Hi all,
Last Sunday i Downgraded, rooted and installed a custom rom successfully on my Desire HD.
Then after a day or two I used a RUU to factory reset the phone(for testing).
That worked perfectly.
Last Monday i decided to try this all again so I can use the custom roms,
but when i downgraded my Desire HD, the Dutch language was gone(which was there before last Sunday).
The following languages where selectable:
- English (UK)
- English (Irish)
- Español (Reino Unido)
- Español (Irlanda)
- Français (Royaume-Uni)
- Français (Irlande)
- Italiano (Regno Unito)
- Italiano (Irlanda)
I noticed that when the phone booted up for the first time it was in Dutch language but the selection was on "English (Irish)"
But now when I do a factory reset, it is in English.
I retried using RUU file's but no luck so far..
When I boot up the phone with Vol- button and power button,
it shows the following:
ACE PVT SHIP S-ON
HBOOT-0.85.0007
MICROP-0438
RADIO-26.03.02.26_M
eMMC -boot
Oct 11 2010, 12:47:02
Is this right?
Now my phone won't boot up with a SIM card in it,
so i want to send it back to HTC...
I was wondering a few things;
1. Is it possible for HTC to see that i downgraded/rooted/installed a custom rom on/factory resetted the phone?
2. Has someone ever had a similar problem? if so how did you fix it?
3. Is there a way to completely reset the phone to the official rom it came with(except for RUU files)
(sorry for my bad English :$)
I have added a lot more extra info!
I hope someone can help me!
If you can access boot menu, try to first install an official stock rom before sending to htc.
What did gone with your phone that now it doesn't boot ?
smartgig said:
If you can access boot menu, try to first install an official stock rom before sending to htc.
What did gone with your phone that now it doesn't boot ?
Click to expand...
Click to collapse
The phone boots, but not when there is a Sim card in it(i think its a hardware problem)
I installed an official stock rom, but still no Dutch language...
Related
Hi,
- I'm stuck into the first splashscreen
- I can get into bootloader mode
- When trying to run USPL it hangs at 50... with 2 errors
The only solution I know is the factory rom (DUTCH ORIGINAL HTC ROM - not branded) but it wasn't delivered with the device on cd
Does anyone know if it's possible to flash a backed up rom from my mini-sd card from the bootloader? or get into dos from bootloader to type a command to run the exe file maybe?
ORIGINAL DUTCH HTC ROM (NON BRANDED) WM2003, WM5 or WM6
-------------------------------------------------------------------------------------
If anyone has or can find a non branded original dutch HTC rom, would be great to help me (and lots of other people). Sending in your device is 6 weeks waiting, did it last time. So the repair service has the original rom, I wonder why this isn't available online, there are so many roms downloadable online from different operators, but no original dutch HTC rom ?!?
I think I can flash back with succes, even if it was an older original HTC rom (WM2003 or SE or WM5 or WM6).
Anyone can help all the people that are stuck with the dutch original rom? or other people that are stuck and want to flash from their backups from bootloader?
Hope to receive some serious answers from experienced 'senior' xda users
Thanks for your help!
Innovator
Found it myself
Format SD card at FAT 32 with PC
put .nbh image on sd card
reset to bootloader (reset + left button above holding & let loose reset).
but same problem, rom has to be the original... not available by htc..
Ok, I think I need some help here.
I have a german (GSM?) HTC Desire, running Froyo 2.2.
Some days ago I flashed unrevoked3 and had root s-off.
I wanted it to use adFree (no success) and screenshots.
So today an update was provided and without further thinking I chose to apply it.
Now all my desire does is starting - restarting - starting - restarting...
Pushing Vol. down and pressing startbutton brings me to the HBOOT screen, recovery gives me a black screen with a phone icon and a warning sign in red.
clear storage does not affect anything. I am trapped.
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNTH0101
RADIO-5.11.05.27
Aug 10 2010, 17:52:18
If you wanna help me, try explaining what to do for noobs as I am one.
Step by step, easy to understand. My mother language is german.
=( help?
ok, if you didnt already know, you should never apply an OTA update to a rooted phone.
what rom was on your phone originally? was it branded to a provider?
please give as much information as possible as it is likely that you will need to run the RUU to get it back to stock.
The phone was bought at a 0² shop in germany. Running a stock rom. No branding (soft/hardware).
ok, you could try running this RUU...
http://shipped-roms.com/download.ph...9.00.32U_5.11.05.27_release_151783_signed.exe
this will wipe your phone, unroot, s-on but will not touch your sdcard.
put you phone into fastboot (power on and back key)
connect to PC - FASTBOOT USB should show on your phone
Run the RUU youve downloaded
if you need to, you will have to root / S-OFF again after this has completed.
EDIT-- make sure you run it as administrator if not using XP. And turn off any antivirus etc...
Better link for the RUU:
http://www.multiupload.com/LEJCW182AH
Really big thanks for the fast reply. I will try this. Downloading the stock rom with 17KB/s... having a 16000DSL connection... oh boy. I will have a nap now.
EddyOS said:
Better link for the RUU:
multiupload.com/LEJCW182AH
Click to expand...
Click to collapse
Wow. Big thx. Downloading with 1,5MB/s now.
The RUU flash stops after a while giving me an error saying something with user ID. I guess this happens because it´s not an 0² rom. HTC has special roms for 0² germany. (I had a HTC Leo, same here. I had to download a special 0² stock rom to get back to total factory settings.)
I hope there is Desire stock 0² rom somewhere...
Don't think there was an o2 DE RUU available, got a link for the o2 UK one?
http://shipped-roms.com/download.ph...00.32U_5.09.05.30_2_release_144166_signed.exe
No MultiUpload this time, sorry
Well, I tried 4 or 5 different WWE and Europe ROMs now. Everytime the same: ERROR # xxx USER ID bla bla. The flash is cancelled then...
Nothing works. Hours of research...
That's because you need a gold card, without one you're screwed
Nope.
I solved it.
I downloaded OTA_Bravo_Froyo_HTC_WWE_2.09.405.8-1.21.405.2 (3085)
(Froyo OTA manual update) renamed it to update.zip and put it on my sd. Then I booted to the bootloader, switched to recovery (I figured out how to get to the blue recovery menu) and then I installed the update.zip. It aborted suddenly, but somehow android boots normally again. Seems like it works fine. Testing now.
Ok, the system did run buggy. I downloaded this at the o² Germany website, installed it on my desire and now everything works like a charm again.
=)
Hello!
I have a question.
Currently I have the phone Rooted and a custom Rom is installed. Now you have my phone for repair. I would like the phone back in the original condition (ie without root privileges and ClockworkMod menu) to bring.
I had then the original image, which I did for the root time, have re-played.
But unfortunately I get the menu ClockworkMod not go away.
The menu is still available.
Next try:
After I had been playing the original image, and I had started the cell phone was offered by T-Mobile is an update.
But unfortunately this update is not installed.
It aborts with an error message.
Now I have read that I should just flash the original RUU, Complete new. So I went to shipped rom on the side and I have the appropriate RUU for my phone charged. (RUU with the Tmobile UK).
But this I do not get installed.
The flash process is interrupted after a few minutes with the error 140 (wrong bootloader version).
Now my question:
How do I bekome out there, I have on my phone without the original T-Mobile software ClockworkMod, or do I uninstall ClockworkMod?)
Did any of you an idea?
Thank you!
Greeting Hollux
P.S.: Sorry for my bad English.....
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
dragdusan said:
Everything you need to know about putting your wildfire to original condition is in this post:
http://forum.xda-developers.com/showthread.php?t=1160251
Enjoy
Click to expand...
Click to collapse
Hello!
Thank you for the link, but my Handy is not S-off!
I'm at HBoot 0.80 and I have the Problem, that I can not flash the original RUU for my Wildfire....
I become an Error 140 Code (Bootloader error)...
Greets Hollux
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
kylon said:
what is your language?
is your phone branded?
you have breaked your recovery?
Maybe you have installed the bootloader driver from Unrevocked
Is yes,download and install htc syn from its official site and after the installation,unistall ONLY htc sync,not the drivers
my phone is unbranded and i used this
http://shipped-roms.com/download.ph...5.55.24H_3.35.20.10_release_160191_signed.exe
it will update your HBOOT to 1.01.00001 so you need s-off to flash recovery and custom rom
Click to expand...
Click to collapse
Hello!
I have my phone with Rooted Unrevoked3.
Then a Custom Rom installed. (DK ROM).
Original is the phone branded by T-Mobile Germany. It was originally Froyo still on the phone.
HTC Sync I have installed and then uninstalled so I only have the drivers on my computer.
For flash process:
I've taken on shipped-rom RUU following:
RUU_Buzz_TMO_UK_1.14.110.1_Radio_13.45.55.24_3.35.15.19_release_130442_signed
If I'm in HBOOT USB plug mode, the mobile is an Android Phone - Android detected bootloader interface.
However, so after the start of the RUU, the phone is not detected!
If I'm in the fast boot mode, the USB phone as a USB device is Android - My HTC detected.
Even after you start the RUU detected the phone and I can start the flash process.
However, it comes out after a minute the error 140 (bootloader error).
If I install the image, which I then made by the original ROMs, will start after the one offered on Air update.
This, however, can not even install.
The flash process will start, but after a short time I see a picture in the phone with an Android males and a triangle. Then I am back in ClockworkMod menu ....
As I've written, I only want to install my phone with the original RUU from T-Mobile Germany and the menu should disappear ClockworkMod ...
Did any of you an idea?
What happens if I flash a non T-Mobile RUU ....?
I can try to flash another RUU and then later, my T-Mobile?
Please Answer, thank you
Greeting Hollux
You will have to downgrade MISC Partition, to allow "Downgrading" your ROM. (DK Custom ROM is based on 2.22.405.1, and you are trying to flash 1.10.114).
The Guide for AlphaRev X to Downgrade HBoot from 1.01.0002 to 1.01.0001 follows this same procedure, but, its for the WWE 2.22.405.1 ROM only.
But, you can follow this procedure, since you are on HBoot 0.80x
http://forum.xda-developers.com/showthread.php?t=905003
Obviously, the command version numbers will change in your case, and, you will need the TMO Rom.zip from that RUU.
NB - Disclaimer - It should work, but, it's a sensitive process, and I am not responsible for bricks.
Hello XDA comunity,
I have little bit problem with phone from my friend. He bought in germany HTC One V and wants czech localisation in this phone. This language is not there in this phone, so I tried solve it by reflash phone by any rom, which has czech language.
I unlocked bootloader, flashed CWWM recovery, but I cannot get into recovery. I spent a lot of time today by trying everything possible. I Tried TWRP too and any custom CWWM in threads from people with same problem. Everytime when I try boot in recovery, there is message, that this build is only for purposes of HTC and phone freezes or reboots.
When I tried to flash any shipped RUU ROM, I get error 155 firstly, then I relocked bootloader and error 130.
So I cannot flash another RUU ROM neither custom ROM, because I cannot start recovery.
Has anybody an idea? if you will need more info about phone, I will post it there.
Thank you very much!
Have you tried this...
Martik said:
Hello XDA comunity,
I have little bit problem with phone from my friend. He bought in germany HTC One V and wants czech localisation in this phone. This language is not there in this phone, so I tried solve it by reflash phone by any rom, which has czech language.
I unlocked bootloader, flashed CWWM recovery, but I cannot get into recovery. I spent a lot of time today by trying everything possible. I Tried TWRP too and any custom CWWM in threads from people with same problem. Everytime when I try boot in recovery, there is message, that this build is only for purposes of HTC and phone freezes or reboots.
When I tried to flash any shipped RUU ROM, I get error 155 firstly, then I relocked bootloader and error 130.
So I cannot flash another RUU ROM neither custom ROM, because I cannot start recovery.
Has anybody an idea? if you will need more info about phone, I will post it there.
Thank you very much!
Click to expand...
Click to collapse
Try with Android Ultimate Toolbox Pro - The Ultimate Android Utility
http://forum.xda-developers.com/showthread.php?t=1886562
Is it Primo U or Primo C?
When it's stuck right there, make sure you also flashed the right kernel...
KREDDYT: thanks for tip, I will try this.
It is Primo U and CID is VODAP102, can be this CID source of troubles?
//Edit: I got message about recovery mode as before, but now it boot into recovery mode, so I can do backup - thank you one more, I will try flash rom throught it...
//Edit2: Flashed custom ROM throught recovery, so I have czech language now. Still cannot flash HTC RUU ROM, but I will not experiment probably with this.
I need an Obi-wan here. I'm a noob -- though I've gotten a solid four day education
hacking at this problem.
My wife's Android Desire Z - Stock ROM, S-ON, got stuck looping with a failed
android.process.acore message and after trying a cache clear that didn't help
I set out to factory reset it. Figured the nuclear option would be dead simple. Nope.
Factory Reset from the Hboot menu simply froze the phone
at the HTC menu for an hour. Not good.
From there dozens of resets and reboots and fastboots would sometimes successfully boot
to my wife's setup (so nothing was reset at all), only to get stuck in the acore loop again.
I was once quick enough to put it into
airplane mode and that stopped the error message loops. YAY! I could try a reset
via software! But when I attempted
Settings > SD & phone storage > Factory data reset it rebooted to HTC screen, Vodafone
screen, HTC screen, vodafone screen. ANOTHER loop.
OK, next try was to flash the ROM with an original shipped version.
Couple forums in Dutch said the shipped ROM for the Vodafone Desire z in NL was Bravo/Froyo World Wide English
so I located this file:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_
signed.exe
and attempted reset by running that on a pc.
But the USB connection failed after the unit reset: Error 171, Error 170.
Tried installing HTC Sync AND the Universal boot drivers
and the Android Booloader Driver, as per the helpful advice from Bob Denny at Phandroid. (As a noob, I can't post links here, sorry)
And yep, I disabled anti-virus, had a fully charged phone (I'm hoping you get
the picture here -- I've done my due dilligence and googling before asking for help.) but
nada. RUU rebooted the phone, waited for the bootoader, and either the phone never pings the USB
port to say it's there or the PC doesn't see it.
FINE. I can put a PC10IMG.ZIP on the SD card and dispense with the frustration of messing with windows, right? Well, no.
I extracted ROM.ZIP from the RUU renamed it PC10IMG.ZIP and slapped it in the root
directory of the SD card. I booted to Hboot with the volume down and power buttons, chose
Fastboot and watched the the Zip load (blue verticle progress bar upper right of screen),
check it (brown progress bar upper right), then NOTHING -- back to the Hboot menu.
No error message, and no invitation to
update. Reboot takes me back to screen loop. Normal power-on does the same.
Further searches make me question if this is the right shipped ROM.
The RUU reports that I'm running version 2.42.161.22
(of what? Vision Gingerbread?) and the Bravo/Froyo WWE Rom reported itself to be version 1.59 something.
As this is an S-ON phone, I know I can't roll back to earlier ROMS, and can only install
the exact version as shipped.
So the questions I THINK I need answered:
1. Does anyone know for certain, or know where I can find out, which ROM
shipped with the Vodafone NL Desire-Z in 2010? I can get Kernel source for it at the HTCDev site,
but I see no compiled ROM there -- anything I can do with kernel source?
2. Anyone know where can I get the right PC10IMG.ZIP file to flash the unit from the SD Card? (I tried Shipped-Roms.com and
dozens of google permutations)
3. Is my methodology for flashing the SD Card right or is there anything in the
description above that lends anyone to believe my problem or solution is anything
other than the one I'm obsessing over?
Any help deeply appreciated.
Info from Hboot screen:
VISION PVT SHIP S-ON
HBOOT-0.05.0013
MICROP-0425
RADIO-26.10.51.26
eMMC-BOOT
Apr 11 2011, 23:36:27
Image CRC:
osbl: 0x1B4C7A4C
amss: 0xEF10821B
hboot: 0xCCCC4C36
recovery: 0x9627D8E8
system: 0xB6CE69CE
Please tell me I'm a stupid Noob and I've missed something so obvious I'll leave a
facepalm scar on my forehead, then tell me what it is so I can fix this dang phone and
get my life back. I'd be one appreciative noob.
-b
Try again with the PC10IMG.zip, this time don't extract the rom image, flash the entire zip. If this doesn't work you may need to make a goldcard. This means you will need to boot the phone and get into setting to turn debugging on and will will also need to get the proper window drivers up and running in order to use adb. (Try holding the s key on the key pad while powering on, this may keep the bootloop away)
Sent from my MyTouch 4G Slide using xda premium
demkantor said:
Try again with the PC10IMG.zip, this time don't extract the rom image, flash the entire zip.
Click to expand...
Click to collapse
Yeah, sorry wasn't clear I extracted the zip from the RUU, not the rom itself, so I've tried this one already.
Safe boot doesn't boot -- gets me the HTC screen and freezes there. I'll keep trying, as I think gettting debugging on and going gold card may be my only hope if the problem isn't incorrect ROM (or if there's no finding the correct one).
Here's a simpler question: If in my hboot screen I see
VISION PVT SHIP S-ON
Does that mean the shipped ROM was vision gingerbread and that's the only one to try,
or could my wife's "system updates" upgraded the phone from a Bravo shipped ROM?
And when I get a CID Incorrect error on a Vision Gingerbread ROM, does that mean the WWE Vision Gingerbread ROM I tried to install isn't good because it's not Vodafone, or because it's not the shipped ROM?
Any help will be thankfully appreciated!
Sorry it took so long to get back,
ship s-on is referring to you have a shipped bootloader and your security flags are on, that line is not specific to any version of the desire z
You won't be able to flash any ROM like that unless it is an upgrade from current version. I believe if you go to HTC website the latest ruu was not released as an ota and may work for you as its probably newer. If it doesn't work then you will need to get super cid in order to flash something older, which means you need to get adb working
Sent from my Nexus 7 using xda premium