easily works on sense roms,but how can i dial ##3282# on non-sense roms?
i need to do the streaming fix
You will have to flash back to a sense rom to be able to do it. As of now, no way to call it from an aosp. I know kushdeck said he was working on a way to get it done tho.
SayWhat10 said:
easily works on sense roms,but how can i dial ##3282# on non-sense roms?
i need to do the streaming fix
Click to expand...
Click to collapse
As of right now, it is not possible. EPST has to be incorporated into AOSP which is being done right now by Deck. He has been slowly implementing it into his roms but it isn't working as of yet. You will have to flash back to Sense then back to your AOSP.
Can only be done on a sense rom because off the epst. do a nandroid backup of what you got, flash a sense rom, do your fix, and restore..
Edit. Wow third response, definitely need to master this swype a little more
hey ive read you guys replies, thanks
but im coming from a sense rom, and i did the ##3282# fix prior
but when i flashed cm7 it seemed to not be working
but i'l give it a shot (will nandroid, then flash sense,do the fix,and flash back)
i hope it sticks....
Download GPS Status from the market, let it update data and you'll be fine... hopefully
HipKat said:
Download GPS Status from the market, let it update data and you'll be fine... hopefully
Click to expand...
Click to collapse
what exactly do you mean when you say let it update data? just run the program and it'll update automatically? or do i have to select an option?
For future reference, ##3282# is not for the GPS, it's for Data Profile Restore. ##4772579# is the code for GPSCLRX.
Sunsparc said:
For future reference, ##3282# is not for the GPS, it's for Data Profile Restore. ##4772579# is the code for GPSCLRX.
Click to expand...
Click to collapse
im aware of this
im not looking for a GPS fix
however the other guy said the GPS program will do the streamin fix
im willing to try whatever
Related
Hey guys, I need a bit of help. I have been using CM7 since build 0, and have been having hte GPS lock issue as everyone else has. I finally got around to going back to a sense ROM to clear the gps using ##GPSCLRX#. When I put that in it asked for the password (MSL code) and I accidentally hit ok, finger slipped. It said password incorrect and I'm not sure if it cleared the GPS or not. I tried to do it again, but when I type in ##GPSCLRX# it just disappears and the password window doesn't come up anymore.
I tried going back to CM7 and then back to a sense ROM, and I can't get that window to pop up again. My GPS still isn't locked consistently, just a quick lock every now and again, so I don't think the clear worked. I don't know how to clear it now.
I tried doing it on Myn's 2.2 and the stock ROM.
Today I did a full wipe and installed a fresh Myn's, and when I type in ##GPSCLRX# it still just disappears from the box, and it never prompts me for a password.
I would really love to get the GPS up and running, because other than that I love cm7. Appreciate the help. If someone can get my GPS up and running well I wouldn't mind donating a few dollars to a beer fund or whatnot.
CM7 RC1 is supposed to have the GPS issues cleared up.
Did you try a factory reset?
RC1 still does it.
I did a full wipe (data/cache/dalvik) when i installed Myn to do the clear, it still wasn't working.
Data wipe via clockwork is the same as factory reset, right?
Maybe this won't help, but you can try unrooting.
Any other suggestions?
Clear Data/Cache on the Dialer in Menu | Settings | Applications? Not sure what else this might muck with.
Kekoh said:
Hey guys, I need a bit of help. I have been using CM7 since build 0, and have been having hte GPS lock issue as everyone else has. I finally got around to going back to a sense ROM to clear the gps using ##GPSCLRX#. When I put that in it asked for the password (MSL code) and I accidentally hit ok, finger slipped. It said password incorrect and I'm not sure if it cleared the GPS or not. I tried to do it again, but when I type in ##GPSCLRX# it just disappears and the password window doesn't come up anymore.
I tried going back to CM7 and then back to a sense ROM, and I can't get that window to pop up again. My GPS still isn't locked consistently, just a quick lock every now and again, so I don't think the clear worked. I don't know how to clear it now.
I tried doing it on Myn's 2.2 and the stock ROM.
Today I did a full wipe and installed a fresh Myn's, and when I type in ##GPSCLRX# it still just disappears from the box, and it never prompts me for a password.
I would really love to get the GPS up and running, because other than that I love cm7. Appreciate the help. If someone can get my GPS up and running well I wouldn't mind donating a few dollars to a beer fund or whatnot.
Click to expand...
Click to collapse
flash back to frest rom.
copy the attached epst.apk using root explorer to /system/app
when it asks to overwrite accept then install it.
your ## codes should work again.
you can also install 'gps status and tools' and clear the data there
After I went s-on and ran the latest ruu, I had to reapply the GPS fix after I rooted and loaded cm7. I couldn't get the GPS fix to work in Caulkins 1.8. It would reboot and hang at the white evolution screen. I used a rooted copy of the latest stock Tom and everything worked great.
Sent from my PC36100 using XDA App
dtr145r said:
flash back to frest rom.
copy the attached epst.apk using root explorer to /system/app
when it asks to overwrite accept then install it.
your ## codes should work again.
you can also install 'gps status and tools' and clear the data there
Click to expand...
Click to collapse
This worked, however I still can't get the GPS to lock. :\
It seems like now I can't even get the GPS activate. If I turn GPS on the icon never comes on in the notification bar. It seems like its only trying to get a lock using the nearest tower or satellite or something.
EVO GPS not locking in GB 2.3
I did a little more research and it turns out that this is a common problem for anyone moving from 2.2 to 2.3 on evo. I found the fix by doing a GPSCLRX from my rooted stock sense rom.
0) Download the 2.3ROM and optional google apps to your sdcard; place it somewhere you can find them when in recovery
1) Download 'msl reader' from android market, run it and record your msl or call Sprint and beg for your msl number and record it for later.
2) ***MOST IMPORTANT PART*** you have to do this from a stock sense ROM. If you made a backup prior to your initial install of a custom ROM just restore it if not get stock ROM from: http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs
3) Once your stock ROM is up verify your GPS works and locks (GPS toolbox or Maps etc..)
4) With your GPS on; Open dialer and press ##GPSCLRX# or ##4772579#
3) When prompted for the password input your msl code from step 1
4) Phone will reboot in 20 seconds
5) Reboot into recover (power button + down volume)
6) Wipe everything and FLASH 2.3ROM + latest gapps
GPS works
singe0072 said:
I did a little more research and it turns out that this is a common problem for anyone moving from 2.2 to 2.3 on evo. I found the fix by doing a GPSCLRX from my rooted stock sense rom.
0) Download the 2.3ROM and optional google apps to your sdcard; place it somewhere you can find them when in recovery
1) Download 'msl reader' from android market, run it and record your msl or call Sprint and beg for your msl number and record it for later.
2) ***MOST IMPORTANT PART*** you have to do this from a stock sense ROM. If you made a backup prior to your initial install of a custom ROM just restore it if not get stock ROM from: http://forum.xda-developers.com/wiki/index.php?title=HTC_Supersonic/ROMs
3) Once your stock ROM is up verify your GPS works and locks (GPS toolbox or Maps etc..)
4) With your GPS on; Open dialer and press ##GPSCLRX# or ##4772579#
3) When prompted for the password input your msl code from step 1
4) Phone will reboot in 20 seconds
5) Reboot into recover (power button + down volume)
6) Wipe everything and FLASH 2.3ROM + latest gapps
GPS works
Click to expand...
Click to collapse
I'm having GPS issues as well. I tried a similar instructions yesterday except I didn't test my GPS when I restored my stock ROM and turn on GPS during GPSCLRX. If i back up my CM7 rc3 now before I try this again can i just use the restore feature again after unlocking GPS or do I have to wipe and manual flash?
** EDIT ** I'm new to this so I want to add that I'm using the SavagedZen Kernel. Do kernels affect GPS? I haven't read that it does but just wanted to add it to help troubleshooting. I restored to stock ROM and confirmed GPS is working. Hope this works...
Works like a charm! I struggled for hours trying to get it to work and then ran across this thread. Thanks a bunch!
Can anyone help?
I'm trying to follow the ##GPSCLRX# fix documented here. I flashed to a Fresh ROM to get Sense, and got my MSL code.
However when I dial ##4772579# the dialer just locks up (looks like a previous poster had the same issue).
I got around it by saving the number as a contact and dialing the contact.
The phone rings twice then says:
"The number or code you have dialed is incorrect. Please check the number or code and try again. Message 7, Switch 351."
I tried dialing the same number from a free alternate dial app, same response.
Any ideas? No GPS really sucks
(And yes, I have double- and triple-checked that I'm dialing the right number. And yes, Sprint is my carrier.)
Oh, and using the GPS Tools app: Tools -> "Manage A-GPS state" -> "Reset" didn't change anything.
crazedfred said:
Can anyone help?
I'm trying to follow the ##GPSCLRX# fix documented here. I flashed to a Fresh ROM to get Sense, and got my MSL code.
However when I dial ##4772579# the dialer just locks up (looks like a previous poster had the same issue).
I got around it by saving the number as a contact and dialing the contact.
The phone rings twice then says:
"The number or code you have dialed is incorrect. Please check the number or code and try again. Message 7, Switch 351."
I tried dialing the same number from a free alternate dial app, same response.
Any ideas? No GPS really sucks
(And yes, I have double- and triple-checked that I'm dialing the right number. And yes, Sprint is my carrier.)
Oh, and using the GPS Tools app: Tools -> "Manage A-GPS state" -> "Reset" didn't change anything.
Click to expand...
Click to collapse
crazedfred, I actually had the same problem today. I think it might have something to do with Fresh and not the method to fix it. I originally tried using fresh and encountered the same problem you're having.
Instead, I used Sprint Lovers as my Sense-ROM and followed the same instructions and everything worked out ok. If done correctly, you shouldn't have to dial ##4772579#. Once you input the last pound sign you should be prompted to enter the number from MSL Reader.
Just a note: When I did this today I started to have some data connection issues but I'm not entirely sure if they are related. I'll update if I can figure it out.
I've had these issues any time I moved from sense to aosp...I just flash to stock rooted, run ##gpsclrx#, enter msl and actually use the GPS after reboot...
Sent from my PC36100 using XDA Premium App
My Evo 3g speed is running really slow. I know its not my area, it is something wrong with me phone. It is slow rooted or unrooted. If anyone can help please let me know thanks
i've had poor data speeds lately as well.
Sprint EVO 4G
Kansas City
My 3g is slower then snail mail & 4G hangs. I'm on unlimited plan but I'm in a data roming area. I think Sprint is restricting my bandwidth..... Is it possible? And how can I fix it? I seen a tread about using cdm workshop.... What others do I need....
Update all radios. Check my sig for a link.
Flash a rooted Sense ROM, based on the Evo (this disqualifies MikG, Director's Cut, Synergy and other Sense 2.1 ROMs, because those are based on the Evo Shift (I've had issues with Shift-based ROMs not reprovisioning data). Update PRL. Reboot.
Go into EPST (Dial ##3282#, Choose edit mode), enter your MSL code (download and use MSL Reader from the Market to get it), Data Profile, hit the menu button and choose restore. Just sit there, your phone will reboot and everything will go back to default. Let it reprovision, but when it says "Updating PRL" hit cancel.
Wipe everything in recovery, flash ROM of your choice.
Use 3G Supercharger if you want.
More than likely not your phone, that's just Sprint's network for you. But you can try those things above to see if they do any good.
It is definitely not your phone, it IS the network. Sprint's network has sucked since last November or so. I travel across the country, and 95% of the time I cannot get above 50kbps on 3g, yes that's slower than dial-up.
tropicalbrit said:
Update all radios. Check my sig for a link.
Flash a rooted Sense ROM, based on the Evo (this disqualifies MikG, Director's Cut, Synergy and other Sense 2.1 ROMs, because those are based on the Evo Shift (I've had issues with Shift-based ROMs not reprovisioning data). Update PRL. Reboot.
Go into EPST (Dial ##3282#, Choose edit mode), enter your MSL code (download and use MSL Reader from the Market to get it), Data Profile, hit the menu button and choose restore. Just sit there, your phone will reboot and everything will go back to default. Let it reprovision, but when it says "Updating PRL" hit cancel.
Wipe everything in recovery, flash ROM of your choice.
Use 3G Supercharger if you want.
More than likely not your phone, that's just Sprint's network for you. But you can try those things above to see if they do any good.
Click to expand...
Click to collapse
I have a rooted Evo with Energy ROM 3.5 Sense Android V2.3.5, I have tried to do the steps but every time I enter the last # it does nothing. Is there another formula that I should try or is it due to the installation of the rom?
PointBlankChaos said:
I have a rooted Evo with Energy ROM 3.5 Sense Android V2.3.5, I have tried to do the steps but every time I enter the last # it does nothing. Is there another formula that I should try or is it due to the installation of the rom?
Click to expand...
Click to collapse
you need to flash the older 2.1 EPST first
sitlet said:
you need to flash the older 2.1 EPST first
Click to expand...
Click to collapse
Will that change anything with how it operates?
PointBlankChaos said:
Will that change anything with how it operates?
Click to expand...
Click to collapse
nope
10char
ok so i upgraded to 2.3 from this thread http://forum.xda-developers.com/showthread.php?t=1133379
and i also flashed the radios since i have done this i cant go to some websites like google wasnt working and my apps that use the net dont always work and i have no idea what to do please help thx
(Odexed and s off)
Heffaz said:
ok so i upgraded to 2.3 from this thread http://forum.xda-developers.com/showthread.php?t=1133379
and i also flashed the radios since i have done this i cant go to some websites like google wasnt working and my apps that use the net dont always work and i have no idea what to do please help thx
(Odexed and s off)
Click to expand...
Click to collapse
You could try the ##DATA# then Edit Mode, enter your MSL (you can get this by calling sprint OR getting the MSL Reader app on market), then go to Data Profile and then hit Restore. The phone will reprovision itself on reboot.
I suggest you re-wipe and re-flash the rom.
should i reflash the radio 2
ok so i reflashed the rom and i cant even go to google =/
Ok so its not the Rom I flashed a custom one and I can only go to some websites and some times netflix works and some time it doesn't so it has to be the radio how would I go about fixing this
Anyone have any ideas ?
Being that you're having connection issues, yes, re-flash the radios and depending on your rom, flash the newest radios.
posting & replying via my EVO 4G
yea still nto working should i try a older radio?
Heffaz said:
yea still nto working should i try a older radio?
Click to expand...
Click to collapse
Go for it. I would...
posting & replying via my EVO 4G
Hi All,
First time rooting and running custom ROMs so bear with me. Flashed CM 7.1 stable and when I try to go to google maps it cant find my location. Tried to flash the qualcomm 1.1 drivers but no success either. Tried applying those location configuration files for US that another thread suggested but no success either.
Anyone else successfully install the 7.1 stable and fix GPS issues?
Thanks for the help!
Hopefully, you made a nandroid of your stock setup, but you need to be in a Sense ROM, specifically a stock Sense ROM, d/l GPS Status and MSL Reader from the market, and run MSL Reader and get your MSL. Go to maps. Get a lock. Open GPS Status, get a lock.
Go to dialer and dial ##GPSCLRX#. Use the MSL for the password, your phone will reboot.
Open Maps and GPS Data again, and get your locks.
Go to Recovery, flash CM and then op0en maps and GPS Status again. You should have your locks
Yeah, basically flash (or nandroid restore) a backup of a sense ROM. Enter ##GPSCLRX# in the dialer and enter your msl code as the password. You can find your msl code through the market. Also use GPS status. Go to Google maps, get a lock on your location, restore your cm7 nandroid. This is the only thing that worked for me on cm7 but it seemed temporary, which is why I'm on MIUI now.
Sent from my PC36100 using XDA App
That's so cool that 2 1/2 hours after I posted it, you showed up to post the same thing...
HipKat said:
That's so cool that 2 1/2 hours after I posted it, you showed up to post the same thing...
Click to expand...
Click to collapse
Its the exact same! LOL
@op do the GPS fix zip after you do what hipkat posted. Its in the thread below. I think that makes it permanent
Having trouble with AOSP? http://forum.xda-developers.com/showthread.php?t=1295702
I left the page up for that long -,- lol so I didn't even see your post.
Sent from my RED XDA.
Hey, I'm running cm7 and I've been stuck on 1x for only god knows how long. I know there is 3g around because when I first got the phone it worked. After flashing different roms it seems to not want to connect to 3g anymore at all. Why is this?
Sent from my PC36100 using Tapatalk
call sprint and see if there is an outage
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Cares said:
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Click to expand...
Click to collapse
I think this may be my problem. I do roam sometimes when I never had before. What should I do in order to fix this?
I am pretty sure there isn't an outage because my friend on sprint has been tooling around on 3g.
I'm able to toggle between the 1x and 4g, but I can't connect to 3g. :-/
Sent from my PC36100 using Tapatalk
Bump.
I'm still having the same issue. Can anybody guide me through getting back to 3G? Would be much appreciated.
Sent from my PC36100 using Tapatalk
+1 .
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Seandeezy said:
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Click to expand...
Click to collapse
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
swagstr said:
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
Click to expand...
Click to collapse
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Seandeezy said:
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Eh.. I mighta been usin' Tiamat (this was like 4 mos ago).
This really works!
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
I have this problem occur on CM7 randomly as well. I just turn off mobile data for about 5 mins then turn it back on and it seems to fix the problem. Least till the next time.
mchristian said:
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
Click to expand...
Click to collapse
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Seandeezy said:
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Click to expand...
Click to collapse
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
mchristian said:
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
Click to expand...
Click to collapse
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Seandeezy said:
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Click to expand...
Click to collapse
Yeah, I was pulling my hair out too. Happy it worked for you.