Hi Experts,
I am getting serious problem in my clockworkmod recovery, I am not able to mount the card because of which I am not able to install any ROM, the thing is that I do not have any ROM installed on my phone so cannot go out from boot/recovery window.
I am getting error like when I try to open SD directory from recovery
can't mount /dev/block/mmcblk0
Please help I tried searching the thread but could not find any good solution.
Formatted the SD-card card also but no success
I am having the same problem here
Plz help expert , I tried to use another sd card also although it was old with 128 mb space but same error was shown in recovery,
it is the case the the sd port might have been corrupted?
then i think the phone is gone
plz help
Plz help guys...no one to suggest something ...m thinking of taking the phone at service center....but u i think warranty is void now ...as it is rooted...
ok soz i just read 1st post carefully, will help you momentairly
also i need to know is your phone S-OFF ?? (did you do the alpharev procedure or just unrevoked)
you must set up ADB on your pc : http://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/ you dont need to do steps 3-5 since you already have the drivers (the same as rooting), you must download the ADB files from 'update' part after the step six, and dont do ADB devices cmd, do 'fastboot devices' while in fastboot mode (back+power) to check if you get a serial number (if yes it works if not you didnt do it right way)
when done, put your phone into fastboot mode (back+power) and in windows command prompt do :
fastboot oem enableqxdm 0
this should fix your SD, then go into recovery and check if you can mount your SD (USB storage) to use it in windows, if yes you are good if not that is an USB-brick, it is fixable so dont worry
Thanks for the help .... Will try this ASAP....hope it helps
Also my phone is NOT S-OFF...Do i need this before proceeding or can I solve the issue like this..??
you dont need S-OFF and, if you have USB-brick i dont think you can make this procedure
first, do what i told you (set up adb and enable your sd card) and check if your phone has any usb-connectivity
also this will help you - How to set up pc to use adb and fastboot (if you wont make it with unlockr method)
http://androidforums.com/desire-all...fastboot-windows-updated-1st-june-2011-a.html
XDA should make the search button NEON!!!!
http://forum.xda-developers.com/showthread.php?t=563298&page=3
thank dzumagos
I am now able to to mount SD card and able to see all files
but wen I run them thru recovery it show..
opening package.. then updating package.. then it returns to main screen of CWM recovery... does nothing ...this is happeing with all the zip files...
are you 100% sure the .zip file are OK ?
try downloading Oxygen ROM and flashing it.
also i do understand you can connect your phone with computer with USB cable [with USB storage enabled in recovery, does the windows see the FAT partition on sdcard] ?
check your md5 sums - or flash another recovery
Yes the zip files are OK i already installed them before (RCmixS)
but wen i mount from recovery the usb is not seen in windows...
but now m able to see the files in sd in recovery but cannot install ROM thru it..or run any zip file
usb brick ? Usb cannot be seen by windows?
http://forum.xda-developers.com/showthread.php?t=691187
If i insert USB separately thru adapter it can be seen but wen the mount thru recovery it is not seen..does this mean it has bricked ..windows says cannot recognize mass storage device...
plz help guys still no gain...cant install rom...
firstly lets try to flash a rom
http://forum.xda-developers.com/showthread.php?t=839640&highlight=clockworkmod
download clockworkmod 3.0.0.5 ZIP file and put it onto your SD
then boot into recovery and flash the downloaded CWM.zip, it should now boot up into clockworkmod 3.0.0.5
now try flashing a ROM (rcmixs or some AOPS - Oxygen or CM7)
you can also try with clockworkmod 3.2.0.1 (but 3.0.0.5 is better imho)
http://forum.xda-developers.com/showthread.php?t=1039954&highlight=clockworkmod
now hopefully you will have a bootable device. now the usb-brick.
all you need to know is in the 1st posts of this two threads
http://forum.xda-developers.com/showthread.php?t=691639
http://forum.xda-developers.com/showthread.php?t=1143252&highlight=usb-brick
also in the second thread there is 'visionary+' mentioned but you do not need it, since you are rooted already.
both threads describe the same method, read them and you will know what to do.
good luck
-----------------------
if for any reason you cant flash a ROM with a diffrent recovery then im outta ideas. someone else would have to figure out why cant you flash a ROM (not being able to flash a rom has got nothing to do with usb-brick)
just to be safe, try with oxygen.
----------------------
and if nothing works you could try a RUU (put phone into fastboot and then run the .exe file on PC and it will work) this should restore you to a Stock unrooted rom, but the USB-Brick will still be there, so you would need to do the method from 2nd thread with visionary+ to gain temp root
thanks a lot dzumagos
for all the help...will try it ...
simply try to change the recovery with unrevoked , download amonra recovery and it should work
But doesnt changing the recovery with unrevoked works when u have a ROM install...
As I do not have any ROM installed can I change the Recovery.....
the thing is I rooted the phone long back and now I forgot how I did it....need to search it ...
Also when I run CWM 3.0.0.5 thru recovery it changes to 3.0 but wen i reboot the recovery again CWM 2.5 comes
y is that so ??
yes it is the way it is supposed to be
it is called 'fake-flash' which means CWM 3.0.0.5 is flashed temporairly. so it is gone after a reboot. to flash it permanently you would have to be S-OFF which you are not but that is not a problem.
anyway were you able to flash a ROM using 3.0.0.5 or does is act the same as 2.5.0.7 ???? did you try with Oxygen rom ??
Related
I have installed the last Desire ClockWorkMod Recovery 2.5.1.2 ( http://forum.xda-developers.com/showpost.php?p=9207285&postcount=1 )
using fastboot (fastboot flash recovery recovery.img).
All ok, it seemed to work...
As a happy children i have reboot in recovery mode and then do a full rom backup... backup done...
When device is rebooted... Can't mount /dev/block/mmcblk0p1 nooo...
After a little search i find the Andras_m post ( http://forum.xda-developers.com/showthread.php?t=563298 ) that "save my heart"...
All done, format SD and Device...
Create 512 EXT partition with CWMR 2.5.1.2 (no swap partition)
Restore all my backup (SD and ROM) only 1 hour old
Now another two troubles
1) If i enable BlueTooth, it seem start and after 5 second it close
2) If i plug usb in device, it's start battery charging, but 3 computers with 3 different OS XP-Seven-Ubuntu don't know the device...
I tried to reinstall the drivers, but nothing...
However in fastboot mode, i can use the phone from PC... (example install Recovery)
Then i format ALL, start from zero...
Install ROM (DeFrost 6.0h and BFS kernel 6.0i), install last radio 32.49... (Recommended) ( http://forum.xda-developers.com/showthread.php?t=690477 )
"Al work" but not the BT and USB...
Can anyone help or redirect me to a solution?
AlboGio said:
I have installed the last Desire ClockWorkMod Recovery 2.5.1.2 ( http://forum.xda-developers.com/showpost.php?p=9207285&postcount=1 )
using fastboot (fastboot flash recovery recovery.img).
All ok, it seemed to work...
As a happy children i have reboot in recovery mode and then do a full rom backup... backup done...
When device is rebooted... Can't mount /dev/block/mmcblk0p1 nooo...
After a little search i find the Andras_m post ( http://forum.xda-developers.com/showthread.php?t=563298 ) that "save my heart"...
All done, format SD and Device...
Create 512 EXT partition with CWMR 2.5.1.2 (no swap partition)
Restore all my backup (SD and ROM) only 1 hour old
Now another two troubles
1) If i enable BlueTooth, it seem start and after 5 second it close
2) If i plug usb in device, it's start battery charging, but 3 computers with 3 different OS XP-Seven-Ubuntu don't know the device...
I tried to reinstall the drivers, but nothing...
However in fastboot mode, i can use the phone from PC... (example install Recovery)
Then i format ALL, start from zero...
Install ROM (DeFrost 6.0h and BFS kernel 6.0i), install last radio 32.49... (Recommended) ( http://forum.xda-developers.com/showthread.php?t=690477 )
"Al work" but not the BT and USB...
Can anyone help or redirect me to a solution?
Click to expand...
Click to collapse
Buddy developers use a General Rule of thumb and it states....
"If a thing aint Broken .... dont try to fix it"
when i flashed my desire via unrevoked i got the same Clockworkmod as everyone else ...2.5.0.7 with that recovery i can make nandroid backups i can install any custom rom and it works just fine. i saw the 2.5.1.2 update on xda forum aswell but when a recovery menu is working for me why should i update it. so i didnt... I guess by now you would have realized the same
anyways... if you want help in this specific topic i suggest you post on original thread of Clockworkmod 2.5.1.2.... the one you mentioned ....
they should be able to help you out
hispeedworm said:
Buddy developers use a General Rule of thumb and it states....
"If a thing aint Broken .... dont try to fix it"
I already know it... used for firmware... driver...
But i am one of the normal and common, a little stupid, users that love the updates and, like a drugged man, is always searching of a new "official" update...
when is found an update "signed as last official", i use it... sometimes wrong...
Now, i hope that CWMR guys can help me
Thank for reply
I find solution:
http://forum.xda-developers.com/showthread.php?t=691639
Pay attention for your device CID and use a terminal emulator app on device for flash the fix (i had forgotten this app )
Click to expand...
Click to collapse
Out of no where I got a message on my phone, saying that my sd card was unmounted. I wasn't doing anything other than I normally would. Now when I try to access my SD card, it's not even seen by the G2. I've formatted it to FAT32 and nothing, I've restarted the phone multiple times and no dice, and I have given it time to rest. I cannot seem to find the issue with this, but I have heard about some issue with the SD card latch thing. What can I do to fix this issue? Any advice would be greatly welcome
Have you tried another SD card to see if it is the phone or the SD card giving you problems?
Sent from my SilverBullet 'HTCDesireZ running CM7'
Fireflyz said:
Out of no where I got a message on my phone, saying that my sd card was unmounted. I wasn't doing anything other than I normally would. Now when I try to access my SD card, it's not even seen by the G2. I've formatted it to FAT32 and nothing, I've restarted the phone multiple times and no dice, and I have given it time to rest. I cannot seem to find the issue with this, but I have heard about some issue with the SD card latch thing. What can I do to fix this issue? Any advice would be greatly welcome
Click to expand...
Click to collapse
Is it the SD card that came with the g2 or a different one?
I had this happen with a 32GB patriot class 10 I put in my G2. It would corrupt and do the exact same until I full formatted it on a PC. (long story short it's a issue with the sdcard itself and has to be formatted a special way, but it's ONLY THIS CARD).
Try a different card, if a different card works then full format the nonworking card. If that still doesn't work then there may be a off chance (a very very off chance) that the card went bad.
Went to the T-mobile store and tried 2 different sd cards. Neither of them worked... any way to fix this on my own? If not, then can I un-root my G2 without an SD? If I call up costumer care, they'll probably want me to send my G2 in and will notice it has been rooted and such. I heard somewhere that as long as it looks stock, they won't do/say anything... not sure if this is true though..
Fireflyz said:
Went to the T-mobile store and tried 2 different sd cards. Neither of them worked... any way to fix this on my own? If not, then can I un-root my G2 without an SD? If I call up costumer care, they'll probably want me to send my G2 in and will notice it has been rooted and such. I heard somewhere that as long as it looks stock, they won't do/say anything... not sure if this is true though..
Click to expand...
Click to collapse
Yikes, I'm not sure if you can if it can't read a image off the sdcard to flash.
You do have a legit hardware issue that rooting couldn't cause though.
The sd slot is not fixable most likely.
But getting your phone back to stock is.
if you have an eng s-off bootloader you can usually fasboot update the PC10IM.zip if you rename it to update.zip and place it in your adb/fastboot fodler on your pc like so:
fastboot update
ot
fastboot update update.zip
not sure, it's been a while
if you have an s-on bootloader have no fear, you can still get to stock, it's a little more complicated.
find a PC10IMG.zip that has a stock recovery.img in it.
extract it and place it somwhere it is easy to locate and the path is short for ease. like c:\
download a flashable recovery update zip for the stock rom you want to load back on the device. keep it for later.
download this special recovery image:
View attachment CWM-3.0.2.4-sd-spoof.zip
extract the image and flash it from the OS, you'll need to boot your phone first then when it is up and running you need to enable usb debugging and use it to push the recovery image to your /data partition
adb push recovery.img /data
or the path is required if you put it elsewhere like c:\
adb push c:\recovery.img /data
it should be in /data/recovery.img
then open terminal or since you shoudl have adb open you can use 'adb shell' then type enter to enter a root shell
flash_image recovery /data/recovery.img
it should just spir out a
#
that means it's successful, reboot to recovery
now you will be able to push items to the root of your /data folder (or anywhere in /data really)
when you select the flash zip from recovery option it will spoof the /data folder as the /sdcard and display the contents of your /data folder rather than the /sdcard allowing you to flash without needing the sdcard to work.
now flash any stock rom from recovery.
while still in recovery you will need to flash the stock recovery image as well once you verify the stock rom is in place and boots. you will still have CWM but you wont be rooted so flashing from recovery is required. it can be flashed with the same commands you used to flash the other recovery from the OS
if you get a return of error -1 when you try to use the flash_iamge command to flash recovery PM me, i have a fix for that as well. it should be updated though not to do that any more.
ONCE YOU FLASH THE STOCK RECOVERY AND STOCK ROM, unless you manually root again, which will be tricky, you are stuck.
hope this has been helpful.
amazinglarry311 said:
The sd slot is not fixable most likely.
But getting your phone back to stock is.
if you have an eng s-off bootloader you can usually fasboot update the PC10IM.zip if you rename it to update.zip and place it in your adb/fastboot fodler on your pc like so:
fastboot update
ot
fastboot update update.zip
not sure, it's been a while
if you have an s-on bootloader have no fear, you can still get to stock, it's a little more complicated.
find a PC10IMG.zip that has a stock recovery.img in it.
extract it and place it somwhere it is easy to locate and the path is short for ease. like c:\
download a flashable recovery update zip for the stock rom you want to load back on the device. keep it for later.
download this special recovery image:
View attachment 582547
extract the image and flash it from the OS, you'll need to boot your phone first then when it is up and running you need to enable usb debugging and use it to push the recovery image to your /data partition
adb push recovery.img /data
or the path is required if you put it elsewhere like c:\
adb push c:\recovery.img /data
it should be in /data/recovery.img
then open terminal or since you shoudl have adb open you can use 'adb shell' then type enter to enter a root shell
flash_image recovery /data/recovery.img
it should just spir out a
#
that means it's successful, reboot to recovery
now you will be able to push items to the root of your /data folder (or anywhere in /data really)
when you select the flash zip from recovery option it will spoof the /data folder as the /sdcard and display the contents of your /data folder rather than the /sdcard allowing you to flash without needing the sdcard to work.
now flash any stock rom from recovery.
while still in recovery you will need to flash the stock recovery image as well once you verify the stock rom is in place and boots. you will still have CWM but you wont be rooted so flashing from recovery is required. it can be flashed with the same commands you used to flash the other recovery from the OS
if you get a return of error -1 when you try to use the flash_iamge command to flash recovery PM me, i have a fix for that as well. it should be updated though not to do that any more.
ONCE YOU FLASH THE STOCK RECOVERY AND STOCK ROM, unless you manually root again, which will be tricky, you are stuck.
hope this has been helpful.
Click to expand...
Click to collapse
S-off and S-on bootloader? Is that the same as having S-on/S-off in general?
Larry was banned this morning, apparently being helpful isnt something highly valued around here.
yeah, you achieve s-off using gfree and you can decide if you want to install the ENG bootloader.
If you did, it should say ENG S-OFF instead of SHIP S-OFF
if fastboot allows you to do anything remotely you're in a good shape and that means you probably have a ENG bootloader.
hi i try to install one of the custom ROM last night but when i update the phone with ROM manager it will not start i can get in to the boot and clockwork recovery but that's it i try recovering it but nothing i tried using one of the ruu_bravo.exe but i get so far then it say error 107 what do i need to do to get it back to normal ?????
Which ROM did you try? What version of cwm do you have? Did you flash in Recovery? Did you do nandroid backup first? Did you use correct RUU for your device/carrier?
More information please (and full-stops, commas and capital letters, so I don't go blue reading one long sentence...)
hi its it cyanogenmod 7.0.3 which i now got working its pretty kool but if i do change my mind and i want to go back to the original htc desire rom which do i choose
my network is orange uk
phone htc desire
and if you need more info just ask and thanks for the quick reply
Create goldcard with linux:
http://www.nazriawang.com/2010/04/how-to-create-goldcard-with-ubuntu.html
When finished, put this in your phone and try to flash ruu again.
hi thanks for another quick reply to this thread when i use the unrooted ruuu it stars then after about 2 mins give me a 107 error about the usb not being connected so ????
bigboy2008 said:
hi thanks for another quick reply to this thread when i use the unrooted ruuu it stars then after about 2 mins give me a 107 error about the usb not being connected so ????
Click to expand...
Click to collapse
Is USB debugging enabled? I'm not sure it matters if using ruu, but it does for all other operations involving connecting via USB!
yes
hi i did check that and it was so i did try with out it enabled and it did not even start with it enable it start then give me a 107 error so ???? it because i flash the new rom or is it my windows 7 drivers or even settings ??
Don't use Rom-manager for flash,update,backup.it gives u more trouble then it solves.experienced user recommend not to use it.
i am also in same situation like you few days ago usb bricked and stuck on stock rom..and i solved my problem by doing this steps.
after i unlocked my sd card via fastboot command"fastboot oem enableqxdm 0" sd card recognized by phone and i can browse it via file explorer.
then i copied the visionary+(it gave me temporary root access which is needed to work this whole thing out).
root explorer,terminal emulator apk and those usb bricked update file(image_flash,mtd0.img) to sdcard from pc via card reader and installed them.
before copy those update file on sd card i edited the mtd0.img to put correct cid n rom info via hex editor.
after that i copied those update file in phone memory
/data/data/ and set permission for r/w and execute with the help of root explorer as i got root permission
after that i simply typed this command in terminal emulator
"su
/data/data/flash_image misc /data/data/mtd0.img"
Rebooted my phone and voila usb brick is gone htc sync,usb tethering,sd card mount,charge everything is working
i fixed it with a little help
OK my wife has the same phone as me so all i did was use clockwork recovery to make a back up img of her phone and then i flashed it and it had all her data and the phone went in to safe mode so i factory reset and its now all fine and working with the original rom
I used this tutorial to root my HTC Desire:
http://techspalace.blogspot.com/2011/10/perm-root-htc-desire-gingerbread-233.html
Then I was using it for half a year and few days ago I downloaded LeeDroid 3.3.3 data ++ and successfully installed it but I had only 120mb free internal memory for apps with it. I was googlin a lot and i realized that Im using wrong HBoot (im newbie in that stuff). Then I found this tutorial how to flash cm7r2 hboot on desire (its required for leedroid ROM)
http://forum.xda-developers.com/showthread.php?t=1223856
I followed the steps, downloaded http://alpharev.nl/PB99IMG_cm7r2.zip then I copied it to my SD card and renamed it to PB99IMG and rebooted my phone. It asked me if i want to update, i chose yes but then i rebooted and got stuck at HTC logo and white screen.
So I tried to restore my previous ROM via ClockworkMod Recovery 5.0.2.0 but still Im stuck at HTC logo
(after restoring it says:
Restore complete!
E: Error in /cache/recovery/log
(No space left on device)
E: Error in /cache/recovery/last_log
(No space left on device)
Im not really skilled in all these things, can someone pls give me an advice how to get back on Revolutionary hboot and my old ROM or how to get this Alpharev cm7r2 bootloader working?
EDIT: Now i managed to install leedroid from sd again, but there was force closes of everything so I did factory reset and now I pass HTC logo but Im stuck at glowing "ANDROID" logo..... really need help
I think that if I would manage to get "revolutionary" back instead of "Alpharev cm7 r2" at bootloader, my old ROM backup would work.... but i dont know how to get "Revolutionary" bootloader back !
Hi,
you might want to try the following:
Download fastboot commander from http://forum.xda-developers.com/showthread.php?t=1193915
Download the desired HBOOT from http://alpharev.nl/
Select the HBOOT that matches the ROM you want to install
Start the fastboot program, plug in your phone with USB (powered off) and start the phone in BOOTLOADER modus (VOLUME-DOWN + POWER)
there is an option fastboot, press it. You're now able to flash your HBOOT with fast commander.
Unzip the bravo_xxxx.zip so you get an xxx.img file. load this file in Fastboot->[TAB]Hboot, Radio & Rec->Hboot and press Flash Hboot. Wait for an OK.
Exit fastboot and go to recovery. Search for USB Mount (mount your SD-CARD to the USB) and search this SD-CARD in Windows Explorer. Copy the ROM in zip format you want to install on your SD-CARD and unmount.
Now select the option install from SD and select the zip file. Let it run and reboot.
(If you selected a rom which needs an EXT2 EXT3 or EXT4 partition, then partition this first, this is also possible in the recovery menu).
Hope this helps...
dingelen said:
Hi,
you might want to try the following:
Download fastboot commander from http://forum.xda-developers.com/showthread.php?t=1193915
Download the desired HBOOT from http://alpharev.nl/
Select the HBOOT that matches the ROM you want to install
Start the fastboot program, plug in your phone with USB (powered off) and start the phone in BOOTLOADER modus (VOLUME-DOWN + POWER)
there is an option fastboot, press it. You're now able to flash your HBOOT with fast commander.
Unzip the bravo_xxxx.zip so you get an xxx.img file. load this file in Fastboot->[TAB]Hboot, Radio & Rec->Hboot and press Flash Hboot. Wait for an OK.
Exit fastboot and go to recovery. Search for USB Mount (mount your SD-CARD to the USB) and search this SD-CARD in Windows Explorer. Copy the ROM in zip format you want to install on your SD-CARD and unmount.
Now select the option install from SD and select the zip file. Let it run and reboot.
(If you selected a rom which needs an EXT2 EXT3 or EXT4 partition, then partition this first, this is also possible in the recovery menu).
Hope this helps...
Click to expand...
Click to collapse
Thank you for the reply, but I will try this and some new ROM later, right now I really need my phone working because I will have to use it yesterday whole day at work.... so please can you tell me how to get back to Revolutionary bootloader (i think its the stock Hboot but im not sure, im noob at that ( ) and how to get my old backups workin
marwinx said:
Thank you for the reply, but I will try this and some new ROM later, right now I really need my phone working because I will have to use it yesterday whole day at work.... so please can you tell me how to get back to Revolutionary bootloader (i think its the stock Hboot but im not sure, im noob at that ( ) and how to get my old backups workin
Click to expand...
Click to collapse
Now im about to copy the zip file with ROM to SD card, but I want the ROM I had right after the ROOT I did according to the tutorial here:
techspalace.blogspot.com/2011/10/perm-root-htc-desire-gingerbread-233.html
Is the file on the tutorial page called "su-2.3.6.3-efgh-signed.zip" the ROM file I need to copy to SD card? reply pls
dingelen said:
Hi,
you might want to try the following:
Download fastboot commander from http://forum.xda-developers.com/showthread.php?t=1193915
Download the desired HBOOT from http://alpharev.nl/
Select the HBOOT that matches the ROM you want to install
Start the fastboot program, plug in your phone with USB (powered off) and start the phone in BOOTLOADER modus (VOLUME-DOWN + POWER)
there is an option fastboot, press it. You're now able to flash your HBOOT with fast commander.
Unzip the bravo_xxxx.zip so you get an xxx.img file. load this file in Fastboot->[TAB]Hboot, Radio & Rec->Hboot and press Flash Hboot. Wait for an OK.
Exit fastboot and go to recovery. Search for USB Mount (mount your SD-CARD to the USB) and search this SD-CARD in Windows Explorer. Copy the ROM in zip format you want to install on your SD-CARD and unmount.
Now select the option install from SD and select the zip file. Let it run and reboot.
(If you selected a rom which needs an EXT2 EXT3 or EXT4 partition, then partition this first, this is also possible in the recovery menu).
Hope this helps...
Click to expand...
Click to collapse
OK I finally managed to get out of that sh*t... I flashed my HBoot with fastboot commander using the Stock Bravo IMG and then I restored one of my old backups in recovery menu... now it works fine again, thank you very much
i made a mistake transforming my one m8 to GPE with a gsm guide and my phone is verizon with gsm system too, now my device is stuck into bootloader only can flash twrp but cant intall any rom, i get error FAILED )remote not allowed) from fastboot get error can run update in zip file, Im really sad cant do anything, please somebody help me.
Reards
xrodx said:
i made a mistake transforming my one m8 to GPE with a gsm guide and my phone is verizon with gsm system too, now my device is stuck into bootloader only can flash twrp but cant intall any rom, i get error FAILED )remote not allowed) from fastboot get error can run update in zip file, Im really sad cant do anything, please somebody help me.
Reards
Click to expand...
Click to collapse
Did you use the sdcard 0P6BIMG.zip ruu method to fully convert.
Pull out your external sdcard and put it in another device so you can remove/relocate the "0P6BIMG.zip" file from sdcard.
Now boot to hboot and choose fastboot, now plug your phone in and it should state "fastboot usb" (run your commands again)
jball said:
Did you use the sdcard 0P6BIMG.zip ruu method to fully convert.
Pull out your external sdcard and put it in another device so you can remove/relocate the "0P6BIMG.zip" file from sdcard.
Now boot to hboot and choose fastboot, now plug your phone in and it should state "fastboot usb" (run your commands again)
Click to expand...
Click to collapse
Yes i download the file from here:
http://www.droidviews.com/restore-verizon-htc-one-m8-to-stock-rom-with-ruu/
When i fla**** get this via fat32 sd card
Download Factory nandroid backup, when i restore the device restore data and boot ok but restore system fail
I have a problem with the system partition, anyone know how can i fix this?
Please help
@xrodx
Did you format the sdcard using your computer?
When I formated mine I used my HTC one m8 and it formated it "vfat" so I want to recommend trying vfat
My phone its ok
I do this:
Flash firmware, boot and recovery 4.4.4 from here:
http://forum.xda-developers.com/showthread.php?t=2723159
Flash TWRP for verizon found here:
http://forum.xda-developers.com/ver...ent/ruu-m8vzw-4-4-4-s-off-onlynewest-t2914914
I flashed this ROM via TWRP, do a fulll wipe first:
http://forum.xda-developers.com/showthread.php?t=2716306
Works fine now, thanks guys for your help :good::good::laugh::laugh::laugh: