Develop Bugs

Desire broken?

Hi,
I flashed a modified framework-res.apk I got from the emulator (using the new Gingerbread) and flashed it to Oxygen 1.0. I have a GSM, AMOLED Desire.
Now my sdcard doesn't get recognized anymore and the device isn't able to connect to O2 Germany. When I try to connect the phone to my PC (Windows) I get a message that Windows wants to install a "Qualcomm CDMA technologies MSM" driver.
I still can boot the phone up, I can get into recovery (AmonRa 2.0.0) and fastboot.
Can anyone help me?

Flash a stock ROM - ignore the Windows driver thing, that's to do with a modem if you Google it. Why you'd take something from Gingerbread and try it on FroYo is beyond me - super rookie mistake right there!!

EddyOS said:
Flash a stock ROM - ignore the Windows driver thing, that's to do with a modem if you Google it. Why you'd take something from Gingerbread and try it on FroYo is beyond me - super rookie mistake right there!!
Click to expand...
Click to collapse
1. It only was the framework-res.apk and I only took the images from it.
2. I don't have access to my sdcard. Is it still possible to flash a stock ROM?

Try flashing a rom via fastboot.
http://www.firstdroid.com/tutorials...pphire-guias/how-to-load-a-rom-with-fastboot/
Sent from my HTC Desire using XDA App

KBanause said:
1. It only was the framework-res.apk and I only took the images from it.
2. I don't have access to my sdcard. Is it still possible to flash a stock ROM?
Click to expand...
Click to collapse
As you are on o2 Germany, grab this RUU:
http://www.o2online.de/nw/support/downloads/software/htc/htcdesire/htc-desire.html
and reroot via unrevoked, gonna delete everything on your device but should work, you might want to take your sd card out of the phone before doing this just in case anything weird happens ;-)
best regards

That's the same as the o2 UK RUU on shipped-roms.com, would also mean no gold card needed to flash it

How can I get the ROM image as zip file? Is it the OTA update.zip?

Edit: Read the next post, some genius information, learned sth new there : >
If you're talkin bout my solution there is no way to get the zip, simply install HTC sync (yes, you have to -.-), fire up the executable and follow the on screen instructions.

It's the full RUU. To get the PB99IMG.zip from it do the following:
1. Run the RUU
2. Once you get to the first screen of the RUU, move it to the bottom of your screen and go to Start>Run and type
%temp%
And click OK
3. Browse to the newest folder created in the Temp folder
4. In the folder will be a ZIP file called Rom - copy this to your Desktop
5. Rename thr ZIP file to PB99IMG.zip (not PB99IMG.zip.zip) and copy it to the root of your SD card
6. Turn your phone on whilst holding volume down and follow the instructions

I think you don't have to flash a RUU rom. Flashing for example oxygen via fastboot again should do the trick.
Sent from my HTC Desire using XDA App

Better to flash stock again to get everything working again then root again

d0msen said:
Edit: Read the next post, some genius information, learned sth new there : >
If you're talkin bout my solution there is no way to get the zip, simply install HTC sync (yes, you have to -.-), fire up the executable and follow the on screen instructions.
Click to expand...
Click to collapse
Unfortunately I don't have a SENSE ROM installed. Oxygen is an AOSP ROM
EddyOS said:
It's the full RUU. To get the PB99IMG.zip from it do the following:
1. Run the RUU
2. Once you get to the first screen of the RUU, move it to the bottom of your screen and go to Start>Run and type
%temp%
And click OK
3. Browse to the newest folder created in the Temp folder
4. In the folder will be a ZIP file called Rom - copy this to your Desktop
5. Rename thr ZIP file to PB99IMG.zip (not PB99IMG.zip.zip) and copy it to the root of your SD card
6. Turn your phone on whilst holding volume down and follow the instructions
Click to expand...
Click to collapse
I think I have to use the fastboot method as the phone can't find the sdcard anymore
rikmer said:
I think you don't have to flash a RUU rom. Flashing for example oxygen via fastboot again should do the trick.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I have the nandroid .img files of my system before I got those problems. Would it be possible to flash those somehow via fastboot?

For that method I said you do NOT need FASTBOOT. So long as you can connect you SD card to your PC to copy the ZIP file to it and turn your phone on into HBOOT then you'll be fine. If, and it's a big if, it doesn't read the card then yes you'll have to use FASTBOOT and an RUU - you don't need HTC Sync for that

EddyOS said:
For that method I said you do NOT need FASTBOOT. So long as you can connect you SD card to your PC to copy the ZIP file to it and turn your phone on into HBOOT then you'll be fine. If, and it's a big if, it doesn't read the card then yes you'll have to use FASTBOOT and an RUU - you don't need HTC Sync for that
Click to expand...
Click to collapse
It's now updating. I hope it doesn't matter that I have removed the hboot- and splash-image from the zip-file.

EddyOS said:
For that method I said you do NOT need FASTBOOT. So long as you can connect you SD card to your PC to copy the ZIP file to it and turn your phone on into HBOOT then you'll be fine. If, and it's a big if, it doesn't read the card then yes you'll have to use FASTBOOT and an RUU - you don't need HTC Sync for that
Click to expand...
Click to collapse
This method sounds very clean. Second that.
Sent from my HTC Desire using XDA App

Removed them from what? The PB99IMG.zip? Why on earth would you do that?!?!?! It's going to brick your phone!!
Just flash back to stock and start again

EddyOS said:
Removed them from what? The PB99IMG.zip? Why on earth would you do that?!?!?! It's going to brick your phone!!
Click to expand...
Click to collapse
Currently it's just a piece of hardware that is only capable of using WiFi. I can't damage it more. But maybe you're right. I will install the unchange zip file.
But it would be interesting to know what went wrong. Why does using images from the Gingerbread emulator framework-res.apk for a FroYo ROM leads to such an result?

Because the rest of the ROM isn't Gingerbread. It's completely different. It's like me taking a customised framework file and trying to use it on a stock ROM. It doesn't work
Just go back to stock and start again. That way you know you've got a clean base to start from

EddyOS said:
Because the rest of the ROM isn't Gingerbread. It's completely different. It's like me taking a customised framework file and trying to use it on a stock ROM. It doesn't work
Just go back to stock and start again. That way you know you've got a clean base to start from
Click to expand...
Click to collapse
OK. I now have installed the zip but it still can't find the sdcard. And it can't connect to the mobile network (2G/3G) too

KBanause said:
OK. I now have installed the zip but it still can't find the sdcard. And it can't connect to the mobile network (2G/3G) too
Click to expand...
Click to collapse
Wipe everything(everything! even system and boot), reflash radio and oxygen, see if the error persists

S-OFF Error

Trying to S-OFF my HTC Desire which is currently running LeeDroid 3.0.5
At the end of the process (USB Method) it says TC-Box:~S
Also says it is unable to enumulate with USB device on Port 1.
Any idea as to why this is happening or what solutions to do?
Thanks

Try CD method, it's the better way to s-off your device There is less bugs
Sent from my HTC Desire using XDA Premium App

Tried that as well. Burnt the ISO to the disk using Magic Iso. EXACTLY the same error :/

robheald said:
Trying to S-OFF my HTC Desire which is currently running LeeDroid 3.0.5
At the end of the process (USB Method) it says TC-Box:~S
Also says it is unable to enumulate with USB device on Port 1.
Any idea as to why this is happening or what solutions to do?
Thanks
Click to expand...
Click to collapse
There was someone else reporting a similar issue. He finally managed to solve it by flashing stock RUU and then going through the whole rooting, s-off-ing and flashing ROM procedure.

I had the same problem.. I used a virtual machine instead of burning a CD!!

Easiest way to do it. Flash stock rooted froyo Rom with no a2sd and s-off.
Had same problem on some other Rom. Used usb, after flashing froyo everything went smooth.
Sent from my HTC Desire using XDA App

I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.

With this TuT, it´s worked for me...
I was trying about 5 hours to S-Off it... Hours of read threads, google und the questions was here...
Thank you very much
MatDrOiD said:
I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.
Click to expand...
Click to collapse

MatDrOiD said:
I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.
Click to expand...
Click to collapse
Interesting. I had problems (device not recognised / supported at this time) trying s-off with rooted stock froyo sense, after making a goldcard.
Never got to the bottom of it but as soon as I flashed oxygen (gingerbread) it worked fine!
CD method best, virtualbox kept crashing for me!

HP246 said:
With this TuT, it´s worked for me...
I was trying about 5 hours to S-Off it... Hours of read threads, google und the questions was here...
Thank you very much
Click to expand...
Click to collapse
No problem. I would really appreciate it if u press the "Thanks- Button" for this.

MatDrOiD said:
I think we are talking about S-OFF with Alpharev?!
Read in a serious german forum this problem could be caused by gingerbread. It is recommended to install a FROYO-Rom for S-OFF with Alpharev.
Detailled instruction:
1.) COMPLETE NANDROID- backup
2.) Download a FROYO- ROM (i used DeFroST)
3.) Copy it on your sd-card
4.) Start your phone in Recovery
5.) Do a FULL Wipe
6.) Flash FROYO- ROM
7.) Reboot your phone completely (to the homescreen of the new ROM)
8.) Download the iso from Alpharev-Homepage, check MD5 if file is complete and burn the ISO on CD
9.) Start your PC with the created disk [eventually u have to change your boot order (disk-drive on first position)]
10.) Follow the instructions on the screen (i only had to connect my Desire with PC in USB-Debug-Mode. Then I waited til i got the message that S-OFF is complete)
11.) After S-OFF is complete, boot your phone into recovery
12.) Restore the constructed backup
13.) Have fun with your previously ROM and S-OFF
Followed these steps tomorrow and it worked properly without any problems.
Click to expand...
Click to collapse
Thank you for that, I will most likely try this at a later date I was trying to get iNsertCoin flashed but of course needed S-Off and hit problems. So sticking with Reflex at the moment which looks exactly the same

[Q] i bricked my phone

hi i try to install one of the custom ROM last night but when i update the phone with ROM manager it will not start i can get in to the boot and clockwork recovery but that's it i try recovering it but nothing i tried using one of the ruu_bravo.exe but i get so far then it say error 107 what do i need to do to get it back to normal ?????

Which ROM did you try? What version of cwm do you have? Did you flash in Recovery? Did you do nandroid backup first? Did you use correct RUU for your device/carrier?
More information please (and full-stops, commas and capital letters, so I don't go blue reading one long sentence...)

hi its it cyanogenmod 7.0.3 which i now got working its pretty kool but if i do change my mind and i want to go back to the original htc desire rom which do i choose
my network is orange uk
phone htc desire
and if you need more info just ask and thanks for the quick reply

Create goldcard with linux:
http://www.nazriawang.com/2010/04/how-to-create-goldcard-with-ubuntu.html
When finished, put this in your phone and try to flash ruu again.

hi thanks for another quick reply to this thread when i use the unrooted ruuu it stars then after about 2 mins give me a 107 error about the usb not being connected so ????

bigboy2008 said:
hi thanks for another quick reply to this thread when i use the unrooted ruuu it stars then after about 2 mins give me a 107 error about the usb not being connected so ????
Click to expand...
Click to collapse
Is USB debugging enabled? I'm not sure it matters if using ruu, but it does for all other operations involving connecting via USB!

yes
hi i did check that and it was so i did try with out it enabled and it did not even start with it enable it start then give me a 107 error so ???? it because i flash the new rom or is it my windows 7 drivers or even settings ??

Don't use Rom-manager for flash,update,backup.it gives u more trouble then it solves.experienced user recommend not to use it.
i am also in same situation like you few days ago usb bricked and stuck on stock rom..and i solved my problem by doing this steps.
after i unlocked my sd card via fastboot command"fastboot oem enableqxdm 0" sd card recognized by phone and i can browse it via file explorer.
then i copied the visionary+(it gave me temporary root access which is needed to work this whole thing out).
root explorer,terminal emulator apk and those usb bricked update file(image_flash,mtd0.img) to sdcard from pc via card reader and installed them.
before copy those update file on sd card i edited the mtd0.img to put correct cid n rom info via hex editor.
after that i copied those update file in phone memory
/data/data/ and set permission for r/w and execute with the help of root explorer as i got root permission
after that i simply typed this command in terminal emulator
"su
/data/data/flash_image misc /data/data/mtd0.img"
Rebooted my phone and voila usb brick is gone htc sync,usb tethering,sd card mount,charge everything is working

i fixed it with a little help
OK my wife has the same phone as me so all i did was use clockwork recovery to make a back up img of her phone and then i flashed it and it had all her data and the phone went in to safe mode so i factory reset and its now all fine and working with the original rom

[Q] Cannot mount SD Card(clockworkmod)

Hi Experts,
I am getting serious problem in my clockworkmod recovery, I am not able to mount the card because of which I am not able to install any ROM, the thing is that I do not have any ROM installed on my phone so cannot go out from boot/recovery window.
I am getting error like when I try to open SD directory from recovery
can't mount /dev/block/mmcblk0
Please help I tried searching the thread but could not find any good solution.
Formatted the SD-card card also but no success

I am having the same problem here

Plz help expert , I tried to use another sd card also although it was old with 128 mb space but same error was shown in recovery,
it is the case the the sd port might have been corrupted?
then i think the phone is gone
plz help

Plz help guys...no one to suggest something ...m thinking of taking the phone at service center....but u i think warranty is void now ...as it is rooted...

ok soz i just read 1st post carefully, will help you momentairly
also i need to know is your phone S-OFF ?? (did you do the alpharev procedure or just unrevoked)
you must set up ADB on your pc : http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/ you dont need to do steps 3-5 since you already have the drivers (the same as rooting), you must download the ADB files from 'update' part after the step six, and dont do ADB devices cmd, do 'fastboot devices' while in fastboot mode (back+power) to check if you get a serial number (if yes it works if not you didnt do it right way)
when done, put your phone into fastboot mode (back+power) and in windows command prompt do :
fastboot oem enableqxdm 0
this should fix your SD, then go into recovery and check if you can mount your SD (USB storage) to use it in windows, if yes you are good if not that is an USB-brick, it is fixable so dont worry

Thanks for the help .... Will try this ASAP....hope it helps
Also my phone is NOT S-OFF...Do i need this before proceeding or can I solve the issue like this..??

you dont need S-OFF and, if you have USB-brick i dont think you can make this procedure
first, do what i told you (set up adb and enable your sd card) and check if your phone has any usb-connectivity
also this will help you - How to set up pc to use adb and fastboot (if you wont make it with unlockr method)
http://androidforums.com/desire-all...fastboot-windows-updated-1st-june-2011-a.html

XDA should make the search button NEON!!!!
http://forum.xda-developers.com/showthread.php?t=563298&page=3

thank dzumagos
I am now able to to mount SD card and able to see all files
but wen I run them thru recovery it show..
opening package.. then updating package.. then it returns to main screen of CWM recovery... does nothing ...this is happeing with all the zip files...

are you 100% sure the .zip file are OK ?
try downloading Oxygen ROM and flashing it.
also i do understand you can connect your phone with computer with USB cable [with USB storage enabled in recovery, does the windows see the FAT partition on sdcard] ?

check your md5 sums - or flash another recovery

Yes the zip files are OK i already installed them before (RCmixS)
but wen i mount from recovery the usb is not seen in windows...
but now m able to see the files in sd in recovery but cannot install ROM thru it..or run any zip file

usb brick ? Usb cannot be seen by windows?
http://forum.xda-developers.com/showthread.php?t=691187

If i insert USB separately thru adapter it can be seen but wen the mount thru recovery it is not seen..does this mean it has bricked ..windows says cannot recognize mass storage device...

plz help guys still no gain...cant install rom...

firstly lets try to flash a rom
http://forum.xda-developers.com/showthread.php?t=839640&highlight=clockworkmod
download clockworkmod 3.0.0.5 ZIP file and put it onto your SD
then boot into recovery and flash the downloaded CWM.zip, it should now boot up into clockworkmod 3.0.0.5
now try flashing a ROM (rcmixs or some AOPS - Oxygen or CM7)
you can also try with clockworkmod 3.2.0.1 (but 3.0.0.5 is better imho)
http://forum.xda-developers.com/showthread.php?t=1039954&highlight=clockworkmod
now hopefully you will have a bootable device. now the usb-brick.
all you need to know is in the 1st posts of this two threads
http://forum.xda-developers.com/showthread.php?t=691639
http://forum.xda-developers.com/showthread.php?t=1143252&highlight=usb-brick
also in the second thread there is 'visionary+' mentioned but you do not need it, since you are rooted already.
both threads describe the same method, read them and you will know what to do.
good luck
-----------------------
if for any reason you cant flash a ROM with a diffrent recovery then im outta ideas. someone else would have to figure out why cant you flash a ROM (not being able to flash a rom has got nothing to do with usb-brick)
just to be safe, try with oxygen.
----------------------
and if nothing works you could try a RUU (put phone into fastboot and then run the .exe file on PC and it will work) this should restore you to a Stock unrooted rom, but the USB-Brick will still be there, so you would need to do the method from 2nd thread with visionary+ to gain temp root

thanks a lot dzumagos
for all the help...will try it ...

simply try to change the recovery with unrevoked , download amonra recovery and it should work

But doesnt changing the recovery with unrevoked works when u have a ROM install...
As I do not have any ROM installed can I change the Recovery.....
the thing is I rooted the phone long back and now I forgot how I did it....need to search it ...
Also when I run CWM 3.0.0.5 thru recovery it changes to 3.0 but wen i reboot the recovery again CWM 2.5 comes
y is that so ??

yes it is the way it is supposed to be
it is called 'fake-flash' which means CWM 3.0.0.5 is flashed temporairly. so it is gone after a reboot. to flash it permanently you would have to be S-OFF which you are not but that is not a problem.
anyway were you able to flash a ROM using 3.0.0.5 or does is act the same as 2.5.0.7 ???? did you try with Oxygen rom ??

[Q] Root on my HTC Desire

Hello!
I have my desire for more than a year, some time ago I attempted to root my phone but when using the revo ... there was no effect. I have to admit that I have no knowledge on this topic. I want someone to explain step by step what I need to do (preferably with pictures) and one by one said what happens (bootload and everything means nothing for me). I should add that I did not want to upload a new system just to get access to system files. I care about my android play in the substitution of system files. (I hope that after all this root can do).

Ur phone is s-off so to gain root all u have to do is flash superuser zip from recovery
Sent from my HTC Desire
---------- Post added at 08:04 PM ---------- Previous post was at 07:56 PM ----------
http://androidforums.com/desire-all...ff-root-htc-desire-revolutionary-updated.html
Go here and download superuser 3.0.7 zip and put it on ur sdcard then with ur phone off hold volume down + power. Once in bootloader press volume buttons to navigate down to recovery and press power button to select, then in recovery choose install zip from sdcard and flash superuser.zip, once complete just reboot and u will have root
Sent from my HTC Desire

sorry to hijack thread...
my info in signature, is there an option to download Voodoo OTA Rootkeeper from the Playstore and back up your root access before updating with 2.3.6? and then root back?

kmetek said:
sorry to hijack thread...
my info in signature, is there an option to download Voodoo OTA Rootkeeper from the Playstore and back up your root access before updating with 2.3.6? and then root back?
Click to expand...
Click to collapse
?!?
You're able to do a OTA 2.3.6 update? What magic do you use, or what weed are you smoking?

Can I back to stock after root? (unroot). I also want to get more space on my phone. I read about making sth on SD card but i dont know what have to do. Every tutorial is other and i dont know now how to make.
When i press power button on recovery it shows htc logo and then phone icon with green then turns into a red with an exclamation mark

nlooo: i was asking if it's an option

Any solutions to my problem? Can some one reply me please.

You have to flash a new recovery. Try running revolutionary again, and let it install ClockworkMod.
To "make your internal memory larger", you will need an ext partition on your sdcard, then install a a2sd script.
Sent from my toaster.

abaaaabbbb63 said:
You have to flash a new recovery. Try running revolutionary again, and let it install ClockworkMod.
To "make your internal memory larger", you will need an ext partition on your sdcard, then install a a2sd script.
Sent from my toaster.
Click to expand...
Click to collapse
So there is next problem when you run volume - and power button and then connect to pc it say Android 1.0 ( on revo you need to update drivers but but when i try to do it, it says not found (in that folder)). I got windows 7. Also i read that revo dont allow to root phones with hboot 6.93 or i'm wrong. Sorry for bad english

//thnx for correcting me.
Another way would be through fastboot. If you search the forums, you will find a "fastboot" tool. As I am posting from my phone, and because I suffer from a severe case of laziness, you will have to find it yourself.
Another thing you need is Android Usb Drivers. Google it, download the drivers, then plug the phone in the PC. Go to Device Manager, right click the Android 1.0, then click update , then select update drivers manually. Then browse to the folder you have the android usb drivers content in.
Try using this guide.
http://forum.xda-developers.com/showthread.php?t=1016084
Sent from my toaster.

abaaaabbbb63 said:
Revolutionary would have s-offed you, and would have installed clockworkmod recovery. As you are already s-off, and have their custom hboot, revolutionary will only flash clockworkmod. It's an easy way to do it.
Another way would be through fastboot. If you search the forums, you will find a "fastboot" tool. As I am posting from my phone, and because I suffer from a severe case of laziness, you will have to find it yourself.
Another thing you need is Android Usb Drivers. Google it, download the drivers, then plug the phone in the PC. Go to Device Manager, right click the Android 1.0, then click update , then select update drivers manually. Then browse to the folder you have the android usb drivers content in.
Sent from my toaster.
Click to expand...
Click to collapse
And if u run revolutionary it will tell u that u are already s-off u idiot. Or something like that haha.
Flash new recovery via fastboot commands. Click adb & fastboot in my sig for a guide. then click PB99IMG 4ext recovery in my sig and download PB99IMG.zip and extract "recovery.img" (its the latest 4ext) and flash it using fastboot commands.
Or just do it the PB99IMG method, instructions r there too
Sent from my HTC Desire

jmcclue said:
And if u run revolutionary it will tell u that u are already s-off u idiot. Or something like that haha.
Flash new recovery via fastboot commands. Click adb & fastboot in my sig for a guide. then click PB99IMG 4ext recovery in my sig and download PB99IMG.zip and extract "recovery.img" (its the latest 4ext) and flash it using fastboot commands.
Or just do it the PB99IMG method, instructions r there too
Sent from my HTC Desire
Click to expand...
Click to collapse
already used that revolutionary and now on recovery shown:
picture attached
I need now to run that superuser file (flash form sd) and i get full root?
Could you tell me about gold card, backup and every thing (most wanted on begin of rooting)

jmcclue said:
And if u run revolutionary it will tell u that u are already s-off u idiot.
Click to expand...
Click to collapse
Revolutionary flashed the clockworkmod. What a surprise...
Moving on. Backing up from recovery does a full backup of the current state of the phone. If you do something wrong, this will restore your phone to the exact state that it was when the backup was made. Don't forget to make one before making major changes to your phone (rom flashing).
And yes, flashing that superuser.zip will give you root.
Before flashing a rom, after you did a backup, make a factory data reset, and delete cache and dalvik. This will make a clean installation of the rom.
To move your apps from one rom to another, i recommend using Titanium Backup, and restore your apps on the new rom.
Most roms require an ext partition on your sdcard. To partition sdcard, you must flash 4ext recovery. Do this by searching the play store for "4ext recovery control" the app will flash it for you. Then, backup your sd contents to your pc ( the partition proccess will format your sd), Then reboot into recovery, select tools, partition sd-card. Make an ext4 partition of 1gb, and for the rest select 0. Then, congratz, you have an ext partition. To use it, you must flash an a2sd script. I use "mounts2sd". Google it. This script will have to be flashed to any rom you install, every time, unless the rom already has a script built in.
Then you're ready to flash any rom your heard "desires". Hehe... get it... "desires".
P.S. Gold card information:
What a Gold Card does is letting you install ROMs on your Android device that aren’t intended for your carrier. For example,if you have a T-Mobile USA HTC Desire, you can install an official ROM intended for the O2 UK HTC Desire, or even a generic ROM that isn’t locked to a carrier.It does so by disabling the CID (Carrier ID)check that the device does when installing a ROM.
If you have an unlocked desire, then you won't need a gold card.
Sent from my toaster.

As you can see im total newbie. Step by step.
If i make back up where will save backup file? Do i have to copy it any where.
Ex. If i add widget to system files can i back to my old one? And every file on forum is in zip. How to install it to my system (ex. that widget)

hightrancer said:
As you can see im total newbie. Step by step.
If i make back up where will save backup file? Do i have to copy it any where.
Ex. If i add widget to system files can i back to my old one? And every file on forum is in zip. How to install it to my system (ex. that widget)
Click to expand...
Click to collapse
If you backup from recovery, that backup will be saved on sdcard in the clockworkmod/backup folder.
To install a zip, go to recovery and select "install zip from sdcard" , then find and select the zip. Remember to backup first.
Usually widgets, apps in general come in .apk format. If you want to install one, just install it with root explorer. No need for recovery install.
Anyways, i'm kinda tired. If you have any more questions, ask jmcclue.
Sent from my toaster.

abaaaabbbb63 said:
Revolutionary flashed the clockworkmod. What a surprise...
Click to expand...
Click to collapse
Ok.. i wasnt calling u an idiot, i was just trying to be funny! And the instructions i gave is the best way to flash recovery, from fastboot. Not just run revolutionary and he wont need to "buy" 4ext recovery control coz my guide is the latest recovery.
abaaaabbbb63 said:
Make an ext4 partition of 1gb, and for the rest select 0.
Click to expand...
Click to collapse
Actually its "skip" not 0
Sent from my HTC Desire

I'm not sure why people don't read tutorials, there aro so many of them on this topic.

nlooooo said:
I'm not sure why people don't read tutorials, there aro so many of them on this topic.
Click to expand...
Click to collapse
Yh i know, i already suggested the 1 in my sig earlier,... Probably the best 1 around. But like u said, people dont read tutorials and would rather just write problems
Sent from my HTC Desire

abaaaabbbb63 said:
If you backup from recovery, that backup will be saved on sdcard in the clockworkmod/backup folder.
To install a zip, go to recovery and select "install zip from sdcard" , then find and select the zip. Remember to backup first.
Usually widgets, apps in general come in .apk format. If you want to install one, just install it with root explorer. No need for recovery install.
Anyways, i'm kinda tired. If you have any more questions, ask jmcclue.
Sent from my toaster.
Click to expand...
Click to collapse
Thanks for your help now everything is easier.

jmcclue said:
Ur phone is s-off so to gain root all u have to do is flash superuser zip from recovery
Sent from my HTC Desire
---------- Post added at 08:04 PM ---------- Previous post was at 07:56 PM ----------
http://androidforums.com/desire-all...ff-root-htc-desire-revolutionary-updated.html
Go here and download superuser 3.0.7 zip and put it on ur sdcard then with ur phone off hold volume down + power. Once in bootloader press volume buttons to navigate down to recovery and press power button to select, then in recovery choose install zip from sdcard and flash superuser.zip, once complete just reboot and u will have root
Sent from my HTC Desire
Click to expand...
Click to collapse
My phone is S-OFF however I am unable to push recovery. I have SU signed package on the SD card though CWM is not there in my phone. I have tried numerous time with both, Unrevoked and Evolution's method but they just won't give me any result but keep me waiting.
I have even tried to flash recovery via fastboot but it returns with an error says "Failed".
Can some one through light on what am I missing?