Hello!
I have a car GPS Navigator which has a feature to pair with a mobile phone or PDA via bluetooth to use it as handsfree, view contacts, make calls from GPS screen ans so on. Both devices can see each other via bluetooth but the problem is that they can't pair. My BA has WM6.1 installed, I haven't any problems with bluetooth yet. May be BA does't support this functionality or it does'n have appropriate Bluetooth Profile ?
May be it would be useful to someone with similar issue. My bluetooth problem has been resolved just by installing WM6.5 ROM ! I've tried almost all versions of WM6.5 located on xda-developers and every one has the bt stack much better than WM6.1 has.
Related
Hi,
I have problems connecting to my bt headset since I have installed TomTom3. I am running the build3500 bluetooth stack from the 1.06.02 FRA radio. It was working fine without even losing connection with the mda, but after I installed tomtom, it can pair, but cannot connect. The weird thing is that I can sync using bluetooth. I suspect tomtom is keeping busy some of the bt com ports? i noticed that during installation, it required to close bluetooth (cause it said the file BtcoreIf.dll was in use) and as soon as I did that, it finished installation, but since then the headset stopped working. Anyone has similar problems??
Thanks in advance for any input.
Update
Managed to sort it out by upgrading my BT stack to 1.0.0.3900. Still cannot find any similar complaints in any forums. Can it just happen to my MDA III? Who knows....at least it works now, even if my engineering background is not happy with it :shock:
Upgrading the bluetooth stack
Hi,
I have exactly the same problem as you had, although I'm on the UK network Vodafone and have an XDA2s.
My current radio version is 1.06.02 but I can't fine what version my bluetooth stack is. How do I upgrade to 1.0.0.3900?
Thanks in advance for any assistance you can provide.
Hi,
I am using Qtek9090 with TomTom 3.07 and Jabra BT800 headset and have not the problems you people talk about here. I have to mention that I immediately updated my BT version from 2400 to 3900 the same day I purchased the whole stuff. I was - when I was in the shop - told that TomTom 3.07 can sometimes cause problems due to BT version of Qtek (1.0.0.2400) and I better upgrade it to 3500 and/or 3900. I was also told that there were known problems with earlier versions of TomTom wireless (like in your case TomTom 3.03) and that I (at least) had to use TT 3.07 and/or better upgrade the BT driver of my Qtek9090. In order to find your current BT version:
- Click on Bluetooth icon
- Select Bluetooth Settings
- Go to [About] tab
- And there you see your own Build
- You can also select [Advanced] button in [About] for more details
Anyway, once being at home and taking my device out of package I did a BT upgrade to 1.0.0.3900 right away and so far I have no issue with BT stack. Even Jabra BT800 which a lot people complain about works fine with my Qtek9090 (OK, I admit the CallerID at Jabra still not working but I already expected that).
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
tomtom gps
The problem is that tomtom is messing around a bit with bluetooth for bt gps receivers.
So after installing tomtom allways reinstall the latest bt drivers.
AFAIK you should always use TTN 3.07 (GPS and Navigator) on SE and Phone Edition devices (Blue Angels is both WM2003SE and Phone Edition)
Big Fat TY
I was getting stupid before reading this 3d.
Even went back to the shop with the motorola headset and had them show me it was working....
Tom Tom was the reason.
Avareh said:
I downloaded the 3900 version of Bluetooth driver (plus another Audio driver) at the following URL in The Netherlands: http://www.pdanieuws.nl/modules/mydownloads/singlefile.php?lid=37
kind regards,
- Avareh ([email protected])
Click to expand...
Click to collapse
This link is not working at the moment, is there another link for this, i am running an xdaIIs and installed navigator3 and could bond but not connect to my bt headset.
will try the stack upgrade also a link fopr nav3 3.07 would be handy too...
cheers.
all sorted now, have got the files and fixed the issue.
help me
I have a Imate Jas-Jar windows mobile 2005. A new version of GPS Nav-N-Go was released for WM 2005 I installed it and it doesn't work! It doesn't recognize my GPS on the Parrot CK3300.
I talked with the Nav-N-Go developers and they told me that the Nav-N-Go works with 9 GPS antenna's. It seems to me that the problem is in the definition of a communication "COM port".
Please help me to solve this problem. Is there a way to define a "COM port" for GPS in the CK3300
jorge
JasJar & TomTom5 using a Parrot 3300 for GPS & Phone
I also have a Jas Jar badged as an Orange SPVM5000 and have similar problems. I am not a techie by any meands but I do not think the problem is with the Parrot 3300.
The Bluetooth pairing connects Parrot and Phone.
Setting the com port is identifying where the incoming gps signal is made of available on the phone.
TomTom5 is the sat nav software I use and it seems only to work by connecting to certain com ports. Unfortunatley, the phone does not like assigning the connection to this port.
Elsewhere on this site there are instructions which allowed me to pair the phone with another GPS BT reciever I use when out and about.
The same procedure will not work with pasiring the parrot.
Does anyone have any suggestions as to how I can pair with the Parrot to get the phone and gps working?
You may find some answers here -- worth a try, anyway.
http://www.parrot.biz/forums/english/
I am interested in this http://www.parrot.biz/united_kingdom/products/index.php?id=ck3300 Does anybody have any experience using this device, how well does it work etc. ?
I plan on using it with O2 Mini S and possibly Tom Tom software what do you guys think?
I have a CK3300 and the similar CK3100 (no GPS) in my wife's car.
They work superbly with Sony Ericsson phones, less well with Motorolas and Nokias but a bit of a disaster with the XDA Mini-S. Doesn't auto connect, doesn't synch contacts properly, overwrites voice tags. There's a bunch of posts on the subject in the Parrot forum on their website. Rumours that there will be a software upgrade shortly which will address some issues.
I haven't got around to trying the GPS with TomTom on the XDA (as I can't get it to install!) but it worked fine with my previous PPC (an iPaq RX3715)
--
Dave
I have a CK3300 not had to meany problems on the GPS side but my xda 2s and my axd mini would not work with the handsfree bit.
My xda exec works fine on GPs and handsfree.
Very good bit of kit overall
Beside experience, I have a question to post here.
I have Parrot СК3300 for 2 years. As handsfree kit, it works perfectly with Sonyericsson K750i, 700i, Z800, P900. With Sonyericsson P900, it works perfectly as hands free kit and GPS module simultaneously.
However, after connecting my QTEK2020i (1.11.00 WWE, Radio 1.02.00, ExtROM 1.11.113 WWE dd 27of Jan 2005) I can use Parrot as GPS module only. Any attempts to use Parrot as kar kit leads only to loud clicks from speakers. So just for now, I use Parrot as hands-free for Sonyericsson K700i and as GPS module with QTEK simultaneously.
No way to fix it. I delete all Bluetooth devices, soft reset, ad only Parrot as hands-free, soft reset. No result.
Can you suggest me how to fix it.
Thanks in advance!
Hi,
I have a CK 3000 intsalled with Tom Tom and a third party BT GPS mouse. The Parrot works very well but it has to be paired as a Hands-free set and not as a headset. One small bug, though: I have to start TT first for the GPS to connect when getting back into the vehicle. After that I start the engine, which connects the CK3000 to my MDA II. If the CK is connected first, TT can't find the mouse.
I've been looking for a way to get the audio to be put through the the CK. I once found a piece of software that could do that on this site but inspite of hours of searching, I haven't been able to find it again. - HELP!
parrot car kit
I have a parrot CK3500 GPS car kit and it works well with TomTom Mobile 5 on my SPV E200 ,C500, C550 and has worked with TomTom Navigator 5 my M2000 as well. This is for Voice AND GPS simultaneously.
with earlier versions of TOMTOM i needed to rename the bluetooth connection from Parrot to TomTom Wireless GPS.
I have an XDA Mini S too which is on a data only tariff (so havent tried handsfree) but TomTom 5 works with it for GPS. They seem a little fiddly to set up, but once set up they are great.
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
The only criticism is that the GPS voice instructions dont go through the speakers. However sometimes they do, and it seems to be if you start TomTom before you switch on the car ignition, the car kit thinks a call is in progress and relays the GPS through the speakers. It doesnt always work, but sometimes its a bit of a shock to get Jane bellowing through the speaker!!
The downside is that if you take a voice call over the car kit, it seems to re-set and the GPS voice then reverts back to the phone speaker.
I have emailed Parrot about this and have not had a reply as yet.
Re: parrot car kit
shadowman said:
I found i needed to use "AnyGPS Tweak" on all the smartphones to get it to connect initially
I had a CK3300 in another car and that worked exactly the same.
Click to expand...
Click to collapse
Thanks for your reply.
As far as I understand, I can't solve problem with incoming - outcoming telephone calls by some "secret' QTEK settings.
Therefore, I'll try to find "Any Bluetooth Tweak" program to fix it.
Can you suggest any "Tweak" software?
Hi,
After I install tomtom6 I'm not able to connect to my Bt headset?
Anyone had this same problem and solve it?
Regards
Kruz
i did the same - for me i had to select the bt headset via other bluetooth, where as before i had it set through other cable
hope that helps
shakirakbari said:
i did the same - for me i had to select the bt headset via other bluetooth, where as before i had it set through other cable
hope that helps
Click to expand...
Click to collapse
Don't you mean: Connect GPS via other cable in your TT6 config, instead of the BT Headset??
I have exactly the same problem here. (HTC Blue Angel with BlueTooth for Windows CE BT-PPC/PE Version 1.0.0 Build 3900)
When TT6 is installed, I can pair with my Jabra BT135 and create a shortcut, but I can't connect to it by using the shortcut.
After removing TT6 from the Blue Angel, I can connect to the Jabra using the same shortcut immediately.
So think with me here, why is this happening?
Could it be the case that the HTC Blue Angel is only capable of having 1 BlueTooth device/COM-port/connection/channel,
and that TT6 is somehow claiming a BlueTooth channel for a wireless GPS BT receiver that it could try to connect to and so the Jabra won't connect to it anymore?
Or is the HTC Blue Angel capable of connecting with more than one BT-device at a time, but are the headset and TT6 using the same COM-port for BT communications or something? In the second case, how can I change the port used by either the Jabra of TT6 ?!?
Does anybody have an answer to this?
have just resolved an issue others may have with TT6 installation affecting Bluetooth earpiece functionality.
Actually, I found the answer on the net after literally days of searching!.
If you have installed TT6, it will overwrite at least one bluetooth dll file. This can prevent other BT devices functioning after TT6 install. On my XDA 2s, I was able to pair my bluetrek G2 headset, but not connect. The answer is to re-name the "BtCoreIf.dll" file in the PDA wndows file to ""BtCoreIfold.dll".
Immediately, I had my BT earpiece functinality back, AND TTN 6 works too! Don't ask me how, it just worked for me
qtek9090
On my BlueAngel is the same with TT6 vs. Motorola Headset H300.
I've tried to rename BtCoreIf.dll but system don't let me to delete the original file I thing because it is in ROM.
I simple do a workaround: open bt service and connect the headset manually
argosafe said:
have just resolved an issue others may have with TT6 installation affecting Bluetooth earpiece functionality.
Actually, I found the answer on the net after literally days of searching!.
If you have installed TT6, it will overwrite at least one bluetooth dll file. This can prevent other BT devices functioning after TT6 install. On my XDA 2s, I was able to pair my bluetrek G2 headset, but not connect. The answer is to re-name the "BtCoreIf.dll" file in the PDA wndows file to ""BtCoreIfold.dll".
Immediately, I had my BT earpiece functinality back, AND TTN 6 works too! Don't ask me how, it just worked for me
Click to expand...
Click to collapse
I will try this out tomorrow on a HTC Blue Angel.
vdl said:
I simple do a workaround: open bt service and connect the headset manually
Click to expand...
Click to collapse
Then you don't have the problem as descibed in this topic at all. Because when TT6 is installed, it is impossible to connect to the BT headset (manually).
So I guess you are lucky.
Flow said:
Then you don't have the problem as descibed in this topic at all. Because when TT6 is installed, it is impossible to connect to the BT headset (manually).
So I guess you are lucky.
Click to expand...
Click to collapse
I think so: when headset is connected, TT6 do not connect automatically the Gps receiver, I must to doubleclick on Gps icon.
And vice versa.
Hello,
I'm new here, but I recently got a Axim X51v. I decided to immediately (after playing around with it for a while) to flash it to the WM6 Football ROM. It works well and so far that part I haven't found any problems with.
Everyone recommends the Widcomm BT Stack so I installed it and have very odd results. With Widcomm I am able to use A2DP well and the pairing and setup is easy and great. Somehow it cripples my ability to use my BT GPS Receiver (Holux 236). TomTom 6 will not detect the GPS signal at all, but the GPS reciever is paired and everything.
If I don't use Widcomm then A2DP does not work. I use a pair of Kyocera BT headphones and it will pair with the normal BT setup and it is recognized as a headset. When I try to use it with Windows Media I will hear the first second and then nothing. The player continues to play, but I just hear dead air. The GPS receiver works well when Widcomm isn't installed. It automatically detects it and TomTom gets the signal to work.
I really like the Widcomm BT Stack, but I kind of need the GPS. I've read some articles on different setups, but I can't find many on GPS problems and if I find some they don't have any answers. If you have any advice on what I could then please post. From my search I haven't found anything here either, but if I'm wrong then please point me to the right direction.