Currently im trying to run the stock 3.70 deodeoxed. For some reason every sense rom i try to run I get wifi error when i try to turn the wifi on. AOSP roms work fine. Kinda wanted to get this fixed so I can sell it. Possiable evo3d in future. Thanks all.
That is very strange. Did wifi work for you before you rooted the device? If it did, when did you initially notice that wifi was not working properly? If it works for AOSP roms, it should work for Sense-based roms, as well. If you haven't done so, use amon_RA as your recovery, wipe EVERYTHING in the wipe menu Except the card and then flash the stock "odexed" rom from HERE.
posting & replying via the XDA Premium app.
Ill give it a try and let you know.Wifi works like a dream on cm7
Related
I justest loaded CM 6.1.2 on my HTC evo and now every time i try to use my camera it freezes and has to force close. Any idea's? I'm new at this whole phone moding thing, so if I left out any important info just tell me. I had someone who is more experienced help me root my phone and load the rom so I don't think I messed up anything there.
Hmmm...that's strange.....I had the CM on my phone, and didn't experience any camera issues. Are you using a custom kernel?
Have you tried clearing the data and cache from the camera and then opening the camera back up? (Settings/Applications/Manage Apps/Camera) This has helped others on certain roms. Not sure on CM though.
Also, agreed with the kernel thing from filmaker. Sometimes that will do it. Try a different one.
Good luck!
I'll try that, thanks. I loaded a different rom on my phone and I'm having some problems with it, I'll reload cm and try what you told me. As to the custom kernel question, I dont believe I do. I also read on the cm forum about CM6.1.2 having issues with the camera pm newer evos and they talked about a fix but I couldn't seem to find it.
Having sorta the same problem... I switched to CM6 and the camera is just buggie... It either wont take a picture, lags really bad or FC's... I've tried clearing the data out of it but that seems to have made it worse.... Any other idea people? Thanks
Oh, I'm runnin CM6 with a stock kernel... maybe try a different kernel? And if so, can I just flash a kernel without changin anything elese like radios and what not?
Well I reinstalled cm and the camera worked prefect for a while but its not working now. I tried what you said and it didn't work. I have the stock kernal as well.
Sent from my PC36100 using XDA App
hhhmm... that's prolly gonna be a deal breaker for me if I can't get it fixed... I use my phone camera quite a bit
Did you wipe data, cache, and dalvik between ROMs? How about system?
Well I know I wiped data, cache and dalvik... and I think I wiped system (If that's an option in to do from recovery then yeah I did)..
What recovery are you using and what rev? When I first tried CM6.1.2 I was using RomManger, which was using ClockWork 3.x.x.x recovery. I couldn't get CM6 to run for more than a day without having issues. I was able to switch to Amon_RA 2.2.1 and flash a few other ROMs which ran fine for days without any issues. I have since loaded up the EvoNonsense 4.3.1 ROM, which feels a lot like Cyanogen but still has Sense, so everything works (4G, HDMI, Camera/Camcorder, etc...). Anywho, not sure if using Amon_RA recovery will fix your Cyanogen issues or not but it may be worth a try. If that doesn't work out then you may want to try the EvoNonsense ROM.
http://forum.xda-developers.com/showthread.php?t=758197
This is my first thread here at xda
I don't know if this issue is already known or if it's just me with this problem. I have an HTC Evo and I've tried both Evervolv Roms for Android 2.3 http://forum.xda-developers.com/showthread.php?t=878020 and 2.2 http://forum.xda-developers.com/showthread.php?t=840285. Both Roms have problems with connecting with WiFi automatically, even when connecting manually, and require me to constantly turn the WiFi on and off to connect. Sometimes a reboot is needed on the 2.3 version because the WiFi gets stuck on "turning off". I'm wondering if there's a fix for this or if the developer of Evervolv will fix this in the future. I'm not able to comment on the developer's thread so this is my only way to get the problem out there. Also in the 2.3 version, the application launcher crashes often and requires a reboot each time to get anything to work. Flash Player doesn't seem to work at all (in fact only way i was able to install it was through Titanium-backup, as trying to install it from the market doesn't work) . I've also noticed random reboots on both versions 2.2 and 2.3. I really like the 2.3 Rom but the constant crashes of the app launcher forced me to switch to the 2.2 version and the WiFi problems persist on that as well. (if anyone asks why don't i just try another launcher, it's cause i like stock Android launchers the best )
Welcome!! The 2.3 rom is still beta so issues will be there. Are you using stock kernel? I've used cm roms and know you must change your wifi policy to never sleep. Not 100% sure if that's where your problem lies but its worth checking. Also the aosp roms IMO are still kinda iffy. Most seem very promising and some run very well but all still need alot of work. If it is becoming to big of an issue I'd nandroid backup, completely wipe and format and try a sense based rom, im trying Koni's ELITE and so far, im very impressed. Just a Thought.
I tried to use different ROMs and Radios and no one can help me. When I turn on wi-fi it shows me "Error" all the time. What can I do to fix it? Some sayd me to open my phone, find wi-fi module and check a cable, but I don't have any chance to do it. What can you advise me? Thank
I had the same problem with HoneySense RC1, but I reflashed the ROM then UNITY V4 w/o booting between and has been working good...that's what I did with Honeysense but without knowing what ROM you're using it's hard to say what the problem is!!!!
I have Shokouhi Saga G2 ROM. But I installed a lot of different ROMs and no one helped me. Maybe today or tommorow I will install UNITY v4 and then write there what will happen. thank
installed UNITY v4 and nothing changed. Maybe i've done something wrong? Can You say me, how i should use this? I loaded ROM manager, booted into Recovery and flashed UNITY. What else? Thank
SuperWipeG2
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
BTTRDYZ said:
You may wanna try SuperWipeG2:
http://forum.xda-developers.com/showthread.php?t=1044992
You will need to do a fresh install of a ROM but this has worked for me in the past also... Just flash the .zip like a ROM, then flash your ROM and then UNITY4 (only if you're using a Sense ROM)!!! Try that on for size, if that doesn't work you need someone more talented than I am!!!
Click to expand...
Click to collapse
Done all this what you said me and nothing changed I turned on a wi-fi and it started and tried to find network, but after 5 seconds it shows me "can not start a scan for a network"
Maybe when I dropped my phone on the ground and that damaged a wi-fi module...
i just received the newer evo with hardware 4 and gingerbread installed on it, i rooted the phone using the new root method and installed mikfroyo 4.62, the wifi is not connecting right or wont connect, ive tried at home, school, and a friends house, is there something i can change like wimax, NV, Pri, radios...just throwing stuff out there, but you know what i mean, anything like that, that i can change so wifi will work again??
Have you tried reflashing the rom? Did you install on a clean install?
Did you flash a custom kernel? Sometimes an incompatible kernel will mess with your wifi.
Sent from my PC36100 using Tapatalk
I have a similar issue that just occurred, I've had it working all until last week now any ROM I flash/restore will connect to wifi then immediately disconnect.
Any other thoughts?
same here then I wiped everything two times and flashed synergy RLS1 + godmode 3.0 rom and now its back. So maybe try that and let me know if it works for you or if it just worked for me.
sorry i thought i hit submit message like a weeks back lol, yeah i got it to work, i flashed a different rom and kernal then went back to the rom i like and it worked, weird, something must have not flashed write
Hi,
I need to know if it is feasible to have the following multiboot setup:
1) Stock Froyo as base (rooted)
2) CM7 as second boot option.
I need to do this because Tmobile wifi calling works consistantly on Stock Froyo but I'd like to have CM7 as an option when Im not in a place where I need wifi calling. I understand they are working on getting wifi calling working with CM7 however, it is not working yet in the stable build and I absolutely need the stability and wifi calling.
Thanks in advance for all responses.
Isn't there wifi calling in CM7? Not sure but check out CM7 whiterabbit edition
Wifi calling seems to work on CM7. It's very recent (impleme'ted only last week).
As to the main question, ask maniac if his multiboot mod works with stock ROMs. I think it does.
CM7 + CM9 double boot
yes its totally feasible... and i have tested it.
after installing 2nd init, install latest CWM bootmenu.
This will give you latest and stable recovery
Then follow the usual steps for multiboot...
Hi I tried to use the multiboot manager and it turned out to be a disaster.
I ended up flashing CM7 nightly over my stock because I couldn't figure out how to get to the second virtual recovery. I tried following the instructions and they just were not clear enough to avoid mistakes.
Now that I have flashed CM7, though I am pleased with the speed and the smoothness (very nice work fellas), i have lost the functionality of the wifi calling app working without an echo... so i cant use it. I guess this will get fixed eventually.
Im not sure where I went wrong, but its not as easily done as it is written out to be. I want to try again, but I am afraid to overwrite my CM7 and have to redo everything.
Use This guide but let the real system be and only flash the virtual system. Should do it. You don't need the app.
Hey thanks for the recommendation. I think i might have to go back to stock while the work out the kineto calling issues. I am a little scared but willing to try now that i am sure my contacts are backed up.