Develop Bugs

X-VzW-MDN

Is there any reason that the reg. When sending a message does not see the correct number is in place?Or is there away to make the reg point that it is there?Thank You

My phone acts like the X-VzW-MDN is not even entered.I have been fighting this for days now.Reflashing roms and hard rest,following any tut I can find.I dunno what the deal is.I have even tried installing other Acrosoft builds.All my settings under WspHeader are correct.Have my mms options all correct.I am lost even if I flash a factory VZ rom still same error.I called them got new A-Key made sure my phone account was right talked to 3 techs or what VZ calls techs.This Originator Address error is pissing me off lol.I even went as far as to clear the NV ram and restore it from a old one I had,That I know mms worked on.Something seems werid.Any ideas would be nice I posted a thread on it here.
http://forum.xda-developers.com/showthread.php?t=541438
I was going to flash back to V12 but lost the rom boooo.LOL thanks for any help.BTW everything else works but mms.I dunno about gps I never use it anyway.
I have a sprint 6900 running V13 with radio 3.37 on Verizon
Sorry if people think this is a double post but I thought it might need its own thread.

I'm assuming you're trying to make your MMS's work? Assuming you are I have followed these instructions with success on the last several ROM flashes including NFSFAN Win6.5 V13. I have attached the Arcsoft cab that I used after having some problems with the one posted in the NFSFAN 6.5 thread. It could have been user error when I tried NFSFAN's Arcsoft cab, but I figure another option couldn't hurt.
MMS
1. Go to connection settings and select "Manage existing connections"
2. edit the only connection there
3. Name it whatever you want ie "vzw"
4. hit next and enter #777 as the number
5. hit next and put "[email protected]"
and "vzw" as the password
6. hit finish
7. install the attached arcsoft cab
8. do a soft reset.
9. open phmregedit in the start menu
10. navigate to HKLM\Software\Arcsoft\ArcsoftMMS UA\Config\mm1\WspHeader\X-VzW-MDN
and put your 10 digit phone number for the value
11. wait a min or two and do a soft reset
12. go into messaging select menu and then mms options
13. select the server tab
14. select verizon wireless and change connect via to "the internet",
the other settings should be correct.
15. wait a few min and perform a soft reset once more
16. now mms should work!!!
Every time I've done this procedure my phone number has already been in the X-VzW-MDN spot, but I have always reentered it just because. Also remember to wait a couple minutes before soft resetting after that step.
Edit: I just read your post in the 6.5 thread, this is the solution to your problem. Make sure you uninstall any previous Arcsoft cabs first, then soft reset and THEN follow these directions to the "T".

I have tried that over and over not tring to be rude.LOL I do not think its something I am doing but a stuck reg or something I dunno.Thank you tho I will try it again

OK so I bought a sprint 6900 off a friend switched a vaild esn to it.I have VZW service mms has worked until I flash V13 to it.I called VZW to make sure my account was provisioned right.and get a new A-Key after fighting this error for a few days.I have flashed I dunno how many roms and tried I dunno how many fixes and tuts.I have tried every cab for Acrsoft you can name.I know all info on the phone is correct due to the fact I have entered it in my sleep lol.I erased my NV ram and reinstalled it from a date I know my mms was working.My X-VzW-MDN is correct and connection setting is correct.I wondering if VZW has done something on there end to stop mms on there end after the fact which I dought.When my phone goes to send a mms the icon pops up and flashes a few times and then I get the error.I dunno what else to try being that I have reflashed a factory rom and cleared the NV ram a few time now.My latest setting are V13 on VZW with GC arsoft and followed the Cody bear tut to a T.Still nothing same ol error.My net works just fine and my settings for mms are right and my X-VzW-MDN are there.I am wondering if my phone is not picking u that it has the right phone number in the area.I have no clue as to what to try now.I thank everyone for the help.I am thinking about switching to a toucj pro so if anyone can pm me the full exe for cdma 3.0 or higher that would be great.

these phones suck, my mms will not work for the life of me, switching phones is your best bet these phones are headaches and they really are garbage

Gotroot said:
OK so I bought a sprint 6900 off a friend switched a vaild esn to it.I have VZW service mms has worked until I flash V13 to it.I called VZW to make sure my account was provisioned right.and get a new A-Key after fighting this error for a few days.I have flashed I dunno how many roms and tried I dunno how many fixes and tuts.I have tried every cab for Acrsoft you can name.I know all info on the phone is correct due to the fact I have entered it in my sleep lol.I erased my NV ram and reinstalled it from a date I know my mms was working.My X-VzW-MDN is correct and connection setting is correct.I wondering if VZW has done something on there end to stop mms on there end after the fact which I dought.When my phone goes to send a mms the icon pops up and flashes a few times and then I get the error.I dunno what else to try being that I have reflashed a factory rom and cleared the NV ram a few time now.My latest setting are V13 on VZW with GC arsoft and followed the Cody bear tut to a T.Still nothing same ol error.My net works just fine and my settings for mms are right and my X-VzW-MDN are there.I am wondering if my phone is not picking u that it has the right phone number in the area.I have no clue as to what to try now.I thank everyone for the help.I am thinking about switching to a toucj pro so if anyone can pm me the full exe for cdma 3.0 or higher that would be great.
Click to expand...
Click to collapse
That happen to me too, i could the not X-Vzw-MDN but what i found out that one of the arcsoft cabs has it and one does not so i switch from one cab to the other and the other and walla! i found it.Try getting a diff arcsoft cab.

I've also had to reinstall the same GC arcsoft twice to get the X-VZW-MDN to even show up.

it will not show up unless you wait a couple mins after installing and soft reset

i've never had a problem using the directions provided above. always sets MMS up properly.

Unfortunately, the process com.android.phone has stopped

HI,
I'm having this error message on boot and I can't find a solution. Every search I've made for this error comes up empty. The final solution being restore to factory. After doing that and trying to reinstall the rom I get the same error. Phone FC and i don't get time synched from the network anymore.
I'm not using TB. I'm not restoring any data. This is on a fresh clean install of the rom.
Any ideas? I need help!

What did you flash in terms or rom, mods, themes, and how did you flash?
Sent from my Galaxy SII T-mobile using Tapatalk 2

I flashed the new Darkside rom with the TMO base. I'm starting to think that the new base is conflicting with my sim card... I'm not sure what to do about it... I'm with Virgin Mobile in Canada if that makes any difference...
No mods and no themes. Its just on first boot. Any other base seems to work fine. But since the TMO base I get that FC.

Could be a bad download, unlikely but if you haven't tried yet re-download the ROM

I've redownloaded multiple times and checked the md5... so the dl itself is fine... the install is fine... but once it connects to the network com.android.phone force closes... Do you know how to reset the network settings on the sim card itself?

process com.android phone has stopped
Hi,
My HTC One XL from Rogers is doing this when the address book syncs in the car. I have it de-bloated, rooted, and unlocked boot loader. My problem is that nothing seems to have changed. The phone works (Bluetooth )in the car until the address book is synched (or so it seems), then it cuts out. What to do?

Same problem with my ROM. I am using Reliance GSM in India. I tried with Vodafone & Airtel SIM and the phone works perfectly normal. Tried with my Dad's Reliance GSM and the problem is back. Dunno what the problem is exactly. Other ROMs work perfectly fine with Reliance in my cell. Problem is only with this one ROM. Incase you stumble upon a solution, pl do let me know as well.

My Original ROM with the same error
Hello everyone
My phone is Samsung S3, with original software, it asked me to update the system and i agreed after that i found it add some information such as it;s from United Emirates but i live in kuwait, and now i have the same error only when i try to make international call.
please any help without reset the phone?!!!

On some ROMs, they say it has something to do with the DPI
I've encountered this problem on AOKP 07/09 Milestone 6, and from searching in the forums, all I could gather is that it has something to do with my DPI settings.
On 07/05 it was okay, I just don't get it why flashing to 07/09 made this error appear.
UPDATE Now I discovered that turning the phone into Airplane mode removes this error. But then if you deactivate airplane mode again it comes back.

msanl said:
Hello everyone
My phone is Samsung S3, with original software, it asked me to update the system and i agreed after that i found it add some information such as it;s from United Emirates but i live in kuwait, and now i have the same error only when i try to make international call.
please any help without reset the phone?!!!
Click to expand...
Click to collapse
Why dont you post in the S3 forum?

[Q] Problem with Radio. URGENT

After flashing the newest Paranoid Android and running for a few days I suddenly lost data. My phone states that my phone is roaming, so I tried turning data on and off and switching on airplane mode and then I settled on switching back to the ROM I was previously on, the latest MIUI and to my dismay saw that the same issue was occurring. So now my phone has no data on every rom I try and I dont know how to remedy this. If anyone has the same issue or anything to say that might help it would greatly appreciated. I still have 4 months to go on my contract and no money for Verizon's ETF or a replacement phone.
Sent from my HTC Incredible 2 using xda app-developers app

savtitan29 said:
After flashing the newest Paranoid Android and running for a few days I suddenly lost data. My phone states that my phone is roaming, so I tried turning data on and off and switching on airplane mode and then I settled on switching back to the ROM I was previously on, the latest MIUI and to my dismay saw that the same issue was occurring. So now my phone has no data on every rom I try and I dont know how to remedy this. If anyone has the same issue or anything to say that might help it would greatly appreciated. I still have 4 months to go on my contract and no money for Verizon's ETF or a replacement phone.
Sent from my HTC Incredible 2 using xda app-developers app
Click to expand...
Click to collapse
Have you tried re-installing your PRL? Call *228 and press send, use option 2. That'll re-load the preferred roaming list.

What recovery are you using (CWM or TWRP - and ver. #) and is your DI2 S-Off ? Please post your current Bootloader information (HBoot) and whether you have Backups for your (previous) Roms on your mSD card?
Assuming that your device can still making voice calls (SMS ??) - does it work over WiFi ? And, you have already done *228 option 1 - as it sometimes help reset it?
It is sometimes necessary to call VZW and speak to tech support for smartphone and they need to reset things and power cycle your device while you are on the line with them on a different phone to get you out of roaming, depending on the "radio" that your device is now. Hopefully, you did not somehow flashed the leaked non-VZW radio/kernel from China Telecom.
Before calling VZW, it would be helpful if you can flash a Sense-based ROM, either one of the stock zip file or Andybone's tweaked Sense Rom based on OTA, or the SkyRaider's Zeus v1.3 Sense Rom - and, if your phone was Sim-unlocked, can you check to see if it will work in GSM mode for voice & data (borrow a known-working AT&T or T-Mobile Sim card) Remember to do a Master Reset, wipe dalvik/cache & system before flashing a different Rom.
And, you should read up the sticky posts written here about restoring the device back to stock - just in case. The steps are slow & delicate, but it can be done - relax & don't panic.

I cannot make the call because I have no data
Sent from my HTC Incredible 2 using xda app-developers app

Letitride said:
What recovery are you using (CWM or TWRP - and ver. #) and is your DI2 S-Off ? Please post your current Bootloader information (HBoot) and whether you have Backups for your (previous) Roms on your mSD card?
Assuming that your device can still making voice calls (SMS ??) - does it work over WiFi ? And, you have already done *228 option 1 - as it sometimes help reset it?
It is sometimes necessary to call VZW and speak to tech support for smartphone and they need to reset things and power cycle your device while you are on the line with them on a different phone to get you out of roaming, depending on the "radio" that your device is now. Hopefully, you did not somehow flashed the leaked non-VZW radio/kernel from China Telecom.
Before calling VZW, it would be helpful if you can flash a Sense-based ROM, either one of the stock zip file or Andybone's tweaked Sense Rom based on OTA, or the SkyRaider's Zeus v1.3 Sense Rom - and, if your phone was Sim-unlocked, can you check to see if it will work in GSM mode for voice & data (borrow a known-working AT&T or T-Mobile Sim card) Remember to do a Master Reset, wipe dalvik/cache & system before flashing a different Rom.
And, you should read up the sticky posts written here about restoring the device back to stock - just in case. The steps are slow & delicate, but it can be done - relax & don't panic.
Click to expand...
Click to collapse
I have done multiple AntiVenom wipes to no avail, and only WiFi is working for me. I have not yet attempted to flash an older sense based Rom so I will try that. My only question is can VZW access and get my phone out of permanent roaming with my phone having no data or 2G?
P.S. - I did not flash the Chinese radio/kernel. Just checked
Sent from my HTC Incredible 2 using xda app-developers app

savtitan29 said:
I have done multiple AntiVenom wipes to no avail, and only WiFi is working for me. I have not yet attempted to flash an older sense based Rom so I will try that. My only question is can VZW access and get my phone out of permanent roaming with my phone having no data or 2G? P.S. - I did not flash the Chinese radio/kernel. Just checked
Click to expand...
Click to collapse
I see, I've seen DI2 in similar situations but usually, VZW tech support can do some resetting of the stored info on their database to try to restore it, and the best way to make that easier is to restore/go back to a near/pure Sense-based ROM. Once you do that, and you are prompted to "activate your phone OTA" - try to make a call - if you can dail out but the call cannot go thru, you should hear an automated voice msg. that there is error processing your call, ask you to hang up, power down & restart - and try again after waiting 5 to 10 minutes. The msg. will ask you to call # **** - make sure you can call from a home/office/different wireless number as they will go thru the troubleshooting & power cycle/reset process - should take 10 or 15 minutes, and will have you make a test call & verify connectivity success at the end. Informed them that you've done a Master Reset. (FYI - This involved updating, re-generating the good old "A" security key(s) used to identify the phone and the ESN/MEID stored for each device - somehow, the flashing of some Roms & wipe/reset totally dumped clean all of that info, and it needed to be re-established. )
The next step is to re-flash a Sense-based Rom that's stock or close to it -
savtitan29 said:
I cannot make the call because I have no data
Click to expand...
Click to collapse
From the device's Settings - About Phone - look for your radio's info - is it .0312 or .0320 (ICS-based) or an older radio like 0.1111 - after you flashed the Sense Rom, please check it again, and if you could - follow the Sticky's to get the 0.312 radio or even the 0.1111 radio in a Zip file, copy/move to mSD card, restart into Bootloader & flash it - restart and see if it can make calls/use data. If not, VZW tech support is your best friend to reset those Android handshaking of the security keys as stored on their database ...

Letitride said:
I see, I've seen DI2 in similar situations but usually, VZW tech support can do some resetting of the stored info on their database to try to restore it, and the best way to make that easier is to restore/go back to a near/pure Sense-based ROM. Once you do that, and you are prompted to "activate your phone OTA" - try to make a call - if you can dail out but the call cannot go thru, you should hear an automated voice msg. that there is error processing your call, ask you to hang up, power down & restart - and try again after waiting 5 to 10 minutes. The msg. will ask you to call # **** - make sure you can call from a home/office/different wireless number as they will go thru the troubleshooting & power cycle/reset process - should take 10 or 15 minutes, and will have you make a test call & verify connectivity success at the end. Informed them that you've done a Master Reset. (FYI - This involved updating, re-generating the good old "A" security key(s) used to identify the phone and the ESN/MEID stored for each device - somehow, the flashing of some Roms & wipe/reset totally dumped clean all of that info, and it needed to be re-established. )
The next step is to re-flash a Sense-based Rom that's stock or close to it -
From the device's Settings - About Phone - look for your radio's info - is it .0312 or .0320 (ICS-based) or an older radio like 0.1111 - after you flashed the Sense Rom, please check it again, and if you could - follow the Sticky's to get the 0.312 radio or even the 0.1111 radio in a Zip file, copy/move to mSD card, restart into Bootloader & flash it - restart and see if it can make calls/use data. If not, VZW tech support is your best friend to reset those Android handshaking of the security keys as stored on their database ...
Click to expand...
Click to collapse
I will be doing all of these as soon as I get home from school. Thank you for all your help so far

Try dialing some of the *228 variants such as *22801, *22802, and so on. I had a similar issue where the radio got all messed up. Verizon store was so close to selling me a new phone, but when I made this suggestion the sales guy tried it and it cleared up my issue. My prl I think was totally hosed and needed to be reprogrammed ota.
Sent from my ADR6350 using Tapatalk 2

Letitride said:
I see, I've seen DI2 in similar situations but usually, VZW tech support can do some resetting of the stored info on their database to try to restore it, and the best way to make that easier is to restore/go back to a near/pure Sense-based ROM. Once you do that, and you are prompted to "activate your phone OTA" - try to make a call - if you can dail out but the call cannot go thru, you should hear an automated voice msg. that there is error processing your call, ask you to hang up, power down & restart - and try again after waiting 5 to 10 minutes. The msg. will ask you to call # **** - make sure you can call from a home/office/different wireless number as they will go thru the troubleshooting & power cycle/reset process - should take 10 or 15 minutes, and will have you make a test call & verify connectivity success at the end. Informed them that you've done a Master Reset. (FYI - This involved updating, re-generating the good old "A" security key(s) used to identify the phone and the ESN/MEID stored for each device - somehow, the flashing of some Roms & wipe/reset totally dumped clean all of that info, and it needed to be re-established. )
The next step is to re-flash a Sense-based Rom that's stock or close to it -
From the device's Settings - About Phone - look for your radio's info - is it .0312 or .0320 (ICS-based) or an older radio like 0.1111 - after you flashed the Sense Rom, please check it again, and if you could - follow the Sticky's to get the 0.312 radio or even the 0.1111 radio in a Zip file, copy/move to mSD card, restart into Bootloader & flash it - restart and see if it can make calls/use data. If not, VZW tech support is your best friend to reset those Android handshaking of the security keys as stored on their database ...
Click to expand...
Click to collapse
So I have moved back to stock Sense 2.3.3 with S-ON and there is still no working connection. At this point would I call VZW? and since i cannot call from my cell phone would i still call the *228 number or not? Is it possible for them to access my phone when it cannot connect?

savtitan29 said:
So I have moved back to stock Sense 2.3.3 with S-ON and there is still no working connection. At this point would I call VZW? and since i cannot call from my cell phone would i still call the *228 number or not? Is it possible for them to access my phone when it cannot connect?
Click to expand...
Click to collapse
Hmm, still no luck at all. Yeah, dial *228 first and does it dial out at all, or do you get any recorded msg. or nothing happened at all? Make a note of it - then, call VZW from another line (800) 922-0204, Monday-Sunday 6am-11pm - you want to reach smartphone / tech support - tell them you have the HTC DI2 and you are a customer. They will verify your personal info and then proceed to the next steps - and, try to find a way to communicate and/or re-establish communication with your device OTA. Make sure your device is at least 75% charged and at a good 3G signal area, and it's helpful to let them know that other VZW devices at the same physical location have coverage & working signal.
Let's see them go about resetting the system, etc. ...

[Q] HTC Desire will not find network without searching or save APN

Hi Guys.
I have searched for this issue but cannot find anything specific to my case.
I have a rooted HTC Desire running InsertCoin and recently changed my phone network (new SIM) to Sure a relativity new phone network in Jersey (Cable and Wireless). When the SIM was first put in the phone connected to network but would not send SMS (error straight away). I checked the APN list and this was blank. I got the APN settings from the website and tried to add these (getting warning cannot detect SIM) but it would not save.
SIM works fine in Galaxy Nexus Stock 4.3 and S3 using CM11 - cannot to network and APNs visible + text/data works.
So I installed CM7 and CM10.1 and with these the phone would not connect to the network at first. However when I do in to search for networks a couple of times it finds SURE and connects. Adding APN gives no error messages but this will not save. Using APN tools from play store they say "You SIM card cannot be used" Sim state "UNKNOWN" + cannot detect operator code etc so it seems to be an issue reading some of the SIM. But when connected to network I can make calls and receive texts. I have tried messing with the GSM only, auto WCDMA settings in phone information and makes no difference.
I am on baseband 5.11.05.27.
Any ideas what could be causing these issues? I really think its an issue with the phone reading 'some' data from the SIM. The phone shop said we do sometimes have these issues with older phones and i should change my phone
Any help appreciated!
Bridgstfer

BUMP as I really need help - cannot send SMS or get data
Any ideas - should i try different radio?

Firstly upgrade radio to the latest one, as the one you have is not the latest. Secondly, try latest evervolv nightly, as it is based on kitkat and maybe it will help. Try these and post results.
Tapatalked from tablet

kostelo said:
Firstly upgrade radio to the latest one, as the one you have is not the latest. Secondly, try latest evervolv nightly, as it is based on kitkat and maybe it will help. Try these and post results.
Tapatalked from tablet
Click to expand...
Click to collapse
Hi there,
Thanks for these suggestions - it has taken me a while because of USB driver issues but I have finally flashed the latest Radio 5.17.05.23 with a Stock HTC ROM and this did not make any difference - still says No SIM card when opening APNs. Then flashed to latest Evervolv 4.4 and just like CM before it will not let me save APNs and actually says 'No SIM card - C&W" on the lock screen.
Any other ideas - really seems like the phone cannot read the SIM properly. Works fine with other SIMs and the SIM works fine in other phones. Have 2 x HTC desires and same issue so must be problem with this model?!
Thanks
Bridgstfer

No other thoughts guys? Is this just a weird one where the HTC is too old?

[Q] Cannot call or receive calls, but can text and use 4G

Ok so I did a ton of stuff to my phone like rooting, flashing different ROMS, but in the end I want to get my phone back to stock, so I flashed the stock firmware with LG Flash Tool but now I can't call anyone and incoming comes don't come through. I just get a "out of service area" after a while whenever I try calling someone. Texting works and internet works, and so does Wifi. Also, my time is 3 hours fast when it's set to automatic in the settings. I don't know why it's doing this. And my IMEI is 0. Here are some pictures of my settings. One more thing. Since I flashed the stock, in my android devices, Google doesn't recognize my old device anymore. It treats this phone like a new device now. Weird... Anyone know how I can fix this problem?
Oh and when I try to update my phone it gives me this: "Your phone is not registered yet"
So many problems, I'm so sad
(these are the images uploaded online if the attachments don't work)
postimg (DOT) org/image/yc356c9el/
postimg (DOT) org/image/ipnwgre97/

Do you have a EFS backup? Your IMEI is 00000000000000.... That's NOT the way it should be. Maybe the network provider blocks you from using the network because of an invalid IMEI (don't know for sure) but since you reflashed Stock ROM i don't think it's modem related...

I think I fixed it! I just used the kdz method of going back to stock instead of the tot/dll method and it fixed my problems! I got it from this thread if anyone else has the same problem:
http://forum.xda-developers.com/verizon-lg-g3/general/guide-flash-to-stock-10b-kdz-method-t2928140