Develop Bugs

after used Vogue_unlocker_MFG_2.31,i can't open my phone

after used "Vogue_unlocker_MFG_2.31",i can't open my phone now
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF ,
but after several second ,my 6900 can't open and i also can't load bootlooder mode
\
who can help me ?

yyqk2007321 said:
after used "Vogue_unlocker_MFG_2.31",i can't open my phone now
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF ,
but after several second ,my 6900 can't open and i also can't load bootlooder mode
\
who can help me ?
Click to expand...
Click to collapse
i take it you followed this tutorial to the letter and posted at ppcgeeks for help?
http://forum.ppcgeeks.com/showthread.php?t=24979
and give us some details!

mines bricked too but i followed the instructions on this site now i'm bricked ,man i wish i would had that link earlier.

bigpearl said:
mines bricked too but i followed the instructions on this site now i'm bricked ,man i wish i would had that link earlier.
Click to expand...
Click to collapse
what exactly do you mean bricked? details
can you still enter the bootloader? and if so, what are the numbers shown there?

it wont even boot ,but when you plug in usb it has a red light where the speaker is

bigpearl said:
it wont even boot ,but when you plug in usb it has a red light where the speaker is
Click to expand...
Click to collapse
Check this post on the PPCGeeks Forum. You will need your original 512 SD card that came with the phone and a card reader for your computer. I bricked my phone trying to upgrade the 3.xxx ROMs and that post fixed everything.

my phone wont boot at all.

bigpearl said:
my phone wont boot at all.
Click to expand...
Click to collapse
So you ARE saying you can't even enter bootloader mode?
POWER+CAMERA+SOFT RESET

bigpearl said:
my phone wont boot at all.
Click to expand...
Click to collapse
ya like champ said, we really just need to know if you can enter the bootloader right now. if you dont understand what we mean, let us know. we need more details.

jim256 said:
ya like champ said, we really just need to know if you can enter the bootloader right now. if you dont understand what we mean, let us know. we need more details.
Click to expand...
Click to collapse
LOL! I guess we'll never know, he hasn't responded, already been two days! I can't go more than a few hours without my Touch fully up and running !

TheChampJT said:
LOL! I guess we'll never know, he hasn't responded, already been two days! I can't go more than a few hours without my Touch fully up and running !
Click to expand...
Click to collapse
lol ya, know where you're coming from there!

nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.

bigpearl said:
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
Click to expand...
Click to collapse
I bricked my phone when upgrading the to the new radio and I COULD NOT boot. The link I posted showed how to boot directly into the Bootloader with a SD card formatted to Fat32, so that I could then re-run the Coke's SPL.
Again I couldn't boot. I didn't get anything on the screen, only the LED stuck on RED.

Yeah, I had that too. Fortunately, I had a warranty and was able to get a free replacement, but it was very annoying

bigpearl said:
nope no boot at all,only signs of life i get i when i put the usb charger in and a red light comes on in the speaker,sorry for the delay.
Click to expand...
Click to collapse
have you tried giving jack's tip a shot? i have heard of/seen that work for a lot of ppl. im not sure if it requires the original 512mb card, but i suppose it couldnt hurt. just ensure its formatted fat32!
let us know what happens.

im about to try it jack ,wish me luck

i tried it still cant get the phone to do anything,

bigpearl said:
i tried it still cant get the phone to do anything,
Click to expand...
Click to collapse
try asking imcokeman.
so when the phone is just sitting there, and you poke the reset hole, what happens?
also, what happens when you try the power camera reset? when you HOLD the power button, the camera button, then poke the reset hole and you dont let go till something comes up??

yyqk2007321 said:
i take the spl-2.31 ,and t changed the RUU_signed.nbh to VOGUIMG.nbh ,copy it to my TF
Click to expand...
Click to collapse
Uhhhh.....I just read over the first post to remember the situation, and found this bit in your orignal post, correct me if I'm wrong, I hope you know jim, but I don't think you were supposed to change the .nbh file at all.

this picture is how my phone looks ,this is all it that it does.

Please Help, My HTC s620 went dead after a failed rom update.

any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.

bootrecord said:
any one please could advise what happened and how to fix it?!!!
i've tried to update my s620 with
RUU_Excalibur_ROGERS_WWE_1.30.631.2_4.1.13.47_02.98.90_Ship.exe
found in this forum, the update went till 3% only and the device turned itself off, and won't turnd on again when i press the power, although the battery is full.
any ideas please??
thanks in advance.
Click to expand...
Click to collapse
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.

roloracer said:
Hmm! I't might not work since it did'nt update ,but try hard reset , and if that doen't work you might have to go the bootloader way.
Click to expand...
Click to collapse
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway

bootrecord said:
am not too much to what you said,
could you please explain the hard reset process & the bootloader way process.
thanks anyway
Click to expand...
Click to collapse
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0

roloracer said:
Try hard reset first. http://forum.xda-developers.com/showpost.php?p=3263295&postcount=4
Bootloader http://forum.xda-developers.com/showpost.php?p=2191093&postcount=16
Now on bootloader you can only use your official 6.0 rom from Rogers . You can get it here.http://forum.xda-developers.com/showthread.php?t=381726
Scroll down to see Rogers 6.0
Click to expand...
Click to collapse
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??

bootrecord said:
thanks,
there is no responce in anyway, i mean for the hard reset process, even when i connect it to the power supply -e.g. for charging- there is no leds turned on.
on the other hand, the Rogers ROM is the one that i tried to upgrade with; and it stuck at 3% then turned dead.
now it is with no power sign of any.
any further suggestions please??
Click to expand...
Click to collapse
Take your battery out for a bit and try again "not promissing anything but sometimes can help"

stylez said:
Take your battery out for a bit and try again "not promissing anything but sometimes can help"
Click to expand...
Click to collapse
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.

bootrecord said:
still the same; Dead.
thanks anyway.
there is no power in it,
as i mentioned before, even when i plug it to the charger, it remains the same: no leds, no power whatsoever.
any further sugestions please.
Click to expand...
Click to collapse
sorry it sounds like you have a fancy paper weight! Bricked!!

What to do now ?

Hi,
I tried to load a HardSPL on my Diamond but it went wrong somehow.
My Diamond was stuck at 75% and everything went blank.
Now I can't power it up and even if I put in the power supply doesn't lid up the light of charging.
Is it dead? Can I throw it away? Or is there something I can do ?
THX

may sound stupid but have you tried to remove the battery

Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html

1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick

karlanal said:
may sound stupid but have you tried to remove the battery
Click to expand...
Click to collapse
Yes nothing

nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
Nope, nothing

solidpowder said:
Did you tried a hard reset ??
http://www.hardreset.eu/htc_touch_diamond_hard_reset_soft_reset_en.html
Click to expand...
Click to collapse
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.

lmdiablo said:
Yes I know this one, my device doesn't go on, nothing.
Doesn't respond on anything.
Click to expand...
Click to collapse
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?

solidpowder said:
can you test your battery ?
or your power cable ?
during the update of the hard spl, did you have enough battery ?
Click to expand...
Click to collapse
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5

lmdiablo said:
Before the update everything was working fine, I neder had any problems with it.
Battery is/was Full charged
I now the drills, I also did it with my XDA 7500 HTC and that wen ok.
I just only wanted to put on win 6.5
Click to expand...
Click to collapse
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader

solidpowder said:
maybe try to remove the batery for a long time (couple of hours) and then try again to go to the bootloader
Click to expand...
Click to collapse
Nope didn't work, Battery was out for 6 hours...

So has anyone any a good tip or should I trough it in the garbage

can you try with an other battery cell ?

solidpowder said:
can you try with an other battery cell ?
Click to expand...
Click to collapse
Already did, my friend has the same device.
Still doesn't do anything.
It's really dead.

nickislauw said:
1. download a new rom
2. put your vol down + soft reset button (or power button).
you should come in a color screen?
3. now start customRUU and let is flash.
4. Voila ur device is recovered
//Nick
Click to expand...
Click to collapse
lmdiablo said:
Nope, nothing
Click to expand...
Click to collapse
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?

ciao99 said:
if you have not completed the hard spl you are not able to flash any new rom...it runs if you press reset + vol down + back at least?
Click to expand...
Click to collapse
No, it doesn't do anything.
No power up
Doesn't charge.
Nothing.

How old is your device? Diamond was launched in may 2008 so a big change it isn't older then 2 years. In europe HTC devices come standard with a 24 months warranty.
You could send it in for repair in that case, and since the device isn't booting at all, the changes HTC detects that it died during a 'warranty destroying' procedure are not that big. And if they do they will contact you prior to actual repairing/making costs.
Before throwing it away you could give this a try, nothing to loose huh?

Vibrates 7 times

I just rooted my HTC Desire and installed CM7 on it (loved it on my HTC Legend). But suddenly today, after I turned Wifi on, it started rebooting all the time, couldn't do anything to stop it. I thought "Hey, there was the radio flash thing in the tutorial that I didn't do yet, I'll try that out" so I flashed the radio. Then I chose reboot system, but it just booted to a logo with an android coming out of a trash can, and looked kinda stuck there. So I took out the battery and plugged back in. Now if I try to turn it on, it'll just vibrate 7 times - no picture or anything. Also there's no LED when I plug it to the charger.

I had those 7 vibrates too.
Happened after i flashed the cm7 hboot over my stock hboot while trying to enter recovery. After i re-flashed my recovery using fastboot, everything worked again. What happens if you try to power up while holding down vol- ? Did you use fastboot or your phones recovery mode to install the radio?

I am not able to start in recovery or anything. I tried vol. down + power and back + power and no matter what I try, it just vibrates 7 times. I used the recovery mode to install the radio.

You could try to connect your phone via usb and check if fastboot discovers your device. If yes, flash hboot and recovery using fastboot. If not, well... i dont have a clue. Sorry :/

Computer discovers nothing when I plug in the phone.

Bad news when u pulled battery u interrupt the process n u now have a bricked device I would b very surprised if u managed to do anything
Pulling battery when doin a radio update is a BIG NO NO I'm sorry but ur stuck with a 400+ mirror now
Please look at this link
http://www.google.co.uk/m/search?site=images&client=ms-android-htc&hl=en&gl=uk&source=mog&aq=&oq=&aqi=&fkt=&fsdt=&cqt=&rst=&htf=&his=&maction=&q=android+radio+update#i=95
If that the image u saw when u pulled battery ur defo screwed
The Best Things Come To Those Who Wait

Your link doesn't work.. I found a picture of what was showing when I unplugged the battery, but I'm not allowed to post links to other sites on these forums yet.

U need to copy the link for some reason its not showing up
Pm the link u have
The Best Things Come To Those Who Wait

Inrego said:
Your link doesn't work.. I found a picture of what was showing when I unplugged the battery, but I'm not allowed to post links to other sites on these forums yet.
Click to expand...
Click to collapse
inrego
yes the image u just sent me is correct
the image showing would of ment it was installing the radio and because u pulled battery u have corrupt the flash and unfortuntly bricked ur device
i will look for a solution on the net but im not sure if ill find anythink sorrry

Inrego said:
Your link doesn't work.. I found a picture of what was showing when I unplugged the battery, but I'm not allowed to post links to other sites on these forums yet.
Click to expand...
Click to collapse
heres a few thread about some pulling battery on radio flash
http://android.modaco.com/content/g...m/304368/can-the-nexus-one-be-bricked/#entry0
http://android.modaco.com/content/h...50/help-cannot-turn-on-after-flash-new-radio/
i cant find anythink about fixin the issue sorry

Well thanks alot for trying. At least it seems like it shouldn't be too hard to get a replacement unit..

Inrego said:
Well thanks alot for trying. At least it seems like it shouldn't be too hard to get a replacement unit..
Click to expand...
Click to collapse
all depends on if ur on warranty if u have receipt and warranty then all is ok with out them u stuck basically
sorry couldn't help more hopefully lesson learnt playing with radio is risky business

Yea got warranty and reciept and all that, so np there

Inrego said:
Yea got warranty and reciept and all that, so np there
Click to expand...
Click to collapse
nice one then just make up a bull**** reason ok well hope u get a replacement

Wait a minute...
Inrego said:
Well thanks alot for trying. At least it seems like it shouldn't be too hard to get a replacement unit..
Click to expand...
Click to collapse
For the record to help some of you out who ended up here Googling: I had a similar issue. My HTC Desire SV did not boot, and when charging, only had an orange flashing light, and the phone vibrated 7 times. I did 2 things that got it back up:
1) left the phone off for say 10 minutes (I read about overheating issues in general, although the phone did not feel hot).
2) removed the battery for a couple of minutes.
VERY IMPORTANT: for step 2: make sure to have the battery removed long enough to drain internal charge. I removed and installed the battery in a second or so at first, and still the phone did not boot. After leaving out the battery long enough, it booted again. It appears to me that the issue in my case was a rather big internal charge capacity which kept internal state (memory and/or CPU?) from booting. Hope this helps...

Hard brick problem

I've a big problem... my phone won't turn on, won't charge (and no led) but is not totally dead.
The problem has happening after install TWRP with Autorec on V30B firmware, i reboot my phone and nothing... My phone won't reboot, just turn off.
Since, there is no vibration when i press start button, no DL mode when i connect to the PC (and hold volume up) but, sometimes i can see boot logo during 3 second and nothing anymore, just a black screen. When i remove the battery and i plug it, the phone shows me a logo which indicates the battery is removed.
I plug my phone during 10 minutes, but always nothing...
If someone can help me, i would be so gratefull

Used twrp for marshmallow or lollipop and your phone version is what?

Give this a try: http://open-freax.fr/guide-unbrick-your-lg-g3/
If that does not help I guess there is nothing you can do.

did you check that you have TWRP? Try to enter recovery since you can see the logo and you certainly flashed recovery. Main thing is that you flashed wrong boot and can not boot system.
Check this post from autoprime.
http://forum.xda-developers.com/showpost.php?p=64626209&postcount=529

Thank you very much for your help. Your link @two_handed was very helpfull

Silver Wx said:
Thank you very much for your help. Your link @two_handed was very helpfull
Click to expand...
Click to collapse
Have you been successful? It helped me with my Soft/Hardbrick.

two_handed said:
Have you been successful? It helped me with my Soft/Hardbrick.
Click to expand...
Click to collapse
Yes ! Tanks again

Silver Wx said:
Yes ! Tanks again
Click to expand...
Click to collapse
Does that method keep the internal memory files? pictures etc?
My g3 is fully bricked and i just want the files!

Ray1000 said:
Does that method keep the internal memory files? pictures etc?
My g3 is fully bricked and i just want the files!
Click to expand...
Click to collapse
Nope , internal memory will be erased..