today i got my usb port that i ordered from ebay and after i connected it, i try to turn my gnex on but i stucked on the cyanogenmod loading (rom)
after this i tried to enter the CWM, but i figured the volume buttons doesnt after i replaced the usb port (i probebly damaged it) and i dont know what to do, i cant enter the CMW or Odin Mode.. plz someone can help me to fix it???? :crying::crying::crying:
Vol rocker + Power button.
Or just follow the stickies in the general on flashing a factory build to correspond with your device.
Use the search in the future. This has been done to death.
063_XOBX said:
Vol rocker + Power button.
Or just follow the stickies in the general on flashing a factory build to correspond with your device.
Use the search in the future. This has been done to death.
Click to expand...
Click to collapse
can you expalin to me what i need to do? i didnt understand you..
http://forum.xda-developers.com/sho...laxy Nexus Guide (Unlock/Root/Flash Roms/FAQ)
Its really easy if you just make a little effort.
063_XOBX said:
http://forum.xda-developers.com/sho...laxy Nexus Guide (Unlock/Root/Flash Roms/FAQ)
Its really easy if you just make a little effort.
Click to expand...
Click to collapse
its possible to control my device when the phone is off or just on loading screen?
i think the computer dont recognize the device if its dont turn on..
you say i just need to conncet my phone to run the commands?
If you hold both volume buttons at the same time and push power while you're holding the other buttons, what screen comes up? If it shows an android with the words start in green, you can either follow the instructions he gave you or press volume down twice then power to enter recovery
t1.8matt said:
If you hold both volume buttons at the same time and push power while you're holding the other buttons, what screen comes up? If it shows an android with the words start in green, you can either follow the instructions he gave you or press volume down twice then power to enter recovery
Click to expand...
Click to collapse
the volume buttons doenst work at all..
when i push them and the power button the normal screen came up and then he stucks on the loading screen
hmm, you might have to look up how to do an OMAP flash then. i've never done it so i couldn't tell you how. see if anyone else can give you some insight into this before you do that though.
What you should do is open up your device again and fix those volume keys. This isn't a sw issue.
Sent from my Nexus
Related
I am think about trying some different ROMs on my phone and I wanted to be sure I could get into Download Mode before I tried any Flashing. Can someone point me to directions how to find out if I can get into this Mode before I try any thing else. I have AT&T Captivate if that matters.
Thanks
RonH54 said:
I am think about trying some different ROMs on my phone and I wanted to be sure I could get into Download Mode before I tried any Flashing. Can someone point me to directions how to find out if I can get into this Mode before I try any thing else. I have AT&T Captivate if that matters.
Thanks
Click to expand...
Click to collapse
i think its pressing the Volume up and down when you power it on, you could try google tho
You do it by holding down the volume up and down keys while the phone is off and plugged into your computer after the download screen comes up you can release the buttons , thats how I did it for odin after I bricked my phone. I also just tested it.
Everything I have read and works for me personally, hold both volume buttons then plug in the usb cable with odin already running on your computer. Also, you will need to know how to boot into recovery. If your phone has 3 button recovery, hold both volume buttons, then press and hold the power button while still holding the volume buttons. Hold all 3 buttons until you see the at&t screen the second time and release all the buttons and you will enter recovery mode.
Download Mode
Hello,
Can anyone here please help me determin the method used to activate Download Mode for the LG VS750 (Fathom)?
All I can find over at gsmhosting is for the older units.
Also, still looking for a solution for cooking a ROM for this unit.
Thanks to everyone.
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
[email protected] said:
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
Click to expand...
Click to collapse
is your phone a gsm rhodium or does it have a cdma module too?
Both I believe
This happened to me last night. I reflashed the ROM to fix it. I used MightROM which is FRIGGIN' Awesome if you ask me
In order to do that though you need to be CID unlocked though but basically as long as you are in the bootloader/bios then you can flash the new ROM from your PC via the USB. If you need any links to that stuff I can post, but I am not quite sure if this would be part of XDA or not (Is MightROM xda? Idk? PPCGeeks??)
You can also try holding down the Call answer and Call end buttons at the same time with the power button then put your battery in. This didn't work for me though, but I had to do this anyways after I flashed the ROM so it might work.
edit: Sorry I misread. I am not sure about the Black Screen. Might work though. I was in the bootloader/tricolor to reflash. Maybe your LCD is dead or something for all I know. Sorry Mate.
[email protected] said:
Both I believe
Click to expand...
Click to collapse
oh god then you flashed a GSM radio to a CDMA worldphone (just because it has a GSM module doesn't mean you can flash a GSM carrier radio to it... nope!!)
if you plug it into the PC does the PC try to install some USB driver?
[email protected] said:
BAD Flash when updating radios, who can I pay to fix this?
Or anyone know of a way to fix this?
It appears to be bricked
When I flashed the ATT_Radio_Rhodium_4.48.25.95, I didn't rename it to RUU_Signed
Now I get nothing when I restart the phone, just a black screen.
Click to expand...
Click to collapse
It is simple. You obviously have a CDMA device. It doesn't matter if you use it on a GSM network. Your device is and always will be a CDMA device. NEVER try to flash ANYTHING GSM on it or you run the risk of permanently bricking it.
To fix this, you will need to grad the latest ROM update from either HTC's website, or your carrier's website. Put the device into bootloader mode by holding down the power button and pressing the tiny reset button under the battery cover with your stylus. Once it boots into the tri-colored screen (bootloader), you can then run the ROM update utility that you just downloaded. This will restore everything back to stock settings and you can try again. If you have already done Hard SPL, then it will NOT be overwritten, so don't worry.
Update
I cannot get into the tri-colored screen (bootloader).
How long do I need to hold in the reset and power button?
More than 1 min?
[email protected] said:
I cannot get into the tri-colored screen (bootloader).
How long do I need to hold in the reset and power button?
More than 1 min?
Click to expand...
Click to collapse
You can't get there, because you're doing it wrong. You need to hold down the volume down button and then press the reset button once. This gets you into the bootloader.
Update
Holding down the volume down button and then pressing the reset button once, did not work for me.
How long do I hold the volume down button for?
[email protected] said:
Holding down the volume down button and then pressing the reset button once, did not work for me.
How long do I hold the volume down button for?
Click to expand...
Click to collapse
Do you have power in the device? You need to have a battery in it. Also, the reset button might not power your device on. If your device doesn't turn on when you press the reset button, then just hold the volume down button and press the power button once instead. That ought to do it.
Hey guys, I've bought a galaxy s2 (t-mobile) and tried to root it. I held the vol up and down button while holding the power button, got into "press up to continue, down to cancel" screen, but I keep pressing up and nothing happens?!
The volume up button does work when the phone is on and I can make the ringer louder, but not during the download mode. Is there a fix?
mazine16 said:
Hey guys, I've bought a galaxy s2 (t-mobile) and tried to root it. I held the vol up and down button while holding the power button, got into "press up to continue, down to cancel" screen, but I keep pressing up and nothing happens?!
The volume up button does work when the phone is on and I can make the ringer louder, but not during the download mode. Is there a fix?
Click to expand...
Click to collapse
are you trying to get into download/odin mode? if so you hold up/down and insert the usb cable while still holding down the up/down. I didn't think power button was involved in the matter but maybe there are 2 ways. Anyhow, try that maybe it'll work.. Did you update the phone to ics thru kies yet? Maybe that flash could do something helpful..
VoiD_Dweller said:
are you trying to get into download/odin mode? if so you hold up/down and insert the usb cable while still holding down the up/down. I didn't think power button was involved in the matter but maybe there are 2 ways. Anyhow, try that maybe it'll work.. Did you update the phone to ics thru kies yet? Maybe that flash could do something helpful..
Click to expand...
Click to collapse
Sorry, I did mean that with the holding up/down button and USB cable. I am trying to get into download/odin mode. But I only get to the screen where it says to push volume up to continue, or down to cancel. It is the right screen, I just cant push up, nothing happens...
Also, I did not try to update the phone to ics thru kies yet. How do I do that?? You mean the regular software update in the settings menu?
mazine16 said:
Sorry, I did mean that with the holding up/down button and USB cable. I am trying to get into download/odin mode. But I only get to the screen where it says to push volume up to continue, or down to cancel. It is the right screen, I just cant push up, nothing happens...
Also, I did not try to update the phone to ics thru kies yet. How do I do that?? You mean the regular software update in the settings menu?
Click to expand...
Click to collapse
Go download kies from their website and let it firmware update..
Sent from my SGH-T989 using Tapatalk 2
VoiD_Dweller said:
Go download kies from their website and let it firmware update..
Sent from my SGH-T989 using Tapatalk 2
Click to expand...
Click to collapse
Ok, so I updated to 4.0.3 via Kies and now have ICS on the phone. I tried booting into odin/download mode, and once I'm in the warning screen "A custom OS can cause critical.....bla bla bla.....Volume Up: Continue, Volume down: Cancel (restart phone), the volume up button does NOT work and still seems disabled.
The button itself (up button) is not broken, as it works when the phone is on to make the ringer louder.
Any other ideas? I'm really confused why it won't work ??
Anyone? Any help would be great
same problem here
If u can get into recovery mode and r using cmw hit both up/down buttons at the same time. Ill take a thumb and place it in the middle of the buttons then push them (dont hold them tap them) after doing this itll say something like rockers disabled or something like that. When I used cmw Ive done that a few times and didnt know it and when in cwm I couldnt use the volume buttons anymore to make a selection. Do this to enable the buttons in recovery mode I never noticed if it only took effect in both modes or just in recovery mode but its worth a shot.
Sent from my SGH-T989 using xda app-developers app
hi, I have the same problem here and I cannot fix what to do... any ideas?
Even I too have a galaxy on 7 with broken button, but i can use 'adb reboot download ' command to get into it but to make it work developer option should be enabled, but for me i dont have any rom in it I'm stuck in a puzzle what to do ? Any one help, please
I was looking for an old phone to replace my note 3 until i got it fixed and found my mom's old note 2. I was gonna factory restore it, but my mom has forgotten her code and the power button is broken. I can get the phone turned on just fine using the charger. Are there any other ways to reset the phone or just bypass the lock screen?
Unplug Note 2 from charger
Power Off Note 2
Press and HOLD Volume Up & Menu & Power until it prompts to the recovery. .
I havent used the factory recovery in a long time so there might be another screen that will ask you what you would like to do. Just choose Recovery..
To navigate you have to use the Up and Down Vol buttons. (This im not to sure of because I haven't used it in so long)
Double0EK said:
Unplug Note 2 from charger
Power Off Note 2
Press and HOLD Volume Up & Menu & Power until it prompts to the recovery. .
I havent used the factory recovery in a long time so there might be another screen that will ask you what you would like to do. Just choose Recovery..
To navigate you have to use the Up and Down Vol buttons. (This im not to sure of because I haven't used it in so long)
Click to expand...
Click to collapse
thank you, but i know about that method. the problem is that the power button is broken. is there any sort of work around?
Do you know if ADB Debugging is turned on. If so you may be able to do this from ADB with or Kies on your Computer.. I know you can on nexus devices.....
ikepack said:
thank you, but i know about that method. the problem is that the power button is broken. is there any sort of work around?
Click to expand...
Click to collapse
Sorry Didn't see (or read properly) that the power button was broken...
Hi! I need help, I cannot go into recovery mode on my Zenfone 2 ZE551ML 64GB model. I have tried the obvious way i.e., Power Button + Volume Up at the same time, it does boot up doing so but don't go to the Bootloader from where I can go to the Recovery mode. I did gave my phone in servicing because in an accident I ended up breaking it's MIC and my bike :crying:. Anyways am I doing something wrong here. Please help.
DivyaMamgai said:
Hi! I need help, I cannot go into recovery mode on my Zenfone 2 ZE551ML 64GB model. I have tried the obvious way i.e., Power Button + Volume Up at the same time, it does boot up doing so but don't go to the Bootloader from where I can go to the Recovery mode. I did gave my phone in servicing because in an accident I ended up breaking it's MIC and my bike :crying:. Anyways am I doing something wrong here. Please help.
Click to expand...
Click to collapse
Hahaha you did it in the wrong way...
first... you need to hold down power + volume up button..
release power button after your phone vibrates two times (but still hold volume up button)
once you see "ASUS" boot up, realese the volume up button...
after that you will see fastboot gui where you can see "NORMAL BOOT" click volume down until you see "REVOVERY MODE" then click power button..
after that your phone will reboot and you'll see sleeping robot and ERROR message, if you see that just click volume up button then power button (you need to do it fast) then release power button, keep trying until you enter the recovery mode (volume up, power button, realese power button)
hope this will help you
IW4N93 said:
Hahaha you did it in the wrong way...
first... you need to hold down power + volume up button..
release power button after your phone vibrates two times (but still hold volume up button)
once you see "ASUS" boot up, realese the volume up button...
after that you will see fastboot gui where you can see "NORMAL BOOT" click volume down until you see "REVOVERY MODE" then click power button..
after that your phone will reboot and you'll see sleeping robot and ERROR message, if you see that just click volume up button then power button (you need to do it fast) then release power button, keep trying until you enter the recovery mode (volume up, power button, realese power button)
hope this will help you
Click to expand...
Click to collapse
Thanks for the help. Don't know why it's so complicated.:silly:
DivyaMamgai said:
Thanks for the help. Don't know why it's so complicated.:silly:
Click to expand...
Click to collapse
Hahaha is your problem solved?
DivyaMamgai said:
Thanks for the help. Don't know why it's so complicated.:silly:
Click to expand...
Click to collapse
Because it can be....:silly:
ultramag69 said:
Because it can be....:silly:
Click to expand...
Click to collapse
good to hear that Bro
IW4N93 said:
Hahaha is your problem solved?
Click to expand...
Click to collapse
Yeah it's done. Thanks.
DivyaMamgai said:
Yeah it's done. Thanks.
Click to expand...
Click to collapse
you are welcome
ultramag69 said:
Because it can be....:silly:
Click to expand...
Click to collapse
I think after unlocking bootloader and flashing custom recovery and kernel would make life so much simpler.
You'd think that, yes but as the expression goes, "you make plans and life happens"...
Besides, if everything went right Murphy would be out of a job... (if that is a bit cryptic it refers to Murphy's Law - "What can go wrong will go wrong", I like to add the amendment, "at the worst possible time"...)
It's a bit poetic I think...
Hi, is there any other solution to go into recovery with some app and no hardware buttons?
mrobo said:
Hi, is there any other solution to go into recovery with some app and no hardware buttons?
Click to expand...
Click to collapse
I use quick reboot but you need to be rooted. You may need to press power and up button if you get the droid with "error" underneath...
Hi I am try your way properly .............. but after tow vibrate I relies power button and hold down volume up but may phone still boot up with usb logo and after few second display is shutdown ........nothing will happened ...........please give me advice what will I do now
sajubayer said:
Hi I am try your way properly .............. but after tow vibrate I relies power button and hold down volume up but may phone still boot up with usb logo and after few second display is shutdown ........nothing will happened ...........please give me advice what will I do now
Click to expand...
Click to collapse
Where did you buy your device from?