Develop Bugs

need help for cricket internet!!!! asap

as i stated in an earlier post i have what once was a telus issued htc touch p3050 which i have been informed is the same as a 6900. i took my phone to a local phone flasher and was given back a partially flashed phone. to make outgoing and recieve incoming phone calls the phone works great!! however when i try to connect to the internet... i follow all the setup rules of the wap.cricket.com, [email protected], and port 8080 etc...
when i try to connect it tells me i have a bad username or password.
the phone attempts to dial the #777 too.
ok now here are some mitigating factors i should tell u about...
-when i soft reset the phone i get an alltel slash screen even tho the phone operates on the cricket network.
-when i go into the settings to futz with the internet settings i also get choices for an alltel phone.
-and as told earlier by a few folks i checked in my pst settings and my phone is in fact already on the simple ip settings...
please help!!!!
i really want and need internet!!!
i would be willing to try and reflash the phone with another rom but i can't get the qpst to recognize my phone... cuz it only allows me to open one additional port in addition to the two that already exist...i keep getting a port busy error...
thanks in advance!!!

tbananaz said:
as i stated in an earlier post i have what once was a telus issued htc touch p3050 which i have been informed is the same as a 6900. i took my phone to a local phone flasher and was given back a partially flashed phone. to make outgoing and recieve incoming phone calls the phone works great!! however when i try to connect to the internet... i follow all the setup rules of the wap.cricket.com, [email protected], and port 8080 etc...
when i try to connect it tells me i have a bad username or password.
the phone attempts to dial the #777 too.
ok now here are some mitigating factors i should tell u about...
-when i soft reset the phone i get an alltel slash screen even tho the phone operates on the cricket network.
-when i go into the settings to futz with the internet settings i also get choices for an alltel phone.
-and as told earlier by a few folks i checked in my pst settings and my phone is in fact already on the simple ip settings...
please help!!!!
i really want and need internet!!!
i would be willing to try and reflash the phone with another rom but i can't get the qpst to recognize my phone... cuz it only allows me to open one additional port in addition to the two that already exist...i keep getting a port busy error...
thanks in advance!!!
Click to expand...
Click to collapse
you realy need to just flash it yourself with a new rom... check your radio (3.35 & up) and then switch to one of vetvito's roms. after you flash it remember to set the phone todiag mode (##3424) so qpst will see it. you might need to change the port via the device manager. make sure you have the drivers you need (ppc6700 drives work fine)... Do ur *228 stuff after you change the spc to all 0's. if ever in doubt ##778 to check your epst settings. for internet, setup ur modem & proxy in the connection manager. be sure to use your real number and "cricket" as the pw. This is not a full walkthough, but the just main points you need to touch on.
good luck

make sure all ur epst settings are correct...check and see if u have the newest prl uploaded 1050 i believe is the new evdo one...also go to select networks in the connections/connections/advanced and make them all to the one u want to connect through

do u know where i can get the new prl. i installed the 1040 and its only 1X

Cricket on HTC Apache PPC6700
I have the PRL loaded. Internet is a b*tch! Every time I do a soft reset, the sprint connections come back. Then I have to delete the Sprint one, and goto the wap.... whatever whatever site to get it on the internet. And its only 1X. Here is a link to PRL's. http://corolada.com/prl/
If ANYONE out there is willing to make me a Cricket rom for my 6700 Apache, you will be my best friend. It would be nice to not have to load a random PRL every time i hard reset my phone and mess with connections forever just to get slow as heck 1X speeds. If you can, just make a rapidshare link to the exe. Helmi's WM6 rom is bad and doesn't work right. And I don't know how to use BuildOS and my friend has used it several times on his VZW apache. But it won't work right for some reason. All I am asking for is a rom or cab or something to get internet to work. i don't even care that much about mms. even tough it would be nice

@tbananaz: Go to Howardforums.com under the cricket forum and looks for To0's V2 ROM for the 6900. You might have to PM him for it. Out of the box its has everything for cricket aside from changing a few things under EPST. The easiest way to get your phone working with everything with Cricket.
@disturb3d1: Your best bet for the 6700 would be to build a ROM for yourself for Cricket. Download PPCkitchen and make one. Its pretty straightforward and has everything including Crickets OEM info. So you don't have to mess with any other carriers settings.
If you any of you need help let me know. 8)
Later Days,

Someone, anyone please HELP with an ESN

I know I'm a noob, but I've been struggleing with this for a while now. I put in probibly 6 hours last night and haven't any clue if I'm even close to being complete.
I bought an HTC Touch MP6900SP (Sprint) and was told it had a clean ESN. Turns out it didn't and I'm up the creek because I paid cash. I bought it to replace my motor razr which has a clean ESN, but is quickly dieing. I'm trying to clone my ESN but can't get mtty to work properly. Once the ESN is swapped, the RAZR will go in my junk drawr.
I've tried to follow the steps here:
http://www.mobile-files.com/forum/showpost.php?p=355768&postcount=1
but when I go to fire up mtty I can only enter the rtask a command then the program or phone won't allow me to do anything else, even type the next command.
In the boot loader I have the following info:
VOGU100 MFG
SPL-2.31.CoKe
CPLD-3
Can someone please walk a noob through this. I'm totally new to this whole unlocking thing and could really use some help. The phone is locked to the account of the previous seller who refuses to release it. I've got the 2.31.coke on there now and when I boot it normally I also have the Alltel rom that fires up. HELP!!! PLEASE!
Edit: In MTTY when I run rtask a this is what I see, but I can't type anything after that.
rtask a
Enter Radio Bootloader
POWER ON PMIC VREG_USB : SUCCESS!

This has been covered...
SEARCH!!! MTTY is actually working, you just can't see the text you are typing... Just be careful typing everything in and you will be good to go...

Alright, I got through MTTY, and am not onto working in CDMA workshop.
I put the phone into DM mode, Active sync disconnects, but CDMA shows it is connected to Com1 port successfully, but fails when I attempt to read the ESN.
I can't seem to find the diagnostic modem drivers that I need and think the lack of the drivers is what is causing me grief now.
Believe me, I'm looking everywhere I can to get information. I've got tons of hours into this now.
Edit: Got the drivers installed and working properly. Still having problems reading from the phone with CDMA.
Edit 2: Had to figure out the proper com port in CDMA, getting warmer.

scanning and finding esn addresses right now! If this thing works I'll be so damn happy!

im still reading up on this, but seeing information that has been corrected over time, then finding some old posts that may be outdated.
using MTTY with all of the steps to superCID... is that actually changing the ESN in one failed, fast swoop? Is it actually doing what CDMA does when scanning/writing?

ESN
cox abele said:
im still reading up on this, but seeing information that has been corrected over time, then finding some old posts that may be outdated.
using MTTY with all of the steps to superCID... is that actually changing the ESN in one failed, fast swoop? Is it actually doing what CDMA does when scanning/writing?
Click to expand...
Click to collapse
Hey did you get this to work? I changed my esn last night and the phone works. Can make and receive calls. Only prob is that I can't connect to the internet. I think it is a problem with the user name/password but not sure. I keep getting the 67 error when trying to connect. I only changed the esn and nothing else.
Did you have any luck? If so what about the internet thing? Any help would be much appreciated. Been reading and trying to figure this out for a while now.
Thanks,
-T

Hey man, welcome to XDA
What Airline do you fly for? It's good too see another fellow Pilot on here.
As you can see from my sigpic, I'm with Air Canada Jazz.

b727pilot said:
Hey did you get this to work? I changed my esn last night and the phone works. Can make and receive calls. Only prob is that I can't connect to the internet. I think it is a problem with the user name/password but not sure. I keep getting the 67 error when trying to connect. I only changed the esn and nothing else.
Did you have any luck? If so what about the internet thing? Any help would be much appreciated. Been reading and trying to figure this out for a while now.
Thanks,
-T
Click to expand...
Click to collapse
Have you tried installing the DCD carrier cab. I think this is the link. Just double check.
http://dcd1182.n715dp.com/index.php?dir=carriers/

Help with ESN Change. Phone works just not internet
Csquared said:
Have you tried installing the DCD carrier cab. I think this is the link. Just double check.
http://dcd1182.n715dp.com/index.php?dir=carriers/
Click to expand...
Click to collapse
Thanks for the reply. No I had not tried the DCD carrier cab. First of all let me get this out of the way. NOOB here.
I tried researching the DCD cab because someone else suggested it and then tried it and it didn't work. I think it might be something with the user name and password for vision service. This is what I did:
Flashed the Touch (it is a sprint touch) to the 6.1 wm latest rom (sprint). Then did the esn swap from my razr (also sprint). After the esn swap I flashed again using the 6.1 sprint rom (just wanted to make sure nothing changed after I did a rom flash). Phone works fine on sprint and I even called them on it and they think it is a razr. I can make and receive calls, voicemail etc. Just can't get the internet working. Just get the 67 error. Any ideas?
-T

jmitr said:
Hey man, welcome to XDA
What Airline do you fly for? It's good too see another fellow Pilot on here.
As you can see from my sigpic, I'm with Air Canada Jazz.
Click to expand...
Click to collapse
SWA! Ever in MDW?
-T

b727pilot said:
Thanks for the reply. No I had not tried the DCD carrier cab. First of all let me get this out of the way. NOOB here.
I tried researching the DCD cab because someone else suggested it and then tried it and it didn't work. I think it might be something with the user name and password for vision service. This is what I did:
Flashed the Touch (it is a sprint touch) to the 6.1 wm latest rom (sprint). Then did the esn swap from my razr (also sprint). After the esn swap I flashed again using the 6.1 sprint rom (just wanted to make sure nothing changed after I did a rom flash). Phone works fine on sprint and I even called them on it and they think it is a razr. I can make and receive calls, voicemail etc. Just can't get the internet working. Just get the 67 error. Any ideas?
-T
Click to expand...
Click to collapse
Do you have a data plan setup with Sprint on your Razr?

Csquared said:
Do you have a data plan setup with Sprint on your Razr?
Click to expand...
Click to collapse
Yea I have the old sero plan. It includes unlimited data. I think that is what you mean. I can run opera on it so it is working.
-T

This might be trivial but lets check.
Goto:
Settings/Connections/Connections/Advanced/Select Networks
It should show Sprint in top and Work network in bottom.
Click edit under Sprint and make sure its set to #777

Then try this:
Settings/Personal/Phone/Services/Internet/Get settings
Then have IOTA done by pressing start.

No Internet Still......
Csquared said:
Then try this:
Settings/Personal/Phone/Services/Internet/Get settings
Then have IOTA done by pressing start.
Click to expand...
Click to collapse
Thanks Csquared. I tried this and this is what I got. I also have posted this at http://forum.xda-developers.com/showthread.php?p=3413006#post3413006 . Not trying to double post but was getting some help over there also.
Phone is working great using the donor ESN but no internet. Here is what I've got:
- Sprint Razr (donor ESN phone) and Sprint Touch (Had bad ESN now has Razr ESN).
- Have Data plan on my Account.
- Did the changes from the original post and phone works fine (can make and receive calls)
- When I try and connect to the internet it gives me error 67, can not connect #777 and 1012 error.
What I have tried:
- Start/settings/services/internet/get settings/ and start IOTA.
- Tried making a new connection under start/settings/connections/connections and setup a new #777 connection.
- Changed Active Profile from 0 to 1 in ##3282#
None of this worked. Under ##3282# my settings are:
User Name:
Active Profile - 1
MIP_MODE - Mobile IP Only
User Name - (My Username)@sprintpcs.com
SPI MN-HA - 4D2
SPI MN-AAA - 4D2
ReverseTunnel Pref - Enable
Home Agent IP Address - 0.0.0.0 (for some reason it will not let me edit this setting)
Primary Home Agent - 0.0.0.0
Second Home Agent - 0.0.0.0
HA Shared Secret (HEX) – Blank
AAA Shared Secret (HEX) – Bunch of characters
Advanced:
ESN - Donor ESN (From Razr)
MSID - My Phone number
Not sure if any of this makes sense. I am just trying to get the internet working. Please let me know if anyone has any ideas. It does say "Preparing vision services" when I try to connect to the internet but always fails with error 67 Username and/or Password incorrect. Also get Cannot Connect Dialed #777. Also get error code 1012 could not prepare Vision services please try again later.
Thanks very much in advance for the help!
-Tony

Well I know this is prolly not the right thread to put this under however I am not sure which is and the person who started this thread is doing what I wanted to know was possible to do. And second I was wondering how to do it. I am completely noob on this. I did as he did and bought a new phone which ended up having a bad ESN.
I have a Nokia with Verizon and it broke. They wont replace it for me so I went and bought an LGVX9100M. I have been researching for around 4 hours now and cant find a thing if I can take the ESN from my Nokia which is clean and working and put it to the LG to make it work. I am not familiar with any thing that has to do with programming cell phones or using the programs. I am however a pretty quick learner.
Is there a way to do this? Is there a program I need or a way to just do it in the phone? IF I can do this with a program how do I do it and what stuff do I have to replace the numbers with?

Bad ESN's= Unrecovered lost or stolen property, or property with a bill due over its usage.
Helping with Bad ESN's, is like helping repaint a stolen car.
WR

HTC Droid Incredible Cricket

Ok so my droid is flashed to cricket and I'm sure many of you have heard of the new IP change. Well i replaced the autostart.sh file with the one that contains the new IP, and my browser works fine but now my apps dont work (as in they don't get internet access) =/... anyone have any ideas?
P.S: I was looking through ##debug on the phone and on the evdo programming tab it has the old ip address and maybe thats the issue ... how would i change that?
Thank You

Flashing Samsung Fascinate To Cricket Walk Through

Flashing Samsung Fascinate To Cricket!!!!
ok so this is the one phone that has made me wanna punch my screen since i got it. amazing phone but hell an a half an very difficult to flash. OK so to start there are programs out there u can purchase to flash this phone if u wanna pay 100 dollars or 65 at a shop. but well im cheap so i set hours on end figuring what i could out. this tutorial will get u talk, text, 3g, internet an ability to send mms (to recieve has been difficult because there is a lock code to get to those features that ive been unable to find out)...
WHAT YOU WILL NEED!!!
QPST. 2.7 build 323 an build 215.
a Samsung fascinate.
PATIENCE!!
samsung fascinate drivers
and samsung epic drivers
first you will want to turn on usb debug mode, stay awake while plugged in, mock location(applications /developer menu). o an dial up mode(in wireless settings). install all the drivers before plugging phone in. after that plug in the phone. now as always you will want this phone on COM PORT 1. . (if u dont know how to do this u have to get to control panel then systems then hardware tab then select device manager. from there go to ports right click the samsung. then port settings tab then advanced. there will be a number toward the middle bottom set it as com port 1 then ok ok ok ok untill ur back to device manager then exit device manager) open qpst system programming. phone should show if not go to qpst config an set it up.
now in qpst system programming u will select the phone an it will ask for the spc. it is six 0's (ZERO's). then select read phone . now go to the roam tab. then u will see a prefered roaming box click the browse button an select the prl you wish to use. (nationwide 3g prl is best i use 42800 which is for the zio) now write to phone it will restart.. from here after the phone restarts open up qpst again an go thru the first process except do not go to the roam option. click the cdma tab an select nam1 if not already selected(ONLY nam1 NOT nam2 if u r dumb enough to mess with nam2 i am not responsible for the outcome )in nam 1 select set to default. now go to m.ip an delete all entrys. click write to phone it will again restart..
ps after you load the prl to the phone do a factory reset to clear out a few of the system logs to help everything go thru smooth
FUN TIME!!!! after phone reboots click the dialer menu (if its asking to program push the power button as if u r turning it off then select airplane mode. then restart the phone while in airplane mode(trick to get around that pesky activation menu).now after that boot select the dialer an enter *#83786633 an press home. got back to dialer an delete whatever is in it. if nothing ok now enter *#22745927 it will then ask for the spc code it is six 0's (ZERO's). now select to enable hidden menu. from there accept an what not if it ask an get to the home screen after hidden menu is enabled.
now again enter dialer make sure its clear an press **772 it will again ask for spc it is all six 0's (ZERO's) 000000. now from there it will show a service programming menu. press down slowly till u reach nam1 CDMA directory number. this will be your number click touch here u enter your number (for example 937-000-0000) now after that press enter then the back softkey to exit keyboard then press the down button this will bring u to a screen where u can enter your min(if u do not know it call cricket an ask them to bring it up for u. easier to call a local store an get this info. after u enter it press the back softkey u should be on cdma home sid. u will need to know your sid or find it out (google is your friend an so is your cricket store employee's) . enter it then press enter an exit the keyboard an when u see the exit screen hit ok. phone will reboot.
now u will have to of course have your phone activated to go any further so u know that process. (ps u can also activate it after u get the prl on it but until u do the hidden menu process it wont be active)
u now have text an calling but here comes the advanced user portion lol.
GETTING 3G
u will need to get the backup restore apn app from the market place its free. (email me an i can send u a copy).
u will need to install it an then backup apn. it will save to your sd card. plug it in to the computer an copy it to ur pc.
open the file in notepad as administrator the file will have all verizon settings change them to cricket. here is an example of mine after i changed it to cricket
<?xml version='1.0' encoding='UTF-8' standalone='yes' ?>
<apns count="1">
<apn name="Cricket" numeric="310012" mcc="310" mnc="012" apn="internet" user="[email protected] " server="*" password="cricket" proxy="null" port="null" mmsproxy="null" mmsport="8080" mmsprotocol="null" mmsc="http://mms.mycricket.com/servlets/mms?x-cricket-mdn=937_000_0000" type="null" />
</apns>
where the phone numbers are those will all need to be your number. an my mnc is 012 yours may be different but thats an ideal of the settings that u need to change. next u will save that file an place it on your memory card over the original file (overwrite the one on your sd card). after that access the apn backup app an delete all apns(DO NOT DELETE THE BACKUPS U NEED THEM!!!!!)now click restore apn it will ask which one an restore the one u just modified). now here is the funnest part but if done right u will have 3g......
first u will need to use qpst to setup your m.ip settings. u must use qpst 2.7 build 323. u will change your settings to cricket settings. . i can not completely remember the steps but u can google them on this part but make sure u click ur profile an change your numbers to @mycricket.com instead of the verizon settings. after that change both the ha and aaa passwords to cricket an set the home address to 0.0.0.0 then set the primary home address to 68.28.15.12 an then set second home to 68.28.31.12. after this write to phone after restart unistall qpst.
now u will install qpst 2.7 build 215. an go thru nearly the same process but in the ppp config menu. in here u will change your numbers emails to @mycricket.com in the UM and AN tabs an set the passwords to cricket. make sure in the um u change the tethered nai number to your number @mycricket.com. then write to phone an after restart turn off dial up mode an WALA flashed your fascinate.
ALSO ON A SIDE NOTE TO FURTHER EMPHASIZE THIS when u get the phone activated be sure to tell them its a zio *wink wink* so it will register in the system as a zio which will help more after u get 3g up an running. an all features only work on the 55 dollar plan
SORRY IF I GET A LITTLE SLURRY TOWARD THE END IM HUNGRY AN NEED A NAP LMAO
PS MMS WILL WORK IF THE APN IS DONE CORRECTLY AS SHOWN ABOVE!! MINE IS OFFICIALLY WORKING SOLIDLY (INGOING AN OUTGOING)

help
Hi, I was wondering if you were ever able to get MMS to work. I took my phone to the store to get it flashed and I was so upset afterwords. They flashed it however my MMS does not work. I can not send any messages out and I can get them in only from certain people. I have had several people try to send me messages and I was able to get them in from a few. Please help if you can..

for some reason cricket did some updates to their midwest region an now occasionally you wont receive mms from t-mobile or verizon customers an random other carriers if the picture crosses the maximum image size criteria. its odd. i just have em send the mms to my google mail. i recieve 98 percent of my mms tho using handsent mms so download it from the market place

works perfectly
Ok so Im gonna start by apologizing for bringing up an old thread and stating that I am not a noob in the flashing game just been a long time observer but I can vouche that this works for flashing to boost mobile. Only issue is getting vm to work but as far as 3g and data thats a different story, its hell I onlly have 1x speeds with data as we speak.
BTW mms lock code is 500667 but be very careful as you can get locked out after many times of messing with it and fixing will make you want to smash the phone into a millions pieces. I can vouche for it personally. Now my advice is if you see anything verizon in there that is why your mms is not working do not edit it in there as it will just revert back to original after reboot. You have to complete debrand the phone in order to get these settings to stick and fix the mms lock out after many stupid attempts. GOOGLE IS YOUR FRIEND ON HOW TO DEBRAND!
Hope my first post helps out someone.

ability to send mms (to recieve has been difficult because there is a lock code to get to those features that ive been unable to find out)...
Click to expand...
Click to collapse
I stumbled upon this thread by a google search.. what a weird concept
Thought I'd contribute, I Don't know if it's been pointed out anywhere else yet- Samsung has been tricky with this for quite a long time. This specifically brings to mind my SCH-a870. The MMS lock code on Samsungs is typically 6 digits, the first three are the model number of the phone, the last three spell out MMS on a phone keypad. In this case, it would be 500667.
Good luck & happy hacking!

Now from what I am hearing is that you have to physically bring in a flashed cricket phone to a cricket store to have it activated. Cricket do not enter flashed phones esn information over the phone. Now does anyone know any other method of getting the phone activated besides going into a cricket store or sending your phone via snail mail to a remote person?
And someone mentioned boost mobile. Boot act funny towards adding non-boost mobile phones to their databases, so how are you people doing that?

I have a Fascinate on 2.2.1 There is no Dial up option & teather doesn't connect right... NE idea how 2 connect?
---------- Post added at 08:34 PM ---------- Previous post was at 08:08 PM ----------
Found it... Dial **USBUI change from PDA 2 Modem

boost mobile... fascinate/mexmerize
ir0b3rt809 said:
Ok so Im gonna start by apologizing for bringing up an old thread and stating that I am not a noob in the flashing game just been a long time observer but I can vouche that this works for flashing to boost mobile. Only issue is getting vm to work but as far as 3g and data thats a different story, its hell I onlly have 1x speeds with data as we speak.
BTW mms lock code is 500667 but be very careful as you can get locked out after many times of messing with it and fixing will make you want to smash the phone into a millions pieces. I can vouche for it personally. Now my advice is if you see anything verizon in there that is why your mms is not working do not edit it in there as it will just revert back to original after reboot. You have to complete debrand the phone in order to get these settings to stick and fix the mms lock out after many stupid attempts. GOOGLE IS YOUR FRIEND ON HOW TO DEBRAND!
Hope my first post helps out someone.
Click to expand...
Click to collapse
Sorry to bring up such an old post but is it possible to flash a US cellular mesmerize to boost mobile? I have recently flashed a nexus s 4g to boost and the mesmerize seems to have all the same specs...

Half Flash for Talk and Text only? (MMS maybe?)
vengeance937 said:
Flashing Samsung Fascinate To Cricket!!!!
ok so this is the one phone that has made me wanna punch my screen since i got it. amazing phone but hell an a half an very difficult to flash. OK so to start there are programs out there u can purchase to flash this phone if u wanna pay 100 dollars or 65 at a shop. but well im cheap so i set hours on end figuring what i could out. this tutorial will get u talk, text, 3g, internet an ability to send mms (to recieve has been difficult because there is a lock code to get to those features that ive been unable to find out)...
WHAT YOU WILL NEED!!!
QPST. 2.7 build 323 an build 215.
a Samsung fascinate.
PATIENCE!!
samsung fascinate drivers
and samsung epic drivers
first you will want to... (INGOING AN OUTGOING)
Click to expand...
Click to collapse
Hey there! Sorry to bring up an old post, but I have a question regarding this flashing business. I'm set up on Cricket's $35/month talk and text only plan and I had them flash my Fascinate to talk and text only since I don't want/use data (only wifi). I want to start messing around with the phone, but I'm afraid of losing the talk&text only flash. Should this happen will this guide allow me to flash to only talk and text with some modification? (I would LIKE MMS but there is supposedly no supporting plan for smartphones without data...)

Mr_Blam0 said:
Hey there! Sorry to bring up an old post, but I have a question regarding this flashing business. I'm set up on Cricket's $35/month talk and text only plan and I had them flash my Fascinate to talk and text only since I don't want/use data (only wifi). I want to start messing around with the phone, but I'm afraid of losing the talk&text only flash. Should this happen will this guide allow me to flash to only talk and text with some modification? (I would LIKE MMS but there is supposedly no supporting plan for smartphones without data...)
Click to expand...
Click to collapse
The $35 plan does not support MMS. Only the $45 dollar plan and the smartphone plans support it. Although if you set your account up with AutoBillPay you save $5/month. You will need the phone to be fully flashed in order to support it.
Source: I work for Cricket.

Bought flashed Samsung Galaxy S2 SPH-D710, no data

Hi evryone, ill keep it short
-I bought a flashed Epic 4G (Sprint to Boost via using an Incognito)
- I RTN it, i think ##786# > Reset
- This morning I activate the phone and text and voice work fine but no 3G
I noticed that a couple of the values that showed on the Status Screen aren't there anymore, like User name: <Not Set>. Previously it used to be the namelastname(of person i got it from)[email protected] <---or something rather
I feel like there was no need to reset it, it seemed lk a good idea at the time. Looking at the guides in the forum I don't feel like I have too re-flash. am hoping I don't have since i've never had a sprint account and never really done any flashing at all.
So do i just have to update my Prefered Roaming List, or...am not really sure how to get my 3G working
the person I got it from also included the incognito used the flash the phone
Thanks
---------------
Ok so if i undertand correctly (I think) in order to fix it would i have to just input the name of my account (step: 3B0
https://www.google.com/url?q=http:/...ds-cse&usg=AFQjCNErLcHKT8AyV_E7o3CX_kjkeibzOw
but since my flashed phone is already activated.... how do i know lets say my username, NAI,etc.
If i go in ##3282# > View > Usrname : <noset> ; all IP values : 0
EVDO >DDTM: DDTM
Other > Others > MMSC URL > mmsc: mms.sprintpcs.com
very new to this whole thing, so my apologies

[Solved]
...everything is up and working

Killtac said:
...everything is up and working
Click to expand...
Click to collapse
Would you mind posting how you fixed it? Was it the references in the OP?

MoHoGalore said:
Would you mind posting how you fixed it? Was it the references in the OP?
Click to expand...
Click to collapse
As long as the MEID is right the rest should pull after ##786# as it will trigger activation again.
At least that's all I did to reverse the process...

well when I did that mine was still trying to activate via sprint, not sure if that is how it works but it didn't seem right to me, either way i never got data. i think i did it twice and didn't want to try gain since i literally had no clue what was going on...just pressing buttons see what would happen. I did enter the correct data every time phone# MEID and the other number
so I just...pretty much got an incognito battery, activated that and copied all the info that got to the Epic following the guide i sited above.