up on the unit... press alt+sysrq+i .. keeping alt and sysrq pressed .. tap the I until your screen blinks twice. this should bring you into the recovery mode. If your ouya is connected to a computer, you will here a chime.. you device manager should show this as Android Composite ADB interface. from here you can push your image and flash ROMS and such.. hopes this helps

[Q] Touch screen not working. Want to do factory reset

Touchscreen of my micromax A210 suddenly stopped responding. I tried the hard reset with 3 buttons. It comes to the screen where it asks to select options to do factory reset. However to select this option, it says to press "Enter" button. Since the touch is not working I can't select the option.
I want to erase all data before giving it at service center for repairs as the phone is still under warranty. Please help on how I can do factory reset without the touch screen.
Appreciate your help.

SANMINT said:
Touchscreen of my micromax A210 suddenly stopped responding. I tried the hard reset with 3 buttons. It comes to the screen where it asks to select options to do factory reset. However to select this option, it says to press "Enter" button. Since the touch is not working I can't select the option.
I want to erase all data before giving it at service center for repairs as the phone is still under warranty. Please help on how I can do factory reset without the touch screen.
Appreciate your help.
Click to expand...
Click to collapse
USE this method....it's works
http://forum.gsmhosting.com/vbb/f811/micromax-canvas-4-hard-reset-done-1742135/

Options key does not work
007jigar said:
USE this method....it's works
Click to expand...
Click to collapse
Thanks. The options key is not working. Caz the whole touch pad is not responding.
Is there any other way to select the wipeout option?

SANMINT said:
Thanks. The options key is not working. Caz the whole touch pad is not responding.
Is there any other way to select the wipeout option?
Click to expand...
Click to collapse
try mobogenie for pc or any alternative software...i think it's directly connect storage to your pc..so u easily wipe out your internal or sd...
http://www.mobogenie.com/pc.html

try this ! it may help
SANMINT said:
Touchscreen of my micromax A210 suddenly stopped responding. I tried the hard reset with 3 buttons. It comes to the screen where it asks to select options to do factory reset. However to select this option, it says to press "Enter" button. Since the touch is not working I can't select the option.
I want to erase all data before giving it at service center for repairs as the phone is still under warranty. Please help on how I can do factory reset without the touch screen.
Appreciate your help.
Click to expand...
Click to collapse
Sign in to your Google Account on android.com/devicemanager.
If you have more than one device, click the arrow next to the device name to select a different device.
Select any of the following options in the top left corner of the screen:
Ring: Rings your device at full volume for 5 minutes - even if it’s set to silent or vibrate.
Lock: Locks your device with a new password.
Erase: Permanently deletes all of your data.

yogesh.kalyana said:
Sign in to your Google Account on android.com/devicemanager.
If you have more than one device, click the arrow next to the device name to select a different device.
Select any of the following options in the top left corner of the screen:
Ring: Rings your device at full volume for 5 minutes - even if it’s set to silent or vibrate.
Lock: Locks your device with a new password.
Erase: Permanently deletes all of your data.
Click to expand...
Click to collapse
Thanks but No luck. It asks to setup first and sends some link to the phone to activate. Without the touch working, I cant activate. Any other way?

The issue got resolved. Dont know how. Today the touch screen started responding. The only difference I can say is I charged it with a nokia phone charger yesterday. All other things remain the same. This may be a coincidence but it seems to working for me now.

micromax A311 nitro screen not working. Display is okk but touch is not working.what should i do?

Lg g3 bootloop finally got fixed !

found a very simple yet damn effective way to get out of numbing LG G3 D855 bootlooping loops ! but guys in the process i seem to have forgotten a few steps...shi* ! but dont worry yet. it should come right up....its there. just let me freshen up before tracing back those vital moves that i reluctantly made on(lets see whether it works fine and if not...? mode !)......and voila...it worked magic...! what i now regret is the screen rec. had i been hit with the idea even before getting in there in the first place !

Ok where is the method?

?????????????????????????????????????????????????

OK here it is : first reboot into recovery Twrp( by holding down both Power+Vol-Down buttons while device on power-off state ! that brings up usual LG Logo screen..the minute it appears just let go of the buttons at the same time.. simultaneously strike back and hold them down again. of course this lets us enter into Twrp Recovery Mode. Now... first off, hit the Factory Reset button. as soon as its done with go ahead and hit the Restore button next... it pulls up the screen that says: select Package to Restore... get that package below checked. on the next make sure all these system/data/boot are checked as well. no need to enable MDS verification at the bottom...Swipe what it says swipe to..... ! finally...that unforgetable sxcy 'reboot into system' Lo and behold..........! *

ehhbi said:
OK here it is : first reboot into recovery Twrp( by holding down both Power+Vol-Down buttons while device on power-off state ! that brings up usual LG Logo screen..the minute it appears just let go of the buttons at the same time.. simultaneously strike back and hold them down again. of course this lets us enter into Twrp Recovery Mode. Now... first off, hit the Factory Reset button. as soon as its done with go ahead and hit the Restore button next... it pulls up the screen that says: select Package to Restore... get that package below checked. on the next make sure all these system/data/boot are checked as well. no need to enable MDS verification at the bottom...Swipe what it says swipe to..... ! finally...that unforgetable sxcy 'reboot into system' Lo and behold..........! *
Click to expand...
Click to collapse
Hahaha its a simple restore of ur backup ....everyone knows this no big deal

Mods kindly look into such posts.no need of them.

Dude, seriously? I have to treat my phone like cancerous tumor about to burst because god knows what triggers that reboot, trawling all over the web if somebody found a solution and then this shows up.

Threads not very contributive and is misleading. Closed.