I have looked everywhere and can not find an answer to my issue.
Boot in HBoot and shows the following info
----AlphaRev-------
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010, 17:52:10
Select recovery and boots into ClockworkMod Recovery v2.5.0.7
This is where my problem is, I have the ROM I want to flash on the SD card but if I select any option from the ClockworkMod menu the screen just goes blank (black) and nothing happens.
If I press the power button again it just comes back to the menu.
Can someone advise if there is a different recovery img I could use or what is going wrong.
Thanks
Mark
Think this is a second post about this tonight. Are you using the volume keys instead of the trackball?
Swyped...
Yes I am and then the power to select, guessing it should be the trackball.
I switched to RA and saw that it worked using the trackball so got it working that way. Spent hours on this and it was just a click away.
Just got it running and just installing my new rom.
Thanks for the advise perhaps whoever created the noob guide should state that the rom managers use the trackball as you enter the bootloader using volume and power button.
Related
Howdy Guys
A few days ago a mate of mine employed me to help him root his new toy. After doing mine multiple times (for various reasons) it was supposed to a piece of cake.
My method (I may have missed a point or two but you get the main idea):
1. Unrevoked
2. Install Titanium Backup, full backup
3. Copy entire SD contents
4. Install Rom Manager / Partition SD Card
5. Copy rom over to SD Card and install
6. Upgrade radio
7. From rom restore stuffs and go nuts
(optional but wanted to do)
8. S-OFF via bootable USB stick
Anyway turns out almost every step of the way was hampered because of new hardware. Here's the HBoot screen details:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010,17:52:18
For anyone else that has a desire with these specs please save yourself a lot of time and "oh ****" moments and know the following:
- Clockwork recovery will not work, you need to flash ArmonRa via the SDK with fastboot.exe OR via Unrevoked, before plugging in your phone go File > Choose alternate recovery and link it to AmonRa which you downloaded.
- Rom manager will not work (as it relies on ClockworkRecovery)
- SD Card partitioning and Upgrading to EXT3 needs to be done in AmonRa Recovery.
- Current S-OFF methods will not work and will send black lines across your HTC Boot splash screen. S-OFF tool reports failure at step 3. Ripping the battery and then restoring via recovery is the only fix.
Cheers.
I have a pvt4 and use clockwork
Sent from my HTC Desire using XDA App
phonoflux said:
Howdy Guys
A few days ago a mate of mine employed me to help him root his new toy. After doing mine multiple times (for various reasons) it was supposed to a piece of cake.
My method (I may have missed a point or two but you get the main idea):
1. Unrevoked
2. Install Titanium Backup, full backup
3. Copy entire SD contents
4. Install Rom Manager / Partition SD Card
5. Copy rom over to SD Card and install
6. Upgrade radio
7. From rom restore stuffs and go nuts
(optional but wanted to do)
8. S-OFF via bootable USB stick
Anyway turns out almost every step of the way was hampered because of new hardware. Here's the HBoot screen details:
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010,17:52:18
For anyone else that has a desire with these specs please save yourself a lot of time and "oh ****" moments and know the following:
- Clockwork recovery will not work, you need to flash ArmonRa via the SDK with fastboot.exe OR via Unrevoked, before plugging in your phone go File > Choose alternate recovery and link it to AmonRa which you downloaded.
- Rom manager will not work (as it relies on ClockworkRecovery)
- SD Card partitioning and Upgrading to EXT3 needs to be done in AmonRa Recovery.
- Current S-OFF methods will not work and will send black lines across your HTC Boot splash screen. S-OFF tool reports failure at step 3. Ripping the battery and then restoring via recovery is the only fix.
Cheers.
Click to expand...
Click to collapse
Sounds bad...But it should not take much time till there is a working solution for this
i have that type of desire.
and i have encounter no problem on rooting unrevoked /s-off with alphaville 1.5
i have used various roms (auraXsense and hd roms Rcmix, ownhere dhd)
used amonra and clockmodwork....at least 30 times
i have used 3,4 radio versions and upgraded to the latest 5.11.05.27
everything works and stable with richard v5f kernel and rcmix 14 + set cpu....
and they are working.
it is exactly your specification
except that now mine is S-off.
spec seems the same except
Bravo Pvt3 ship S-off but maybe is from the s-off procedure
Aug 102010 17:52:18
microp 051d
really i do not know if it was before pvt4 or what pvt3/4 means...
anyway i want to know considering maybe i will encounter future desire and maybe you are right... and it is possible that they are not working.
you cold try a Ruu update and try again the all process maybe something went wrong somewhere
You not seen the rather LARGE thread in General about this??
I have the same specs on my Desire and the latest clockwork(2.5.1.2) works. I'm not S-Off.
I flashed 6-7 roms with no problems.
I didn't use RomManager,so I don't know, but partitioned the sd card from recovery, under advanced options with no problems.
Only happens on some PVT4 devices (two different types), and there is already a thread about this.
My PVT4 has clockwork, S-OFF, root, custom splash1, etc.
phonoflux said:
Howdy Guys
A few days ago a mate of mine employed me to help him root his new toy. After doing mine multiple times (for various reasons) it was supposed to a piece of cake.
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Aug 10 2010,17:52:18
.....
Click to expand...
Click to collapse
Yea there is definitely a new model i have the same problems. Clockwork Recovery dont work only Amon Ra and Alpharev dont work either. Stops at step 3 everytime saying:
"Could not push the initial files during step 1. this is most likely a permissions error on your data partition.
We have tried our best to circumvent this, but most likely your ROM is either not rooted properly, causing failure.
Your best option is to backup everything, and flash a custom ROM that is properly rooted and has ADB root.
Remember: your HBOOT is NOT S-OFF, and it is not bricked."
I am having to create a goldcard to revert my Desire back to factory rom due to a munted update of 2.29.
The phone is locked in the boot cycle but gets no further. Trying to go into recovery brings up the red triangle then pwr + vol up brings the message: E: Can't Open /cache/recovery/command
So....
Im trying to build a goldcard to restore to factory ROM but I cant boot into the phone to read the CID of the SD card!
Im using OSX 10.6.5 and cannot find anything that tells me how I can do this.
Can anyone help or maybe even tell me another way to recover my phone?
Boot screen gives this information, if its of any use:
HTC Desire
Bravo PUT1 Ship S-ON
HBoot-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Hi all
I have tried to install a new ROM but was not successful, and now when I try to get back to the ROM I had before (restore) I am not getting anything in the menu and no reception.
So at the moment I have this in the BootLoader
BRAVO UNKNOWN SHIP S-ON
HBOOT-0.75.0000
MICROP-031D
TOUCH PANEL-SYNT0101
RADIO-5.09.05.30_2
Mar 5 2010,21:12:15
Now this is not the first time I am flashing a new ROM, and normally I had no problems but I tried the Sensation with my Pays FROYO ROM and after booting, it gets stuck on the with screen.
I tried to follow some tutorials but cannot manage to get any to work.
This is what I am doing
1) Recovery
2) (after the black screen with red arrow, I press the vol up button and power)
3) I go into the green screen
4) wipe data/factory reset
5) nandroid
6) restore
7) i choose the latest restored rom
but this does not load properly, after restoring, I get no options when clicking the menu button, and no reception.
Any help will be very much appreciated since I ran out of ideas what to do.
Thanks a lot
i have an evo that belongs to a friend he got it used, looks as though it was rooted before. this is all the information i have
supersonic evt3 ship s-off
hboot-2.18.0001
microp-041f
touch panel-atmel224_16ab
radio-2.15.00.01.15
dec 21 2011 12:50:32
the phone only boots up to the hboot screen, the volume and power buttons do nothing when they are pressed. i have gone thru the forums for almost a week trying to download and install every possible solution as well as following the steps in most of the forums that are even remotely related to this issue but still no luck. when i put a PC36IMG.zip on the sd card it gets to a stage of parsing sd zip but never moves from that spot.
anyone have any suggestions or recommendations to try as well as links that work for downloads, a majority are dead as to be expected on an older device.
fury15 said:
i have an evo that belongs to a friend he got it used, looks as though it was rooted before. this is all the information i have
supersonic evt3 ship s-off
hboot-2.18.0001
microp-041f
touch panel-atmel224_16ab
radio-2.15.00.01.15
dec 21 2011 12:50:32
the phone only boots up to the hboot screen, the volume and power buttons do nothing when they are pressed. i have gone thru the forums for almost a week trying to download and install every possible solution as well as following the steps in most of the forums that are even remotely related to this issue but still no luck. when i put a PC36IMG.zip on the sd card it gets to a stage of parsing sd zip but never moves from that spot.
anyone have any suggestions or recommendations to try as well as links that work for downloads, a majority are dead as to be expected on an older device.
Click to expand...
Click to collapse
Ok,i read what you wrote,so is what i did is,download the htc HTC Sync Driver ,then download and install Smelkus Recovery ,go into Hboot and then usb fastboot and open your sd card and copy the PC36IMG.zip onto your sd card,unplug and boot back into Hboot and wait for the prompt,push up and then down,then scroll down to recovery and click it,that should work,unless you have internal problems.
If it never moves past the part of parsing your sdcard, you need to reformat it (the sdcard) to FAT32
Hi all, I am having problems rooting and flashing a custom rom to my desire phone. My phone has the following:
android 2.3.3
bravo pvt1 ship s-on
hboot-1.02.0001
microp-031d
touch panel-synw0101
radio-5.17.05.23
jul 22 2011, 16:19:19
I tried using unrevoked 3 tool, but i got the error that my firmware was too new. What would be the easiest way for me to root and flash a custom ROM on my phone please?
Thanks in advance guys
ewicc said:
Hi all, I am having problems rooting and flashing a custom rom to my desire phone. My phone has the following:
android 2.3.3
bravo pvt1 ship s-on
hboot-1.02.0001
microp-031d
touch panel-synw0101
radio-5.17.05.23
jul 22 2011, 16:19:19
I tried using unrevoked 3 tool, but i got the error that my firmware was too new. What would be the easiest way for me to root and flash a custom ROM on my phone please?
Thanks in advance guys
Click to expand...
Click to collapse
To root use Revolutionary. It will give s-off and then you will be able to flash a rooting tool. I'm a noob too and have used it very recently to s-off and root my Desire without any problem... You will find useful information in the forum for that...
Hope this helps...
Edit: I tryed using unrEVOked 3 also and got the same error...
ewicc said:
Hi all, I am having problems rooting and flashing a custom rom to my desire phone. My phone has the following:
android 2.3.3
bravo pvt1 ship s-on
hboot-1.02.0001
microp-031d
touch panel-synw0101
radio-5.17.05.23
jul 22 2011, 16:19:19
I tried using unrevoked 3 tool, but i got the error that my firmware was too new. What would be the easiest way for me to root and flash a custom ROM on my phone please?
Thanks in advance guys
Click to expand...
Click to collapse
For GB use Revolutionary. Unrevoked worked well on Froyo.
Thanks guys I managed to root and install a recovery file/rom.. heres how i did it
On the Revolutionary page read everything and download the following:
a) Revolutionary zip - save to PC. They will ask for info (currently) on your phone to get a beta key.
b) Root file - place this on your SD card. I used Superuser-3.0.7-efghi-signed.zip
Now you're ready to go.
S-OFF PROCESS
Run Revolutionary (unzip and run) and follow prompts. Say no to installing their recovery.
Congratulations, you should be S-OFF now. You can check by booting to Hboot and seeing if you have a nice pink "Revolutionary" label above your HBoot info.
ADDING CUSTOM RECOVERY
it's time to install your recovery file. i used (recovery-clockwork-5.0.2.0-bravo.img)
a) Boot into fastboot mode (from off, volume-up and power or volume-down and power then cycle to fastboot option)
b) Connect phone to PC through USB. You should see "FASTBOOT USB" on your phones screen.
c) Open CMD (Start > Run > type "cmd" and press enter)
d) Type "fastboot flash recovery c:\your recovery file name" where c:\your recovery file name is the exact location and name of the recovery file you downloaded.
You should now have a S-OFF phone with a custom recovery
ROOTING PROCESS
Now for rooting:
a) Boot into Hboot (from off, hold vol-down and power) and choose "Recovery" from the menu.
b) Choose "flash zip from SD card" or similar from Recovery menu (use trackpad to navigate)
c) Choose the Root file you downloaded to your SD card from the Revolutionary website.
d) Wait till it says it's done, then choose to reboot.
Congratulations, you're S-OFF and Rooted!
Whats the best and most stable custom rom to use please?
Also I backed my phone using the recovery.. it stated that I have no sd-ext..is that bad? Do I need to change that?
Thanks again for your help
my phone now has the following:
bravo pvt1 ship s-off
hboot-6.93.1002
microp-031d
touch panel-synw0101
radio-5.17.05.23
aug 10 2010, 17:52:18
Thanks again for your help
You would need an ext partition for many roms, to get a lot more internal memory. Check the partitioning guide in my sig.
A good rom to start out with is MildWild Redux. I've been using it since it was released. No problems.
abaaaabbbb63 said:
You would need an ext partition for many roms, to get a lot more internal memory. Check the partitioning guide in my sig.
A good rom to start out with is MildWild Redux. I've been using it since it was released. No problems.
Click to expand...
Click to collapse
thanks... if i use the method in the guide, will i lose the clockwork recovery rom? Will I need to install that again?
ewicc said:
thanks... if i use the method in the guide, will i lose the clockwork recovery rom? Will I need to install that again?
Click to expand...
Click to collapse
4ext is a better recovery than ClockWorkMod.
thanks all for your help.. I have managed to root and install MildWild 9.5 on my phone and so far it seems to be working fine