[Q]HTC Desire after flash RUU die - Desire Q&A, Help & Troubleshooting

GD!
I ran into a problem: (
Began to establish Ruu firmware RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_
signed.exe
After that, during the installation stage to Install System ...... error 152
On the phone and after band red on the screen here it is.
AlphaRev CM7 r2
Bravo PVT4 SHIP S-0FF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
AUG 10 2010, 17:52:18
RUU
[1] BOOTLOADER - Bypassed
[2] RADIO_V2 - OK
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - OK
[8] SPLASH1 - OK
Partition update fail!
Update Fail!
Help put the original firmware: (

you need to instal the hboot downgrade and then instal the ruu ive made this mistake on my phone but now the phone is okey dont try to instal the hboots again and again and again and diferent hboot again because you break your phone try to instal the hboot downgrade you will find on alpharev and then instal the ruu and workks

Downgrate to 0.80 or 0.75???
P.S. i can't run Hboot + Fastboot (-vol + pwr) don't work)

Run the Bravo HBOOT Downgrader from Alpharev.nl
The .IMG file (via fastboot or android flasher)
The .ZIP file (rename it to PB99IMG.ZIP then put on the SD Card)
Then run the RUU again.

davebugyi said:
Run the Bravo HBOOT Downgrader from Alpharev.nl
The .IMG file (via fastboot or android flasher)
The .ZIP file (rename it to PB99IMG.ZIP then put on the SD Card)
Then run the RUU again.
Click to expand...
Click to collapse
but how i do that if hboot and fastboot don't work ((((

Solved the problem
Simply set Alpha Rev Stock Bravo and all Ruu established, the problem was that CM r2 not allowed to install System because no free space on phone:
Name /system /cache /data
Bravo Stock 250M 40M 147M
Bravo CM7 r2 145M 5M 287M

GeFGear said:
Solved the problem
Simply set Alpha Rev Stock Bravo and all Ruu established, the problem was that CM r2 not allowed to install System because no free space on phone:
Name /system /cache /data
Bravo Stock 250M 40M 147M
Bravo CM7 r2 145M 5M 287M
Click to expand...
Click to collapse
LOL, that's what I said.
Glas, you've solved it.

..I am having the same problem. Can You explain to me how exactly did you set the stock hboot ??? thanks

ethr said:
..I am having the same problem. Can You explain to me how exactly did you set the stock hboot ??? thanks
Click to expand...
Click to collapse
Just read second last post by davebugyi.
Sent from Oxygen

Looks like the keyword was android flasher )) thank you veryy much

GeFGear said:
GD!
I ran into a problem: (
Began to establish Ruu firmware RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_
signed.exe
[...] (
Click to expand...
Click to collapse
Hi,
I've got the same problem. But my Desire says:
Bravo PVT4 SHIP S-0N
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
AUG 10 2010, 17:52:18
[...]
any ideas how to get it back working again?

is someone who have this 405.5 in .zip maybe? so i can rename it in PB99IMG....please?

rawdealer said:
is someone who have this 405.5 in .zip maybe? so i can rename it in PB99IMG....please?
Click to expand...
Click to collapse
If you have the RUU.. run the RUU
And click on start .. Run.... and type %TEMP%
look for the directoy with big name of some random alphabat and numbers...
Inside that directory you will get rom.zip rename it to PB99IMG.zip

pls help me gefgear
GeFGear said:
Solved the problem
Simply set Alpha Rev Stock Bravo and all Ruu established, the problem was that CM r2 not allowed to install System because no free space on phone:
Name /system /cache /data
Bravo Stock 250M 40M 147M
Bravo CM7 r2 145M 5M 287M
Click to expand...
Click to collapse
my htc desire have same scenario with you.pls tell the steps on how to go to hboot.my hboot is not working.and how to fix it...

kimwell24 said:
my htc desire have same scenario with you.pls tell the steps on how to go to hboot.my hboot is not working.and how to fix it...
Click to expand...
Click to collapse
Troubleshooting thread: http://forum.xda-developers.com/showthread.php?t=1275632

Related

[Q] HBoot update

Hi,
Im keep getting crashes and boot loops on a few new roms with D2EXT D2WE im using HBoot with
BRAVO PVT1 SHIP S-ON <--- used unrevoked so why is it still s-on ?
HBOOT-0.00.0000
MICROP-031d
TOCUH PANEL-SYNT0101
RADIO-5.09.00.08
Amoled Desire GSM
Click to expand...
Click to collapse
i want to upgrade to Alpharev v1.8 Bravo_CM7 ... is there a new way to do or do i real have to create a gold card and so on .... anyway how to get into FASTBOOT and what are the right commands i have to type in my console on PC (win7 or ubuntu)
help !! thx in advance
nvm ... soulution .iso

Bricked phone

Be very careful if you try flashing a RUU and are using a Oxygen HBOOT - Don't make the same mistake as me which resulted in an bricked phone.
Before you flash the RUU it seems that it will be an good idea to flash the standard Bravo Stock HBOOT before proceeding with the RUU.
This is the result of my flashing - Only the RUU program can access the phone but fails.
(I followed these instructions: http://oxygenrom.com/viewtopic.php?f=5&t=190 )
AlphaRev Oxygen r2
BRAVO PVT1 SHIP S-OFF
HBOOT-6.93.1002
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
RUU
[1] BOOTLOADER - Bypassed
[2] RADIO_V2 - OK
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - OK
[8] SPLASH1 - OK
[9] SPLASH2 - OK
Partition update fail!
Update Fail!
use android flasher to flash bravo downgrader from alpharev.nl and then the ruu and that is it.
dzumagos said:
use android flasher to flash bravo downgrader from alpharev.nl and then the ruu and that is it.
Click to expand...
Click to collapse
Thanks, Android flasher did the trick
Bricked is so overused word these days...

HTC Desire Bricked or there is still some hope?

Hi people i have a s-off desire with alpharev cm7r2 HBOOT and was stucked on the htc quietly brilliant logo when was booting and i decided to install a stock RUU and i had a error 110 during the installation and now when i turn on my phone it have the htc logo with 4 exclamation triangles in the corners,i cant enter fastboot,bootloader acess the sd card...i cant do nothing i tried with all the RUU that i find and it always stuck on the system part when te RUU is installing,then i have the 110 error....
Only that i see after the RUU fails is this
White screen with this text:
Alpharev CM/ r2
Bravo PVT4 SHIP S-OFF
MICROP 051d
TOUCH PANEL-SYNW0101
RADIO-4,05,00,11
August 10 2010,17:52:18
Any chance to do something?
Please help me people!
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
OMG man i love you!!!!!!!!!!!! i spend 3 long days to figure what to do and it was so simple.....thanks a lot! Solved now!
I was also worried when I saw these triangles
(They are very scary )
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
smileking said:
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Click to expand...
Click to collapse
You can flash another HBOOT from fastboot mode. Your device must be S-OFF.
To boot in fastboot mode, turn off your phone, press vol down button, and then power button, you will be in HBOOT mode. First entry of the menu is Fastboot. Select it with power button. You can flash another hboot from here.
To flash an hboot, you must have the fastboot binary for your computer.
You can find them here :
http://developer.htc.com/adp.html (search for fastboot, you will have download links for Windows, mac os x and linux)
First, check that your device is detected :
Code:
fastboot.exe devices (Windows)
Code:
./fastboot(-mac) devices (Mac OS X / Linux)
It should return something like this :
Code:
SH******* fastboot (numbers after SH are different for each device)
Next, download the hboot you want to flash, and run the fastboot binary via console, terminal, or whatever you want with the following :
Code:
fastboot.exe flash hboot name_of_hboot.img [B](Windows)[/B]
Code:
./fastboot(-mac) flash hboot name_of_hboot.img [B](Mac OS X / Linux)[/B]
Or, if you are on Windows, you can use AndroidFlasher (link), which does the same, but with a graphical interface.
to install a new HBOOT your device needs to be S-OFF, you can use fastboot commander to do so. for fastboot commander to work you will need adb drivers and java sdk. Then download a HBOOT from the alpharev.nl website.
NOTE: if you have a HBOOT from alpharev, and you run a RUU IT WILL NOT RESTORE THE HBOOT TO THE STOCK VERSION therefore, if you wish to fully unroot, you firstly need to flash the downgrader (also found on alpharev), and then run the RUU.
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
paulino633 said:
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
Click to expand...
Click to collapse
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
same issue help me please.
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
prasannaek said:
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
Click to expand...
Click to collapse
petidis said:
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
Click to expand...
Click to collapse
Hi guys
There is a guide on top of Q&A section... why not use it? Please hit the thanks button there... he deserves it

[HELP] Desire only fastboot working

Hy everybody, I have a "bricked" HTC Desire (I don't know GSM/CDMA).
And only HBOOT and fastboot mode working (Volume-Down + PowerOn)
(Recovery doesn't work, and phone freeze/bootloop at HTC logo)
I have a GoldCard, but when i flashing (PB99IMG.zip) freeze at "RADIO_V2" and still "Updating...".
(I tried many RUU, but the problem same)
But the boot-image flashed ok before the "RADIO_V2" so i can 'change' the hboot version 0.80 -> 0.93 and 0.93 -> 0.80
And i have "S-ON" so i can't flash trough fastboot.exe, Someone have Desire "S-OFF"-ed hboot? (i need xy.nb0 and i will overwrite in PB99IMG.zip and try flash with GoldCard)
Plz help me!
(And sorry for my "english" )
Edit:
Code:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.09.00.20
Mar 29 2010,21:34:33
[HBOOT]
Parsing...[SD ZIP]
[1] BOOT - OK
[2] BOOTLOADER - OK
[3] RADIO_V2 - Updating {freeze}
...
Do you want to start update?
<VOL UP> Yes
<VOL DOWN> No
Update in progress...
Do not power off the device!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Checked bortak's troubleshooting guide?
Yes, but RUU give me "Connection error"
(Drivers ok -> fastboot.exe list the device)
And in the phone screen is red [Fastboot USB]
try PB99IMG method
MiloX8 said:
I have a GoldCard, but when i flashing (PB99IMG.zip) freeze at "RADIO_V2" and still "Updating...".
Click to expand...
Click to collapse
I tried, but /\
Update in first post

[Q] Stuck without ROM and S-ON

Hello.
I was on CM7 since 1 year ago. I remember that I gain root access with unrevooked and then I flash the rom directly...
So yesterday I decided to install a new rom for my Desire (paranoid). So i format I format my SD-CARD + ext-4 partitioning... Wipe everything, flash the Rom and Gapps successfully. And then I'm stuck HTC logo.
So after 4 hours of searching everywhere the conclusion is :
- I'm not S-OFF
- I can't re flash CM7
- I can't make a GOLDCARD, and haven't found a correct RUU with no ID error.
- I read everything of this http://forum.xda-developers.com/showthread.php?t=1275632 and I dont know where to start, and most of tutorials says to connect the phone in debug mode but i haven't got rom (Possible via hboot?)
- fastboot working
- recovery always here
What I should do? I can't S-OFF without debug. And can't make a GOLDCARD even with a CID obtenned without rom.
Thanks for your help and sorry for my bad english.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
+ ClockworkMod Recovery V2.5.0.7
And by wipe everything you meant formating /data and /system? You've done that? It's a very old recovery.try flashing 4ext from fastboot image file.

Categories

Resources