I tried to do a harmless one click root 3.006 for eb13 downloaded of xda. USB debugging was on and then i ran the unzipped folder to install cwm3 on my phone. i had an error the first time and the second time everything seemed to work fine until the very end it said error phone offline error zimage file missing. so i went to exit out and reboot my phone, and when i when to turn my phone back on i could not get past the 1st screen the SAMSUNG samsungmobile screen. usb debugging is still on and my computer still recognizes the phone when plugged into usb but... Is there anything at all i can do? please help
Try and odin back to stock. If you click on the link in my signature I've made a video showing you how to use odin.
Sent from my SPH-D700 using XDA App
yup, try to ODIN back to stock.
Also you may want to try re-downloading the once click root, just to be safe. Run it again and make sure you have an EXT4 compatible kernel/ROM on your sd card before hand. You'll have to flash that once you boot into CWM.
i can get into download mode, but i havent flashed a rom yet. all i did was try to root my phone with one click root. should i still try odin
yes, ODIN back to stock and try again. One click root 3.0.0.6 is only if you want to convert to EXT4. If this is the case, you have to flash a compatible kernel and rom.
If you do NOT want to convert, then use the one click root 2.X.X.X. You will not have flash anything else and you will be rooted.
Or if you want to make things even easier, check out the development section and ODIN the stock plus rom. It's pre-rooted, RFS or EXT4, and has additional tweaks to make life good.
http://forum.xda-developers.com/showthread.php?t=1061912
what pit file should i use for odin, and where can i find it?
qbking77 your videos good but the pit file is no longer available in the link you provided
Current Odin, PIT, TAR, and instructions: http://tinyurl.com/epicfix
Dyehya/Cyc's guide, my files.
Ignorance1, please don't double post.
Wont recognize usb when in download mode
should i just plan on getting a new phone? Now that my phone is effed my computer will not recognize it in download mode it says device unknown or malfunctioned, It wont let me choose samsung drivers when selecting drivers from disk or anything
Ignorance1 said:
should i just plan on getting a new phone? Now that my phone is effed my computer will not recognize it in download mode it says device unknown or malfunctioned, It wont let me choose samsung drivers when selecting drivers from disk or anything
Click to expand...
Click to collapse
No. Uninstall the drivers and reinstall them, then switch to a non-stock USB cable.
Make the following boxes are checked:
Re-Partiton, Auto-reboot, F. Reset Time. You say check all 3, while qbking77 says to just check auto reboot. what should i do?
Ignorance1 said:
Make the following boxes are checked:
Re-Partiton, Auto-reboot, F. Reset Time. You say check all 3, while qbking77 says to just check auto reboot. what should i do?
Click to expand...
Click to collapse
I don't say check all three - Cyc does. I say check only auto reboot.
screen turned blue at factoryfs.rfs
I saw a progress bar and then when odin got to factoryfs.rfs my phone screen turned blurple, wtf is that?
Ignorance1 said:
I saw a progress bar and then when odin got to factoryfs.rfs my phone screen turned blurple, wtf is that?
Click to expand...
Click to collapse
Good question, are you using the stock cable still? If so... dump it.
Ignorance1 said:
I saw a progress bar and then when odin got to factoryfs.rfs my phone screen turned blurple, wtf is that?
Click to expand...
Click to collapse
possibly a bad flash. Did it fail or pass?
If it failed, try a different USB cable and/or a different USB port. If you are using a desktop computer, make sure you are using USB ports on the back of the tower, instead of front USB ports.
ODIN is a bit wonky at times. If it fails, try, try, try again.
What version of Odin are you using? I still use the old 1.6. The newer versions seem more picky.
after messing around with odin for a good hour and a half qbkings method seemed to work. the newer version of odin blue screened my phone every time. omg im ridiculously thankful for this forum right now. Seeing as one click root effed me in the a last time i think im gonna try to learn how to root manually
Ignorance1 said:
after messing around with odin for a good hour and a half qbkings method seemed to work. the newer version of odin blue screened my phone every time. omg im ridiculously thankful for this forum right now. Seeing as one click root effed me in the a last time i think im gonna try to learn how to root manually
Click to expand...
Click to collapse
It's not the one-click root... It's the horrible stock cable! Trust me!
Buy this and never look back. It's $1.36. Don't have Prime? Choose another seller who ships free from the options.
k0nane said:
It's not the one-click root... It's the horrible stock cable! Trust me!
Buy this and never look back. It's $1.36. Don't have Prime? Choose another seller who ships free from the options.
Click to expand...
Click to collapse
That and not having a compatible EXT4 ROM to flash after the EXT4 conversion was done before rebooting.
ive been using the htc evo cable which works like a charm, im new but not retarded. If you guys swear by one click root i might give it another go. Honestly im running xp and i think the file wasnt fully extracted because one file kept on having an error.
Related
Can someone please help? I bricked my phone trying too flash the modem and I keep trying too recover using Odin. I put the tar file in the pda part and the pit file in the pit section. I got both these files from the how to recover brick thread. But when I click start, it gets stuck on the param.lfs part. And the words PARAM go into the white box above the progess bar. Can someone please help? Im scared its bricked for good.
EDIT: I was able too get passed param.lfs but it keeps freezing in different spots, it never completly finishes. Odin is soo unreliable :/ At one point it got too 50% but my phones screen turned pink and it froze. Is there any other program I can use? Or a more stable/reliable version of odin? I have version 1.0 and i've tried 1.3 and no luck too
sasha101 said:
Can someone please help? I bricked my phone trying too flash the modem and I keep trying too recover using Odin. I put the tar file in the pda part and the pit file in the pit section. I got both these files from the how to recover brick thread. But when I click start, it gets stuck on the param.lfs part. And the words PARAM go into the white box above the progess bar. Can someone please help? Im scared its bricked for good.
Click to expand...
Click to collapse
And this is why I didn't want it going out.
Ok, can you put your phone in downloader mode? If so, go to this thread...
http://forum.xda-developers.com/showthread.php?t=794138
Im using that thread too try too restore, I downloaded the tar and the pit, i tried the one ending with 12 and it didnt work so I tried the pit ending with 13 and it still didnt work. I am a able too go into download mode but it doesnt flash through odin
Can you get into the download mode? If so, you're not bricked.
Sent from my SPH-D700 using XDA App
herzzreh said:
Can you get into the download mode? If so, you're not bricked.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Yeah I can, but when I try too recover too stock, and flash the tar through odin it freezes on param.lfs Can anyone help me with this? Or link me to a thread that someone had this same problem?
sasha101 said:
Im using that thread too try too restore, I downloaded the tar and the pit, i tried the one ending with 12 and it didnt work so I tried the pit ending with 13 and it still didnt work. I am a able too go into download mode but it doesnt flash through odin
Click to expand...
Click to collapse
I had a similar problem awhile ago with a 2.1 flash. It worked out fine. As long as you can get into download mode you should be ok. You don't have a brick.
Just follow the instructions on the flashing back to stock link that is in whodamans post.
I used the .pit in this post http://forum.xda-developers.com/showthread.php?t=773032 with the DI18 update in this one http://forum.xda-developers.com/showthread.php?t=794138
I did have an issue once where I fixed it by just using the DI18 update and not the pit file(it seemed to find the pit in the update i guess...anyone feel free to correct me on this if i'm worng)
If that doesn't work
3a: Reboot your PC and pull the battery on your phone
3b: Wait for PC to reboot
3c: Open Odin
4c: Put batter back in phone, boot to download mode
5c: Once in download mode connect via USB to the PC
6c: Run it again
Click to expand...
Click to collapse
I've yet to see a truly bricked Epic. People that use that word should take that as a sign that they shouldn't be flashing.
I had the exact same problem with Odin freezing at "param.lfs". First of all, Odin is hit and miss. A lot depends on the USB cable as well. I ended up having success with Odin once I switched back to the original cable that came with the phone. Also try different USB ports on your PC. Some people have reported problems when using front panel ports. Try ones in the back that are directly on the mobo.
leatherneck6017 said:
I had the exact same problem with Odin freezing at "param.lfs". First of all, Odin is hit and miss. A lot depends on the USB cable as well. I ended up having success with Odin once I switched back to the original cable that came with the phone. Also try different USB ports on your PC. Some people have reported problems when using front panel ports. Try ones in the back that are directly on the mobo.
Click to expand...
Click to collapse
good point about the cable, although most of the time I see recommendations against using the stock one for anything but charging.
I use a BB cable that seems to be thicker than the stock epic one and haven't had any issues.
Ok, ive gotten passed param but It keeps freezing at different spots! is there anything I can do?
sasha101 said:
Ok, ive gotten passed param but It keeps freezing at different spots! is there anything I can do?
Click to expand...
Click to collapse
try again...
unplug the phone, pull the battery, restart the computer, walk away for 5 minutes and take a breather, then come back and try it again. As the above poster said, Odin can be screwy and it can take multiple times to go through sometimes.
Make sure to use a better usb cable if you have it available, or borrow one from a friend.
also, make sure to restart Odin in between attempts
drakkahn said:
try again...
unplug the phone, pull the battery, restart the computer, walk away for 5 minutes and take a breather, then come back and try it again. As the above poster said, Odin can be screwy and it can take multiple times to go through sometimes.
Make sure to use a better usb cable if you have it available, or borrow one from a friend.
also, make sure to restart Odin in between attempts
Click to expand...
Click to collapse
I've been trying since like 12 PM and its 5 PM now :/ but ill keep trying, thanks.
sasha101 said:
I've been trying since like 12 PM and its 5 PM now :/ but ill keep trying, thanks.
Click to expand...
Click to collapse
Have you tried different USB ports?
leatherneck6017 said:
Have you tried different USB ports?
Click to expand...
Click to collapse
Yea, ok so i kept trying and it none of the tries worked so I just wanted too see if maybe it worked but it wasnt showing that it did. So i click power and it starts too BOOT! it said samsung then went into a black screen, then it went into stock recovery. Can anyone tell me what to do from here? I think there is no rom in my phone and I need a stock samsung one too flash through samsungs recovery. Can anyone help? I apreaticate everyone whos tried too help.
I am using Odin 3 v1.3
I don't use the .PIT file at all.
I put the SPH-D700-DI18-8Gb-REL.tar.md5 in PDA and make sure it's checked
I uncheck F.Reset time
Put the phone in download mode and hit start.
I you still are having problems try a different micro usb cable. Samsungs cable sucks.
Good Luck
Whosdaman said:
And this is why I didn't want it going out.
Click to expand...
Click to collapse
I clicked on this thread because I knew this attitude would be present here. You're saying 1) the reason for the problem is 100% this ROM and 2) no one can be trusted with this ROM because some have had problems... great.
bigray327 said:
I've yet to see a truly bricked Epic. People that use that word should take that as a sign that they shouldn't be flashing.
Click to expand...
Click to collapse
And I also came in to say this, almost. I don't have too much Epic experience, but yes, people always say ZOMG ITS BRICKED and what they MEAN is it isn't behaving how they expected after a flash and it may require a reflash/recovery. If something is bricked, it is a useless mass of plastic and metal that might have some value sold on Ebay as parts.
...though I'm not discouraging people flashing. Just wish people would stop using 'bricked' as a catch phrase, and instead just tell the story and ask for help.
Sasha if you cant use Odin to restore it, then it's bricked. My advice? Take it back to Sprint and get a new one.
infamousjax said:
Sasha if you cant use Odin to restore it, then it's bricked. My advice? Take it back to Sprint and get a new one.
Click to expand...
Click to collapse
What should I say too the sprint employees? I thought bricking the phone ruins the warranty. Also I am able too get too stock recovery and download mode, but odin doesnt flash any rom fully, it always stops. I tried too just flash pit and that worked. Is there any other program you can use or can you flash the tar from the stock recovery which I can get too?
sasha101 said:
What should I say too the sprint employees? I thought bricking the phone ruins the warranty. Also I am able too get too stock recovery and download mode, but odin doesnt flash any rom fully, it always stops. I tried too just flash pit and that worked. Is there any other program you can use or can you flash the tar from the stock recovery which I can get too?
Click to expand...
Click to collapse
Take it from me...only like 1 out of 10 reps even know what bricking means lol
Use this one!!
I was having the same problem, hopeful this one works for you..I wish I can remember who posted this so I can give the person the credit for this find, but anyhow, hope it works...
Earlier today, i used the one click 2.55 root. After that, i tried to install ACS through the recovery, assuming it was like the process with my EVO. However, i got stuck in recovery mode. Then, i found threads about ODEN and then ultimately decided to revert back to stock. However, it kept failing. After that, i thought that my modem was out of date and that if i flashed EC05 it would work on my phone. It didn't. Now i have no recovery and I have no clue what to do to just restore my phone back to factory setting. If someone could guide me through the steps it would be much appreciated.
You need to use odin to flash a stock rom. Just make sure only reboot is the only thing checked on the left side. You dont need a pit file. Just put the full rom tar in the PDA section and hit start bit make sure the phone is recognized by odin first. It will display a box that says "com x" the x will be a number. The number doesn't matter. So keep tryijng with odin its very picky and will sometimes fail for no apparent reason. Just keep trying. If it keeps failing try redownloading the tar file or use a different usb cable. Good luck
Sent From My Evo Killer!
I also meant to say that you needed cwm 3.0.0.6 to use acs rom. You need to be on ext4
Sent From My Evo Killer!
musclehead84 said:
You need to use odin to flash a stock rom. Just make sure only reboot is the only thing checked on the left side. You dont need a pit file. Just put the full rom tar in the PDA section and hit start bit make sure the phone is recognized by odin first. It will display a box that says "com x" the x will be a number. The number doesn't matter. So keep tryijng with odin its very picky and will sometimes fail for no apparent reason. Just keep trying. If it keeps failing try redownloading the tar file or use a different usb cable. Good luck
Sent From My Evo Killer!
Click to expand...
Click to collapse
Thanks a lot. Do you know of any stock roms that i should use? I have the EB13 modem now if that matters. Also, i was on froyo when all of this happened.
I'd like to add if you still have trouble with odin. Use a short good USB cable and make sure your antivirus programs are off on your PC.
I would flash the new ec05 rom so at least you have he latest. It will also flash the modem for you as well
Sent From My Evo Killer!
This happened to me last week! I was able to fix my phone with the generous help of qbking77. He has some how to videos on youtube. And mostly all the links you need on how to's with everything! He helped me out a lot! My phone is now a rescue hope everything works out. Everything everyone is telling you here is correct.
Sent from my SPH-D700 using XDA Premium App
I keep getting stuck at the Kernal portion in Odin. That's where it always fails
bplantonio said:
I keep getting stuck at the Kernal portion in Odin. That's where it always fails
Click to expand...
Click to collapse
OK, when it fails, pull out your battery, disconnect the cable, reinstall the battery, hold the "1" key on the slide out keyboard, push the power button until the yellow download screen comes up. Now with Odin up, only the reboot box checked add the tar file in the PDA section and the Victory8G file in the pit section. Now connect the cable the phone and a COM box should come up. Hit start. If it fails again, try 1 or 2 more times. You may have a bad data cable or connection. Try a different cable and/or usb port.
Also if you want to go to a custom ROM I would recommend using the EB13 prerooted with CWM3 file here:
http://forum.xda-developers.com/showthread.php?t=853209
Use the second file.
It still keeps failing over and over on kernel. I dont think my usb is bad as i just got this phone two days ago. Is there a way i can flash the kernel over so i can make this work? Thanks for all the help by the way. Rooting on the EVO is MUCH easier
Fixed, thanks for the help
I edited my post in the odin thread in dev because I felt like I was hijacking...
So odin see's my phone when the phone is on (yellow com port) . Even during boot up. But it doesn't see it in download mode. I've uninstalled and reinstalled the drivers more than 5 times. I also just went out and bought a new data cable (NOT made my samsung)... Again, odin see's my phone while it's booting, and while it's on normal, but it just doesn't see it when in downloading mode.
Anyone have any tips? Is it possible to do this without being in downloading mode? I've tried every one of the "trouble shooting" tips for odin not seeing the device. Tried all of the usb ports, tried doing it without the battery, it's plugged into a usb port that is directly connected to the mobo.
I'm doing all of this on an older win xp comp. I had to use the win xp machine to root the phone, and it worked fine.
Even with Heimdall I get "failed to detect compatible device"
Have you tried it with the battery out and connected to computer to go into download mode?
kennyglass123 said:
Have you tried it with the battery out and connected to computer to go into download mode?
Click to expand...
Click to collapse
Sorry, I know there's a bit to read in the OP. Just wanted to get all of the info I could in there... But yes, I tried that. Several times actually :-/
Zexter said:
Sorry I know there's a bit to read in the OP, but yes, I tried that. Several times :-/
Click to expand...
Click to collapse
I guess I should have interpretted that from "tried all the troubleshooting tips"
Reading through the OP (again...really) sounds like there is something wrong with your download mode. How about using the Samsung EB13 tool thingy and let it OTA? It is supposed to be more hardy than Odin.
No I haven't tried that. I didn't even know there was a tool. I just came from the heroc to the epic yesterday
What is this tool thingy you speak of ?
[edit] im running syndicate and would like to get back to square one.
Zexter said:
No I haven't tried that. I didn't even know there was a tool. I just came from the heroc to the epic yesterday
What is this tool thingy you speak of ?
[edit] im running syndicate and would like to get back to square one.
Click to expand...
Click to collapse
Here is the link for the updater tool. I think it gets you to EB13 wiping your phone:
http://db.tt/LttNmT9
The other option is to flash the ReRFS EC05 ROM and stock recovery in Development. Here:
http://forum.xda-developers.com/showthread.php?t=1027904
kennyglass123 said:
Here is the link for the updater tool. I think it gets you to EB13 wiping your phone:
http://db.tt/LttNmT9
The other option is to flash the ReRFS EC05 ROM and stock recovery in Development. Here:
http://forum.xda-developers.com/showthread.php?t=1027904
Click to expand...
Click to collapse
Thank you very much man, I loved this phone yesterday, and really don't wanna hate it (not yet anyway)
kennyglass123 said:
Here is the link for the updater tool. I think it gets you to EB13 wiping your phone: http://db.tt/LttNmT9
Click to expand...
Click to collapse
Is there anything special I need to know about this? Or is it a simple plug in and run?
Zexter said:
Is there anything special I need to know about this? Or is it a simple plug in and run?
Click to expand...
Click to collapse
This is an Odin like interface that needs the computer and also asks for download mode but it detects the phone in most cases when Odin can't. Give it a try and if it still can't find your phone download mode is broken. Then go to plan B.
Downloading now! Will post the results. Thanks again for the hospitality.
[edit] That program didn't work either. It just stays at the "plug into computer" step
Gonna try plan B now
Zexter said:
Downloading now! Will post the results. Thanks again for the hospitality.
Click to expand...
Click to collapse
Hope it works for you. I downloaded it, never used it, kept it as a backup in case Odin failed one day, just installed it now so I can answer your question..lol.
i am trying to root my phone tonight while i still have use of this computer. I have downloaded chainfire with the odin and the tar file. I have also gotten into developer mode and checked usb dsebugging. the next step in the instructions I am reading (which is 2 by the way) but when I go into security I have no option to turn off reactivation lock. is there something I am missing. Thanks
bls2633 said:
i am trying to root my phone tonight while i still have use of this computer. I have downloaded chainfire with the odin and the tar file. I have also gotten into developer mode and checked usb dsebugging. the next step in the instructions I am reading (which is 2 by the way) but when I go into security I have no option to turn off reactivation lock. is there something I am missing. Thanks
Click to expand...
Click to collapse
If you have an SM-N900T, you don't have reactivation lock as far as I know. I couldnt find the option in mine, so I went ahead without it. I think its in the International version.
i have downloaded odin 3.7 and CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 file fofor rooting. the first time tt said pass but on my phonne on the top I had 3 messages in different colors saying something about warranty, and a couple other things. It had the not 3 logo on the phone but it never rebooted like its supposed to. I tried restarting it but it went back to the same thing. if some one who knows how to so this could you please lead me to the correct files i need to root this thing. I have never had so much problems rooting a phone in my life. I am still on version 4.3 and I would really appreciate some help. Thanks
re: re-flash
bls2633 said:
i have downloaded odin 3.7 and CF-Auto-Root-hltetmo-hltetmo-smn900t.tar.md5 file fofor rooting. the first time tt said pass but on my phonne on the top I had 3 messages in different colors saying something about warranty, and a couple other things. It had the not 3 logo on the phone but it never rebooted like its supposed to. I tried restarting it but it went back to the same thing. if some one who knows how to so this could you please lead me to the correct files i need to root this thing. I have never had so much problems rooting a phone in my life. I am still on version 4.3 and I would really appreciate some help. Thanks
Click to expand...
Click to collapse
Try Odin flashing the CF-AutoRoot TAR file again, it should work fine,
and welcome to the very exclusive KNOX club. LOL
After flashing with odin you need to flash custom recovery like twrp or cwm.
Good luck!
Misterjunky said:
Try Odin flashing the CF-AutoRoot TAR file again, it should work fine,
and welcome to the very exclusive KNOX club. LOL
After flashing with odin you need to flash custom recovery like twrp or cwm.
Good luck!
[/QU
now kies wont recognize my phone
Click to expand...
Click to collapse
bls2633 said:
now kies wont recognize my phone
Click to expand...
Click to collapse
Is it still not recognizing it? Do you have it in Odin(download) mode?
idtheftvictim said:
Is it still not recognizing it? Do you have it in Odin(download) mode?
Click to expand...
Click to collapse
it wont even let me get to that screen. it says something about there is some kind of problem. im going to try to hook up now so I can tell you what it says, ....please connect a device. well, it actually connected this time. it says i have the latest firmware but my phone says im on 4.3 IM not sure what to do
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
...
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
update!!
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
update
chatovishious said:
I second what spammy said.
I just spent 6 hours fixing my Sprint s6. I got it domestic unlocked and somehow near-bricked it, and then got the dreaded usb not recognized message. Shutting my laptop all the way down and letting it sit a few minutes did the trick and I was able to use Odin afterwards.
Click to expand...
Click to collapse
spammy l said:
Geez... that sucks, and disappointing no one has replied yet.
I hate to reply with a few of the obvious tricks- but it has happened multiple times to me that my phone won't be recognized by ODIN (or anything other than as "charging"). Usually this is solved by switching to other USB ports, and plugging-unplugging a few times, but when that fails (which it does not infrequently)- I have gotten lucky by not just restarting my computer, but actually turning it off, waiting a moment and turning it back on.
Magically sometimes that does it.
Hope that works for you, and that others more senior weigh in on this :good:
Click to expand...
Click to collapse
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Gladi80rPrincess09 said:
so, i got it to connect by just lifting the tongue a little. It connected to Odin. I tried to flash it using the TAR file but it keeps saying failed. Can anyone tell me why it says "custom binary blocked by frp lock" and how to fix that ? I know I have to connect it to samsung online or something but the phone is stuck in boot loop mode so I cant really do much. Like I said before I tried to flash with the 5.0.2 TAR file and ended up with the following message at the top left and corner in red and black highlight "SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1" what does this mean? is there a fix? and how do I fix it? my phone is already factory rest and I lost everything so I am not concerned about that as long as I can get it to turn back on. Please help me.
Click to expand...
Click to collapse
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
help me!
chatovishious said:
Where you previously on 5.1.1? If so I hear downgrading causes problems. Download a more recent tar.
Mine is 5.1.1 OL1 modem.
I'm betting that is your problem.
Click to expand...
Click to collapse
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Gladi80rPrincess09 said:
i can't remember if my phone is upgraded or not. i did it with 5.0.2 and ive been on the search for the 5.1.1 file. where can I find it?
Click to expand...
Click to collapse
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Thank you! progress/update
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Gladi80rPrincess09 said:
so, i downloaded the 5.1.1 Tar file progress is that I am going to flash it. I have been using the most updated version of Odin (3.10.7) could that be causing the issue? the phone stays connected while its flashing in Odin. Once it is connected I dont mess with it? Also, please answer me if I am able to fix this issue and will i be able to get my phone booted?
Click to expand...
Click to collapse
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
question
CCallahan said:
Sounds like your USB is a bit out of wack. You need to make sure that the PC you are using is finding the device properly, loading the drivers, and allowing you to access the internal storage. Just go to "My Computer" on your PC and your device should show up and allow you to access it. Otherwise trying to use Odin will be a waste of your time.
Once you have that Odin should find it no problem. However, if your microUSB on the device is acting intermittent and you start flashing in Odin and it disconnects for a sec there will be issues. You don't want an interrupt during the flash.
If you can do all this go to this link and download Odin 3.10.6 and the OJ7 tar file: http://forum.xda-developers.com/sprint-galaxy-s6/general/how-to-to-100-stock-root-t3075448
Don't use previous version of Odin as they are confirmed to have issues flashing some tar files on the S6. If it doesn't work try doing another factory reset through stock recovery and try again.
Report back your findings to continue troubleshooting if needed.
Click to expand...
Click to collapse
CCallahan said:
I have not used the 3.10.7 version yet but should not be a problem.
Download the tar file, connect the device and make sure Odin shows the device as connected/ready, hit the AP button and select your tar file, then flash and let finish. Then it will reboot automatically and boot up normally.
Try this and post your findings.
Click to expand...
Click to collapse
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Gladi80rPrincess09 said:
i knocked the phone off the computer desk and it disconnected from Odin while it was in progress and it said failed. The phone was in download mode and now it is stuck on a blue screen that has white triangle with exclamation point. it reads "an error has occurred while updating the device software. use the emrgency recovery function in the smart swtch pc software" what did I do?
Click to expand...
Click to collapse
Can you get the device back in download mode?
update!!
CCallahan said:
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
---------- Post added at 10:59 AM ---------- Previous post was at 10:54 AM ----------
Can you get the device back in download mode?
Sent from my SM-G920P using Tapatalk
Click to expand...
Click to collapse
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Gladi80rPrincess09 said:
yes, i got it back to download mode. i tried to reflash it with Odin and now it says failed. i can't turn it on or off. if i try to boot it off then it goes to that blue screen again i tried to do the smart switch thing but it doesnt recognize my device
Click to expand...
Click to collapse
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
thank you for the help!!
chatovishious said:
Dont worry about that. That's what happened to me, but that screen functions the same as Download mode. you can still flash tar files from there.
Here was the link to the tar files I used.
http://www.droidviews.com/install-latest-ol1-stock-firmware-on-sprint-galaxy-s6-and-s6-edge/
Click to expand...
Click to collapse
i got it to work!!!
Gladi80rPrincess09 said:
please help me!! clearly i am more of a noob than I thought I was!
I rooted my phone using Odin a few months ago. Then it just crapped out on me. Now it is stuck in a boot loop mode. I can get it to recovery mood and download mode. I have tried wiping the cache partition and done the factory rest. That isn't the issue. The issue is that when I have Odin open the phone isn't being recognized. it keeps saying "USB device not recognized. the last USB device you connected to this computer malfunctioned, and Windows does not recognize it". I have tried reinstalling the drivers for my Sprint S6. I have also updated the media package for my windows 8.1. But it still isn't recognizing the phone. I also tried un instaling and reinstalling. I have smart switch but still nothing. I am not entirely sure how to fix this. Please Help!! Also, in the top left hand corner where it says "kernal is not seandriod enforcing. custom binary blocked by frp lock"
I've exhausted everything best to my knowledge. I appreciate all the help I can get from you experts. Thank all in advance from this tech noob!
Click to expand...
Click to collapse
Hey! Still stuck?
Poebat said:
Hey! Still stuck?
Click to expand...
Click to collapse
No according to the post above yours.
koop1955 said:
No according to the post above yours.
Click to expand...
Click to collapse
K. Sometimes something appears to work and then fails :/ happens sometimes
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Gladi80rPrincess09 said:
Thank you all for the kelp! i finally got it to work. Never again will I root my phone. Now, the only sad thing about it is that I lost all my treasured memories ( pictures and videos)
Click to expand...
Click to collapse
nothing wrong with rooting if you know what you're doing. ?
Sent from my SM-G900P using Tapatalk