[BUG] Widescreen Video Rec Bug - Defy General

Hi,
Since I am a new member I don't have the rights to post into the DEV forum. Anyways.. I just installed RC1 and I found a bug. Can one of you please paste this into the CM7 thread?
Bug : While shooting a video in widescreen mode the flash does not turn on. Also, while shooting in normal mode the flash does turn on but if you hit back button the flashlight stays on.

Related

No Flash light option when recording a video

Hi,
why is the flash light option switching from photo to video disabled?
Which means: Recording a video there is no falsh light available.
Does this make sen(s)ce? ;-)
Any workaround for this?
br,
Chris
not as far as i know, i even tried turning on the led with a flashlight app then starting video but it disables the light before video starts.
i dont know why.
That's annoying.Any way to record video on Desire using night mode?
-------------------------------------
Sent via the XDA Tapatalk App
It has been announced that 2.2 will support this - "With the LED flash now enabled for the Camcorder, videos can be shot at night or in low light settings."
Link - developer.android.com/sdk/android-2.2-highlights.html
3722 said:
It has been announced that 2.2 will support this - "With the LED flash now enabled for the Camcorder, videos can be shot at night or in low light settings."
Link - developer.android.com/sdk/android-2.2-highlights.html
Click to expand...
Click to collapse
Thanks for your info..looking forward to 2.2!

MIUI Solution: Camera flash not working while recording video for red lens defy

Hi,
This is for MIUI users.I'm having a red lens and my camera flash wasn't working while recording video, though it was working while taking photos.I searched the internet quite a bit and came to know that it was not possible to get it working atleast until a patch is released.I haven't exactly got it working but I do have a solution.
Switch on the torch in toggle or via the torch app and let it run. Now go to your camera start the video recording while the torch is still on.THAT'S IT!!!!!!!!!!!
When you have finished recording your video simply switch OFF the torch.Enjoy!!!!!!!!
I recommend using LGcamera for video recording....With it you can record at much higher resolution i.e. 850*480 and also set the video recording Format

[Q] ARHD v 7.0.0.0 Camera Problems

Hi all,
Just installed Android Revolution HD version 7.0.0.0 and now the camera isn't working properly:
When the photo is taken, there is no "confirmation" with the small animation that shows the picture zooming out in the corner.
When you try to watch videos the phone reboots or / video does not appear in the camera folder list.
I tried installing the stock version again, but the camera problems are still there. Could this be because of an edited Camera.apk file? Could it be one of the tweaks in the installation screen? (writeback , etc) ? I also installed again without the tweaks but the problems are still there.
I now installed Android_Revolution_HD-One_X_7.1.0 and the camera seems to work better but when I have low battery neither the camera or the video work, the buttons are disabled and it takes no pictures. Is this a tweak or a bug?
Any help very appreciated.
Probably best to ask the questioning the ARHD thread
Thanks, I would, but you are not allowed to post in the HTC development forum. Is there some specific thread on the ARHD in some other section of the forum?

[Q] JellyTime 4.2 R11 - Video mode focus not working?

Dear XDA members,
After a month of struggling with this problem (since I use the camera quite a lot) I'm looking for a way to solve it. I must say I did a search before opening this thread and asking this question.
Device: HD Desire HD
ROM: JellyTime 4.2 R11
So the problem in short:
When I switch the camera to video recording mode, the focus function simply disappears. No autofocus, no 'touch to focus'...So I always need to go back to photo mode, focus where I want then switch back to video mode...It's very annoying. How can I fix it?
(I wanted to post this question to the corresponding JellyTime thread, but it requires 10 posts so I had to do it here)
Thanks very much in advance!

[Q&A] ★ ☆ [ROM][4.4.4] NuSenseSIX-ART Edition | 3.28.401.6 | v1.00 [10-15-14]

[Q&A] ★ ☆ [ROM][4.4.4] NuSenseSIX-ART Edition | 3.28.401.6 | v1.00 [10-15-14]
Q&A for ★ ☆ [ROM][4.4.4] NuSenseSIX-ART Edition | 3.28.401.6 | v1.00 [10-15-14]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
So I've been using this since released and it is an amazing rom, lovin it.
2 questions about the new camera though. I have seen a video where in split capture both front and rear record simultaneously, however it seems to only work capturing rear camera and then after capturing front camera. Is the M7 not capable of the simultaneous capture? Also does the M7 not support the Full Hd (1920x1080) resolution for videos? When attempting to record it looks very sharp and crisp but when playing the recording back i get blotched colors and a thick green and purple line on the right side of the video.
ayanami00 said:
So I've been using this since released and it is an amazing rom, lovin it.
2 questions about the new camera though. I have seen a video where in split capture both front and rear record simultaneously, however it seems to only work capturing rear camera and then after capturing front camera. Is the M7 not capable of the simultaneous capture? Also does the M7 not support the Full Hd (1920x1080) resolution for videos? When attempting to record it looks very sharp and crisp but when playing the recording back i get blotched colors and a thick green and purple line on the right side of the video.
Click to expand...
Click to collapse
The m7 does not have native dual capture like the m8 does.
In regular camera before Eye experience, it is able to capture image from both, with a PictureInPicture looking window for front camera.
At one point, I attempted to try and enable dual capture for the m7, but did not have much luck and did not try for long.
It's possible that it could be enabled, but I have yet to do so.
Most of that would be done kernel side and I do believe it can be done.
But HTC never gave us that ability on the m7.
So yeah, to use dual capture/split view, it takes one and then the other.
As far as the video, yes it does HD.
I have yet to do a lot of video with the Eye camera, but I did not notice anything like that in my testing.
You may actually be one of the many who have an inferior sensor, as many have had to send theirs in for repair/replacement for similar issues.
It may just be that the newer camera stresses it more, making it more apparent.
I assume you are in fact on the latest firmware, so that shouldn't be a concern.
If others are having similar effects, then it could be a result of porting the libs and binaries for the new features from the m8.
But if it's just happening for you, or a select few, then I would lean towards the hardware failure that HTC is aware of.
Thanks for the info, after posting this i messed around with the settings for the video issue. This is what I came across, if I set video quality to 1920x1080 via settings and shoot video on auto i get what I described in my post. If I change from auto and shoot in hdr I do not get the blothchy color or lines but image seems to be zoomed in a little.
Now when i set video quality to 1280x720 via settings and shoot video on auto no image issues. If I change from auto to hdr still using 1280x720 in the settings i get a 1920x1080 video that looks like it should not zoomed in either.
Seems odd but got it working. So would this be a hardware issue like you suggested or issue with the app, seeing it was meant for the M8?
Thanks again for sharing your work !
Camera Issue
First off Santod, been using your ROMS for quite a while now and have greatly appreciated your hard work. I have just one problem with this new one, as I see someone has already stated, I too am having an issue with my camera during recording. It looks fine on the screen while recording, but after recording i go to look at the video, and it's almost as if the split picture is active, but only for the back camera. What I mean is that there appears to be a line cutting the screen into two sections (like the split picture does, but it's still the whole screen video from the back camera) and the colors are off, almost as if it has the negative filter on but not quite. I have not had any issue with the camera previous to installing this new ROM. There is also a green line that shows up on the top of the video, on all the videos i have taken. Im not entirely sure that it isn't a software issue as I haven't had any trouble on previous roms, but I'm sure you know a lot more about it than I do. I'm about to reflash the ROM and see if that doesn't maybe fix it, but I figured I would let you know of the only problem I have encountered so far. Thanks again for all your work!
---------- Post added at 04:32 PM ---------- Previous post was at 04:21 PM ----------
ayanami00 said:
Thanks for the info, after posting this i messed around with the settings for the video issue. This is what I came across, if I set video quality to 1920x1080 via settings and shoot video on auto i get what I described in my post. If I change from auto and shoot in hdr I do not get the blothchy color or lines but image seems to be zoomed in a little.
Now when i set video quality to 1280x720 via settings and shoot video on auto no image issues. If I change from auto to hdr still using 1280x720 in the settings i get a 1920x1080 video that looks like it should not zoomed in either.
Seems odd but got it working. So would this be a hardware issue like you suggested or issue with the app, seeing it was meant for the M8?
Thanks again for sharing your work !
Click to expand...
Click to collapse
I tried this also, and it had the exact same effect for me. I wish I would have seen this yesterday as I recorded a whole show last night with messed up video and didn't even know it lol. Thanks for this, I guess I will use this as a workaround for now.
---------- Post added at 04:45 PM ---------- Previous post was at 04:32 PM ----------
Upon closer inspection when i played back the video on my computer, the video is actually two of the same videos playing next to each other, not a whole video cut in half by a line.
some bug, need fix
Before, i really Thanks You cuz best series Rom for M7 VWZ.
Yesterday, i up this Rom for my M7 VWZ, but have some bug ...
I'm from Vietnam and use GSM Sim, i'm up from NuSence 4.4.3 and have some bug....
1> Only Call success at first call, then need restart for other call.
2> have icon Sim Notsupport in status bar,
i was reup many times but it's still that, now, i;m go back NS 4.4.3
P/s: Can you port "Ufocus" on M8 for M7 VWZ ?
I don't have any reboot options on my power menu. The only options I see are "Power off" and "Airplane mode". I also can't find any options for changing this, either in the installer or in Settings. Is there a way to fix this without doing a full wipe?
If it makes any difference, I originally installed this ROM using a full wipe with Nova Launcher selected, then later re-installed without wipe to change the launcher to Blinkfeed (but the reboot option has never appeared with either launcher).
Issues with Chromecast
Hey Santod,
I have been trying to mirror my screen with the chromecast app. as it connects it then disconnects and never actually works. I had it working on your older Nusense Six 8.0. Just wondering if this is something you can work on or if this is something I will just have to wait until the next iteration of builds.
Thanks,
Kevin Clark
Casting screen with Chromecast
Does anyone else have issues casting your screen with Chromecast? I tried, and it immediately ends the cast, leaving my TV at a black screen.
Thanka
nullx said:
Does anyone else have issues casting your screen with Chromecast? I tried, and it immediately ends the cast, leaving my TV at a black screen.
Thanka
Click to expand...
Click to collapse
I can also confirm that screen casting my screen no longer works as it did in the previous NuSense. So far this only appears to be an issue with Mirroring. Casting from apps like Youtube and Netflix work fine for me.
http://imgur.com/a/dfgUm
My battery life with this rom has been insane. I'd be at thirty percent after ten hours on gpe and dirty unicorns and the dalvik version of nusense.
Thanks for making a great rom, looking forward to Chromecast screen mirroring.
So I can't get ART to stick. Every time i switch to it and reboot it doesnt change. I am using xposed modules if that makes a difference
epst programming works?
xxtsxx said:
So I can't get ART to stick. Every time i switch to it and reboot it doesnt change. I am using xposed modules if that makes a difference
Click to expand...
Click to collapse
You can't use art with xposed, it doesn't support art yet.
dmytropolyuk said:
epst programming works?
Click to expand...
Click to collapse
Yes, Epst works.
santod040 said:
You can't use art with xposed, it doesn't support art yet.
Click to expand...
Click to collapse
ahh okay that was my suspicion. Thanks for the great work
In having an issue with Bluetooth audio
I can pair my head set but it won't pass any audio
Any ideas?
Anyone else having issues with GPS / Google Maps on this ROM?
Was this version supposed to not have the Sense toolbox installed with it? I'm not sure how else to enable the swipe-typing otherwise...?
Issues switching to ART
Hey Santod,
I haven't gotten any reply from you about the chromecast issue. I understand. You are a great developer. I did have a quick question about ART though. I tried to switch my Phone to ART, but it didn't actually switch over when I told it to reboot to switch to ART. What am I doing wrong?
Supperman2006 said:
Hey Santod,
I haven't gotten any reply from you about the chromecast issue. I understand. You are a great developer. I did have a quick question about ART though. I tried to switch my Phone to ART, but it didn't actually switch over when I told it to reboot to switch to ART. What am I doing wrong?
Click to expand...
Click to collapse
Currently I have a broken arm, so my presence and ability to type are somewhat effected.
i dont use Chromecast so cant help too much there.
i know I saw info online about it and how you have to access it differently then what seemed obvious.
As for Art, Xposed is not Art compatible and will auto revert you to dalvik if enabled.
So you have to choose one or the other, which is why I left Xposed out of this build.

Categories

Resources