I tried to flash a new splash using android flasher 1.6.1 and it didn't worked out.
I tried to do it using ADB and it's write to me :
sending 'splash1' (750KB)...
OKAY [0.118s]
writing 'splash1'...
FAILED (remote:not allowed)
finished.total time 0.119s
I am using Cyanogen7 ROM and I have S-OFF :
BRAVO PV4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
Can please someone help me ?
fastboot flash?
ghalalb said:
fastboot flash?
Click to expand...
Click to collapse
yes
Im trying to change the splash picture.
sorry, I should have explained myself, have you flashed from fastboot or adb only? I'm sure you have to do it from fastboot not adb, there is a tut on here somewhere, but i can't find the link for it
could try this method though i've not
http://forum.xda-developers.com/showthread.php?t=794638
AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods
found the method I used
http://forum.xda-developers.com/showthread.php?t=795132&highlight=fastboot+flash+splash1
AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods
That method worked for me too, nice
I tried to do it with fastboot ,still don't work for me.
it says it's all done but nothing happends.
I also tried to do the S-OFF again and it give me the next error:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
I dont understand what's wrong ?
I use android flasher. Its damn easy for noobs. I'm not a noob, but I'm lazy enough to use it.
I have also tried with Android Flasher but still doesn't work...
kleinyair said:
I tried to do it with fastboot ,still don't work for me.
it says it's all done but nothing happends.
I also tried to do the S-OFF again and it give me the next error:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
I dont understand what's wrong ?
Click to expand...
Click to collapse
I think, you should write this problem on irc.freenode.net, channel #alpharev
Don't know what's the problem, but think the guys from alpharev-team could help here...
Sent from my HTC Desire using XDA App
anderl78 said:
I think, you should write this problem on irc.freenode.net, channel #alpharev
Don't know what's the problem, but think the guys from alpharev-team could help here...
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
How do I use the IRC ?
I tried to write it in my exlorer,didn't go nowhere.
I'm sorry I'm quite new here.
And your fastboot/hboot does say something like aplpharev on the top? If that is the case it will also work if you do it right when booted into fastboot. I might be able to guide you through it.
If that is not the case, something is wrong, and you will need to run alpharev again.
I also dont get how your cid can be 11111111, as that definitely does not look right. Try booting to fastboot and run "fastboot oem boot" and write the cid it throws out it should be something like HTC_Y13
mortenmhp said:
And your fastboot/hboot does say something like aplpharev on the top? If that is the case it will also work if you do it right when booted into fastboot. I might be able to guide you through it.
If that is not the case, something is wrong, and you will need to run alpharev again.
I also dont get how your cid can be 11111111, as that definitely does not look right. Try booting to fastboot and run "fastboot oem boot" and write the cid it throws out it should be something like HTC_Y13
Click to expand...
Click to collapse
My hboot doesn't say nothing about alpharev i got it allready s-off from the store,thats what it write on my hboot:
BRAVO PV4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.11.05.14
I run fastboot oem boot and this is the reasult:
I will very appreciate if you could please help me.
Try the alpha rev s-off method (bootcd) then try again with the gui tool
isit-LoVe said:
Try the alpha rev s-off method (bootcd) then try again with the gui tool
Click to expand...
Click to collapse
I have allready tried with alpharev bootcd and it gave me:
waiting for your device... FOUND!
Identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT version: 0.93.0001
Screen type:
Your phone was not recognized or is unsupported at this time.
If you are 100% sure your phone type should be supported in this version,please note the Model ID displayed.
Powering off in 60 seconds.
what do you mean gui tool ?
seems like your phone uses an alternative s-off method or its just faking S-OFF (only displaying it on screen)
i googled for about 15 mins and found this: http://4pda.ru/forum/index.php?showtopic=180832&st=12640#entry6668455
use google language translator for other language
When you try to get the S-OFF:
identifying your phone:
Device model: PB992
CID: 11111111
MID: PB992
HBOOT VERSION: 0.93.0001
SCREEN TYPE:
Your phone was not recognized or is unsuported at this time.
Have:
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.14.05.17
Aug 10, 2010 17:52:18
Telephone gray, root mean.
Beat 3 months, finally found the solution:
when alpharev gives Your phone was not recognized or is unsuported at this time.
disable the phone from the wire
Hit Ctrl + C
see $
write vi alpharev.sh Hit Enter
cursor down to 117 lines, where it is written PB9920000 remove zeros that would get PB992
Hit Shift colon and write wq
see $
write. / alpharev.sh
process will start again on the instructions of obtaining s-off
ps. sewed with flash
Click to expand...
Click to collapse
gui tool i mean android flasher but after you successfully flashed with alpha rev :/
I tried the process,I changed the PB9920000 to PB992 but I dont understand what is that mean :"Hit Shift colon and write wq"
what is shift colon ?
Edit :O.K I figured it out !!!!
after I changed the num to PB992 I pushed Shift+Z
and I wrote :" ./ alpharev.sh "and Enter
It start all over from the begining and its all working good now.
Thank you very much...
His phone is s-off alright, but it has somehow been delivered that way, so you have got a phone, which were meant for development or a store demo device(have seen the same issue on store demo devices).
The problem is, that this is real s-off, which means it's set by a flag on a low level of the nand, so he still has the original bootloader, which doesn't support fastboot commands. And because it's a development device it's got cid 11111111, which is wrong and makes alpharev recognize it as a different/non existing device. You should be able to flash it in another way because as you are s-off, you can make the recovery ask the bootloader to flash low level stuff like splash, and the bootloader is s-off, so it shouldn't check for anything. You might need some specialist aka the ones from alpharev though if they are interested in helping you.
edit: As it is s-off it might very well be able to flash one of the pb99img.zip files containing the alpharev hboot found on the alpharev site because it will accept them as if they were from HTC, so just put them on the sd-card with the right name and reboot to the bootloader. This way you might be able to activate fastboot commands, and start flashing the same way we do. This requires that those images will work normally on your phone, so i would still ask the alpharev guys so you don't risk a brick.
i agree with mortenmhp asking alpharev is probably the best idea
shift colon is probably :
in the editor vi you use ":wq" to tell the programm to save stuff and exit the editor
How can I make contact with alpharev ?
I didn't understant how to use the IRC...
Related
Hi,
Im keep getting crashes and boot loops on a few new roms with D2EXT D2WE im using HBoot with
BRAVO PVT1 SHIP S-ON <--- used unrevoked so why is it still s-on ?
HBOOT-0.00.0000
MICROP-031d
TOCUH PANEL-SYNT0101
RADIO-5.09.00.08
Amoled Desire GSM
Click to expand...
Click to collapse
i want to upgrade to Alpharev v1.8 Bravo_CM7 ... is there a new way to do or do i real have to create a gold card and so on .... anyway how to get into FASTBOOT and what are the right commands i have to type in my console on PC (win7 or ubuntu)
help !! thx in advance
nvm ... soulution .iso
Hi people i have a s-off desire with alpharev cm7r2 HBOOT and was stucked on the htc quietly brilliant logo when was booting and i decided to install a stock RUU and i had a error 110 during the installation and now when i turn on my phone it have the htc logo with 4 exclamation triangles in the corners,i cant enter fastboot,bootloader acess the sd card...i cant do nothing i tried with all the RUU that i find and it always stuck on the system part when te RUU is installing,then i have the 110 error....
Only that i see after the RUU fails is this
White screen with this text:
Alpharev CM/ r2
Bravo PVT4 SHIP S-OFF
MICROP 051d
TOUCH PANEL-SYNW0101
RADIO-4,05,00,11
August 10 2010,17:52:18
Any chance to do something?
Please help me people!
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
OMG man i love you!!!!!!!!!!!! i spend 3 long days to figure what to do and it was so simple.....thanks a lot! Solved now!
I was also worried when I saw these triangles
(They are very scary )
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Floatshow said:
Hi,
I just got this problem yesterday, and I figured out how to fix it.
Installation of RUU fails just because you have AlphaRev CM7 r2 hboot installed, and stock rom can't fit in, as the system partition is too small.
All you have to do is to flash the alpharev stock hboot over cm7 one, and then run the RUU, it will work
HTC Logo with triangles at the corners, in fact, is disguised fastboot mode, so you can flash other hboot.
Click to expand...
Click to collapse
smileking said:
dear sir, how can I flash the HBOOT not ?? fastboot ??? pls give me some detail....
Click to expand...
Click to collapse
You can flash another HBOOT from fastboot mode. Your device must be S-OFF.
To boot in fastboot mode, turn off your phone, press vol down button, and then power button, you will be in HBOOT mode. First entry of the menu is Fastboot. Select it with power button. You can flash another hboot from here.
To flash an hboot, you must have the fastboot binary for your computer.
You can find them here :
http://developer.htc.com/adp.html (search for fastboot, you will have download links for Windows, mac os x and linux)
First, check that your device is detected :
Code:
fastboot.exe devices (Windows)
Code:
./fastboot(-mac) devices (Mac OS X / Linux)
It should return something like this :
Code:
SH******* fastboot (numbers after SH are different for each device)
Next, download the hboot you want to flash, and run the fastboot binary via console, terminal, or whatever you want with the following :
Code:
fastboot.exe flash hboot name_of_hboot.img [B](Windows)[/B]
Code:
./fastboot(-mac) flash hboot name_of_hboot.img [B](Mac OS X / Linux)[/B]
Or, if you are on Windows, you can use AndroidFlasher (link), which does the same, but with a graphical interface.
to install a new HBOOT your device needs to be S-OFF, you can use fastboot commander to do so. for fastboot commander to work you will need adb drivers and java sdk. Then download a HBOOT from the alpharev.nl website.
NOTE: if you have a HBOOT from alpharev, and you run a RUU IT WILL NOT RESTORE THE HBOOT TO THE STOCK VERSION therefore, if you wish to fully unroot, you firstly need to flash the downgrader (also found on alpharev), and then run the RUU.
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
paulino633 said:
Friends, my HTC is Stucked ive tried a lot of things and it doesnt answer, i cannot access Hboot anymore, if i try to put in fastboot mode it appear the 4 triangles with exclamation in corners, ive tried to put an RUU_HTC Desire Android 2.3 Upgrade (Gingerbread) but i got an error on radio update, and signature, ive tried a lot of RUU
Bravo PVT1 ship S-ON
HBOOT-1.02.0001
RADIO 5.11.05.27
Plzzzz help me
Click to expand...
Click to collapse
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
same issue help me please.
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
prasannaek said:
Dear sir,
I have the same issue( Htc black screen with 4 "!" marks. with the following screen
-Revoloutionary-
BRAVO PVT4 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.17.05.23
Aug 10 2010, 17:52:18
RUU
--------------------
Pls help me on this how retore original version
Click to expand...
Click to collapse
petidis said:
i have the same problem
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.09.05.30_2
AUG 10 2010,17:52:10
Click to expand...
Click to collapse
Hi guys
There is a guide on top of Q&A section... why not use it? Please hit the thanks button there... he deserves it
Heres the situation. Was happily running a rooted s-offed desire using Oxygen 2.3.2.
I needed to flash on a stock O2 rom as its got to go back to HTC tomorrow because of the reboot on charge issue.
Anyone I've run into a problem.
Downloaded and ran this:
RUU_Bravo_Froy2_UK_2.14.207.1_Radio_32.44.00.32U_5.09.05.30_2_release_144166_signed.exe
Then this happened:
Right crew downloaded the O2 Froyo RUU.
Go to install and get this screen:
(ruu.jpg)
I start to worry a bit. But none the less I Wait for it to do its thing...
then I get this:
(ruu2.jpg)
Im now stuck with a warning logo and a small traiangle in each corner of the screen.
When I unplug the desire I get a white screen with the following:
Code:
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
Mar 29 2010,21:34:33
RUU
Main Version is Older!
Update Fail!
I cant get into recovery anymore
adb doesnt see the phone.
The only access I have to it is via fastboot.exe.
Any ideas? As I gotta get it back to stock - its being picked up in the morning to go back for warenty repairs!
Cheers!
*Edit*
My CID is O2__001
installing RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed fails with:
ERROR[131]:CUSTOMER ID ERROR
Totally stuck here I think...
Yes sir. I had an RUU file that did the exact same thing to my phone (bricked it). The RUU was an incomplete file and would only show the triangles in the 4 corners or boot loader with ruu as the only option. I had to look for a froto ruu of 2.2 and run it. As I'm sending this to you from that very same phone which was rooted again with unrevoked since I was back to froyo, you can see there is hope. I'm trying to remember the link to the ruu. I'm at work right now or I would attach the direct link to the working ruu for you. I'm looking into it for ya as we speak though.
Sent from my PC36100 using XDA App
Thank you kind sir, you could just possibly save my life!
Please pardon by botched spelling for I'm not the greatest of scholars. Unfortunately at this time, I'm not about to look for the correct RUU file. But I do kbow this much. Your lokking for an RUU that will downgrade the software to the oldest software that was released to the device. Now, I too must advise you, you will not turn S-on and if you rooted with revolutionary, the water-mark will still be there on your home screen. Those are other "issues" you will also have to "work the kinks out of" before warranty will replace it. Let me know if that doesn't help.
Sent from my PC36100 using XDA App
Tried a few RUU's but keep getting a "Customer ID error" on anyversion the same or > what im trying to install.
I've tried this guide:
http://forum.xda-developers.com/showthread.php?t=1275632
S-ON
"I'm S-ON, I can't boot recovery, and my phone doesn't boot "
This is a bit of a worse situation, as you cannot flash system critical parts such as the recovery image and just restore a backup. This unfortunately means that you will lose all of your data when you attempt to fix the phone.
[STEP1]- Make sure that you have a goldcard. If not, create one from the tutorial.
[STEP2]- Battery pull. Hold the BACK button and the POWER button to boot into FASTBOOT mode.
[STEP3]- Download the latest WWE RUU from here
[STEP4]- Run the RUU and wait for completion WARNING: DO NOT, BY ANY CIRCUMSTANCES INTERRUPT THE PROCESS - THIS WILL MORE THAN LIKELY END UP WITH A BRICKED PHONE - NOT EVEN IF GOD HIMSELF TELLS YOU TO DO SO, OR IF THE US PRESIDENT THREATENS YOU WITH THERMO-NUCLEAR WAR
[STEP5]- Once the phone is booted, you are now returned completely to stock. You will need to re-root again, and I'd recommend S-OFF
Click to expand...
Click to collapse
How the hell can I create a goldcard (need to read sd serial) when I cant use adb to connect to the phone (although fastboot.exe does).
fastboot getvar all if its any help:
C:\Program Files (x86)\android-sdk-windows\platform-tools>fastboot getvar all
INFOversion: 0.5
INFOversion-bootloader: 0.80.0000
INFOversion-baseband: 4.06.00.02_2
INFOversion-cpld: None
INFOversion-microp: 031d
INFOversion-main: 2.29.405.5
INFOserialno: HT05ZPL09473
INFOimei: 357841036658280
INFOproduct: bravo
INFOplatform: HBOOT-8x50
INFOmodelid: PB9920000
INFOcidnum: O2___001
INFObattery-status: good
INFObattery-voltage: 4123mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: RUU
INFOcommitno-bootloader: dirty-6175d920
INFOhbootpreupdate: 11
all: Done!
Click to expand...
Click to collapse
Well thats me properly ****ed.
Can find any way of reading the CID of a card. The app someone linked to doesnt work on a laptop with inbuilt on pci card reader - no in a PC with a hub.
I wonder how much these HTC bastards will want to charge me to have the motherboard replaced (rebooting under charging) and reflashing the device.
You would've thought someone would have come up with a better solution for finding a SD cards CID.
What exactly do you mean by this:
brockers said:
Right crew downloaded the O2 Froyo RUU
Click to expand...
Click to collapse
AND ALWAYS REMEMBER: AS LONG AS YOU CAN TURN ON YOUR PHONE, IT'S NOT BRICKED!!!!!!
nobody around you who can create goldcard for you? any android phone?
kotag82 said:
nobody around you who can create goldcard for you? any android phone?
Click to expand...
Click to collapse
Sadly not. I work with nothing but iPhone users.
The courier has picked it up now to send back to HTC for the rebooting issue. Lets see how much they try and rape me for this...
Had a result!
Checked the HTC repair tracking site to see my phones on its way back to me today! I thought I'd give them a call to get more details.
I was told the mainboard was indeed faulty so was replaced, phone now fully functional - and all under warrenty!
Can't wait to get it back to root it again...
I have just bought this phone, and i've rooted anothers, but i tried every guide, every tool (all of them no longer working), and not even HTCDev could help me.
On HTCDev's 1st step tells me to upgrade the RUU, and i tried with all versions, none worked out.
Some details of my Desire:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
I can't find a guide to get my S-OFF, all of them fail. I tried too with VISIONary+ r14 and keep frozen on black screen when i attemp to temproot.
Followed this guide to get temporary root. Writing on cmd "adb shell" at last step I got "$" and cant do the downgrade. I have made my Goldcard too, but nothing works...
Please, tell me what should i do, i just want RADIO S-OFF and then i will be capable of root or whatever i like =). Thanks to all anyways.
S-Off takes a great deal of skill now that AAHK is retired. You can still unlock the bootloader though.
klaien said:
I have just bought this phone, and i've rooted anothers, but i tried every guide, every tool (all of them no longer working), and not even HTCDev could help me.
On HTCDev's 1st step tells me to upgrade the RUU, and i tried with all versions, none worked out.
Some details of my Desire:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
I can't find a guide to get my S-OFF, all of them fail. I tried too with VISIONary+ r14 and keep frozen on black screen when i attemp to temproot.
Followed this guide to get temporary root. Writing on cmd "adb shell" at last step I got "$" and cant do the downgrade. I have made my Goldcard too, but nothing works...
Please, tell me what should i do, i just want RADIO S-OFF and then i will be capable of root or whatever i like =). Thanks to all anyways.
Click to expand...
Click to collapse
have you tried this as well?
http://forum.xda-developers.com/showthread.php?t=2168500
Mortal Eternity said:
have you tried this as well?
http://forum.xda-developers.com/showthread.php?t=2168500
Click to expand...
Click to collapse
Yes i tried it too, just the same. Bootloader dont give me the Unlock Token.
My Build v. is 3.13.161.5
Sense 3.0
Android 2.3.5
***********************************************
EASY UNLOCK BOOTLOADER TOOL
glevitan 2013
************************************************
This tool will help you to unlock / relock your bootloader
To succeed make sure:
1. HTC drivers are correctly installed
2. USB debugging is enabled
adb, fastboot, md5sum, wget other utilities will be installed
Checking adb connectivity....
-------------------------------------------
1. Unlock Bootloader
2. Relock Bootloader
3. Quit
-------------------------------------------
[What do you want to do]1
Detecting phone model
If your Device is an HTC Desire HD / Inspire 4G select yes to continue, if NOT j
ust quit. FLASHING THE WRONG PARTITION WILL BRICK YOUR DEVICE!!!
1. Yes
2. No
[Continue?]1
Getting Build version
your build version is 3.13.161.5
"""Your will reboot in fastboot again to continue the process
* server not running *
Obtaining Unlock Token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ -0.000s]
finished. total time: -0.000s"""
klaien said:
Yes i tried it too, just the same. Bootloader dont give me the Unlock Token.
My Build v. is 3.13.161.5
Sense 3.0
Android 2.3.5
***********************************************
EASY UNLOCK BOOTLOADER TOOL
glevitan 2013
************************************************
This tool will help you to unlock / relock your bootloader
To succeed make sure:
1. HTC drivers are correctly installed
2. USB debugging is enabled
adb, fastboot, md5sum, wget other utilities will be installed
Checking adb connectivity....
-------------------------------------------
1. Unlock Bootloader
2. Relock Bootloader
3. Quit
-------------------------------------------
[What do you want to do]1
Detecting phone model
If your Device is an HTC Desire HD / Inspire 4G select yes to continue, if NOT j
ust quit. FLASHING THE WRONG PARTITION WILL BRICK YOUR DEVICE!!!
1. Yes
2. No
[Continue?]1
Getting Build version
your build version is 3.13.161.5
"""Your will reboot in fastboot again to continue the process
* server not running *
Obtaining Unlock Token
< waiting for device >
... INFO[ERR] Command error !!!
OKAY [ -0.000s]
finished. total time: -0.000s"""
Click to expand...
Click to collapse
What hboot version are you running? Check in fastboot usb
glevitan said:
What hboot version are you running? Check in fastboot usb
Click to expand...
Click to collapse
HBoot 2.00.0027
klaien said:
HBoot 2.00.0027
Click to expand...
Click to collapse
You need to update your hboot first to 2.00.0029
Sent from my Desire HD
yumm91 said:
You need to update your hboot first to 2.00.0029
Sent from my Desire HD
Click to expand...
Click to collapse
Done, I have unlocked bootloader succesfully =), thanks.
Now I need to downgrade from my 3.13.161.5 right? Any ideas?
klaien said:
Done, I have unlocked bootloader succesfully =), thanks.
Now I need to downgrade from my 3.0 right? Any ideas?
Click to expand...
Click to collapse
The answer is already above you from Mortal Eternity.
http://forum.xda-developers.com/showthread.php?t=2168500
As you can see in that post, you have already done no 1. Just proceed according to the steps mentioned to gain root.
Sent from my Desire HD
Root, Radio S-OFF, SuperCID, SIMUnlock for DHD
At last i got root, S-OFF SIM-Unlock and SuperCID
Just for DHD devices with Android 2.3.5, Sense 3.0, and Build version 3.x!!
Step by step:
0.- (ON YOUR PHONE) "Settings option -> Applications -> Development -> Check the box for USB Debugging to turn it on
1.- Upgrade HBOOT to 2.00.0029
- Download the HBOOTupdate 2.00.0029 (rom.zip) and put it on your C:/ drive.- Download the HBOOTUpdate kit, extract it, and run "hboot update by behtash.bat". Wait until hboot flash complete.
2.- Unlock your BootLoader
- Simple as following HTCDEV steps
3.- Flash CWM Recovery
- Download the Recovery Kit, extract it.- Download the SU flashable.- Put the SU flashable on your SDCard- "Only Charge" mode again and run "flash recovery.bat". Wait for it flash the recovery.- Reboot your phone to Bootloader Screen, go to the recovery and flash now the SU.--------------------------------------------------------------------------------------------------------------------------------------------------------
Once here you gained root access, the next steps are to get S-OFF, SuperCID, and SIMUnlock.
--------------------------------------------------------------------------------------------------------------------------------------------------------
4.- Flash a new Boot.img
- Download the UpdateBoot Kit, extract it- Run the "flash boot.bat".
5.- Get S-OFF, SuperCID, and SIM Unlock
- Follow the high-level DHD/Inspire manual S-OFF hack concept for advanced users.
All this stuff is a compilation of multiples guides, thanks to all for the support. Good luck with your DHD.
Or you could just head to this thread : http://forum.xda-developers.com/showthread.php?t=2184953 and do all of the above.
hacktrix2006 said:
Or you could just head to this thread : http://forum.xda-developers.com/showthread.php?t=2184953 and do all of the above.
Click to expand...
Click to collapse
Sure =), but that tuto was to compile all the guides in one. Thx for the link anyway.
I tired the steps above, but it still keeps going back to 2.00.0027, it refuses to update to 2.00.0029 help?
cre8ive65 said:
I tired the steps above, but it still keeps going back to 2.00.0027, it refuses to update to 2.00.0029 help?
Click to expand...
Click to collapse
Post some details about your phone please.
example:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
successfull flashed...and now on ease....
klaien said:
Post some details about your phone please.
example:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.52.27
eMMC-boot
Sep 7 2011,19:06:24
Click to expand...
Click to collapse
If you're nearby, call out. I can lend a hand.
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
My issue is that i can't get the identifier token, because I can't update to 2.00.009, because I can't make a gold card.
cre8ive65 said:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.14.04.28_M
eMMC-boot
My issue is that i can't get the identifier token, because I can't update to 2.00.009, because I can't make a gold card.
Click to expand...
Click to collapse
Why not?
glevitan said:
Why not?
Click to expand...
Click to collapse
I'm about to pull my hair out, this is so effing stupid. I keep getting stuck at step 1! I have a goldcard and it still wont update to 2.00.0029! I run the update tool, then when I go to fastboot it still says "2.00.0027" at the top. What am I doing wrong?
Read carefully : the unlockable bootloader update would seam to be region specific to make and model of phone, there are about 4 or 5 different versions on the htcdev website, please check the correct model and region of phone first...
Here's an idea try the PD98IMG.ZIP in this post, http://forum.xda-developers.com/showthread.php?p=40498764 it is the hboot 2.0.29 update you use via direct bootloader flashing.
Read the whole thread, it should help.... http://forum.xda-developers.com/showthread.php?t=2239497
You could also read this thread too.
http://forum.xda-developers.com/showthread.php?t=2221039
They are all good.
Sent from my HTC Desire HD using xda app-developers app
Hi everyone!
I've managed to screw up my Desire HD after running aahk-11092012, and was wondering if anyone had any bright ideas...
The Phone is a Desire HD bought from SFR here in France in 2011, never rooted or custom rom'ed, although updated with 2or 3 SFR roms since.
I ran aahk from the terminal on a OSX 10.7 (see Output.txt). From this you will see that it wants naturally to downgrade (to Froyo I assume) but downloading the rom fails, and even though I refused the "-n Flash this RUU? (y/n)" question, it continued doing all sorts of things, getting a few error along the way, rebooting the phone into recovery a few times, and finishes with
************* Downgrade failed *************
** Either:
** GoldCtixiard/SDCard failed
** USB connections are not working 100%
************* Downgrade failed *************
I then tried to flash the "Gingerbread HTC WWE 2.50.405.2" rom from the options menu, thinking I'd be clever, but that monumentally fails too..
From this point on the phone boots to the "Red tringle with an exclamation mark" screen (after the white HTC logo) and does nothing else.
Restarting AAHK just fails with a "Error detecting HTC phone on USB connection."
Having discovered the "VOL-UP +Power" recovery screen during this process, the next thing I tried was a "Apply sdcard:update.zip", but this just results in an "Invalid command" message underneath that already present "E: Can't open /cache/recovery/command" in yellow further down the screen.
I then try a "Wipe data/factory reset" and also a "Wipe cache partition". I can't honestly explain this. At least not given that I hadn't really looked up the issue anywhere yet. I also cant remember exactly what the output was, but the result is the same, still the red triangle screen.
OK, so now I finally open my eyes and realize what a moron I've been, so i plunge into actually learning something and realize quickly (aside from I hate myself and I'm not special, bla bla) that there are loads of thing I could have done differently, and directly on the phone, but obviously it's now too late. (See below for the information I CAN get from the Phone)
Oh yes, I did try a "Factory reset" from HBOOT, but still no joy....
The main option I've been looking into has been to recover an original branded SFR firmware and Froyo ROM and go from there, so I did manage to get a PD98IMG.zip file onto the SD card and HBOOT recognizes it, but fails with a "CID Incorrect" error.
I seem, therefore to be stuck whether I want to return to original SFR or continue tryng to flash a custom ROM:
I can't make a goldcard: I cant adb any commands, in HBOOT the device is not found, and in recovery the device is found but is "offline".
I found jo0ls' CID reader, but I dont have a SD card reader directly plugged to the PCI bus!
I did finally try to install a clockwork recovery in FASTBOOT, but get this:
$ fastboot flash recovery recovery-clockwork-5.0.2.0-ace.img
sending 'recovery' (3624 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
I assume this is much the same error as for the PD98IMG...
Sorry about the long winded post, but I hope it has the maximum of info...
Anyone have any ideas?
- I can boot to HBOOT: it shows me this:
ACE PVT SHIP S-ON RL
HBOOT-2.00.0027
MICROP-0438
RADIO-26.03.02.26_M
eMMC-boot
Sep 7 2011, 19:06:24
- ...and FASTBOOT, fastboot getvar all gives this:
INFOversion: 0.5
INFOversion-bootloader: 2.00.0027
INFOversion-baseband: 26.03.02.26_M
INFOversion-cpld: None
INFOversion-microp: 0438
INFOversion-main: 1.32.405.6
INFOserialno: SH12GRX00567
INFOimei: 356812048021701
INFOproduct: ace
INFOplatform: HBOOT-7230
INFOmodelid: PD9810000
INFOcidnum: VODAP203
INFObattery-status: good
INFObattery-voltage: 4199mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: 743ca94a
INFOhbootpreupdate: 11
INFOgencheckpt: 0
INFOregion-id: 0
all: Done!
- The recovery is the original "Android system recovery <3e>"
AAHK, and the server hosting the downgrade files, is retired. You can still unlock the bootloader, but your hboot needs updating before it cam be unlocked. I think you could also run your stock RUU.
CID Number shows that your device is a Vodafone device, probably VodaSFR but who knows? Fetch a Voda RUU and install it
Sent from my Desire HD using Tapatalk 2
you need to upgrade your bootloader to 2.00.0029
htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe (sorry, i can´t atach links)
then unlock it(follow htc-dev guide) and you will be able of flashing a custom recovery
pascuals said:
you need to upgrade your bootloader to 2.00.0029
htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe (sorry, i can´t atach links)
then unlock it(follow htc-dev guide) and you will be able of flashing a custom recovery
Click to expand...
Click to collapse
Thanks for all your answers!
@ bananagranola: I did know aahk had been discontinued, I actually mentioned this originally but edited it out to "shorten my post"!
@ humzaahmed155: quite right, I'm with SFR, and I'm trying to simply restore an original branded ROM
@ pascuals: I will look into your suggestion right away! I was vaguely aware I might have to do this but could not get an accurate enough idea of what version might be appropriate for my phone
[SOLVED] [Q] Desire HD can't boot (red triangle) after AAHK Fail
Kawika1611 said:
Thanks for all your answers!
@ bananagranola: I did know aahk had been discontinued, I actually mentioned this originally but edited it out to "shorten my post"!
@ humzaahmed155: quite right, I'm with SFR, and I'm trying to simply restore an original branded ROM
@ pascuals: I will look into your suggestion right away! I was vaguely aware I might have to do this but could not get an accurate enough idea of what version might be appropriate for my phone
Click to expand...
Click to collapse
Woohoo!! I'm so happy, I got the phone working again last night!! I had a ruu kicking around:
RUU_Ace_Sense30_S_Vodafone_FR_3.13.163.3_Radio_12.65.60.29_26.14.04.28_M_release_227340_signed.exe
from the first day I'd bricked it. This hadn't worked the first time I tried it on windows (actually a Parallels VM on Mac), with the phone plugged in, but I can't remember what mode the phone was in; but as you'll see below I must not have been in fastboot...
Whatever, last night I finally tried pascuals's PD9810000 RUU, with the phone connected and in fastboot, the utility detects the phone fine, but fails with a firmware version error, saying the phone is 1.32.405.6, it will install version 3.13.0.0 but I need to "upgrade to 3.12.405.1"..:silly: (see attachments).
Feeling dejected I fired up the rom cited above thinking I have nothing to lose, and...lo an behold...10 minutes or so later the phone reboots to a beautiful welcome screen insulting me for not having inserted a SIM card!!!
Thanks anyway for your answers, at least they got me looking in the right direction!! I will now go a learn properly how this things work before bricking it again
pascuals said:
you need to upgrade your bootloader to 2.00.0029
htcdev.com/ruu/PD9810000_Ace_Sense30_S_hboot_2.00.0029.exe (sorry, i can´t atach links)
then unlock it(follow htc-dev guide) and you will be able of flashing a custom recovery
Click to expand...
Click to collapse
My HBOOT is 0.85.2425, after S-OFF. Can I update to 2.00.0029? How?
Thanks.
use that link and just run the exe with your phone connected, atleast with debugging on i think, mine was like that, the tool took care of the rest automatically.
mobidor said:
My HBOOT is 0.85.2425, after S-OFF. Can I update to 2.00.0029? How?
Thanks.
Click to expand...
Click to collapse
I see no reason why you need to update the bootloader when you already have s-off. If your bootloader is engineering bootloader then just let it be.
Sent from my Desire HD