Related
Sorry Guys if am asking this Question here....i have searched full XDA Forum for this ....got ans too but still have confusions.....
1st of all wanna know what is App2SD....Hope its the application to transfer all your application installation to SD card....
2nd i have tried several methods listed here in forum...but no result.....SD card is having full space and phone memory is just 50 MB left.....
Tried Defrost application and selected all installation to external media....(Hopefully this is the correct method...but didn't figured out for me yet....)
Tried to give EXT3 partition to SD of 512 MB...but here i don't know the full procedure and really confused how to go about.....
Tried for Froyo ROM's as i believe its having inbuilt capability to install all app to SD card....No result yet....
I requet all my frnds here to just giude me to the right path...i am sure i will do the rest ..... really confused with a lot of explanation given in forum....
One more small help needed...i need to have HTC Default dialer application as some of the ROM has removed it with some other application....
Waiting for reply....
pranavd1980 said:
Sorry Guys if am asking this Question here....i have searched full XDA Forum for this ....got ans too but still have confusions.....
1st of all wanna know what is App2SD....Hope its the application to transfer all your application installation to SD card....
2nd i have tried several methods listed here in forum...but no result.....SD card is having full space and phone memory is just 50 MB left.....
Tried Defrost application and selected all installation to external media....(Hopefully this is the correct method...but didn't figured out for me yet....)
Tried to give EXT3 partition to SD of 512 MB...but here i don't know the full procedure and really confused how to go about.....
Tried for Froyo ROM's as i believe its having inbuilt capability to install all app to SD card....No result yet....
I requet all my frnds here to just giude me to the right path...i am sure i will do the rest ..... really confused with a lot of explanation given in forum....
One more small help needed...i need to have HTC Default dialer application as some of the ROM has removed it with some other application....
Waiting for reply....
Click to expand...
Click to collapse
Someone please guide me........please
Instead of bumping your thread have you tried looking at the thread of the chef released rom for your phone as you might realise that others have same issue with the rom or not. I did a quick search of forums and i managed to find the answers within seconds.
We cant support your rom as we dont know what you are using / version and questions regarding that rom need to be posted in the correct forum thread
A|ex said:
Instead of bumping your thread have you tried looking at the thread of the chef released rom for your phone as you might realise that others have same issue with the rom or not. I did a quick search of forums and i managed to find the answers within seconds.
We cant support your rom as we dont know what you are using / version and questions regarding that rom need to be posted in the correct forum thread
Click to expand...
Click to collapse
Sorry M8...But i am really confused with several ROM's and Methods listed here...
I will follow your instructions in future....Sorry Again....
Different roms work differently and you really need to try one, then ask about it in the chefs rom thread and if you dont like try another. Swapping roms and trying to use the same instructions on each may not work so you are only confusing yourself.
A|ex said:
Different roms work differently and you really need to try one, then ask about it in the chefs rom thread and if you dont like try another. Swapping roms and trying to use the same instructions on each may not work so you are only confusing yourself.
Click to expand...
Click to collapse
Thanks Again.....
A2SD is indeed moving apps to the external memory. A lot of custom roms have it. It requires an EXT partition on your memorycard, an easy way to do that is to get rom manager from market
Sent from my HTC Desire using XDA App
Thread moved to Q&A.
judging by your post, you have already rooted your phone
here's an example how to do it with Official Froyo HTC Sense ROM v1.0c, which has built in old A2SD. I think it should work
- backup apps and system data with Titanium Backup Donate
- copy sd card content to pc in disk drive mode (by doing this, you will also copy your backups)
- download rom, radio and put them in root folder of your sd card
- you need to have some sort of recovery (whether it's update.zip in root, or permanent recovery - it's your choice)
- say a little prayer
- enter hboot -> recovery
- wipe all alvailable options (it depends on your current settings): data, cache, davlik cache, ext
- flash radio, it will ask for you to reboot from recovery, do it, it will restart few times, don't interrupt process of instalation.
- flash rom
-after you finish it, don't reboot, instead partition sd card using standard options: swap 0, ext2 512, fat32 rest, sd: ext2 to ext3 (this will format and partition your sd card, you will loose it's content
- reboot your phone, it will last longer than usual
- copy your sd card content from pc back to sd
- install titanium backup donate and restore system data and apps, it should force apps you previously had installed to sd
- reboot phone to finish restore
- install quick system info and check if your A2SD storage is partialy filled with data
-you should have your current apps and settings with A2SD enabled
Finally did it today with ROM manager huh......
Thanking all for support...
Sent from my HTC Desire using XDA App
This is early, hacky, and built from the work of the guys on the Vibrant forums: http://forum.xda-developers.com/showthread.php?t=739647
anomalous3 figured out that "there was only one thing running as root that could safely be replaced; the boot logo player. So, all this does is replace the boot logo player with a script that calls userinit.sh from /data/local and then calls the (now renamed) bootlogo player for those of you who want that nifty startup screen"
What this does is allows the phone to mount an ext3 partition on boot so we can have a lag fix on JP3. I'm getting 1610 on quadrant and it's pretty stable. Please someone improve this!! shaunm89 and I just hacked this together from other's work.
Directions:
1.) Create an EXT3 partition on your external SD card of 2gb. It should be the second partition after the fat32 partition
2.) Flash Modaco's pre-rooted JP3 through Odin: http://android.modaco.com/content/s...insecure-boot-clockworkmod-recovery-for-odin/
3.) Boot the phone up. Open market and install Root Explorer (costs $) and Busybox. Update busybox
4.) Download these files: http://www.megaupload.com/?d=ONGUDAIJ
Copy them across to the SD card. Move playlogos1 and playlogosnow to /system/bin. Move userinit.sh to /data/local. Use root explorer to set permissions read (all 3) write (user only) execute (all 3). 0755 for those who know linux. You can use adb to push if you wanna get fancy.
5.) Reboot. Use root explorer to see if /sd-ext exists, and if so, whether /sd-ext/data and /sd-ext/dalvik-cache exist. If so it worked! If not, reboot again and then check.
That's it. Maybe someone can package this into an update.zip, maybe someone can take it and make it more stable and even faster (ext4 for example)
great! hope we could find an easier way
Sent from my GT-I9000
Is it a must to get the pre-rooted version of firmware? However using the original SP3 then root by myself?
On the other hand, I think I will modify your init.rc as I would rather to do all the moving by myself
Great job, hope we can get EXT4 soon.
In step 4, " Move userinit.sh to /local/data" should be data/local. Quadrant benchmark 1700.
seems like the script is calling busybox, but is it necessary to use root explorer. Could one substitute root explorer with adb?
I assume root explorer is just to do things adb can do, but locally on the device instead of attached via USB.
I tried this and it and i can see sd-ext and the subfolders but is this all we need to do?
is /data/data linked to the sdcard?
I am asking because i tried to reboot the phone without the sdcard in it and i can still see all my apps and everything is working fine.
Thoughts?
Also there is an error in section 4 of your instructions. there is no /local/data, it is /data/local.
Also playlogos1 and playlogosnow files needs to be renamed with a capital P for this to work.
No need to install root explorer if you can use adb to push the files. I just wasn't sure how to use adb to push to those directories.
I fixed the other mistake, thanks
This is not ideal but gets the job done. I'm hoping you guys can make it better!
Are you able to download anything from the market after doing this?
My market is just stuck on "starting download" and that's it.
clubtech said:
Are you able to download anything from the market after doing this?
My market is just stuck on "starting download" and that's it.
Click to expand...
Click to collapse
Protected apps don't show but i've been able to get all my other purchased and free apps installed and running fine.
Strange.
I'll flash again and try again.
Yea i don't know.
The market will download some and won't others.
Also my Quadrant test is getting stuck at 3/4 stage of the I/O test so it might be my SDCard which sucks.
I used a 16GB SanDik class 4 card.
clubtech said:
Yea i don't know.
The market will download some and won't others.
Also my Quadrant test is getting stuck at 3/4 stage of the I/O test so it might be my SDCard which sucks.
I used a 16GB SanDik class 4 card.
Click to expand...
Click to collapse
sandisk are one of the best cards you can get, kingston are known to get stuck at this stage, are you sure you don't have a fake sandisk card?
anyway if you leave it running after about 10 minutes quadrant will finish and still give you a massive score of over 1500.. just shows how reliable the quadrant scores are .
does it mean that quadrant is good but speed isnt?
Tried this fix on my JP3 but no luck. I don't get these folders.
Maybe it must be MoDaCo?
If I manually execute the script I get these folders, but after reboot they are gone.
Pretty new to this maybe I'm doing something wrong?
drygmasken said:
Tried this fix on my JP3 but no luck. I don't get these folders.
Maybe it must be MoDaCo?
If I manually execute the script I get these folders, but after reboot they are gone.
Pretty new to this maybe I'm doing something wrong?
Click to expand...
Click to collapse
Ok, did it from scratch today. Format, flashed MoDaCo prerooted JP3 and everything. Stilll I don't get this to work (
Please, any ideas?
Finally got it to run faster with this fix, thanks for sharing!
drygmasken said:
Ok, did it from scratch today. Format, flashed MoDaCo prerooted JP3 and everything. Stilll I don't get this to work (
Please, any ideas?
Click to expand...
Click to collapse
Also happened to me initially. /sd-ext won't show up or if it does, it doesn't contain the correct folders though it is listed when you run 'mount'. Laggy with Quadrant result at 975.
So, went back and reformatted SD w/Fat32 then EXT3, cleared cache/data, re-flashed Modaco's JP3, installed the latest Busybox, copied files per OP and I finally got it working after a couple of re-boots (3, i think). It is running smooth so far w/quadrant 1622. GPS seems to be getting locks on SATs quickly but you still can't get to LBSTest via the keypad. Still can't write to the external sd when mounted/shared to PC.
Also tried JAC's work (see this thread: [KERNEL/RECOVERY] Vibrant EXT2/3/4 with init.d support) since it has the nifty feature allowing user to put startup scripts on boot up. I flashed his kernel but i got stuck on the 'Vibrant' boot screen. anyways, will give it another try later.
titovic said:
Also happened to me initially. /sd-ext won't show up or if it does, it doesn't contain the correct folders though it is listed when you run 'mount'. Laggy with Quadrant result at 975.
So, went back and reformatted SD w/Fat32 then EXT3, cleared cache/data, re-flashed Modaco's JP3, installed the latest Busybox, copied files per OP and I finally got it working after a couple of re-boots (3, i think). It is running smooth so far w/quadrant 1622. GPS seems to be getting locks on SATs quickly but you still can't get to LBSTest via the keypad. Still can't write to the external sd when mounted/shared to PC.
Also tried JAC's work (see this thread: [KERNEL/RECOVERY] Vibrant EXT2/3/4 with init.d support) since it has the nifty feature allowing user to put startup scripts on boot up. I flashed his kernel but i got stuck on the 'Vibrant' boot screen. anyways, will give it another try later.
Click to expand...
Click to collapse
Which method do you use for making the ext3? I made my on my hero using Amon RA could that be a problem?
drygmasken said:
Which method do you use for making the ext3? I made my on my hero using Amon RA could that be a problem?
Click to expand...
Click to collapse
I used GParted Live CD as Paragon fails to format my AData card and sorry but I am not familiar with AMON RA.
1646 thanks, very fast!
Sent from my GT-I9000 using XDA App
Would this procedure work for ext4 partitioned SD Card?
HI All,
Hope you can take a look over my setup and help me maximize the space on this phone.
I have rooted, S-off'ed and Followed several guides trying 3 Roms. I like Leedroid best and want to use it going forward. However I keep running out of space after a couple of months and find myself wiping the phone down to start again. despite using the 3.0.8.2 a2sd version of the rom.
I've read posts about this issue suggesting A2SD reintall or terminal emulator fix's but they refer to CM7 and other Roms so I am fearful of trying them out without consulting the experts.
Can anyone see what I'm doing wrong or suggest a new approach I would be willing to wipe everything and start again I.e re-install apps from the market because TB keeps my contact sms etc safe.
I dont know what a2sd leedroid comes packaged with. the "a2sd reinstall" command from terminal is something specific to Dark Tremor a2sd. This can be installed on any rom, so it could be that. This wont break anything if you have any other a2sd solution as these commands wont be programmed into the script.
If it has got Dark tremor, moving dalvik-cache onto sd ext would save space too. the command for that would be "a2sd cachesd"
Hi RootSU, Thanks for your reply. I've downloaded the terminal emulator and tried those commands, doesn't seem to work.
I suppose what I'm trying to Ask is: To run Leedroid what is the optimum configuration to fit the most apps without getting running low message coming up.
Here is the quick sys info which i got too.
LeeDroid ROM does not have the DarkTremor's script - so the a2sd commands won't work. AFAIK, it uses MCRScripts.
There should be an application like that in the ROM with preinstalled scripts.
The last time is used there was and after running the script which moved the dalvik to the SD the problem got solved.
This is the link for the patch:
http://forum.xda-developers.com/showpost.php?p=15732939&postcount=384ton
Yep, just found that add o in the thread:
http://leedroid.ftp.rshost.eu/Bravo_Addons/Move-Dalvik-to-sdext.zip
if you havent done this, it will save a lot of space.
Ok thanks,
I saved that file to SDcard rebooted to recovery and Applied Zip file, It seemed to go well took a while but no errors. Here is a new pic of system info not really much change is there ?
Can you suggest any other checks ?
Not really. may be you already did this? How many apps have you got?
Are you s-off? Maybe try data++ version?
i used to use this rom, now on HD port
can't remember, but i think the A2SD rom already moves the dalvik cache to ext, so flashing that zip won't save anything. you must have a lot of data on internal
to maximise internal storage use the data++ ROM
there is a very good FAQ on how to install it, and more importantly, explains the difference.
since you are already S-OFF, it involves changing hboot to maximise internal memory. then you can move dalvik to ext to have even more...
thanks guys makes sense, Eddie giving this FAQ a go.
Hi,
First i will say thanks for the great rom, i will try it asap (a little bit more stable)
i read about this rom in the topic since it was started .
i have some Questions, it will be my first "clean" Android (without Sense)
There should be a installer after first start of the rom after flash? Where can i found more information about the things i can chose?
Evervolv toolbox, is that an addtional Settings Dialog with more Options or still a app which can be used as "standalone"
(sorry for the bad english)
When you install it you will get some options to choose a launcher and a2sd-script.
On first start you won't get the app to set your g-acc and so on, you'll have to do that in the system settings.
And the Evervolv-Toolbox are additional settings the this rom it's not a standalone app.
Hope this helps
grtz
Please note that Sandvold ICS v. 0.4.2.1 has some stability problems at the moment. Many people experience "black screen of death", device fails to turn on screen after a period of inactivity, battery has to be removed to reboot. I found that raising the minimum CPU speed from 245mhz to 384mhz completely removes this problem. With this small tweak the rom is great! You *should* be able to change this setting with Evervolv toolbox, sadly it does not work. For some reason the toolbox runs with insufficient rights to tweak cpu speed, I did my own scripts to set cpu speed from the console instead.
cheers
/Stig
stig_dk said:
Please note that Sandvold ICS v. 0.4.2.1 has some stability problems at the moment. Many people experience "black screen of death", device fails to turn on screen after a period of inactivity, battery has to be removed to reboot. I found that raising the minimum CPU speed from 245mhz to 384mhz completely removes this problem. With this small tweak the rom is great! You *should* be able to change this setting with Evervolv toolbox, sadly it does not work. For some reason the toolbox runs with insufficient rights to tweak cpu speed, I did my own scripts to set cpu speed from the console instead.
cheers
/Stig
Click to expand...
Click to collapse
Black-screen-issues can be solved by flashing MIUI-kernel:
http://www.miui-au.com/wp-content/plugins/download-monitor/download.php?id=166
Hi! I use ICS since beta 0.3.9 and I'm now updated to 0.4.4
This release seem very stable now. Just remember that the camera preview doesn't work. Also, you might have some problem with MMS.
App space problem
Hello - some help for a newbie please (well Desire newbie)...
I did try reading though Sandvolds thread, and I have tried to remedy, but I don't seem to get much further ....
I am running an ICS beta on my tablet, so I thought it would be interesting to try it on my Desire too. On the tablet there is more memory, so I have never experienced space problems with apps.
I rooted the Desire OK - and flashed 0.4.2.1 ... ran fairly smoothly, but hit space problems when trying to load up some of my favourite apps. I have a 16gb sd card. I downloaded apps2sd from the market - and moved some of the apps. However still not able to update some system apps from the market due to insufficient space (even though there appears to be enough).
Reading the other thread, I have gathered some/little understanding... and so before flashing 0.4.4 I reformatted my SD card from recovery choosing the largest ext4 that I could.
I was then ready to go to try 0.4.4.
On trying the Amarullz script and Nova launcher - I was having lots of lag after boot and I kept getting prompted to enter PIN number and reboot the phone. (I had done a factory wipe and cleared Dalvik after flashing the ROM).
I then reflashed choose Apex launcher, stock Kernal and data2sd option.
I wiped after flashing, did a few waits and reboots - as others recommended this.
Now seems to run quite smoothly, I have added back a bunch of apps via Titanium Backup ... but I don't see any apps 'automatically' being moved to sd card. I have moved as many as I can manually.
But I can also see that I am going to run out of space again soon ....
If I look in the settings at storage I see...
Internal storage - Apps 104MB Available 26.86MB
SD Card - Apps 239MB
Am I doing anything wrong?
Looloup said:
Hello - some help for a newbie please (well Desire newbie)...
I did try reading though Sandvolds thread, and I have tried to remedy, but I don't seem to get much further ....
I am running an ICS beta on my tablet, so I thought it would be interesting to try it on my Desire too. On the tablet there is more memory, so I have never experienced space problems with apps.
I rooted the Desire OK - and flashed 0.4.2.1 ... ran fairly smoothly, but hit space problems when trying to load up some of my favourite apps. I have a 16gb sd card. I downloaded apps2sd from the market - and moved some of the apps. However still not able to update some system apps from the market due to insufficient space (even though there appears to be enough).
Reading the other thread, I have gathered some/little understanding... and so before flashing 0.4.4 I reformatted my SD card from recovery choosing the largest ext4 that I could.
I was then ready to go to try 0.4.4.
On trying the Amarullz script and Nova launcher - I was having lots of lag after boot and I kept getting prompted to enter PIN number and reboot the phone. (I had done a factory wipe and cleared Dalvik after flashing the ROM).
I then reflashed choose Apex launcher, stock Kernal and data2sd option.
I wiped after flashing, did a few waits and reboots - as others recommended this.
Now seems to run quite smoothly, I have added back a bunch of apps via Titanium Backup ... but I don't see any apps 'automatically' being moved to sd card. I have moved as many as I can manually.
But I can also see that I am going to run out of space again soon ....
If I look in the settings at storage I see...
Internal storage - Apps 104MB Available 26.86MB
SD Card - Apps 239MB
Am I doing anything wrong?
Click to expand...
Click to collapse
1). www.revolutionary.io use this
2). www.alpharev.com download cm7r2.img
3). flash the hboot
Code:
fastboot flash hboot hboot.img
4). re-flash 4.4 and choose stock a2sd
5. enable a2sd
Code:
su
a2sd install
#choose settings#
Thanks for quick response..... I have a fee more questions....
I originally rooted my Desire via revolutionary .... do I need to do it again?
I guess I then flash the zip file.
The fastboot command - can I do this from the terminal app?
hi,
fastboot command and adb must be running from computer.
you need to instal sdk android sdk android
if you run revolutionary, u don t need to do once again but to flash an hboot you must be Soffed.
dunno if revolutionary does the job... i used alpharev to do son gain S-offed and able to flash hboot from fastboot command.
I saw the option to install agps in the installer but i chose gps. How can i add the agps when i already installed the rom? Because getting gps fix in navigation is taking way to long, so long that i abort it while trying
Getting closer
@bortak
1. Done OK
2. Done OK
3. Done OK
4. Done ... BUT ... no Gapps, no Terminal app ... not much really not even a keyboard (even after 2 reboots)
- The link to Gapps for CM7r2 no longer works
5. Unable to try this as no Terminal app ... and I can't get ADB working on my PC.
where have my apps gone?
So I can't get cm7r2 to work, so I reflashed hboot back to standard, I then reflashed 0.4.4 choosing stock a2sd. I installed a2sd via terminal and moved cache too. After reboot I installed a bunch of apps .... and eventually ran out of space - as if apps not being moved.
I then rebooted, and all of the apps except the paid apps have gone. I installed a couple of apps from the. Market and they have also gone after reboot.
I turned a2sd off, then I was able to keep apps over a reboot ..... but I would like to get a2sd working.
Any ideas?
For now I am manually moving apps to SD card.
Sorry for this question...
Your 3G, Wifi is working.. My wifi, 3G is not working..
3g (once APN set up) and wifi both working well
Looloup said:
@bortak
1. Done OK
2. Done OK
3. Done OK
4. Done ... BUT ... no Gapps, no Terminal app ... not much really not even a keyboard (even after 2 reboots)
- The link to Gapps for CM7r2 no longer works
5. Unable to try this as no Terminal app ... and I can't get ADB working on my PC.
Click to expand...
Click to collapse
Did you do a wipe after flashing the rom? I had a similar problem when doing that. CWM Recovery also deletes the sd-ext partition, and as on cm7r2 there are also system apps on sd-ext, they are gone.
With the included a2sd apps should be moved to sd-ext automatically. It is not shown on the phone.
How big is your ext4 partition? And did you create it with CWM Recovery? If so, try recreating with gPartEd.
muellersmattes said:
Did you do a wipe after flashing the rom? I had a similar problem when doing that. CWM Recovery also deletes the sd-ext partition, and as on cm7r2 there are also system apps on sd-ext, they are gone.
With the included a2sd apps should be moved to sd-ext automatically. It is not shown on the phone.
How big is your ext4 partition? And did you create it with CWM Recovery? If so, try recreating with gPartEd.
Click to expand...
Click to collapse
This.
10chars
I created the extra partition via CWM recovery - maybe too large as I made it 4gb.
I wiped the device and Dalvik cache after flashing the ROM.
I then set a2sd via terminal and allowed reboot.
I then downloaded apps (or restored via Titanium)
Eventually ran out of space when downloading apps - so they were not being moved.
Apps run OK.
When I did a normal reboot - the apps 'disappeared '.
Reading Bortaks debug guide the only thing I can see that looks relevant is to try reformatting the SC card with 2 primary partitions.
Read what i wrote? Do the following:
1) Recreate the partitions on your sdcard using GParted
2) Do a full wipe BEFORE flashing.
3) Re-flash the rom and select stock a2sd
4) Do NOT wipe again
4) Reboot, start Terminal emulator, set up a2sd
5) See if apps stay
On my first try I selected stock A2SD and set it up as explained using the terminal. (using a 2GB ext3 partition, placed after FAT32)
I rebooted and everything seemed fine, and I installed several apps. After a while, though, I got the "insufficient storage" error whenever I tried to install something. In the application manager the internal memory available had a large negative value.
I then wiped everything, reformated the 2GB ext3 partition to ext4, using "Minitool parition wizard" and reinstalled the Sandvold ICS ROM with Amarullz. Everything seems fine, and it shows 2GB internal memory. However, I've noticed that the ROM gets more unstable the more apps I install (it shows 500MB installed apps now, after removing around 50MB)...
Most of the time what happens is that system apps start crashing (Google Music, Dialler, Contacts, etc.) out of nowhere. After a while normal apps crash on execution as well. Google music is useless, as it crashes after a few songs and brings down the whole phone. Other music apps don't have this problem.
Am I doing anything wrong with the way I set up Amarullz? Should I retry stock A2SD with ext4?
I'm using stock HBOOT, Nova launcher and stock kernel.
Got there ..... but.....
After repartitioning my SD card for the third time ... I finally have this working.
Thanks to all for help/advice ..... but (isn't there always a but) ....
Downloads from the Market/Play are extremely slow maybe 5+ times the same apps took before .... I have tried on different WiFi connections - still the same.
Is this a consequence of the write speed of my SD card (it is only class 4) ... I did see a post in another thread where a class 4 wasn't recommended, but this was refuted by others using a class 4 card.
Otherwise all apps seem to be running OK, with no real loss of performance.
I guess once I have finally loaded up on all the apps I want, the Play updates will be more infrequent and less of an issue.
Hello,
I installed on my Desire with STOCK HBOOT Sandvold ICS in the Version 0.17.1.1. I choosed stock a2sd in the installation and active in terminal a2sd install. Then I restored my apps by Mybackup Root. I have now the problem if I want to install a app from the market I get the error message "No Disk space available" (or something like that, I'm using German language).
I have a 512mb ext4 partition and activate a2sd in Terminal. I searched the topic for problems like that and found that I have to install mount2sd. I did this, but it didn't help either.
What should I do now? I haven't enough posts to post in the sandvold ics topic.
Greets,
Burak
You should go back to GB...
Sent from my GT-P3100 using Flashes and Thunders
nlooooo said:
You should go back to GB...
Sent from my GT-P3100 using Flashes and Thunders
Click to expand...
Click to collapse
Why? No.
If you can live with slower perfomance, active the stock a2sd again with answers: y, y ,y
vBurak said:
Hello,
I installed on my Desire with STOCK HBOOT Sandvold ICS in the Version 0.17.1.1. I choosed stock a2sd in the installation and active in terminal a2sd install. Then I restored my apps by Mybackup Root. I have now the problem if I want to install a app from the market I get the error message "No Disk space available" (or something like that, I'm using German language).
I have a 512mb ext4 partition and activate a2sd in Terminal. I searched the topic for problems like that and found that I have to install mount2sd. I did this, but it didn't help either.
What should I do now? I haven't enough posts to post in the sandvold ics topic.
Greets,
Burak
Click to expand...
Click to collapse
I had exactly the same problem. At first I chose during flashing the option "Regular a2sdext" as it seems good to me. However, nothing has changed, it was not working for me at all. Then I reflashed again with "Stock a2sd" and after booting I went to terminal and activated it. I tried it with several combinations (in some of them I got the message "Insufficcient storage available" and I only had like 5 apps installed...). At the end I finally made it work with the combination that is recommended by Sandvold - Y N Y. After that I have been installing several apps and my internal memory does not go down almost at all :good:... I will see later, but for now, this is the best set up for me....
I had this problem
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
CzarD said:
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
Click to expand...
Click to collapse
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
skubko said:
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
Click to expand...
Click to collapse
I have been testing 0.18 for a few hours now. Your phone issues should be resolved except you will encounter a new issue. You will lose superuser privilliges, to restore this, you have to install a zip of superuser through recovery.
My comments on Sandvold ICS 0.18
skubko said:
what do you mean that you lost root access? I was planning to upgrade to 0.18 today (I flashed 0.17.1 yesterday, but I have an issue with my phone - I cannot recevie any phone calls - and I hope another flash might help it...), so I guess I will wait a while....
Click to expand...
Click to collapse
I had 0.17.1.1 and all was well, it was tiny bit laggy, but overall it was cool.
i updated to 0.18, and I lost root access: the apps requesting SuperUser premissions were denied. (If you don't know what root access is, please google it)
As iyf said, you can flash the zip provided in Sandvold's official thread to restore root access. Check page 1601 or so for the flashable zip that will restore root access. I did so, and regained root access.
Then I got back all my apps as Sandvold 0.18 is my daily driver. But as I was using it, I noticed that whenever you change something in the system settings, it does not apply immediately. For example, I want my phone to lock immediately when it goes to sleep, well it simply doesn't. The power menu lost a few of the shortcuts it had in 0.17.1.1 (sound profiles...) and even if you restored them in the system settings, it won't change.
All in all, 0.18 is great step in terms of stability and reactiveness. No more scroll lag, apps open seamlessly, and no more 3G signal problems. The camera still isn't working though. Nevertheless, bizarrely the system lost its coherence: the system settings are not immediately applied and used, and the screen just won't lock. Those are the problems I encountered this afternoon.
I hope Sandvold takes a look at this thread as I cannot post on the official ROM thread coz I just registered on XDA.
(My Home button died today, even if I press it really hard, it won't respond, but I think it's a hardware issue)
EDIT: About the no more space issue, I had this today even though there was plenty of space left. I rebooted the phone and the warning disappeared.
CzarD said:
I had 0.17.1.1 and all was well, it was tiny bit laggy, but overall it was cool.
i updated to 0.18, and I lost root access: the apps requesting SuperUser premissions were denied. (If you don't know what root access is, please google it)
As iyf said, you can flash the zip provided in Sandvold's official thread to restore root access. Check page 1601 or so for the flashable zip that will restore root access. I did so, and regained root access.
Then I got back all my apps as Sandvold 0.18 is my daily driver. But as I was using it, I noticed that whenever you change something in the system settings, it does not apply immediately. For example, I want my phone to lock immediately when it goes to sleep, well it simply doesn't. The power menu lost a few of the shortcuts it had in 0.17.1.1 (sound profiles...) and even if you restored them in the system settings, it won't change.
All in all, 0.18 is great step in terms of stability and reactiveness. No more scroll lag, apps open seamlessly, and no more 3G signal problems. The camera still isn't working though. Nevertheless, bizarrely the system lost its coherence: the system settings are not immediately applied and used, and the screen just won't lock. Those are the problems I encountered this afternoon.
I hope Sandvold takes a look at this thread as I cannot post on the official ROM thread coz I just registered on XDA.
(My Home button died today, even if I press it really hard, it won't respond, but I think it's a hardware issue)
EDIT: About the no more space issue, I had this today even though there was plenty of space left. I rebooted the phone and the warning disappeared.
Click to expand...
Click to collapse
of course I know what root is, otherwise I would not be here, right? ... I just did not understand what happened to you when you updated to 0.18.... Now I understand.... and regarding to your issues - in 0.17.1 I had exactly the same problem - my screen did not lock even I set it up correctly and I also had the problem with Home button, it simply did not work + I could not receive any phone calls... all of that was really annoying and I tried to find some help on sandvold's blog, without any success, I also tried their IRC, nobody helped me either. I did not want to do a full wipe again, but at the end I did (and now I have to set up everything as well ) but after full wipe, everything is working correclty... I can receive phone calls, my screen locks and home button is also working ... so I recommend you to do a full wipe, I am sure it will resolve your issues as well...
CzarD said:
I had this problem with one application. When installing from market, there'd be a pop up message saying that there was no more storage space even though there was plenty.
A few hours later, everything went back to normal and I managed to install all the apps I wanted.
(Side question: have you guys updated to Sandvold ICS 0.18 Beta?! I have, but I lost root access, so now I'm trying to regain it. Could someone alert Sandvold? I'm a new member and I can't post to 'Android development forums")
Click to expand...
Click to collapse
I also lost the root access with Beta 0.18(with full wipe),
(Beta 0.17 "root access" is OK!)
Superuser is out of order with this issue so that I can't activate A2SD
btw,
I have once tried the "AD2SDX", but didn't work normally:
I merged 1GB ext4 for it. And every time when I install about 10~15 Apps
A message on the top of the screen would tell me that I almost reached the limit.
(I'm using traditional Chinese, I don't know what it was written in English)
skubko said:
of course I know what root is, otherwise I would not be here, right? ... I just did not understand what happened to you when you updated to 0.18.... Now I understand.... and regarding to your issues - in 0.17.1 I had exactly the same problem - my screen did not lock even I set it up correctly and I also had the problem with Home button, it simply did not work + I could not receive any phone calls... all of that was really annoying and I tried to find some help on sandvold's blog, without any success, I also tried their IRC, nobody helped me either. I did not want to do a full wipe again, but at the end I did (and now I have to set up everything as well ) but after full wipe, everything is working correclty... I can receive phone calls, my screen locks and home button is also working ... so I recommend you to do a full wipe, I am sure it will resolve your issues as well...
Click to expand...
Click to collapse
By full wipe you mean:
1. wipe data/factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
right?
I always do that when I flash a new ROM... Anyway, will try again later and hope that it works.
Caesar
CzarD said:
By full wipe you mean:
1. wipe data/factory reset
2. wipe cache
3. wipe dalvik cache
4. wipe battery stats
right?
I always do that when I flash a new ROM... Anyway, will try again later and hope that it works.
Caesar
Click to expand...
Click to collapse
yes, it is what I meant... I did full wipe before flashing and then another after it ... I do not wipe battery stats during that process,but it does not matter I hope it will work for you...
UserMatty said:
I also lost the root access with Beta 0.18(with full wipe),
(Beta 0.17 "root access" is OK!)
Superuser is out of order with this issue so that I can't activate A2SD
btw,
I have once tried the "AD2SDX", but didn't work normally:
I merged 1GB ext4 for it. And every time when I install about 10~15 Apps
A message on the top of the screen would tell me that I almost reached the limit.
(I'm using traditional Chinese, I don't know what it was written in English)
Click to expand...
Click to collapse
Whenever I got this message, I'd reboot or hot reboot and it would disappear. I can't remember if I had the same script.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
skubko said:
yes, it is what I meant... I did full wipe before flashing and then another after it ... I do not wipe battery stats during that process,but it does not matter I hope it will work for you...
Click to expand...
Click to collapse
I did a full wipe again, and everything went back to perfect working order. Thanks man
CzarD said:
Whenever I got this message, I'd reboot or hot reboot and it would disappear. I can't remember if I had the same script.
---------- Post added at 08:41 PM ---------- Previous post was at 08:36 PM ----------
I did a full wipe again, and everything went back to perfect working order. Thanks man
Click to expand...
Click to collapse
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
UserMatty said:
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
Click to expand...
Click to collapse
It's not okay, minitool doesn't do that correctly. Use 4ext recovery to partition your sd card.
Sent from my HTC Desire using Flashes and Thunders
UserMatty said:
you mean working with AD2SDX ?
Can I ask you how do you merge and format ext4 ?
Actually, I'm using MiniTool Partition Wizard, is it okay ?
cause I did reboot after I saw the message, but didn't work.
But I surely know that I can see "1GB" in "Apps" in "settings"
quite confusing
Click to expand...
Click to collapse
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
CzarD said:
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
Click to expand...
Click to collapse
just to add - I have Amon RA Recovery and I partitioned my SD card by that, it was also working without any problems everytime I did it...
@CzarD - I am glad to hear that the wipe helped you...
You should try out the Amarullz or INT2SD from the Aroma installer. I have INT2SD and I have 1,3G of free space (2G EXT partition)
CzarD said:
Quite confusing indeed. I must say I'm no expert developer or programmer, heck I'm an engineering student. i just experiment on my Desire. But my experience in bricking/unbricking/flashing/etc tells me the following:
Minitool wizard apparently is not okay. I used it at first too but my Desire just could not read or detect the EXT3 partition I created. I tried EXT4. I tried different roms and scripts, none worked for me. (To be honest, I only tried 3 roms and a few scripts).
What I used is plain simple: Clockworkmod Recovery partitioning tools. It works for me!
First restore your SD card to full FAT32 configuration (I might suggest changing the basic storage unit from a few bytes to a few kilobytes as it might increase SD card responsiveness).
BACK IT UP, you will lose everything on it when you partition it in CWM.
Boot into recovery and select partition SD card (It is advised that the size of your partition does not exceed 1.5 GB as a few ROM developers have pointed out - not Sandvold though- I use 512 MB, which is more than enough for me). Set SWAP to 0 Bytes. (i have no idea what swap is, should google it, but most threads advise a swap of 0 B).
That's it, you have your partition.
I use CWM and Sandvold 0.18. If you use this setup, everything should be okay, at least it's ok on my phone.
I use stock a2sd when flashing Sandvold ICS ROMs.
I'm on stock HBOOT, S-OFF, and using the regular Kernel that comes with Sandvold 0.18. (I tried tiamat, but the battery dies after half a day of use!)
Click to expand...
Click to collapse
As I know, swap in linux is somewhat like virtual memory in Windows.
Will be launched when the system is in low memory.
That's exactly everything I know
I'm now Using Revolutionary CWM v4.0.1.4, stock HBOOT, S-OFF
And just follow your way to full wipe then install the system again(stock a2sd)
I still can't get the root access. thus, I can't activate a2sd in terminal
PS: with Beta 0.18
But Beta 0.17.1 currently work!