Related
I have the newest Blazer and my jig does not take away the odin count or triangle. Any help for this. I was in the actual rom thead its 500 pages long....
Thanks
Works for me. Do you turn the phone completely off then plug it in?
Sent from my Epic™ 4G Touch
You might want to try to Odin back to a stock EL29 - sfhub is the MAN for this http://forum.xda-developers.com/showthread.php?t=1433101 you can choose to save data or do a complete wipe; probably best to just wipe the whole thing. Then put on CWM+Rogue's recovery [it is NOT the touch recovery - YOU DON'T WANT THAT!] instructions for that are also in sfhub's post - read throroughly. Then apply Phantom Hackers Blazer ROM afterwards. Been running Blazer for a while now and found it to be the best ROM for me. Good luck.
leaderbuilder said:
You might want to try to Odin back to a stock EL29 - sfhub is the MAN for this http://forum.xda-developers.com/showthread.php?t=1433101 you can choose to save data or do a complete wipe; probably best to just wipe the whole thing. Then put on CWM+Rogue's recovery [it is NOT the touch recovery - YOU DON'T WANT THAT!] instructions for that are also in sfhub's post - read throroughly. Then apply Phantom Hackers Blazer ROM afterwards. Been running Blazer for a while now and found it to be the best ROM for me. Good luck.
Click to expand...
Click to collapse
I went back to complete stock using sfhubs package then install one click put on rogues recovery. reflashed my nandroid and all is good. I must of picked something up along the many roms I flash. I did use a different method of going to stock before with no help...hmmm
Appreciate your help. Thanks
Ok new problem, where is the camera zoom? also sometimes when receiving a call you cannot answer it..I get the screen but the touch screen does not work?
Thanks
What exactly is the odin count? How is it bad? and how can I check if mine is still at 0?
Ind3lible said:
What exactly is the odin count? How is it bad? and how can I check if mine is still at 0?
Click to expand...
Click to collapse
If you do not have a yellow triangle during the start of booting on your hone then you do not have an Odin count that goes over 0. After for what it does it tells your cell provider if you have flashed a custom anything pretty much.
U have to flash the SBL for the EG30 or EG31 roms. The newer bootloaders stopped the jig from working.
Sent from my Nexus S 4G using xda premium
cidica said:
If you do not have a yellow triangle during the start of booting on your hone then you do not have an Odin count that goes over 0. After for what it does it tells your cell provider if you have flashed a custom anything pretty much.
Click to expand...
Click to collapse
Oh I see OK cool man. I have flashed roms but no triangle. Yay!
Do I Just use the sfhub one click odin? Sorry if this has been asked a million times but I really dont wanna brick my device. I dont wanna get stuck at that data.img like so many others have.
rbtrucking said:
Do I Just use the sfhub one click odin? Sorry if this has been asked a million times but I really dont wanna brick my device. I dont wanna get stuck at that data.img like so many others have.
Click to expand...
Click to collapse
That is probably the safest way. You can odin the stock EL26 CWM as a shortcut instead but I prefer to do the one click odin back to stock personally. I don't plan on going back and forth much anyway .
I've tried ics less than a half dozen times. I've always just Odin one click to EL29.
Ya I might just stick with it I did a factory data reset then all the force closes stopped and I am running good now but it is always nice to know how to get back safely. When you say the one click you mean the latest sfhub one right?
rbtrucking said:
Ya I might just stick with it I did a factory data reset then all the force closes stopped and I am running good now but it is always nice to know how to get back safely. When you say the one click you mean the latest sfhub one right?
Click to expand...
Click to collapse
I use the same EL29 stock rooted Oscar does I think:
http://forum.xda-developers.com/showthread.php?t=1433101
I know there are one click restores for ICS but I prefer to go back to GB stock rooted.
I used the odin OC to update to the leaked FH13 and am having all sorts of problems that I've seen others are having. what is the best way to go back to FF18 stock or rooted if I have to. Can I use another odin OC or do I need to do something else?
tonydelante said:
I used the odin OC to update to the leaked FH13 and am having all sorts of problems that I've seen others are having. what is the best way to go back to FF18 stock or rooted if I have to. Can I use another odin OC or do I need to do something else?
Click to expand...
Click to collapse
use sfhub's one-click 'Reset Data' Odin to get FF18 stock. Simple done
leaderbuilder said:
use sfhub's one-click 'Reset Data' Odin to get FF18 stock. Simple done
Click to expand...
Click to collapse
can I get a link since all I've seen is the rooted version?
Also, can this be done with the newer FH13? If so could I use it to back to a previous version like GB?
tonydelante said:
can I get a link since all I've seen is the rooted version?
Also, can this be done with the newer FH13? If so could I use it to back to a previous version like GB?
Click to expand...
Click to collapse
Several different options with the questions you're asking. Without knowing your end goal, it's a guessing game.
And I guess i should say - back up any data, files etc prior to making changes unless you don't care about losing what's on your phone. Sync your contacts, save your messages, etc, etc, etc.
You can use the rooted ff18 (reset data) and then use the autoroot package to unroot if you want to be on ICS and don't care about trace files or folders being left.
If you want to go back completely stock, no root, and clean up your storage - Use the EK02, Rest Data, One Click. Don't apply the OTA update to EL29 just yet, do a factory reset and option to format USB, restart and let the OTA process take you all the way to FF18.
Yes, either way, with one clicks, it is safe to do from FH13. Do NOT perform a factory reset until you're back on GB.
FH13
Hey,
Similar issue to OP but I'll be specific. I had FF18, not rooted, and used ODIN (for the first time I might add) to upgrade to FH13. Now I'm having issues and just want to revert to FF18. How can I accomplish this? I might add, I didn't get FF18 OTA, I went to qbking's instructions to update it manually. Easiest way to get back?
Thanks.
nickknaack said:
Hey,
Similar issue to OP but I'll be specific. I had FF18, not rooted, and used ODIN (for the first time I might add) to upgrade to FH13. Now I'm having issues and just want to revert to FF18. How can I accomplish this? I might add, I didn't get FF18 OTA, I went to qbking's instructions to update it manually. Easiest way to get back?
Thanks.
Click to expand...
Click to collapse
Odin sfhubs ff18 1 click, then unroot if you want to
Sent from my SPH-D710 using Tapatalk 2
nickknaack said:
Hey,
Similar issue to OP but I'll be specific. I had FF18, not rooted, and used ODIN (for the first time I might add) to upgrade to FH13. Now I'm having issues and just want to revert to FF18. How can I accomplish this? I might add, I didn't get FF18 OTA, I went to qbking's instructions to update it manually. Easiest way to get back?
Thanks.
Click to expand...
Click to collapse
If you are just looking to go back quickly, and don't care if you have root or not, just use the FF18 Reset Data One Click from Sfhub. (Some say using the No Data within ICS to ICS isn't an issue, but I always reset data to avoid any issues that may arise..)
If you want to go back completely stock, no root, I'd recommend the post above yours starting back at EK02. Just the easiest in my mind, although others have different steps. Less user actions needed that way, just longer in the automatic process...
MoHoGalore said:
If you are just looking to go back quickly, and don't care if you have root or not, just use the FF18 Reset Data One Click from Sfhub. (Some say using the No Data within ICS to ICS isn't an issue, but I always reset data to avoid any issues that may arise..)
If you want to go back completely stock, no root, I'd recommend the post above yours starting back at EK02. Just the easiest in my mind, although others have different steps. Less user actions needed that way, just longer in the automatic process...
Click to expand...
Click to collapse
If you go back to EK02, how long does it take to get the ota's? also will you get each update, or just the FF18?
Is this any different than the FF18 OC then unrooting?
MoHoGalore said:
If you are just looking to go back quickly, and don't care if you have root or not, just use the FF18 Reset Data One Click from Sfhub. (Some say using the No Data within ICS to ICS isn't an issue, but I always reset data to avoid any issues that may arise..)
If you want to go back completely stock, no root, I'd recommend the post above yours starting back at EK02. Just the easiest in my mind, although others have different steps. Less user actions needed that way, just longer in the automatic process...
Click to expand...
Click to collapse
Sidenote: on another phone I'm running CM9 with cwm recovery. can I use Odin one clicks over this or is there another step first?
tonydelante said:
If you go back to EK02, how long does it take to get the ota's? also will you get each update, or just the FF18?
Is this any different than the FF18 OC then unrooting?
Click to expand...
Click to collapse
tonydelante said:
Sidenote: on another phone I'm running CM9 with cwm recovery. can I use Odin one clicks over this or is there another step first?
Click to expand...
Click to collapse
Takes me probably an hour for total reset. If I want the phone to be pure stock. I don't try to rush. Bad things happen then. And yes, its an incremental update process. Some people stop and don't chose the ff18 update and use the notification killer. (if you don't have a great connection, then this wouldn't be the ideal way.)
I would say that the one click would be the same regardless of current build. (I don't use cm builds) Its suggested to go into recovery and wipe all by some prior.
I usually pause on el29 and do a factory reset. That's just the way I do it.
Sent from my SPH-D710 using xda app-developers app
I ran through what was suggested, starting with ek02 and ending with an ff18 from ota. Everything took about an hour and was painless. Thanks for all the help and patience on the topic!
nickknaack said:
I ran through what was suggested, starting with ek02 and ending with an ff18 from ota. Everything took about an hour and was painless. Thanks for all the help and patience on the topic!
Click to expand...
Click to collapse
Outstanding! Thanks for the update!:good:
Just to update as well, everything worked out well for me too.
tonydelante said:
Just to update as well, everything worked out well for me too.
Click to expand...
Click to collapse
Outstanding sir. I was going to pm you and ask. Thanks for the update.:beer:
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
This is the first time I have used Kies to update a phone. My GF doesn't want to root her phone. I used kies, everything looked like it went fine but we only get to the homescreen and afer 3 or 5 seconds her phone just reboots itself. Is there anyway to fix this?
Can I reupdate manually using a External SDcard or something?
try booting into recovery and doing a factory reset
jerrycoffman45 said:
try booting into recovery and doing a factory reset
Click to expand...
Click to collapse
THis will work but she'll lose all her data and I didn't back it up. Is there a way I can reapply a update ZIP through recovery?
not that i am aware of you could try this
http://forum.xda-developers.com/showthread.php?t=2031840
jerrycoffman45 said:
not that i am aware of you could try this
http://forum.xda-developers.com/showthread.php?t=2031840
Click to expand...
Click to collapse
I'm sorry for not being able to do all the research myself, but my GF has to meet her parents somewhere, we can't even call them with this problem. Would this method delete her data or just restore Jelly Bean on it?
What is the official model for ATT JB? Is this the stock JB?
http://forum.xda-developers.com/showthread.php?t=1886709
SlimJ87D said:
THis will work but she'll lose all her data and I didn't back it up. Is there a way I can reapply a update ZIP through recovery?
Click to expand...
Click to collapse
Do nandroid backup in CWM, then try clear data to factory and restore nandroid..
BTW: in my signature is info how to restore to factory but first do nandroid...
nope thats bell and the link i gave does not wipe
jerrycoffman45 said:
nope thats bell and the link i gave does not wipe
Click to expand...
Click to collapse
Thanks guys. I'll give this one a try. I just need to put the phone in download mode and update using the UNROOTED_ATT_i747UCDLK3
It should probably just reapply the update over again and hopefully fix things and keep her root. I hope this is the quickest fix.
SlimJ87D said:
Thanks guys. I'll give this one a try. I just need to put the phone in download mode and update using the UNROOTED_ATT_i747UCDLK3
It should probably just reapply the update over again and hopefully fix things and keep her root. I hope this is the quickest fix.
Click to expand...
Click to collapse
if she is rooted after using that one she wont be
jerrycoffman45 said:
if she is rooted after using that one she wont be
Click to expand...
Click to collapse
Yes, she is not rooted, she doesn't want her flash counter going up, etc.
ok that one wont trip it but if that is why she doesnt want root triangle away app will reset it
Problem didn't get fixed... I just don't get what could be wrong with the phone. It starts up fine, and for abotu 10 seconds it's fine but then something gets opened that must cause it to reboot. I don't know what service could be causing it to reboot. I wish I could at least backup all her data before the damn phone reboots itself.
download the stock ics firmware odin it that might work but you will probably still bootloop factory reset might be the only answer
http://forum.xda-developers.com/showthread.php?t=1968625 lg1 is the one you want
jerrycoffman45 said:
download the stock ics firmware odin it that might work but you will probably still bootloop factory reset might be the only answer
http://forum.xda-developers.com/showthread.php?t=1968625 lg1 is the one you want
Click to expand...
Click to collapse
Thank you so much for trying to help me through this. I really should have backed up her data, but I thought it was KIES and I wouldn't have to worry about any stupid problems happening.
First question is, is there anyway I can retrieve and backup her data without rooting? I know it's a longshot, but in recovery can I connect to ADB or something and extract stuff?
Second question, is there a update.zip of the jelly bean I could possibly give a try? I can still put and install update.zips through an external SD card.
I'm going to give the ICS firmware a try, hopefully it retains her data, but I've never downgraded before in hopes of keeping data. I just need to backup her text, phone, apps with kies and try teh update again.
SlimJ87D said:
Thank you so much for trying to help me through this. I really should have backed up her data, but I thought it was KIES and I wouldn't have to worry about any stupid problems happening.
First question is, is there anyway I can retrieve and backup her data without rooting? I know it's a longshot.
Second question, is there a update.zip of the jelly bean I could possibly give a try? I can still put and install update.zips through an external SD card.
I'm going to give the ICS firmware a try, hopefully it retains her data, but I've never downgraded before in hopes of keeping data. I just need to backup her text, phone, apps with kies and try teh update again.
Click to expand...
Click to collapse
first question if you can get the computer to see the internal sd card you could copy stuff that way but with it boot looping its not likely
secound question have not seen one but that doesnt meen there isnt one but att didnt do the update ota so i would think there isnt
jerrycoffman45 said:
first question if you can get the computer to see the internal sd card you could copy stuff that way but with it boot looping its not likely
secound question have not seen one but that doesnt meen there isnt one but att didnt do the update ota so i would think there isnt
Click to expand...
Click to collapse
screw it... I rooted her phone, I think this is the only way I can fix it. So I am going to try and make a back up using recovery, then factory reset, format system data and then try restoring her phone. I'll let you know how that goes.
Is there a sticky here that gets your phone back to stock and resets the counter? Or does rooting not affect the counter?
SlimJ87D said:
screw it... I rooted her phone, I think this is the only way I can fix it. So I am going to try and make a back up using recovery, then factory reset, format system data and then try restoring her phone. I'll let you know how that goes.
Is there a sticky here that gets your phone back to stock and resets the counter? Or does rooting not affect the counter?
Click to expand...
Click to collapse
Root it. Use Triangle Away to reset counter and get rid of the triangle too. Also you could always Odin flash the firmware. Doesn't delete data... Done the same with my I9300. Wanted the XXELKC firmware and didn't delete data. Also worked with GF's I9305.
Its free on XDA from Chain fire and requires Super User. After doing that you can Odin that latest firmware and it'll be on stock.
Sent from my Nexus 4 using xda premium
the app triangle away will reset it i think you can get it for free here on xda but i bought it in the app store you have to be rooted to use it
weeo said:
Root it. Use Triangle Away to reset counter and get rid of the triangle too. Also you could always Odin flash the firmware. Doesn't delete data... Done the same with my I9300. Wanted the XXELKC firmware and didn't delete data. Also worked with GF's I9305.
Its free on XDA from Chain fire and requires Super User. After doing that you can Odin that latest firmware and it'll be on stock.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
This day just gets worse... I backed up her device using recovery and then continued to format and wipe everything and then guess what. When I go to restore
"MD5 MISMATCH"
Now I'm trying to perform the following to fix it...
http://forum.xda-developers.com/showthread.php?t=1835914
SlimJ87D said:
This day just gets worse... I backed up her device using recovery and then continued to format and wipe everything and then guess what. When I go to restore
"MD5 MISMATCH"
Now I'm trying to perform the following to fix it...
http://forum.xda-developers.com/showthread.php?t=1835914
Click to expand...
Click to collapse
Try it. Good luck.
Sent from my Nexus 4 using xda premium
I'm having some issues with my phone rebooting or powering off frequently, especially when I plug it into a charger. I don't think I have the power button issue. I suspect it is the battery (although the battery was replaced Oct 2012 at the sprint store) and have another on the way. I want to exhaust every possible option in testing, so I want to take my phone to off the shelf stock. I currently am running rooted sprint JB, and I am looking for a way to remove all user files on internal storage as well as the tweaks (have comadose installed and had kobridge before) just to make sure it is not from a bad flash. I know how to go back to stock unrooted GB27 with Nodata via ODIN, however I want to make sure ALL tweaks and user files are removed too. Ideas?
chaosbuzz said:
I'm having some issues with my phone rebooting or powering off frequently, especially when I plug it into a charger. I don't think I have the power button issue. I suspect it is the battery (although the battery was replaced Oct 2012 at the sprint store) and have another on the way. I want to exhaust every possible option in testing, so I want to take my phone to off the shelf stock. I currently am running rooted sprint JB, and I am looking for a way to remove all user files on internal storage as well as the tweaks (have comadose installed and had kobridge before) just to make sure it is not from a bad flash. I know how to go back to stock unrooted GB27 with Nodata via ODIN, however I want to make sure ALL tweaks and user files are removed too. Ideas?
Click to expand...
Click to collapse
The only thing I can say is if you have a CWM recovery installed boot into it and wipe all storage areas with that, then use the ODIN one-click RESTORE version (not NODATA as RESTORE will wipe all user data from the phone). That's about the best I can do for you. I just did it the other day to my phone and it wiped literally everything from the device, including the custom boot-screen.
http://forum.xda-developers.com/showthread.php?t=2191954
A slip of the tongue, I meant restore, not nodata. I can mobileodin el29 directboot. What should I do in CWM to ensure all internal storage, system data, and tweaks is completely wiped? I usually use JB format all x2 but that doesn't delete pictures etc, so I am assuming it's leaving possible conflicts from flashing roms
OK, I flashed el29 directboot to CWM, formatted EVERYTHING I had an option to in CWM, did a restore to stock unrooted but it still knew my wifi password when the phone powered on which makes me think not all the data had been reset...
Try stock recovery do a "factory reset"after that it should ask you for wifi password.
Pp.
Sent from a jelly bean shooting Epic. In your eye ....... phone.
chaosbuzz said:
A slip of the tongue, I meant restore, not nodata. I can mobileodin el29 directboot. What should I do in CWM to ensure all internal storage, system data, and tweaks is completely wiped? I usually use JB format all x2 but that doesn't delete pictures etc, so I am assuming it's leaving possible conflicts from flashing roms
Click to expand...
Click to collapse
If you are rooted, use Mobile Odin Lite to flash a stock EL29 KERNEL (.tar). - I would highly suggest this particular way as it's how I do it and I've never had any issues doing it with Mobile Odin Lite. Mobile Odin Lite
If you're going to use CWM to flash the stock EL29 KERNEL, use the .zip version.
You could also always try the One-Click EL29 KERNEL, but I've never used a One-Click before so I can't help you on that process but I'd imagine it's the same as flashing the ROM with a One-Click.
http://www.rwilco12.com/downloads.p...int) (SPH-D710)/Kernels/Stock (TW) Kernels/GB
After that just do a factory reset through the stock recovery. You should be all set after that.
SOURCE for KERNELS - Thanks rwilco12. *tips hat*
SOURCE for Mobile Odin Lite - Thanks Chainfire *tips hat*
Kherr said:
If you are rooted, use Mobile Odin Lite to flash a stock EL29 KERNEL (.tar). - I would highly suggest this particular way as it's how I do it and I've never had any issues doing it with Mobile Odin Lite. Mobile Odin Lite
If you're going to use CWM to flash the stock EL29 KERNEL, use the .zip version.
You could also always try the One-Click EL29 KERNEL, but I've never used a One-Click before so I can't help you on that process but I'd imagine it's the same as flashing the ROM with a One-Click.
http://www.rwilco12.com/downloads.p...int) (SPH-D710)/Kernels/Stock (TW) Kernels/GB
After that just do a factory reset through the stock recovery. You should be all set after that.
SOURCE for KERNELS - Thanks rwilco12. *tips hat*
SOURCE for Mobile Odin Lite - Thanks Chainfire *tips hat*
Click to expand...
Click to collapse
I used mobile odin lite to flash EL29 directboot kernel. This allows the use of CWM after flashing the kernel. Once in CWM I formatted everything I could in CWM and formatted cache and dalvik. From there, I used a one click desktop ODIN to flash stock sprint unrooted. IAfter all this, I am still having issues with constant restarts. I replaced the battery and am still having the problem. I am unsure if this is software or I have a power button issue. Does anyone have any tips I can try?
chaosbuzz said:
I used mobile odin lite to flash EL29 directboot kernel. This allows the use of CWM after flashing the kernel. Once in CWM I formatted everything I could in CWM and formatted cache and dalvik. From there, I used a one click desktop ODIN to flash stock sprint unrooted. IAfter all this, I am still having issues with constant restarts. I replaced the battery and am still having the problem. I am unsure if this is software or I have a power button issue. Does anyone have any tips I can try?
Click to expand...
Click to collapse
Well, then I'd probably say it's a power button issue, but I've also heard of moisture in the charger port (not necessarily liquid damage, could just be moisture in the air) might cause random bootloops as well. Could be a number of things, but you've stamped out your issue from being software related (as far as I can see). Sorry I couldn't be of more help to you.
Depending on what stock ROM you want there's a one click you run through odin that's wipes the internal memory as well
Sent from my SPH-D710 using xda app-developers app
Oh man... This is bad. You don't have to do all that confusing stuff!
Here is the link for the stock FL24 build for E4GT D710:
http://www.sxtpdevelopers.com/showthread.php?t=116
Download that file, run it, put phone into recovery, plug phone into computer and press start once "COM" shows up on the one-click...the usual. When I use this, once the phone boots up I always just go into settings-->privacy-->restore phone and check format USB (that is if you want everything deleted off your SD card). I back everything up to my 64GB removable sd card before I do this.
Hope I helped!
Sent from my SPH-D710 using xda app-developers app
smsnodgrass said:
Oh man... This is bad. You don't have to do all that confusing stuff!
Here is the link for the stock FL24 build for E4GT D710:
http://www.sxtpdevelopers.com/showthread.php?t=116
Download that file, run it, put phone into recovery, plug phone into computer and press start once "COM" shows up on the one-click...the usual. When I use this, once the phone boots up I always just go into settings-->privacy-->restore phone and check format USB (that is if you want everything deleted off your SD card). I back everything up to my 64GB removable sd card before I do this.
Hope I helped!
Sent from my SPH-D710 using xda app-developers app
Click to expand...
Click to collapse
Just curious, but any particular reason why flashing to stock ICS may be better than stock JB in this case?
Thanks.
chaosbuzz said:
Just curious, but any particular reason why flashing to stock ICS may be better than stock JB in this case?
Thanks.
Click to expand...
Click to collapse
It's not. I don't think he realizes that JB has gone official.
Sent from my SPH-D710 using xda premium
chaosbuzz said:
Just curious, but any particular reason why flashing to stock ICS may be better than stock JB in this case?
Thanks.
Click to expand...
Click to collapse
graydiggy said:
It's not. I don't think he realizes that JB has gone official.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I go back to ICS because, at least in my area, 4.1.2 JB has not gone OTA which, imo, you can't go wrong with it. It's stable and it's just what I do. I'll eventually switch to a stock JB build for a one-click restore, just not yet. I'm not living under a shell I know JB has gone official.
smsnodgrass said:
I go back to ICS because, at least in my area, 4.1.2 JB has not gone OTA which, imo, you can't go wrong with it. It's stable and it's just what I do. I'll eventually switch to a stock JB build for a one-click restore, just not yet. I'm not living under a shell I know JB has gone official.
Click to expand...
Click to collapse
JB is not an area specific thing... You can only officially get it over the wire from Samsung's site or by using kies. They will not do it over the air. So no matter where you are in the world, JB is official for all three variants of the E4GT.
ICS is the worst thing to hit the E4GT and is not stable. You obviously do live under a shell if you think it is. IMO, CM10.1 is more stable.
So, let's try not to make poor excuses with completely wrong information when posting next time.
Sent from my SPH-D710 using xda premium
graydiggy said:
JB is not an area specific thing... You can only officially get it over the wire from Samsung's site or by using kies. They will not do it over the air. So no matter where you are in the world, JB is official for all three variants of the E4GT.
ICS is the worst thing to hit the E4GT and is not stable. You obviously do live under a shell if you think it is. IMO, CM10.1 is more stable.
So, let's try not to make poor excuses with completely wrong information when posting next time.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Hahaha woah there dood...let's not get offensive, no need to be so harsh! If I've learned anything from Miley Cirus it's that
1) never let your weed-eater cut your hair and...
2)Everybody makes mistakes :good: :good:
Jesus man, sorry I haven't devoted my life to learning everything there is to know about cell phones just so I can take people down and attack them on online forums. Although, if that's all you can do to boost your self-esteem, then go for it. make me feel stupid! I am living under a shell. I make poor excuses. I am an idiot. I know nothing about anything. I should probably rethink my life.
Thank you, Mr. "Graydiggy" for this eye-opening experience
Rough night for me. My bad. All I am saying is that you should take more time to read. A little bit of bad advice could render someone's phone unusable. Even though your advice was decent, you could have possibly left someone in the dark when it comes to a much better version to use.
Like you said, mistakes are made, but some mistakes can cost hundreds of dollars. Its better to know what you are talking about and if you aren't sure, search for the answer.
Sent from my SPH-D710 using xda premium
graydiggy said:
ICS is the worst thing to hit the E4GT and is not stable. You obviously do live under a shell if you think it is. IMO, CM10.1 is more stable.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Gee, grey didn't know you felt that way about ics.?
And people kept telling me I was crazy!
Pp. :beer::thumbup:
From my Epic Touch full of Xparent Blue Tapatalk 2.
graydiggy said:
Rough night for me. My bad. All I am saying is that you should take more time to read. A little bit of bad advice could render someone's phone unusable. Even though your advice was decent, you could have possibly left someone in the dark when it comes to a much better version to use.
Like you said, mistakes are made, but some mistakes can cost hundreds of dollars. Its better to know what you are talking about and if you aren't sure, search for the answer.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yeah I gotchu maynee..no worries, I was just kinda posting what I do and I still don't really think running a ics one-click versus a 4.1.2 one-click is a hundred(s) dollar midtake. For some reason though I hadn't even thought about downloading a 4.1.2 one-click. probably a lot easier and hassle free?
Its not that it is a costly mistake, but it can be quite troublesome. I was saying that one should know every detail of something before posting. I have seen many a brick happen do to someone saying to do one thing that was completely wrong. So even if it has no potential of bricking you, take into account that it could just be wrong.
GB27 Is the best in terms of stock ROMs. People that say otherwise either don't know what they are talking about or it's horrible user error and misinformation.
Sent from my SPH-D710 using xda premium