Develop Bugs

tom tom and BT car kit not working with pda2k

hi
if i instal bt gps tom tom my i-mate pda2k can`t connect to nokia car kit, but without tom tom navigator car kit conection is fine
rom 1.22.00 wwe
radio 1.12.00
bt 1.0.0 build 3500

Try deselecting 'Recieve all incoming beams' under 'Settings;Connections;Beam'.

tom tom
i trided but didn't worked
i installed different software gpsinf and it worked fine
BT gps and nokia hands free

What vs of TT are you running if vs3 roll back the GPS driver to vs 2.06, alternativly some people have had luck using TT vs3,07 I tried various vs3 settings and never got it to work the headset will pair and connect but when TT vs3 is loaded the headset will pair but fails to connect - I use TT vs5 which works but not with BT GPS and Headset tried it and it worked until you treminated call and at that point you lost GPS - so I went wired for GPS and all is fine. Mike

tom tom v3
my tom tom v3
i would upgrade to v3.07 after my holidy

Give it a try but the only way I got the XDAIIs to do what I needed was to ditch the BT GPS and go with wired, combined with BT headset - had no problem sinse then

Generic BT GPS & TomTom 5

I have just bought a Generic BlueTooth GPS for use with TomTom 5. I successfully paired the GPS with the XDA IIs, then the problem came of getting tomtom to find it. It will not see it as a Bluetooth GPS so I have to select "Other Cable NMEA GPS", set the baud rate to 38400 and set it to COM 6.
This will work for approx 40mins before TomTom5 crashes. It then takes a soft reboot to get it working again.
Is anyone else having similar problems?
I might have to go back to TomTom3.
My device info:
ROM Version: 1.40.00 WWE (i-mate ROM)
Radio Version: 1.12.00
ExtROM Version: 1.40.176 WWE

Well after struggling with TomTom 5 for the last time, I'm going back to TomTom 3. I believe there is a patch out there to get the TomTom 5 maps to work with 3.

I use my pda2k with tomtom 5.1 and both the Tomtom 3 bluetooth gps and a BT-338 Globalsat GPS Bluetooth Receiver .
In order to get it to work, I have to switch on bluetooth and connect to the gps manually, and then start Tomtom. Occaisonally the gps wont connect or Tomtom just wont detect the gps. I then to a soft reset, try again and it works.
I have not had to do anything clever with the Tomtom settings, in fact I think I just use the Tomtom bluetooth setting for both receivers.
If someone phones me whilst using Tomtom, after the call, tomtom does not detect the gps and I have to quit and restart.

Well I'm back on TomTom 3 now, it's lovely and stable, the BT connect first time everytime and I can make/accept calls on my BT headset.
Perfect!
If only the boys at TomTom had put some effort in and tested 5 before releasing it.

Hello Porkspeare,
can you tell me which version of TomTom 3 you are using and what bluetooth stack? I have the problem that I cannot use my BT headset Bluetrek G2 after installing TomTom 3.01 , even though before the TomTom install it works fine. Would be interesting to know what combination works on your machine.
Thanks

ROM Version: 1.40.00 WWE (i-mate ROM)
BlueTooth Version: 1.0.0 Build 3900
TomTom Version: 3.03 (427)
BT Headset Ver: Blue Trek G2
Hope this helps.

Vavavoom, are you using the very latest bluetooth driver from tomtom for version 3..

tomtom 5 hangs
I have same problem...
The problem goes away if you turn off all POIs
some say copying poi.dat from tomtom3 maps will solve it..
also seen something about a vga registry hack, havent tried any - i have just turned off poi until some solution pops up...
Jan

Hi cruising-thru,
I don't know what you mean by "bluetooth driver for TomTom3" - can you get a seperate update for just the bluetooth driver? The only update I found was for the Navigator (3.07) and GPS (3.07). Unfortunately I can only install the GPS update. If I try to install a Navigator update higher than 3.01 TomTom tells me it cannot find a map even though it's installed and activated. My current combination is therefore Navigator 3.01 and GPS 3.07.
If there is a sperate BT update could you please tell me where to find it?
Thanx

Thanx porkspeare,
I have the same combination except I only managed to install TomTom up to version 3.01. Maybe if I somehow manage to update to 3.03 it solves my problem. Will keep trying
Cheers

Parrot CK3100

I have upgraded my MDA PRO with the recent TMobile UK firmware:
ROM 1.20.32WWE
ExtROM 1.20.120WWE
Radio: 1.06.00
I can use my Parrot CK 3100 with it, but my contacts are not synchronized.
Has anyone figured-out how to do it?
Many thanks.

Can't be done automatically (confirmed by Parrot)
You will have to select them one-by-one and then beam to the ck3100
OR: Using PocketInformant which allows you to select all contacts (or a subset) and beam them just with one click.

I have upgraded the Parrot firmware from 1.13 to 1.14b (they mention this release has better synchronization for PDA's with WM5) and ... guess what?
I WORKED!!! My contacts were automatically synchronized!
I repeat: I didn't have to send them one by one nor use Pocket Informant! It worked automatically!
Great!

Well, I have now my contacts synchronized, but after a few days of driving I realize my Bluetooth connection is not stable. My Parrot Partnership is regularly erased after a while.
Is there a Bluetooth patch a have to install? Do I have to upgrade my radio to 1.09, maybe?
Thanks for your help.

How can i disabled Sync ?¿?
Regards

I have the XDA Exec
ROM Version 1.30.107
Radio Version 1.09.00
ExtROM Version 1.30.162 WWE
I too have the probelem of the pairning regularly disapearing - how many others have this problem with the CK3100
I have updated to the latest 14b Flash for the parrot but this does not help.
Im assuming its an XDA Exec issue - does anyone know if O2 will be releasing a new rom with more stable bluetooth in the near future

I have XDA EXEC with latest i-mate ROM (1.30.76 with 1.09.00 radio) and my Parrot synchronizes everything (even the calls registering). No problem with bluetooth (using latest 4.14b).
I installed JetWARE (http://www.jetwaremobile.com/index.htm) and CK3100 gives me also the battery status, the network signal strength and Network name.
The only problem I now have is that I can't use XDA voice dial (using voice command) when I presse CK3100 to make voice dial. It says "connection failure to recogning system". Can someone help me to put this working?

I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it.
It seems the Jasjar turns off BT or it just does not show up. I need to go into BT manager and renable BT on the JJ or select the CK3100 and set it as the hands free.
It seems to be different problems, and it is really annoying me.
I am running the CK3100 v14 BIOS and the 1.09 Radio, I might try the 1.11 radio.

parrot3100
I have the same problem. It looks like a program is causing a memory leak or something like that.
RadioROM 1.11.00 is worse (in my case) then v1.09.00. At this moment I have started to rule out installed applications.
I am no shure whether this is caused bij the Parrot since my BT GPS receiver has identical problems.

mda pro loose BT connection with ck3100
Gadget_Junkie said:
I also have a CK3100 and can sync my contacts, but I seem to loose BT connection every other time I use it. ...
Click to expand...
Click to collapse
I have updated my mda pro with the dutch t-mobile rom 1.30.233 WWE. Since that time is sync-contacts working on my ck3100. But I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. Who can resolve the problem.
And how can i stop the automatic sync of the contacts, every time?
Tnx, Lucas

I have exact the same problem with my mda-pro, every time the paring and connection is lost.

Losing BT connection
lkwq said:
... I loose BT connection every time I'm using the parrot. I've updated the ck3100-firmware from 4.11 to the newst one version 4.15. ...
Click to expand...
Click to collapse
Updating the firmware to 4.15b do not solve the problem. Still losing BT connection. Had to wait to 4.16, Parrot said.
parrot.biz said:
... The Next firmware which is 4.16 will be released in a few weeks.
What you can do is :
- Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE
K600,K750 No Sync
- Connect your phone to the CK3100 carkit.
- On the kit, Enable SETTINGS/ADV SETTINGS/OBJECT PUSH/D500, My-X8.
- From Outlook, select the contacts you want to send to your kit.
- Select FILE->SEND VIA BLUETOOTH->Other, Wait for the kit to be detected
by the computer.
- Enter the Pin CODE 1234 when asked, the contact is sent...
Click to expand...
Click to collapse
I hope it works.
Lucas

BT connection problems
The solution is to connect the htc universal with the Parrot ck3100 on this way:
-Pair your phone using the menu SETTINGS/ADV. SETTINGS/PAIR WITH PHONE/SE K600,K750 No Sync.
-Connect your phone to the CK3100 carkit. Code is 1234.
Click to expand...
Click to collapse
Then remains the connection in position.
You can beam your contacts to the Parrot, one by one. Not all your contacts, but only the contacts you need on your Parrot. And no /H/W/M, of course.
So, it all works. Success!
Lucas

[HTC 8525 + WM6] Bluetooth keeps disconnecting

Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!

viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
which WM6 ROM are you using?

I had this problem with my Audi A4 car phone. The ROM versions using build Build 17745.0.2.3 were not good for that. Now, I'm using the Black Majik ROM and that works like a dream for the BT connections.

walshieau said:
which WM6 ROM are you using?
Click to expand...
Click to collapse
I have Cingular HTC 8525 [HERM100]
ROM Version: 3.30.2.1
ROM Date: 04/17/07
Radio version: 1.41.00.10
Protocol Version: 32.74.7020.18H

viva_unix said:
Hello!
I do not know if someone has the same issue. I upgraded the WM6 to my HTC 8525 and bluetooth just keeps disconnecting all the time. It happened without any reason at all. I am using "Plantronics 510". The headset is fine, just phone switches the bluetooth off and I need to go to settings to switch it back on. I saw some people have a problem with car-enabled bluetooth. Not sure if it is the same problem.
Any advice? Does someone get the same problem? Any patch or solution?
Thank you!
Click to expand...
Click to collapse
Did you manage to solve this? Is so how?
Thanks
Msuk

i started having the same problems but i noticed it after i installed the voice command.. the rom that i use is the gm360 gold. the problem ive got was whenever i was in a phone call using my blutooth and i received a text message it would deactivate my headset. if ur having somewhat of the same problem try disabling ur voice command software...

Multiple AT&T/HTC WM6 ROMs?
My 8525 with the WM6 ROM can no longer route the audio to the BT headset (a Moto HS850 - but this is irrelevant, I suspect).
Basic BT headset usage was fine with WM5 (excepting the known issues with VoiceCommand).
I thought that perhaps the issue was related to the various little registry tweaks and sw patches. However, I had to do a reflash (for other reasons) and currently have just the default WM6, no registry tweaks, no BT sw patches, and MS VoiceCommand 1.6 installed (but set to NOT use the BT headset).
Pairing works fine. So does activation recognition (i.e. the little headset appears in the notification area when I open the boom on the headset and I can hear the background establishment of the BT channel). But audio (dialing tones and Connected call audio) do not reach the headset. The audio also doesn't go to the phone's speaker.
So, are the official ROM updates that repair this? Or, is the cost of going to WM6 the abandonment of BT headsets?
By the way, VoiceCommand 1.6 works fine--if I tell it to stay away from the BT headset.

Pays WM6 Roms
I had the same BT disconnecting problems with my original german Vodafone WM5 and also still have them with Pays WM6 ROMs (2.02 - 2.15) in my Audi A6 MMI.
With the original german HTC WM6 ROM BT worked very well.
Everything else on Pays ROMs is really great. He´s doing great jobs.
Any idea?

I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!

ai6908 said:
I have the same problem with my 8525 and I use plantronics 520. It did the same thing even with other headset too, and also happens in WM5.0, 6.0 and 6.1.
I am tending to believe its a hardware issue, but dont know how to prove it!
Click to expand...
Click to collapse
Come On, experts on the XDA portal, no solution?? noooo way!!??

My friend had the same issue with an tytn2 and last schap's rom in french language.
After an hard reset i get BT work fine with his OPEL.
But before i made lot of test desinstalling soft check registery key with no result. I still do know why BT was disconecting woth no reason.
Cheers.

Audi Bluetooth hands free
I had the same problems in wm6 with some roms.
I use the official HTC TyTn wm6 with excelents results, also Schaps 4.31 work very good (No disconection at all).
Now I am using Pay WWE 4.30 with many disconections.
BTW I have the audi TT bluetooth option.

On my 8525 Hermes I use the latest Pays Rom and it was disconnecting all the time (Parrot BT) - BUT then I decided to TURN OFF THE WAN and it improved greatly. Other thing I noticed is that the Hermes has to be in DIRECT LINE OF SITE of the BT device at all times or it is erratic.

BT
It seems there are differences in the WM6 versions. As said earlier in this thread for me original HTC and Schaps WM6 ROM versions are running without any BT disconnections.
Tried several WM6.1 versions now and every single one is working fine with my Audi MMI.

Similar problems handing BT control between applications
Hi all, I've been experiencing similar problems since changing ROMs. Originally with Schaps 3.60a I was able to make a call whilst listening to music all using my BT headphones. The Call would pause the music & resume afterward. It worked great! However since changing to Schaps 4.0, 4.2 & now CRC's PHKv12r9, I've never had the same. On a couple of rare occasions it has all worked fine but more often the bluetooth has to be turned off & back on again to reconnect. it seems to relate to what other programs are also running. I suspect there must be registry settings which control the bluetooth operational modes which are brought into play by the various programs running.

HTC WM6 - Car Kit Bluetooth Problem (no sound at all)

After upgrade to the official HTC WM6 ROM (spanish version) my integrated bluetooth hansdfree CAR-KIT doesn't work anymore (with WM5 the system works perfectly).
The car is a new CITROËN C4 Picasso, but i think this problem must involve any new PSA Group Car (CITROËN, PEUGEOT...) that mount the same kit.
I can pair the CITROËN hansfree with the TyTN, and both connects (i can see the operator name, the battery level, and the signal level, that WM5 stack doesn't show) but when i try to call, or i receive a call, there is no sound throw the hansfree system.
I also have tried the Jetware bt extension with no succes.
At now i had to downgrade to WM5 because this problem (i need the handsfree working).
The cuestion is...
Is it possible for a ROM MASTER to extract a previous bluetooth working TyTN stack to overwrite the stack that comes with official WM6?... (the WM5 or any working WM6 working stack).
Thanks

The same problem here with the same car; also the Artemis on WM6 (I tried several roms) has no sound.
Downgraded to WM5, and it's all working again.
Not yet tried to get an update for the car; maybe there is also a solution.

I have the same problem with Motorola HF-850 car kit. I'm about to downgrade too. This sux.

Same issue here with Nissan Sentra 2008.
I can dial and receive calls but the audio works about 30% or the time. It is hit or miss.

Same here in a 2007 UK CITROËN C4 (5 door hatchback) with factory fitted Bluetooth car kit, using an Orange M3100 with the Schap's WM6 Pro 3.60a ROM. Looks like I'm going back to the Orange WM5 ROM as this is a deal breaker for me. Very disappointing.

try this
I had similair problems a few pretty good solutions:
-jetware search google i use this one
-Solution:2
Change the COD (Class of Device) from a PDA device to a smartphone device.
This can be done this way:
1. First make sure you've got a backup, or remember all settings you change in the registry.
2. Edit with a registry editor the following key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS\COD
By default my vario II does have the value: 1048852 (decimal)
Change this to: 5374476 (decimal).
3. Soft restart your device
4. Voila! Your device now identifies itself as a smartphone
see this thread
http://forum.xda-developers.com/showthread.php?t=290871

Thanks!
I tried the Jetware solution: no luck.
I also tried the COD trick: very strange result, I was able to make just 1 (one) call and other calls were again not possible (no sound).
Maybe there is a solution in updating the software of the handsfree set in the car. I will ask my Citroen agent to do this, if possible.
I will post the results.

I haven't tried the COD trick, but I don't think this will work. It's not a case of my car 'ignoring' my M3100... it pairs OK, and the car's display shows an incoming call, allows me to pick it up, etc, but no sound comes out of the speakers and the other party doesn't hear my voice. It's like the car is receiving the data stream to tell it what's happening on the call, but not the sound.
I don't have any of these problems with WM5, I don't even need to use the JetWare solution.

same problem with Peugeot 407
Same problem here with Peugeot 407
What I found is that if I start a call without Bluetooth and start Bluetooth during the caal, the sound works perfectly. Every next call has the same problem as before though.
TyTN; WM6 Schap's 3.60a;Radio 1.47.00.10

Hi.
I am with Motorola's HF-850 car kit and I get the sound only after 8-10 full seconds from answering. It is so sad that I have to say "wait....wait" every time I answer a call....

There is a post on this forum that suggests someones got it working with an Audi and the latest Black beta rom...
http://www.4winmobile.com/forums/hermes-black-rom-support/11291-black-x-beta-2-smash-trash-11.html
Anyone tried this?
This post also suggests that the newest Black roms may have fixed the issue
http://htc-devs.com/forum/index.php?topic=42.msg321;topicseen
Here's hoping!

That will not work on the Artemis
But I tried several WM6 roms, including the Black & Blue 4.1: no luck.
Looks like a real WM6 issue, as it's happening with several phone models.
UPDATE: No software update for the factory Citroen bluetooth handsfree according to the local dealer; so that's no solution

I have tried 5 of the latest roms yesterday including all the fixed mentioned in this forum. The best I got was with Sleuth rom where I get audio about 50% of the time. Answering with that rom results in a 5 seconds delay before audio connects causing me to yell "wait, wait, I am here ... "
I even tried a blootooth stack from Broadcomm but the result was not better.
Out of desperation as I bought this car specially for its built in bluetooth kit, I downgraded to Cingular Mobile 5 Rom version (2.15.502.3)
I am surprised and kind of thrilled to report that my 8525 and the car kit are working perfectly together and reliably.
There must be either a bug or a setting/configuration issue on the Mobile 6 bluetooth stack that caused this issue. I am unfortunately back to mobile 5 for the time being until this issue is resolved.

SPV m3100, CK3100 AND WM6
I have an Orange SPV M3100 in Spain with WM6 and i have the same problem. With WM5 and Jetware estension, i had to pair parrot and pda manually every time i got into my car, because they did not connect automatically (Blueetoth-->Devices-->Parrot CK3100-->FreeHand-->OK), but then it works well and i could receive and make phone calls.
But since I upgrade to WM6 i have to pair it manuaaly too, they connect, but it only works from time to time; most times, if i make a call it dials but i cannot speak and people does not hear me; if there is an incoming call, I see the number in the displsy but i can receive it.
Anybody with WM6 and Parrot Ck3100 works well?

I have the same problem with a Mio C520 SatNav. Its bluetooth handsfree works fine with WM5 but not WM6.
I also posted this on a thread on bluetooth headsets, http://forum.xda-developers.com/showthread.php?t=301636&page=6
I tried many different versions. So far with Sleuth's WM6, I had sound around 50% of the time. Similar to one of the previous posters.
Until there is a fix I will have to go back to WM5

I use a parrot car kit and it works fine. However, I noticed some new functionality on my lcd, like displaying battery and signal levels which was not available with the original WM5. That was available only with specific phones. Based on that I believe that a firmware update of your car kit could solve the problem. The issue is whether this is provided for you and if you will have to pay. Parrot offers them for free and you can upgrade via BT.