Develop Bugs

[Q] Always safe mode hove to solve??

As above, i've a big problem with my desire. Maybe for the rain, my hardware key vol- , trackball, and sometimes menu, are gone so everytime my desire boot in safe mode and in that way i can't see and install any app .
Please help me to solve this annoybg problem (without rma). Maybe SOFF could help?? Is there a way to skip safe mode at start???
Regards

cescof said:
As above, i've a big problem with my desire. Maybe for the rain, my hardware key vol- , trackball, and sometimes menu, are gone so everytime my desire boot in safe mode and in that way i can't see and install any app .
Please help me to solve this annoybg problem (without rma). Maybe SOFF could help?? Is there a way to skip safe mode at start???
Regards
Click to expand...
Click to collapse
up please!!!

cescof said:
up please!!!
Click to expand...
Click to collapse
nobody??? here

Hold tarackball+home+power button
it worked for me

[Q] BAD Flash when updating radios, who can I pay?

BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.

[email protected] said:
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
Click to expand...
Click to collapse
is your phone a gsm rhodium or does it have a cdma module too?

Both I believe

This happened to me last night. I reflashed the ROM to fix it. I used MightROM which is FRIGGIN' Awesome if you ask me
In order to do that though you need to be CID unlocked though but basically as long as you are in the bootloader/bios then you can flash the new ROM from your PC via the USB. If you need any links to that stuff I can post, but I am not quite sure if this would be part of XDA or not (Is MightROM xda? Idk? PPCGeeks??)
You can also try holding down the Call answer and Call end buttons at the same time with the power button then put your battery in. This didn't work for me though, but I had to do this anyways after I flashed the ROM so it might work.
edit: Sorry I misread. I am not sure about the Black Screen. Might work though. I was in the bootloader/tricolor to reflash. Maybe your LCD is dead or something for all I know. Sorry Mate.

[email protected] said:
Both I believe
Click to expand...
Click to collapse
oh god then you flashed a GSM radio to a CDMA worldphone (just because it has a GSM module doesn't mean you can flash a GSM carrier radio to it... nope!!)
if you plug it into the PC does the PC try to install some USB driver?

[email protected] said:
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
Click to expand...
Click to collapse
It is simple. You obviously have a CDMA device. It doesn't matter if you use it on a GSM network. Your device is and always will be a CDMA device. NEVER try to flash ANYTHING GSM on it or you run the risk of permanently bricking it.
To fix this, you will need to grad the latest ROM update from either HTC's website, or your carrier's website. Put the device into bootloader mode by holding down the power button and pressing the tiny reset button under the battery cover with your stylus. Once it boots into the tri-colored screen (bootloader), you can then run the ROM update utility that you just downloaded. This will restore everything back to stock settings and you can try again. If you have already done Hard SPL, then it will NOT be overwritten, so don't worry.

Update
I cannot get into the tri-colored screen (bootloader).
How long do I need to hold in the reset and power button?
More than 1 min?

[email protected] said:
I cannot get into the tri-colored screen (bootloader).
How long do I need to hold in the reset and power button?
More than 1 min?
Click to expand...
Click to collapse
You can't get there, because you're doing it wrong. You need to hold down the volume down button and then press the reset button once. This gets you into the bootloader.

Update
Holding down the volume down button and then pressing the reset button once, did not work for me.
How long do I hold the volume down button for?

[email protected] said:
Holding down the volume down button and then pressing the reset button once, did not work for me.
How long do I hold the volume down button for?
Click to expand...
Click to collapse
Do you have power in the device? You need to have a battery in it. Also, the reset button might not power your device on. If your device doesn't turn on when you press the reset button, then just hold the volume down button and press the power button once instead. That ought to do it.

Cant Turn On My Gnex!

today i got my usb port that i ordered from ebay and after i connected it, i try to turn my gnex on but i stucked on the cyanogenmod loading (rom)
after this i tried to enter the CWM, but i figured the volume buttons doesnt after i replaced the usb port (i probebly damaged it) and i dont know what to do, i cant enter the CMW or Odin Mode.. plz someone can help me to fix it???? :crying::crying::crying:

Vol rocker + Power button.
Or just follow the stickies in the general on flashing a factory build to correspond with your device.
Use the search in the future. This has been done to death.

063_XOBX said:
Vol rocker + Power button.
Or just follow the stickies in the general on flashing a factory build to correspond with your device.
Use the search in the future. This has been done to death.
Click to expand...
Click to collapse
can you expalin to me what i need to do? i didnt understand you..

http://forum.xda-developers.com/sho...laxy Nexus Guide (Unlock/Root/Flash Roms/FAQ)
Its really easy if you just make a little effort.

063_XOBX said:
http://forum.xda-developers.com/sho...laxy Nexus Guide (Unlock/Root/Flash Roms/FAQ)
Its really easy if you just make a little effort.
Click to expand...
Click to collapse
its possible to control my device when the phone is off or just on loading screen?
i think the computer dont recognize the device if its dont turn on..
you say i just need to conncet my phone to run the commands?

If you hold both volume buttons at the same time and push power while you're holding the other buttons, what screen comes up? If it shows an android with the words start in green, you can either follow the instructions he gave you or press volume down twice then power to enter recovery

t1.8matt said:
If you hold both volume buttons at the same time and push power while you're holding the other buttons, what screen comes up? If it shows an android with the words start in green, you can either follow the instructions he gave you or press volume down twice then power to enter recovery
Click to expand...
Click to collapse
the volume buttons doenst work at all..
when i push them and the power button the normal screen came up and then he stucks on the loading screen

hmm, you might have to look up how to do an OMAP flash then. i've never done it so i couldn't tell you how. see if anyone else can give you some insight into this before you do that though.

What you should do is open up your device again and fix those volume keys. This isn't a sw issue.
Sent from my Nexus

[Q] Galaxy Note II Bricked, But RED Flash Once When Power On

Hello everybody....
I have a note II today frommy friend, It was bricked. He said it was hang and then he pull out the batetry then it get brick.
When i push the power button i get red flash once. i have try triangle method but, it not difference.
How do i do now?

budi_ati said:
Hello everybody....
I have a note II today frommy friend, It was bricked. He said it was hang and then he pull out the batetry then it get brick.
When i push the power button i get red flash once. i have try triangle method but, it not difference.
How do i do now?
Click to expand...
Click to collapse
What do u mean by triangle method?u mean triangle away?what exactly you tried?

jdomadia said:
What do u mean by triangle method?u mean triangle away?what exactly you tried?
Click to expand...
Click to collapse
yeah i mean triangle way.
i haven't try it with ane method.
what method I should try???

budi_ati said:
yeah i mean triangle way.
i haven't try it with ane method.
what method I should try???
Click to expand...
Click to collapse
Mobile is booting up than only you can use triangle,triangle is for clear binary count,give more detail of mobile firmware version will help more,try to go in recovery press & hold VOL UP+HOME+POWER BUTTON,if you are able to go in recovery scroll down using volume button to factory reset & select yes to reset.

jdomadia said:
Mobile is booting up than only you can use triangle,triangle is for clear binary count,give more detail of mobile firmware version will help more,try to go in recovery press & hold VOL UP+HOME+POWER BUTTON,if you are able to go in recovery scroll down using volume button to factory reset & select yes to reset.
Click to expand...
Click to collapse
i dont have any information about this phone. cause when i received it was brick.
hold VOL UP+HOME+POWER BUTTON it dont work for me. it just red flash once.
i was plugin to computer, but it dont have any respond from computer (i mean usb connected windows notification).
:crying::crying::crying::crying:

budi_ati said:
Hello everybody....
I have a note II today frommy friend, It was bricked. He said it was hang and then he pull out the batetry then it get brick.
When i push the power button i get red flash once. i have try triangle method but, it not difference.
How do i do now?
Click to expand...
Click to collapse
are u able to go in download mode VOLUME DOWN + HOME + POWER

budi_ati said:
i dont have any information about this phone. cause when i received it was brick.
hold VOL UP+HOME+POWER BUTTON it dont work for me. it just red flash once.
i was plugin to computer, but it dont have any respond from computer (i mean usb connected windows notification).
:crying::crying::crying::crying:
Click to expand...
Click to collapse
1st of all make sure battery is fine or no,also try to go in download mode by press & hold volume down+home+power,post information what you read in download mode.

KaranBhoir said:
are u able to go in download mode VOLUME DOWN + HOME + POWER
Click to expand...
Click to collapse
jdomadia said:
1st of all make sure battery is fine or no,also try to go in download mode by press & hold volume down+home+power,post information what you read in download mode.
Click to expand...
Click to collapse
VOLUME DOWN + HOME + POWER also not working.
battery is fine.
sorry for my bad english :angel::angel::angel:

budi_ati said:
VOLUME DOWN + HOME + POWER also not working.
battery is fine.
sorry for my bad english :angel::angel::angel:
Click to expand...
Click to collapse
Tack it to service centre.

jdomadia said:
Tack it to service centre.
Click to expand...
Click to collapse
Ehmmmmmm..... :crying::crying::crying::crying:
It was no have warranty since 1st buy. cause not from official samsung store.
needed help

budi_ati said:
Ehmmmmmm..... :crying::crying::crying::crying:
It was no have warranty since 1st buy. cause not from official samsung store.
needed help
Click to expand...
Click to collapse
Sorry for that but looks power supply to motherboard is not there,may water gone inside or something else,If it's SDS then you will be able to go in Download mode.

I had the same problem, I also wasn't able to go to download mode it that's the same for you, you should sent it back to Samsung directly. If you don't have warranty left the will probably chage you something but still better than throwing it away

[Q] issues with volume keys

hey gyz,im in a huge problem.. i've got myself one used desire hd but the problem is that the volume keys r internally damaged..but im interested in flashing custom roms for which i got to know that ,the key combination to recovery mode includes power + volume down in DHD.. i've some plans to cope with it,donno it will work or not
1.edit the generic.kl n replace the volume down's code with the 'search' key's code..
2. let me know if i an use flashtools to flash a firmware without having DHD powered with the battery?.. i mean just like other mtk phones..can i flash a firmware after removing the battery which not also include vloume button issue..?
*is there any way , to fix my volume keys?* plz gyz..help me out

An app called quick reboot can avoid power button hold to certain boots..recovery twrp 2.7.1 is all touch. No volume keys needed to flash Roms and etc

marknoll said:
An app called quick reboot can avoid power button hold to certain boots..recovery twrp 2.7.1 is all touch. No volume keys needed to flash Roms and etc
Click to expand...
Click to collapse
tanx for ur reply bro.. i knew abt those, but is it safe to just have a nandrod backup? i mean in case of hard bricks due to flashing a rom(maybe kernel related misuse), the simple restore of the backup may not boot up device..,as far i know..
btw.. plz gimme the procedure to get root n twrp for my device having no risk of even soft brick/bootloop..
im using stock 2.3.5 in ma desire hd

A hard brick?? If u hard brick, a back up won't do ya any good. Lol. But yeah, always do a back up. Reboot to boot loader and type fastboot get var all. We need to see your specs. Post outcome plz