Related
I tried to flash a new splash using android flasher 1.6.1 and it didn't worked out.
I tried to do it using ADB and it's write to me :
sending 'splash1' (750KB)...
OKAY [0.118s]
writing 'splash1'...
FAILED (remote:not allowed)
finished.total time 0.119s
I am using Cyanogen7 ROM and I have S-OFF :
BRAVO PV4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
Can please someone help me ?
fastboot flash?
ghalalb said:
fastboot flash?
Click to expand...
Click to collapse
yes
Im trying to change the splash picture.
sorry, I should have explained myself, have you flashed from fastboot or adb only? I'm sure you have to do it from fastboot not adb, there is a tut on here somewhere, but i can't find the link for it
could try this method though i've not
http://forum.xda-developers.com/showthread.php?t=794638
AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods
found the method I used
http://forum.xda-developers.com/showthread.php?t=795132&highlight=fastboot+flash+splash1
AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods
That method worked for me too, nice
I tried to do it with fastboot ,still don't work for me.
it says it's all done but nothing happends.
I also tried to do the S-OFF again and it give me the next error:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
I dont understand what's wrong ?
I use android flasher. Its damn easy for noobs. I'm not a noob, but I'm lazy enough to use it.
I have also tried with Android Flasher but still doesn't work...
kleinyair said:
I tried to do it with fastboot ,still don't work for me.
it says it's all done but nothing happends.
I also tried to do the S-OFF again and it give me the next error:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
I dont understand what's wrong ?
Click to expand...
Click to collapse
I think, you should write this problem on irc.freenode.net, channel #alpharev
Don't know what's the problem, but think the guys from alpharev-team could help here...
Sent from my HTC Desire using XDA App
anderl78 said:
I think, you should write this problem on irc.freenode.net, channel #alpharev
Don't know what's the problem, but think the guys from alpharev-team could help here...
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
How do I use the IRC ?
I tried to write it in my exlorer,didn't go nowhere.
I'm sorry I'm quite new here.
And your fastboot/hboot does say something like aplpharev on the top? If that is the case it will also work if you do it right when booted into fastboot. I might be able to guide you through it.
If that is not the case, something is wrong, and you will need to run alpharev again.
I also dont get how your cid can be 11111111, as that definitely does not look right. Try booting to fastboot and run "fastboot oem boot" and write the cid it throws out it should be something like HTC_Y13
mortenmhp said:
And your fastboot/hboot does say something like aplpharev on the top? If that is the case it will also work if you do it right when booted into fastboot. I might be able to guide you through it.
If that is not the case, something is wrong, and you will need to run alpharev again.
I also dont get how your cid can be 11111111, as that definitely does not look right. Try booting to fastboot and run "fastboot oem boot" and write the cid it throws out it should be something like HTC_Y13
Click to expand...
Click to collapse
My hboot doesn't say nothing about alpharev i got it allready s-off from the store,thats what it write on my hboot:
BRAVO PV4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.14
I run fastboot oem boot and this is the reasult:
I will very appreciate if you could please help me.
Try the alpha rev s-off method (bootcd) then try again with the gui tool
isit-LoVe said:
Try the alpha rev s-off method (bootcd) then try again with the gui tool
Click to expand...
Click to collapse
I have allready tried with alpharev bootcd and it gave me:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
what do you mean gui tool ?
seems like your phone uses an alternative s-off method or its just faking S-OFF (only displaying it on screen)
i googled for about 15 mins and found this: http://4pda.ru/forum/index.php?showtopic=180832&st=12640#entry6668455
use google language translator for other language
When you try to get the S-OFF:
identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT VERSION: 0.93.0001
SCREEN TYPE:
Your phone was not recognized or is unsuported at this time.
Have:
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.14.05.17
Aug 10, 2010 17:52:18
Telephone gray, root mean.
Beat 3 months, finally found the solution:
when alpharev gives Your phone was not recognized or is unsuported at this time.
disable the phone from the wire
Hit Ctrl + C
see $
write vi alpharev.sh Hit Enter
cursor down to 117 lines, where it is written PB9920000 remove zeros that would get PB992
Hit Shift colon and write wq
see $
write. / alpharev.sh
process will start again on the instructions of obtaining s-off
ps. sewed with flash
Click to expand...
Click to collapse
gui tool i mean android flasher but after you successfully flashed with alpha rev :/
I tried the process,I changed the PB9920000 to PB992 but I dont understand what is that mean :"Hit Shift colon and write wq"
what is shift colon ?
Edit :O.K I figured it out !!!!
after I changed the num to PB992 I pushed Shift+Z
and I wrote :" ./ alpharev.sh "and Enter
It start all over from the begining and its all working good now.
Thank you very much...
His phone is s-off alright, but it has somehow been delivered that way, so you have got a phone, which were meant for development or a store demo device(have seen the same issue on store demo devices).
The problem is, that this is real s-off, which means it's set by a flag on a low level of the nand, so he still has the original bootloader, which doesn't support fastboot commands. And because it's a development device it's got cid 11111111, which is wrong and makes alpharev recognize it as a different/non existing device. You should be able to flash it in another way because as you are s-off, you can make the recovery ask the bootloader to flash low level stuff like splash, and the bootloader is s-off, so it shouldn't check for anything. You might need some specialist aka the ones from alpharev though if they are interested in helping you.
edit: As it is s-off it might very well be able to flash one of the pb99img.zip files containing the alpharev hboot found on the alpharev site because it will accept them as if they were from HTC, so just put them on the sd-card with the right name and reboot to the bootloader. This way you might be able to activate fastboot commands, and start flashing the same way we do. This requires that those images will work normally on your phone, so i would still ask the alpharev guys so you don't risk a brick.
i agree with mortenmhp asking alpharev is probably the best idea
shift colon is probably :
in the editor vi you use ":wq" to tell the programm to save stuff and exit the editor
How can I make contact with alpharev ?
I didn't understant how to use the IRC...
GD!
I ran into a problem: (
Began to establish Ruu firmware RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_
signed.exe
After that, during the installation stage to Install System ...... error 152
On the phone and after band red on the screen here it is.
AlphaRev CM7 r2
Bravo PVT4 SHIP S-0FF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
AUG 10 2010, 17:52:18
RUU
[1] BOOTLOADER - Bypassed
[2] RADIO_V2 - OK
[3] RADIO_CUST - OK
[4] BOOT - OK
[5] RECOVERY - OK
[6] SYSTEM - Fail-PU
[7] USERDATA - OK
[8] SPLASH1 - OK
Partition update fail!
Update Fail!
Help put the original firmware: (
you need to instal the hboot downgrade and then instal the ruu ive made this mistake on my phone but now the phone is okey dont try to instal the hboots again and again and again and diferent hboot again because you break your phone try to instal the hboot downgrade you will find on alpharev and then instal the ruu and workks
Downgrate to 0.80 or 0.75???
P.S. i can't run Hboot + Fastboot (-vol + pwr) don't work)
Run the Bravo HBOOT Downgrader from Alpharev.nl
The .IMG file (via fastboot or android flasher)
The .ZIP file (rename it to PB99IMG.ZIP then put on the SD Card)
Then run the RUU again.
davebugyi said:
Run the Bravo HBOOT Downgrader from Alpharev.nl
The .IMG file (via fastboot or android flasher)
The .ZIP file (rename it to PB99IMG.ZIP then put on the SD Card)
Then run the RUU again.
Click to expand...
Click to collapse
but how i do that if hboot and fastboot don't work ((((
Solved the problem
Simply set Alpha Rev Stock Bravo and all Ruu established, the problem was that CM r2 not allowed to install System because no free space on phone:
Name /system /cache /data
Bravo Stock 250M 40M 147M
Bravo CM7 r2 145M 5M 287M
GeFGear said:
Solved the problem
Simply set Alpha Rev Stock Bravo and all Ruu established, the problem was that CM r2 not allowed to install System because no free space on phone:
Name /system /cache /data
Bravo Stock 250M 40M 147M
Bravo CM7 r2 145M 5M 287M
Click to expand...
Click to collapse
LOL, that's what I said.
Glas, you've solved it.
..I am having the same problem. Can You explain to me how exactly did you set the stock hboot ??? thanks
ethr said:
..I am having the same problem. Can You explain to me how exactly did you set the stock hboot ??? thanks
Click to expand...
Click to collapse
Just read second last post by davebugyi.
Sent from Oxygen
Looks like the keyword was android flasher )) thank you veryy much
GeFGear said:
GD!
I ran into a problem: (
Began to establish Ruu firmware RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_
signed.exe
[...] (
Click to expand...
Click to collapse
Hi,
I've got the same problem. But my Desire says:
Bravo PVT4 SHIP S-0N
HBOOT-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
AUG 10 2010, 17:52:18
[...]
any ideas how to get it back working again?
is someone who have this 405.5 in .zip maybe? so i can rename it in PB99IMG....please?
rawdealer said:
is someone who have this 405.5 in .zip maybe? so i can rename it in PB99IMG....please?
Click to expand...
Click to collapse
If you have the RUU.. run the RUU
And click on start .. Run.... and type %TEMP%
look for the directoy with big name of some random alphabat and numbers...
Inside that directory you will get rom.zip rename it to PB99IMG.zip
pls help me gefgear
GeFGear said:
Solved the problem
Simply set Alpha Rev Stock Bravo and all Ruu established, the problem was that CM r2 not allowed to install System because no free space on phone:
Name /system /cache /data
Bravo Stock 250M 40M 147M
Bravo CM7 r2 145M 5M 287M
Click to expand...
Click to collapse
my htc desire have same scenario with you.pls tell the steps on how to go to hboot.my hboot is not working.and how to fix it...
kimwell24 said:
my htc desire have same scenario with you.pls tell the steps on how to go to hboot.my hboot is not working.and how to fix it...
Click to expand...
Click to collapse
Troubleshooting thread: http://forum.xda-developers.com/showthread.php?t=1275632
Hi people i have a s-off desire with alpharev cm7r2 HBOOT and was stucked on the htc quietly brilliant logo when was booting and i decided to install a stock RUU and i had a error 110 during the installation and now when i turn on my phone it have the htc logo with 4 exclamation triangles in the corners,i cant enter fastboot,bootloader acess the sd card...i cant do nothing i tried with all the RUU that i find and it always stuck on the system part when te RUU is installing,then i have the 110 error....
Only that i see after the RUU fails is this
White screen with this text:
Alpharev CM/ r2
Bravo PVT4 SHIP S-OFF
MICROP 051d
TOUCH PANEL-SYNW0101
RADIO-4,05,00,11
August 10 2010,17:52:18
Any chance to do something?
Please help me people!
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
OMG man i love you!!!!!!!!!!!! i spend 3 long days to figure what to do and it was so simple.....thanks a lot! Solved now!
I was also worried when I saw these triangles
(They are very scary )
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
smileking said:
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Click to expand...
Click to collapse
You can flash another HBOOT from fastboot mode. Your device must be S-OFF.
To boot in fastboot mode, turn off your phone, press vol down button, and then power button, you will be in HBOOT mode. First entry of the menu is Fastboot. Select it with power button. You can flash another hboot from here.
To flash an hboot, you must have the fastboot binary for your computer.
You can find them here :
http://developer.htc.com/adp.html (search for fastboot, you will have download links for Windows, mac os x and linux)
First, check that your device is detected :
Code:
fastboot.exe devices (Windows)
Code:
./fastboot(-mac) devices (Mac OS X / Linux)
It should return something like this :
Code:
SH******* fastboot (numbers after SH are different for each device)
Next, download the hboot you want to flash, and run the fastboot binary via console, terminal, or whatever you want with the following :
Code:
fastboot.exe flash hboot name_of_hboot.img [B](Windows)[/B]
Code:
./fastboot(-mac) flash hboot name_of_hboot.img [B](Mac OS X / Linux)[/B]
Or, if you are on Windows, you can use AndroidFlasher (link), which does the same, but with a graphical interface.
to install a new HBOOT your device needs to be S-OFF, you can use fastboot commander to do so. for fastboot commander to work you will need adb drivers and java sdk. Then download a HBOOT from the alpharev.nl website.
NOTE: if you have a HBOOT from alpharev, and you run a RUU IT WILL NOT RESTORE THE HBOOT TO THE STOCK VERSION therefore, if you wish to fully unroot, you firstly need to flash the downgrader (also found on alpharev), and then run the RUU.
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
paulino633 said:
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
Click to expand...
Click to collapse
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
same issue help me please.
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
prasannaek said:
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
Click to expand...
Click to collapse
petidis said:
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
Click to expand...
Click to collapse
Hi guys
There is a guide on top of Q&A section... why not use it? Please hit the thanks button there... he deserves it
hello my desire is bricked
im still have fastboot
could any one help me to restore it with fastboot and sdk
bravo pvt1 ship s-on
hboot -0.93.0001
microp-051d
touch panel -synw0101
radio-4.06.00.02_2
aug 10 2010 17.52.18
i tried to flash recovery through fastboot
it gave me
12 signature verify fail
thanks
Hey I have kind of the same problem, I used to have the Golden memory then I change to Security OFF with AlphaRev, but then I mess up all cos my memory was failing and I have to format it, then I tryed to restore a backup and the phone just hung on boot. With the HTC logo,
I can access to the hboot and I got this.
Bravo PVT3 SHIP S-ON
HBOOT-0.93.0001
Microp-051d
Touch Panel SYNW0101
Radio-5.11.05.27
Aug 10 2010,17:52:18
Alse I have a video on youtube "Dead HTC Desire" under my username I cannot post the link
I probably need to re do the golden memory but anyone have a clue?
Wat is golden memory
Sent from my HTC Desire using XDA Premium App
I think he means GoldCard.
I tried the gold card using the tools but can't. Fix the proplem
Sent from my Blade using XDA App
Hi,
i tried to unroot my desire and now it's bricked.
The display only shows htc and 4 triangles and !.
Volume down + Powerbttn doesnt work.
I cant get access via fastboot or adb--->No device listed.
RUU Software-->Failure 117 not connected
If i connect to PC and disconnect it shows:
AlphaRev CM7 r2
Bravo PCT3 Ship S-OFF
HBoot-6.93.1002
Microp-051d
Touch Panel-synw0101
Radio-4.05.00.11
Aug 10 2010,17:52:18
RUU
Can someone help me???
go to bortak's troubleshooting guide stickied to Q&A, luckily this has been asked and answered many times
you have to flash downgrader before flashing RUU, use the 2.3.3 GB RUU.
saw304 said:
Hi,
i tried to unroot my desire and now it's bricked.
The display only shows htc and 4 triangles and !.
Volume down + Powerbttn doesnt work.
I cant get access via fastboot or adb--->No device listed.
RUU Software-->Failure 117 not connected
If i connect to PC and disconnect it shows:
AlphaRev CM7 r2
Bravo PCT3 Ship S-OFF
HBoot-6.93.1002
Microp-051d
Touch Panel-synw0101
Radio-4.05.00.11
Aug 10 2010,17:52:18
RUU
Can someone help me???
Click to expand...
Click to collapse
One does not simply install a ruu on the cm7r2 hboot.