Related
I'm new to kernel flashing. I have been playing around with snap and kings kernel. I don't have a problem flashing snap, but once I have it installed it works fine for awhile, but then it reboots itself or goes into a state where it won't turn on and I have to pull the battery. I tried 7.6 both bfs and cfs and the same thing happens. I also tried 7.5 but once I flashed it nothing showed up in the apps to install.
For kings kernel I flashed it and it booted up fine but it seemed to freeze up and I couldn't unlock my phone after the boot.
Am I doing something wrong when I am flashing these? I am running the nightlies of cyanogen. Also, What are some other kernels that work well with cm?
Thanks!!!
Kernals seem to be a taste for the phone itself and not the rom...
My Evo doesnt seem to like any other kernals than stock I have tried many rom/kernal combos and the only way i get no issues and best battery is to run stock kernal
I ran fresh with netarchy and kings like some others-that had great battery and mine just drained fast so I am done with the kernal swapping for now and jut keep playing with roms.... Trying out Virusrom right now not bad so far
Try wiping the cache and dalvik cache before flashing the new kernels. That might help.
Another thing that might help is posting this in the right section. More people with the knowledge and good insight that you need will be more apt to answer you in the Q&A section.
I've tried clearing everything including data but it still would self reboot
the snap kernels do not work with the recent versions (nightlies) of CM.
The framework has been redone, and you will freeze.
You have to use the stock kernel.
Ziggy just made an AOSP kernel, but its buggy.
Toast has a .35 kernel that works good on the new frame work.
I just was able to use a different kernel of kings. It really doesn't enhance quadrant scores, but im want to see what it does to the battery. Where can I download toast.
Also, I noticed that now my unlock screen is different from my wall paper. Is that a kernel issue?
Check to make sure SetCPU is disabled (or any other overclocking utility), and wipe your cache/dalvik. If all else fails, go with the Snap 7.6 failsafe method.
Kings AOSP #1 has worked best for me using cm nightlies. I have easily doubled my battery life. Has anybody else had success with any other kernels? Is toast an AOSP kernel?
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
DraginMagik said:
as TheJoker and drmacinyasha commented...
snap and king use the .32 kernel. snap http://forum.xda-developers.com/showthread.php?t=733099
cm6 nightly is currently using .34 kernel
Toast has a .35 test1 kernel available for CM6 (http://forum.xda-developers.com/showthread.php?t=735596)
ziggy has a kernel as well. (http://forum.xda-developers.com/showthread.php?t=819402)
zendroid has a kernel - http://forum.xda-developers.com/showthread.php?t=831021
turn off setcpu until after you reboot with the new kernel. don't forget to read the kernel threads OP for possible hints on setcpu configs (ie: snap7.6 works well with conservative governor)
yes they are all AOSP.
i would not advise a newbie to play with the snap or king kernels until the .35 revisions have been released. this is due to changes in the Framework.apk file. you are likely to find that a current CM6nightly w/ the snap7.6 kernel = no bluetooth. new kernels should be hitting shelves very soon. personally, i'm looking forward to loading up the snap kernel once its done cooking, i really liked that kernel.
most are just fine with the stock kernel
many have commented positively on the toast test1 kernel (aside from a hang issue at startup)
ziggy & zen have a bit of work to do on their kernels it seems.
once .35 is 'done' you'll find a bunch of movement on the the kernel threads.
Click to expand...
Click to collapse
Thanks! this really helped. This may be a dumb question, but where do you find out what kernel runs with the ROMS. eg .35
I really want to find a good combination that gives me good battery life and performance. so will snap 7.6 work with cm 6.1 rc 1 rom?
I saw for CM6.1 the stock kernel is the best. I have gotten the best performance, battery life, and bug free with the stock kernel.
Snap 7.6 would get stuck on the splash screen and required several battery pulls.
Toast .35 works good, but after about an hour or two for some reason it brings my fps cap down to 37, so all my scrolling and games run like ****.
Wait for Snap 9 or the official toast .35 kernel. Stock is just fine.
I was bored last night and tried cm 6.1 with snap 7.6 just for fun, but it seems to be working fine. The boot was quick too, it was on the cyanogen boot image for about 3 seconds before it started up. Quadrant scores are in the mid 2000s. No problems with anything else so far.
Is there a snap website or channel log? I can only fined directories.
So far I have tried unrEVOked and AVA-FROYO V10.
unrEVOked is little bit behind on latest kernels and is stuffed with Sprint garbage. It did have great battery life with 4G and WiFi enabled (12 hours for me).
AVA-FROYO V10 was OK, very little Sprint crap... but battery life on it was extremely unpredictable (from 4 hours to 12 with cell standby chewing up most).
Unfortunately the latest radio update messed it up and now I need to reflash everything, so might as well look at other roots.
Myn
Sent from my PC36100 using Tapatalk
Do you mean ROM?
WRONG SECTION !
unrEVOked and kernels ? LOL
I am sure they will move it to the right section.
Yeah, you are right, I did mean ROM. Had a massive brain cramp, so I called it a root
Re. unrEVOked, hey, I had to start somewhere
Cyanogen..... soon
Sent from my PC36100 using XDA App
I didn't have the best luck with AVA V10, but V9 has incredible battery life. Here is a link:
http://www.4shared.com/dir/kqCqyssL/Ava_Roms.html
Whichever ROM you download, you can open the zip (don't extract), go to system>apps and delete any apks you don't want it to install when you flash it. Of course, make sure you know what apks you are removing first so you don't get problems later and have to end up re-downloading/re-flashing your phone.
unrEVOked is not a ROM, nor a kernel, and has nothing to do with battery life. Other than the superuser app showing up, it should not affect anything at all. It's a rooting process, specifically intended to unlock your NAND (S-Off, visible in the bootloader).
Popular ROM options are Fresh, MIUI, CyanogenMod. Fresh has fully working WiMax. CM is close. Don't know about MIUI, but it's probably not packing working 4G. None of them have any of the Sprint apps by default.
You can bake your own Fresh ROM with whatever you want included. CM doesn't even include the Google Apps by default (you can add them easily), so it's even trimmer.
Once you are fully rooted, and familiar with the nandroid backup process (and Titanium Backup), you can switch between ROMs fairly easily and make your own decisions.
To get started, root and then flash Fresh. Actually, wait a few days (but don't accept the current OTA if you haven't already), and install Fresh once it's been updated. Because it's based on stock with Sense, you can probably flash without clearing your data (DO clear your caches) and get off to a quick start.
Yeah, I am still learning this rooting process. I have very little time available for playing around a bit and no way in hell am I going to use time of my devs in the office. Hence me doing it the lazy way - asking you which ROM is the best for my needs and then flashing and forgetting it.
BTW, thanks for the advice so far. Saving me a lot of time!
MYNs is popular or if you want a stock one, I suggest looking at the ReEngineered Stock ROM that aamikam made. He spent alot of time fixing up the apks so that they are smaller in size and speeds up the ROM.
i would just find a rom that you like and run with it. the rom itself shouldn't make THAT much difference. from what i have seen, its your kernel that really makes the difference in batter-life and performance. Most of the bloat-ware in the majority of these roms can be removed pretty easily.
Myn has some great stuff for ROMS. Ava V10 (if you have bad battery, try a different kernel)
Here are my 3 fav Kernels:
Hero's Laptop Kernel (all i have to say is WOW)
Net's 4.2 or 4.1
King's CFS
ROMs:
Sense: Calk's or Myn's or for a pure stock feel try ReEngineered 3.70.651.1.
AOSP: Cyanogen Mod (No Contest)
Kernels:
I always stick with Stock on all the ROMs I have tried.
Have fun flashing man.
Try Azael X its very fast very little no bloat and stable 4G plus battery life is great he will update to 3.70 soon he's working on it now Rick is very picky about letting his roms out with bugs so he tests and tests before release
groovyipo said:
Yeah, I am still learning this rooting process. I have very little time available for playing around a bit and no way in hell am I going to use time of my devs in the office. Hence me doing it the lazy way - asking you which ROM is the best for my needs and then flashing and forgetting it.
BTW, thanks for the advice so far. Saving me a lot of time!
Click to expand...
Click to collapse
Simply put;
Myn Warm (Sense)
CM (non Sense)
ROM: Azrael X, myn warm, baked snacks
kernel: ziggy dec5, baked laptop, net 4.2
Battery life:
hxxp://img202.imageshack.us/img202/2874/snap20101219181053.png
--
Using Azrael X latest and ziggy dec5
Sent from my PC36100 using XDA App
Where did you download your ziggy dec5 kernel?
groovyipo said:
Where did you download your ziggy dec5 kernel?
Click to expand...
Click to collapse
Ziggy471.com
Sent from my PC36100 using XDA App
Now I am just pondering what are the major advantages of switching out stock kernel on Azreal X v.2.1 to Ziggy?
Hey android fam,
ima keep this short and simple.
1. I rooted my htc evo
2. I want to know whats the best rom out there (2.3 with everything working 4g or close to it etc)
3. After i download the rom i want, whats the next step to install it the right way? (i already downloaded "titanium backup" what else do i need?)
thanks
A good starting place,
Try Cyanogenmod, MIUI, Myns Warm, and MikFroyo
I would add Salvage-Mod 1.2.1 to the list mentioned above, specifically with the Tiamat 3.3.7 kernel and LauncherPro. It flies on my device and everything works.
posting & replying via the XDA Premium app.
thanamesjames said:
A good starting place,
Try Cyanogenmod, MIUI, Myns Warm, and MikFroyo
Click to expand...
Click to collapse
If your looking for AOSP try Cyangenmod, Ultimate Droid,
Sense My favorite so far is probably Mikfroyo.....Second Myns warm...third Fresh....
Just flash all of them and just mess around to find out what you might like. a good starting point is to download Rom manager but don't use that program to flash, just use it to download, then boot into recovery and flash manually. Good luck...
If your really wanting to play around you can try flashing different kernels which I am still trying to figure out a good sense kernel to use for mikfroyo. Good luck
Thanks everyone
Sent from my PC36100 using XDA Premium App
Personally, I have been running Deck's 2.3.3 GB AOSP ROM. It's fast, stable, and everything works, including 4G. I use Tiamat's 3.3.8 SBC kernel and get great battery life as well. You can find his thread at PPC Geeks. He said when he releases the final version, he'll post it here at XDA.
Deck's GB is def my fav GB ROM. Everything works. The final version (1.0) is releasing today at 6pm est. The main thread is at PPC geeks, but Deck said he would start an official thread here once 1.0 launched.
"Best" -- in this case -- is subjective.
jsantos248 said:
Hey android fam,
ima keep this short and simple.
1. I rooted my htc evo
2. I want to know whats the best rom out there (2.3 with everything working 4g or close to it etc)
3. After i download the rom i want, whats the next step to install it the right way? (i already downloaded "titanium backup" what else do i need?)
thanks
Click to expand...
Click to collapse
Congrats on rooting. Just remember that rooting isn't everything. It's just like getting an admin or superuser account on a Windows or Linux machine. It gives you the ability to modify system files that you normally can't do as the default user.
You need to make sure that your phone is NAND unlocked and you need to flash an alternate recovery. A recovery is kind of like a boot-disk built into your phone. You can boot into "recovery mode" and flash data to the phone. This is how you install a new ROM. The two big recoveries are Clockwork and AmonRa.
Basically you download a ROM in zip format, put it someplace on your SD card where you can find it, boot into recovery, do a backup (make an image you can restore from if things don't go well) and then format data, cache, dalvik, etc.
Once you have a clean slate, flash the ROM from the zip file on your SD card and wait for it to finish. Reboot and enjoy your new phone! It's like installing a fresh copy of the OS with various modifications.
There is a bit more to it that all that but that is the gist. Once you are familiar with the process it's easy. Before long, you'll be comfortable with reading about a new ROM, making a quick backup and flashing it to check it out. If it is good you keep it, if it sucks you restore your old backup. I go through phases where I like what I have and then the bug will bite me and I try like 2 or 3 ROMs in a week.
wmstwo002 said:
Personally, I have been running Deck's 2.3.3 GB AOSP ROM. It's fast, stable, and everything works, including 4G. I use Tiamat's 3.3.8 SBC kernel and get great battery life as well. You can find his thread at PPC Geeks. He said when he releases the final version, he'll post it here at XDA.
Click to expand...
Click to collapse
Just my 5 cents, but you should get better battery life on 3.3.7, as in 3.3.8, the minimum voltage was raised to help those that flashed the kernel and natively got reboots.
Ryjabo said:
"Best" -- in this case -- is subjective.
Click to expand...
Click to collapse
+10000000000000
FOR ME:
When I'm in an AOSP mood, it's CyanogenMod. It was the first one I tried and I'm too lazy to adjust to other AOSP roms LOL. I have tried other AOSP roms, but I like the features included in CM and the support he gives.
When I'm in a Sense mood, it's usually Mik roms (MikFroyo, MikZ, MikGinger, etc) because what he does to those roms is nothing short of amazing. Speed, stability, and everything just works. When Myn gets around to releasing his Gingerbread rom that's going to be my DD.
jsantos248 said:
Hey android fam,
ima keep this short and simple.
1. I rooted my htc evo
2. I want to know whats the best rom out there (2.3 with everything working 4g or close to it etc)
3. After i download the rom i want, whats the next step to install it the right way? (i already downloaded "titanium backup" what else do i need?)
thanks
Click to expand...
Click to collapse
Well if you are looking for 2.3.3 with everything working including 4g and GPS I would recommend CyanogenMod. You battery life might be kinda crappy even with the Tiamat 3.3.8 kernel as compare to a 2.2 rom.
Im a fan of Mikz and Kings is you like sense. They both do amazing work and their custumization is top notch.
I'm running Myn's Warm TwoPointTwo (Sense ROM) with the Netarchy 4.3.1 cfs-havs-nosbc kernel and Launcher Pro Plus.
Lightning fast underclocked at 499 mHz awake and 128 mHz with screen off (using SetCPU). Battery life is shocking too with the Seidio 3500 extended battery. Unplugged at 7AM and heavy usage all day (phone calls, texting, email, web surfing, Pandora, etc) it's still around 45-50% at 11PM
Always searching for a better battery kernel though, lol
Jack
Well im on Kings Unleashed R-5 to.the the best rom right now, but im about to try a CM7 cuz people be telling me about the speed and stuff
Sent from my PC36100 using XDA Premium App
Sorry, but people claiming everything is working on CM7 for htc evo obviously don't use their cameras. Still shots are not taken at full 8mp at proper aspect ratio. There is also no 720p recording.
Have a look at Elite Series III.It's super fast and has everything working. The theme it comes with is amazing. Proper flash instructions are on that thread and there is nothing else you need to fux with after flashing.
Sent from my PC36100 using XDA Premium App
Hi all,
My partner has been experiencing a few issues with her 'stock' Orange branded Desire, not only being affected by calls dropping and Data being unreliable [sometimes works, sometimes doesn't], but also pretty poor battery life.
On that note, we think it may be a good idea to root her Desire and apply a custom ROM. Are there any ROMs out there which specifically target battery optimization?
I am assuming a new ROM/radio will help resolve her call/data issues, so battery is the next priority to look at.
I'm thinking CM7.0.3 is the safe bet [moreso because that's what I'm running on my Legend ] but is there a ROM out there in the Desire community known for great battery performance?
On a side note, if you can also recommend the best radio to flash [unless it's part of a ROM already] that would be cool.
Thanks in advance,
c_man
At first reducing the brigthness-level, turning off 3g/hsdpa, gps and wifi (sleep policy to "never" [settings > wireless & networks > wifi settings > press menu > advanced and set wifi sleep policy to Never; press menu and save) and only turning them on when needed will improve battery life.
A rom with a good battery life is redux:
Features:
[...]
Built for day-to-day usage, meaning stability and good battery life
[...]
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=896213
I have installed it myself with the kernel in my sig. Especially the standby-battery-power is really impressive. IMHO all small aosp-roms like e.g. cm7, devnull, oxygen or redux will have good battery life. Furthermore, i good kernel with appropriate settings becomes important.
But final one can say, the battery life is most related how much you use your phone.
Hope, this could help you.
If your wife is used to the Desire as it is (inc. HTC Sense) then I would highly recommend LeeDroid.
Its well indexed and offers good battery life. The fact that it's based on Gingerbread (2.3.3) is a big help for battery. As far as I know Orange Desire is still on Froyo?
The big benefit with LeeDroid is that if your wife isn't as keen on trying to learn to use stock and likes HTC Sense, she will not notice any difference. It would be worth putting an ext partition on the SD card as well so she wont run out of room for apps.
I have installed 7.0.3 and my battery life drains super quick. All i have enabled is mobile network. So if you ask me.. .I would say CM 7.0.3 is not a very good batt saver.
Im using Redux at the mo
3ma drain on standby with GPS and BT enabled
ManU Havs Axi kernel undervolted with Vipermod
I found GV to be very good on battery drain too...
In all fairness you wont believe the difference in battery life between stock and a custom rom imho
Thanks for the replies so far.
@MatDrOiD - thanks, currently its between CM and Redux.
@JokerNJ - She doesn't mind having to use 'pure' Andoird, she's used my Legend on CM7.0.3 and know's its not massively different. We'll take a look at LeeDroid...
@alexander7567 - this is not what we wanted to hear. CM7.0.3 has done wonders for my Legend...
naf007 said:
In all fairness you wont believe the difference in battery life between stock and a custom rom imho
Click to expand...
Click to collapse
Positively or negatively!?
@MatDrOiD - you mention that you run Redux with Kernel: 2.6.35.9-Redux-SVS_BFS + ULV-Script.
Is there a recommended kernel for Leedroid and also for CM7.0.3?
This is slightly offtopic but can you supply a link on how to install/flash a kernel? I've not done this before [for my Legend].
Also what radio should I go for her Desire?
EDIT:
Doesn't matter if the radio and kernel you suggest are not the latest/greatest/cutting edge, but as long as they are stable and known for good performance, that is good enough!
alexander7567 said:
I have installed 7.0.3 and my battery life drains super quick. All i have enabled is mobile network. So if you ask me.. .I would say CM 7.0.3 is not a very good batt saver.
Click to expand...
Click to collapse
Mobile network is one of THE battery killers at all. Turn it off and just turn it on, when you really need it.
c_man said:
@MatDrOiD - you mention that you run Redux with Kernel: 2.6.35.9-Redux-SVS_BFS + ULV-Script.
Is there a recommended kernel for Leedroid and also for CM7.0.3?
This is slightly offtopic but can you supply a link on how to install/flash a kernel? I've not done this before [for my Legend].
Also what radio should I go for her Desire?
EDIT:
Doesn't matter if the radio and kernel you suggest are not the latest/greatest/cutting edge, but as long as they are stable and known for good performance, that is good enough!
Click to expand...
Click to collapse
I do not know a recommended kernel extra for leedroid. For CM7 (or aosp-roms in general) the manu-kernel is very good:
http://forum.xda-developers.com/showthread.php?t=883598
Furthermore the couttstech-kernels are very good (they can be used for sense-roms as well:
http://mirror.couttstech.com/android/index.php?dir=bravo/kernel/
But i would say, search for the corresponding threads of this roms, i think you will find a good kernel.
Flashing a kernel is very easy:
1.) Download the kernel you want to flash as zip and copy the file without extracting on your sd-card
2.) Go into recovery
3.) Do a nandroid-backup, just in case.
4.) Wipe cash + dalvik-cache
5.) Flash zip rom sd-card like you would flash a rom
6.) Reboot
You are done.
I would recommend to use this radio, which is the mentionend recommended radio in the corresponding thread for the rom. E.g. for leedroid it's 32.56.00.32U_5.17.05.08. If there isn't mentioned any recommend radio, just use the radio which comes with the rom. Nevertheless, you are free to update to the respectively newest one:
http://www.mofirouz.com/wordpress/2011/03/htc-desire-radios/
You flash a radio like you flash a rom or kernel. But when you do this, DO NOT TOUCH YOUR PHONE UNTIL IT'S FINISHED. With flashing the radio you update your desire's hardware. If there somehting goes wrong, your desire will be bricked probably. So before flashing the radio, check the md5-sum of the downloaded zip.
Thanks! I didn't know the method to flash a kernel was the same I've done radio before for my Legend so that's all good.
Now all that is left is for my partner to choose a ROM and away we go...!
c_man said:
Thanks! I didn't know the method to flash a kernel was the same I've done radio before for my Legend so that's all good.
Now all that is left is for my partner to choose a ROM and away we go...!
Click to expand...
Click to collapse
Thanks, happy i could help. But after your last post i edited the procedure for flashing a kernel and named another recommend kernel. Take a look at it.
MatDrOiD said:
I do not know a recommended kernel extra for leedroid. For CM7 (or aosp-roms in general) the manu-kernel is very good:
http://forum.xda-developers.com/showthread.php?t=883598
Click to expand...
Click to collapse
Just to be clear, which one?
This one? ManU-Version 1.4 :Gingerbread-HAVS-AXI-CFS
MatDrOiD said:
Thanks, happy i could help. But after your last post i edited the procedure for flashing a kernel and named another recommend kernel. Take a look at it.
Click to expand...
Click to collapse
Thanks, I saw the link to couttstech-kernels however it's slightly difficult to make an informed decision/choice as to which one to go for!
c_man said:
Just to be clear, which one?
This one? ManU-Version 1.4 :Gingerbread-HAVS-AXI-CFS
[...]
Click to expand...
Click to collapse
You are free to choose. But this is the recommmended and most used one (also by developer).
Danke schön...!
Fingers crossed for the root [will use unrEVOked 3 - this shouldn't be a problem even though her Desire is Orange branded as I understand it - someone please correct me if I'm wrong]
You Desire guys are lucky to have so many ROMs/Kernals to choose from.
For us Legend guys the choice is almost made for us [and I sold my Desire to own a Legend ].
Another vote for LeeDroid here for the Desire. I have been using LeeDroid since I got mine and have never had a problem with my battery life at all. I can go for two days at normal usage without a charge. Even with heavy use I can go a whole day. I charge mine each night in a dock on my bedside.
Thanks FlareHeart, is that running the radio/kernal that arrive with LeeDroid too? No other mods?
Now it's up to her to decide if she wants a ASOP ROM or one based on Sense .
Hopefully we'll root tomorrow...
I used Amethyst a bit before the dev jumped ship to Nexus S. It used Coutt's kernel for it and the longest I got out of a full charge was 2 days. And that was general usage (few texts/phone calls a day, push email, Facebook/web browsing).
Using Oxygen now and I frequently get over a day and a half on general usage with thalamus's kernel.
best Rom for desire
I have used devnull then gingervillain, all vanilla roms. but without sense there is no sense!!. thus I went for insertcoin 1.0.5. which is stable, very nice. u need ext4 partition. 500 mb ok. use minitool partition wizard for Windows. everything is working fine.
FlareHeart said:
Another vote for LeeDroid here for the Desire. I have been using LeeDroid since I got mine and have never had a problem with my battery life at all. I can go for two days at normal usage without a charge. Even with heavy use I can go a whole day. I charge mine each night in a dock on my bedside.
Click to expand...
Click to collapse
What Leedroid version?
I am thinking of installing another kernel with stock 2.2 and was wondering if anyone could suggest a good one. I am looking to overclock and do not care too much about battery life (but i dont want to completely throw it out the window) since i have an extended battery already.
Also, I am wondering if I will have to wipe my phone to install a new kernel (unless it depends on which one)
Thanks for the help
raisins said:
I am thinking of installing another kernel with stock 2.2 and was wondering if anyone could suggest a good one. I am looking to overclock and do not care too much about battery life (but i dont want to completely throw it out the window) since i have an extended battery already.
Also, I am wondering if I will have to wipe my phone to install a new kernel (unless it depends on which one)
Thanks for the help
Click to expand...
Click to collapse
You'll need a Sense Kernel. Lou and Chad have them, and are overclockable. I use Chad's 12/23/2010. He also has AOSP kernels too, so don't download or try to install those in a Sense ROM, as it won't work! Make sure you are downloading the proper Sense kernel.
You'll want to wipe Cache and Dalvik Cache before flashing the kernel zip file.
EDIT: Link to Chad's Incredikernel 12/23/2010 Sense - link
EDIT: Lou's kernel thread link
I've been using Chad's for a while and get pretty good battery life. Unplug at 7:30am, plug in at around 11pm or after that... I'm sitting at usually 50-70% still. That's with data/wifi both off unless I turn them on to use them, on vibrate and light to medium texting throughout the day.
RMarkwald said:
You'll need a Sense Kernel. Lou and Chad have them, and are overclockable. I use Chad's 12/23/2010. He also has AOSP kernels too, so don't download or try to install those in a Sense ROM, as it won't work! Make sure you are downloading the proper Sense kernel.
You'll want to wipe Cache and Dalvik Cache before flashing the kernel zip file.
EDIT: Link to Chad's Incredikernel 12/23/2010 Sense - link
EDIT: Lou's kernel thread link
Click to expand...
Click to collapse
waiting for a kernel for new sense ROMs. not used to running at 998mhz