im tyrin to use openvpn installer on gingerbread i managed to installl the app but i cant install the binary..
It happenned to me too, if u r using coderom, it came with a busybox pre installed.
But still download busybox and reinstall.. it worked for me
thanks for ur help! it worked perfectly!
Related
I've installed 2nd boot on my CM72 and created two additional VFS with the help of Multi Boot Manager (CM9 and CM10).
I'm able to boot into any of them and they work as expected except one thing: there is no way to get Superuser access.
The superuser app is there, it says it is fine but when it tries to update itself it gets a root access error.
Whenever any other app tries to ask for root, their access is denied as well.
The CM72 on Nand works well, root access works as well.
Any ideas?
Thanks
Bro just flash ur stock ROM and root it with super one click then install any other recovery like I use kousch bootstrap recovery its btr than 2ndinit then try to install CM10
Hope this will help u
Sent from my MB525 using xda premium
it's a known issue that in CM9 & CM10 with multiboot the su don't work well, try updating su binary if u switch to one of the virtual machine
Jelly powered.Defy
AnTerNoZ said:
try updating su binary if u switch to one of the virtual machine
Click to expand...
Click to collapse
How can I do that?
I started SU in a virtual machine and it found a newer version. I told it to update itself but it was interrupted saying can't get root rights.
Is there any other way to do it?
Thanks
I think you know by now that multiboot is dead in latest CM10 builds...so thats the end of it for some time now!
aribis said:
I think you know by now that multiboot is dead in latest CM10 builds...so thats the end of it for some time now!
Click to expand...
Click to collapse
multiboot works - apart from the SU access - everything works like charm.
Does anyone have any problems with the busybox installed by wugfresh's utility? I switched out the SuperSU app with Koush's SuperUser app and I noticed that busybox is 0 bytes and none of the commands work. I would like to know if it is an issue with that busybox installer or because I am using a different su. I got it working by using the JRummy busybox installer, but I rather use the Stephen installer.
Additional info: stock rooted 4.4
brianf21 said:
Does anyone have any problems with the busybox installed by wugfresh's utility? I switched out the SuperSU app with Koush's SuperUser app and I noticed that busybox is 0 bytes and none of the commands work. I would like to know if it is an issue with that busybox installer or because I am using a different su. I got it working by using the JRummy busybox installer, but I rather use the Stephen installer.
Additional info: stock rooted 4.4
Click to expand...
Click to collapse
If it doesn't work using the Stephen installer, and you got it working using the JRummy installer, why do you want to use the one that wouldn't work?
JRummy installer uses an older version of busybox, which might be why it's working for you. I believe versions past 1.20 aren't compatible with Android 4.3+
Sent from my Nexus 6 using Tapatalk 4
I was wondering if others were having the same issue with the Stephen installer. If so, we could pass this information to Wugfresh. He might be able to give us an option as to which busybox installer his utility will install on the device. Also, it is just strange that everything installs properly, but the busybox binary is 0 bytes.
Can confirm the issue on a N4 also
Stock 4.4.2 ROM on Nexus 4. With koush's latest superuser, problem is exactly as you describe when busybox is installed via Stephen's utility. Using latest supersu by chainfire, everything is fine. Haven't tried any other installation methods. Someone know what's wrong?
I have trying to install viper4android on my q1010i from past 2 months and have tried every mentioned thing on the vipers forum as well as other threads.
The thing is its showing error- "Driver installation failed, the busybox found on your device doesn't work. this usually means you installed the wrong or broken busybox, V4A needs stericson busybox to work. If you are sure about having installed the proper busybox, then please confirm your device has been properly rooted."
Things i have tried
- Installing both busybox(free from playstore as well as pro)
- Tried unrooting and rerooting the device
- Flashed different versions of supersu
- Tried different versions of V4A
- Tried flashed different versions of V4A
Please help me!!...The thing is V4A works with jb but not working with kk.
I have currently stock kk s002 with exposed framework installed
Cheers... I did it !
nishantgupta107 said:
I have trying to install viper4android on my q1010i from past 2 months and have tried every mentioned thing on the vipers forum as well as other threads.
The thing is its showing error- "Driver installation failed, the busybox found on your device doesn't work. this usually means you installed the wrong or broken busybox, V4A needs stericson busybox to work. If you are sure about having installed the proper busybox, then please confirm your device has been properly rooted."
Things i have tried
- Installing both busybox(free from playstore as well as pro)
- Tried unrooting and rerooting the device
- Flashed different versions of supersu
- Tried different versions of V4A
- Tried flashed different versions of V4A
Please help me!!...The thing is V4A works with jb but not working with kk.
I have currently stock kk s002 with exposed framework installed
Click to expand...
Click to collapse
Suggestion: (Why Don't you update to S009, Its much more smooth!)
My Xolo Q1010i on 4.4.2 is working good with "Viper".
At start even i faced a lot of Problem but at last got a Solution :victory:
Technical Info:
(This problem is there in KK because there is no space left in kitkat System to Put any other file)
So, what u have to do is
1. You should have flashed a Stock 4.4.2 Kitkat Rom which is already SUed(Rooted) / Or root ur Kitkat by flashing custom Recovery and flashing SuperSu after that (google it for further details)
2. You need to delete some system App (To Get some space In System)
*Use Root Explore / ES File Explorer in root mode
To do this, U need to go In System>App> DELETE AN APP {PREFER GOOGLE PLUS(As u can intall it again)}
3. Restart
4. Upate SuperSu Binary(How to ?>Google It)
5.Install Busy Box
6. Enjoy Super Cool Audio Quality
But Viper have An Issue on Kitkat, If you clear viper from Recent... it will stop to work.
And Ya I'm using Multiwindow!
Check Here: ( http://forum.xda-developers.com/q10...ws-android-t3116786/post60931397#post60931397 )
I am stuck with s002 coz i was nt properly able to root s009 (luck patcher and other root app not working)
couldn't find the extra and awesomeness in s009 which was not in s002 so not gonna update.
And i have apprx 73.8mb in my system and i think that's enough for viper.
Also i have already uninstalled most of the system apps(before asking for help).
Other suggestions??
nishantgupta107 said:
I am stuck with s002 coz i was nt properly able to root s009 (luck patcher and other root app not working)
couldn't find the extra and awesomeness in s009 which was not in s002 so not gonna update.
And i have apprx 73.8mb in my system and i think that's enough for viper.
Also i have already uninstalled most of the system apps(before asking for help).
Other suggestions??
Click to expand...
Click to collapse
Notice: None of Rooting App will work for Xolo Q1010i... u need to follow this to do that, else u will always be there with s002!
The Problem is, Your Xolo is not properly Rooted(No proper Su binary Available)! [And simple copy / paste do not work in kitkat]
So, i strongly Recommend You to,
1. Download SU'ed "S009" from here : ( http://forum.xda-developers.com/q1010i/orig-development/rom-stock-xolo-q1010i-rom-one-d-t2883342 )
{You Seriously Need To Flash To Get Root, I Flashed Some 10-12 times to discover how to properly root our Xolo with s009 Kitkat}
2. Flash It With Flashing Tool
3. Follow Instruction What I have given Above properly.
4. I guarantee S009 works on Root poperly n buttery smooth with great battery backup N With Viper ofcourse :laugh:
(And Ya, Reminding Again Flashing The Above SUed Rom is important, after that follow my steps. Else you will never be able to properly Root Your Xolo Q1010i )
And Remember, If Viper works on Mine Xolo with Kitkat S009.... It will work for you, for sure. Just give it a proper Try buddy
ok, i'll try this and will post result after sometime.(having exams)
and do i have to flash latest super su binary also...after flashing pre su'ed s009.
nishantgupta107 said:
ok, i'll try this and will post result after sometime.(having exams)
and do i have to flash latest super su binary also...after flashing pre su'ed s009.
Click to expand...
Click to collapse
Nah, Just update it via play Store.
Then, SuperSu will ask you to update binary itself. Done!(Make Sure u delete some file from system before updating SuperSu)
i have tried on sued s009..nothing happened...still same error...
i don't know what i m doing wrong...
Finally after working whole night i have viper fully working in my kk now..!!!
i m soo happy...
the thing was my os was missing audio_effects.conf which i mistakenly deleted when i uninstalled dsp manager...
Disable "MOUNT SPACE SEPARATION" on Super SU
posting fix I found someone else figured out
nishantgupta107 said:
I am stuck with s002 coz i was nt properly able to root s009 (luck patcher and other root app not working)
couldn't find the extra and awesomeness in s009 which was not in s002 so not gonna update.
And i have apprx 73.8mb in my system and i think that's enough for viper.
Also i have already uninstalled most of the system apps(before asking for help).
Other suggestions??
Click to expand...
Click to collapse
This is what fixed my busybox error with V4A driver install:
"OK all I have a fix for installing Viper on the Tab S.
Use any file explorer and navigate to /system/vendor/etc
Copy the audio_effects.conf in that location
Navigate to /system/etc and paste the file you copied there
Once copied change the permissions to match the other files in the /system/etc folder
Install Viper and it should work this time, apparently the audio.effects.conf file is expected to be in the /system/etc location and is not there by default for some reason....*"
The file was already where it said to copy to, but contents were different. Either way, afterwards opening V4A apk file (without even having to reinstall), it prompted for driver install and did it!
zach
killerBRs said:
Disable "MOUNT SPACE SEPARATION" on Super SU
Click to expand...
Click to collapse
The voice of sanity.
Go into SuperSU. If everything is installed correctly (rooted, supersu, viper, and busybox), this WILL be the proper solution.
killerBRs said:
Disable "MOUNT SPACE SEPARATION" on Super SU
Click to expand...
Click to collapse
:good: it works!:good:
I just got the phone today and the store updated it to 8.1. I have it unlocked and rooted but it crashes when i hit install for busybox. It says free space unavailable for /system/xbin
Delete unused keyboards. Not the Latin one tho...
equlizer said:
I just got the phone today and the store updated it to 8.1. I have it unlocked and rooted but it crashes when i hit install for busybox. It says free space unavailable for /system/xbin
Click to expand...
Click to collapse
If you're using Magisk, just use the Osm0sis BB module. If not try Meefik which supports custom install locations.
Hello everyone,
So I have a question regarding Busybox and Viper4. I'm rooted via magisk and I*'ve attempted to get viper4 via magisk app but have been unsuccessful due to drivers. I've installed busybox via magisk, but I never get the app in the app drawer. So I tried the playstore version but when I downloaded viper4 on magisk then try to download the driver, I get a message telling me to root or install busybox. I I have installed BB in sbin, and xbin, bin but no luck. I keep receiving the same message. Any ideas? I have elementalX kernel.
mzeigler1 said:
Hello everyone,
So I have a question regarding Busybox and Viper4. I'm rooted via magisk and I*'ve attempted to get viper4 via magisk app but have been unsuccessful due to drivers. I've installed busybox via magisk, but I never get the app in the app drawer. So I tried the playstore version but when I downloaded viper4 on magisk then try to download the driver, I get a message telling me to root or install busybox. I I have installed BB in sbin, and xbin, bin but no luck. I keep receiving the same message. Any ideas? I have elementalX kernel.
Click to expand...
Click to collapse
Wrong section mate
Sent from my Pixel 3 using Tapatalk
mzeigler1 said:
Hello everyone,
So I have a question regarding Busybox and Viper4. I'm rooted via magisk and I*'ve attempted to get viper4 via magisk app but have been unsuccessful due to drivers. I've installed busybox via magisk, but I never get the app in the app drawer. So I tried the playstore version but when I downloaded viper4 on magisk then try to download the driver, I get a message telling me to root or install busybox. I I have installed BB in sbin, and xbin, bin but no luck. I keep receiving the same message. Any ideas? I have elementalX kernel.
Click to expand...
Click to collapse
The module doesn't create an application. I install BusyBox for Android NDK and Viper FX with Dolby and Audio Mod Library and I have absolutely no issues
I was missing the audio mod. Thank you for the assistance.