I am having to create a goldcard to revert my Desire back to factory rom due to a munted update of 2.29.
The phone is locked in the boot cycle but gets no further. Trying to go into recovery brings up the red triangle then pwr + vol up brings the message: E: Can't Open /cache/recovery/command
So....
Im trying to build a goldcard to restore to factory ROM but I cant boot into the phone to read the CID of the SD card!
Im using OSX 10.6.5 and cannot find anything that tells me how I can do this.
Can anyone help or maybe even tell me another way to recover my phone?
Boot screen gives this information, if its of any use:
HTC Desire
Bravo PUT1 Ship S-ON
HBoot-0.93.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Related
Hi,
I have (had) an unbranded, unlocked, Desire. I rooted, I loaded custom rom (worked fine), but the ROM manager screwed up something. I guess, it reflashed the bootloader (or recovery?), but failed.
Now the desire cannot boot. It stucked at the white screen, with HTC logo.
I can enter the bootloader. It says:
Bravo PVT3 SHIP S-On
HBOOT-0.93.001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.10.05.23
Aug 10 2010, 17:52:18
HBOOT-USB PLUG
If I try to go to RECOVERY the screen goes white, and nothing happens.
If I put the PB99IMG.zip to SD card, the HBOOT finds it, but says, "Main version is older"
The RUU utility can see the phone, but can't reflash it, because of error 140
Please help me, what to do.
hello friends i have desire which restarting continuosely on htc logo i can go in recovry mode ,fastboot and bootloader mode
i tried to flash with 4 different files but it giving me "COUSTOMER ID " error
can any one please help me to make my phone alive
BRAVO PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-4.06.00.02_2
Mar 29 2010,21:34:33
You need to make a goldcard to bypass this issue. If you only have 1 card then make sure you format the card after installing your rom. I have the same issue when installing stock roms. Apparently this goldcard method works better.
I installed a neondroid theme from this link: http://forum.xda-developers.com/showthread.php?t=554028 from the SD card through recovery mode, rebooted my phone, and it won't boot to the wallpaper.
It's supposed to show the joker with s-off on it for a few seconds then go off then my network provider shows then my wallpaper.
It just stays at the joker then a black line appears on screen.
Any ideas how I can get my phone functioning again??
img flashing won't work as i get a CID error, just in case anyone suggests anything. I don't know how to overcome this cid error.
--- AplphaRev ---
BRAVO PVT4 SHIP S-OFF
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.14
Aug 10 2010, 17:52:18
Reboot into recovery, go to mounts and storage and ersae everything apart from sdcard, then restore backup. Should fix it.
I have no recovery file. Is there a copy somewhere i could use?
You should always work with backup in the recovery, before flashing anything.
One thing you might try: Get the zip of your current ROM (not the Theme) and flash it right over...
And be patient: first boot always takes some time.
To get rid of of the cid error, you need either create goldcard with ubuntu or use the appropriate ruu from your provider (make sure this one is not too old).
Which rom are you running? As far as I understand, this theme is for only cyanogenmod 4.0.4.
Hi,
My HTC desire is stuck on boot loop.
I tried various options:
1. clear storage and reboot
2. remove sim and reboot
3. remove sim and sd card and reboot
4. Flashed Android gingerbread upgrade (2.3.3) ROM (using goldcard) and reboot
My phone is still stuck on boot loop.
BRAVO PVT1 SHIP S-ON
HBOOT-1.02.0001
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.17.05.23
Jul 22 2011, 16:19:16
Can i try to downgrade HBOOT and flash Stock Froyo RUU?
Update on this issue
Hi,
I tried to S-OFF using revolutionary 0.4pre4 windows, but the phone is not recognised in fastboot usb mode and i get the message "waiting for device...."
Is this phone bricked?
Thanks and regards,
Aravindan
depends on rom. maybe you have to partion your sd 1. partiton fat32 and 2. partition ext3 or ext4 (ca 1,5 GB; min 1GB max 2GB) for dalvik cache to sd
Check this guide if you haven't seen this yet.
http://forum.xda-developers.com/showthread.php?t=1275632
Thanks stankyou.
Yes, i tried my options based on that post.
My Phone had stock rom Gingerbread 2.3.3 with S-ON.
I tried flashing the Stock ROM and it went through fine no errors throughout the process.
But once the phone rebooted after flashing, it was still boot looping.
My phone is recognized on my laptop at HBOOT menu but when it goes into fastboot it is not recognized.
Refridgerator trick?
Going to try Refridgerator trick (http://forum.xda-developers.com/showthread.php?t=1134062&page=2) today.
Keeping my fingers crossed X
Update: It did not work :-(
Hi all, I am having problems rooting and flashing a custom rom to my desire phone. My phone has the following:
android 2.3.3
bravo pvt1 ship s-on
hboot-1.02.0001
microp-031d
touch panel-synw0101
radio-5.17.05.23
jul 22 2011, 16:19:19
I tried using unrevoked 3 tool, but i got the error that my firmware was too new. What would be the easiest way for me to root and flash a custom ROM on my phone please?
Thanks in advance guys
ewicc said:
Hi all, I am having problems rooting and flashing a custom rom to my desire phone. My phone has the following:
android 2.3.3
bravo pvt1 ship s-on
hboot-1.02.0001
microp-031d
touch panel-synw0101
radio-5.17.05.23
jul 22 2011, 16:19:19
I tried using unrevoked 3 tool, but i got the error that my firmware was too new. What would be the easiest way for me to root and flash a custom ROM on my phone please?
Thanks in advance guys
Click to expand...
Click to collapse
To root use Revolutionary. It will give s-off and then you will be able to flash a rooting tool. I'm a noob too and have used it very recently to s-off and root my Desire without any problem... You will find useful information in the forum for that...
Hope this helps...
Edit: I tryed using unrEVOked 3 also and got the same error...
ewicc said:
Hi all, I am having problems rooting and flashing a custom rom to my desire phone. My phone has the following:
android 2.3.3
bravo pvt1 ship s-on
hboot-1.02.0001
microp-031d
touch panel-synw0101
radio-5.17.05.23
jul 22 2011, 16:19:19
I tried using unrevoked 3 tool, but i got the error that my firmware was too new. What would be the easiest way for me to root and flash a custom ROM on my phone please?
Thanks in advance guys
Click to expand...
Click to collapse
For GB use Revolutionary. Unrevoked worked well on Froyo.
Thanks guys I managed to root and install a recovery file/rom.. heres how i did it
On the Revolutionary page read everything and download the following:
a) Revolutionary zip - save to PC. They will ask for info (currently) on your phone to get a beta key.
b) Root file - place this on your SD card. I used Superuser-3.0.7-efghi-signed.zip
Now you're ready to go.
S-OFF PROCESS
Run Revolutionary (unzip and run) and follow prompts. Say no to installing their recovery.
Congratulations, you should be S-OFF now. You can check by booting to Hboot and seeing if you have a nice pink "Revolutionary" label above your HBoot info.
ADDING CUSTOM RECOVERY
it's time to install your recovery file. i used (recovery-clockwork-5.0.2.0-bravo.img)
a) Boot into fastboot mode (from off, volume-up and power or volume-down and power then cycle to fastboot option)
b) Connect phone to PC through USB. You should see "FASTBOOT USB" on your phones screen.
c) Open CMD (Start > Run > type "cmd" and press enter)
d) Type "fastboot flash recovery c:\your recovery file name" where c:\your recovery file name is the exact location and name of the recovery file you downloaded.
You should now have a S-OFF phone with a custom recovery
ROOTING PROCESS
Now for rooting:
a) Boot into Hboot (from off, hold vol-down and power) and choose "Recovery" from the menu.
b) Choose "flash zip from SD card" or similar from Recovery menu (use trackpad to navigate)
c) Choose the Root file you downloaded to your SD card from the Revolutionary website.
d) Wait till it says it's done, then choose to reboot.
Congratulations, you're S-OFF and Rooted!
Whats the best and most stable custom rom to use please?
Also I backed my phone using the recovery.. it stated that I have no sd-ext..is that bad? Do I need to change that?
Thanks again for your help
my phone now has the following:
bravo pvt1 ship s-off
hboot-6.93.1002
microp-031d
touch panel-synw0101
radio-5.17.05.23
aug 10 2010, 17:52:18
Thanks again for your help
You would need an ext partition for many roms, to get a lot more internal memory. Check the partitioning guide in my sig.
A good rom to start out with is MildWild Redux. I've been using it since it was released. No problems.
abaaaabbbb63 said:
You would need an ext partition for many roms, to get a lot more internal memory. Check the partitioning guide in my sig.
A good rom to start out with is MildWild Redux. I've been using it since it was released. No problems.
Click to expand...
Click to collapse
thanks... if i use the method in the guide, will i lose the clockwork recovery rom? Will I need to install that again?
ewicc said:
thanks... if i use the method in the guide, will i lose the clockwork recovery rom? Will I need to install that again?
Click to expand...
Click to collapse
4ext is a better recovery than ClockWorkMod.
thanks all for your help.. I have managed to root and install MildWild 9.5 on my phone and so far it seems to be working fine