Hi All, Noob here.
Could some one help me with this issue i'm having.
I've flashed my Desire HD with UD 1.8V ROM. Everything is brilliant except the power widget to turn off wifi, 3g and other sorts seems to have gone missing suddenly. I have rebooted, turned off and on the settings in Settings > Ultimate Droid > Interface > Notification Power Widget but i'm having no luck.
Also, i forgot to flash the recommended radio whilst flasing UD ROM. Is it safe to flash the radio now or do i have to do a clean wipe and reflash the ROM.
Thanks in advance
tholbear said:
I've flashed my Desire HD with UD 1.8V ROM. Everything is brilliant except the power widget to turn off wifi, 3g and other sorts seems to have gone missing suddenly. I have rebooted, turned off and on the settings in Settings > Ultimate Droid > Interface > Notification Power Widget but i'm having no luck.
Click to expand...
Click to collapse
On Cyanogen there is a separate section to tick what settings appear in the notification bar. If this has the same, check to see they are ticked.
If no such setting then you may have to reflash the ROM. If you DON'T wipe anything all your settings, sms, apps etc should all be ok.
tholbear said:
Also, i forgot to flash the recommended radio whilst flasing UD ROM. Is it safe to flash the radio now or do i have to do a clean wipe and reflash the ROM.
Click to expand...
Click to collapse
It's safe to flash radio after ROM.
Mr_JMM said:
On Cyanogen there is a separate section to tick what settings appear in the notification bar. If this has the same, check to see they are ticked.
If no such setting then you may have to reflash the ROM. If you DON'T wipe anything all your settings, sms, apps etc should all be ok.
It's safe to flash radio after ROM.
Click to expand...
Click to collapse
Thanks for the quick reply. Ive ticked wifi, 3g and couple of other settings but still no joy. I'll reflash it and see how it goes.
Related
Just installed cm7 on my wildfire however GPS is not working. How do I get it working (and how do i get the HTC ime back)
Sent from my HTC Wildfire using XDA App
Reflash the radio. Radio can be found in the WildPuzzle thread (Or in my Index thread). Also, there's a thread in Dev having the HTC IME, which works on CM7. (No Enter key though)
Ok. Also how do I get the notification led working
Sent from my HTC Wildfire using XDA App
I don't know about 3rd party apps, but, Notification LED works fine for me. :/
Edit: the notifications was me being a idiot
brilldoctor said:
Just installed cm7 on my wildfire however GPS is not working. How do I get it working (and how do i get the HTC ime back)
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
Hi, today I did the same...and I've the same problem: GPS icon does not appear, i try to install Radio_13.55.55.24H_3.35.20.10 in recovery mode (recovery-clockwork-3.2.0.0), but it says "Amend scripting is no longer supported"
Where can I find a working package to fix GPS?
Thanks, kind regards.
cage81 said:
Hi, today I did the same...and I've the same problem: GPS icon does not appear, i try to install Radio_13.55.55.24H_3.35.20.10 in recovery mode (recovery-clockwork-3.2.0.0), but it says "Amend scripting is no longer supported"
Where can I find a working package to fix GPS?
Thanks, kind regards.
Click to expand...
Click to collapse
Install ROM Manager (Or, it is already installed by default). Open it, Select "Flash ClockWorkMod Recovery". It will install CWM v2.5.0.7 on the SD Card. (Technique called FakeFlash). Then, select Reboot into Recovery from within ROM Manager. This will take you to recovery 2.5 which will support flashing the Radio.
Hi I've the same problem. I have latest CM7 stable build. I installed the latest 2.5 clockworkmod, and flashed the latest radio package. Still no GPS on my Wildfire Any ideas anyone?
nickm321 said:
Hi I've the same problem. I have latest CM7 stable build. I installed the latest 2.5 clockworkmod, and flashed the latest radio package. Still no GPS on my Wildfire Any ideas anyone?
Click to expand...
Click to collapse
Flash the radio package which ends with 19.25. Also, in CM7, you do not get the GPS Icon on the status bar as soon as you turn it on. Only when you open an app that actually uses it, will you get the icon. (Apps like Google Maps, Navigation Apps etc)
3xeno said:
Also, in CM7, you do not get the GPS Icon on the status bar as soon as you turn it on. Only when you open an app that actually uses it, will you get the icon. (Apps like Google Maps, Navigation Apps etc)
Click to expand...
Click to collapse
yep, that also surprised me
Do you know if there is actually a connection when the image is not shown? (when GPS is not used). Or will the battery only drain if some program is using the GPS? Meaning it would be okay to just leave the GPS option on all the time
wolfway said:
yep, that also surprised me
Do you know if there is actually a connection when the image is not shown? (when GPS is not used). Or will the battery only drain if some program is using the GPS? Meaning it would be okay to just leave the GPS option on all the time
Click to expand...
Click to collapse
I think it will still drain your battery out, even if you don't use an app and keep GPS on. I was testing it, and didnt get a lock in my location, so, closed Google Maps and kept the device as it is. But, the battery log showed the whole time as "GPS on"
Thanks 3xeno. 19.25 version radio worked for me. Strange, as it wasn't the latest!
hye my gps still not working..
i have try these steps 1. Go back to your stock froyo ROM turn on GPS and then open Google Maps. Let the GPS find you, wait for a few mins and then go back to your intended ROM after clearing and formatting the data. Have tried this method on 3 cells ( My friends were the victims!!!) and it worked perfectly!!
but the gps still cannot capture mylocation...
so what to do??
should i try flash the radio but my baseband version is already 20.10..
ss_sk said:
hye my gps still not working..
i have try these steps 1. Go back to your stock froyo ROM turn on GPS and then open Google Maps. Let the GPS find you, wait for a few mins and then go back to your intended ROM after clearing and formatting the data. Have tried this method on 3 cells ( My friends were the victims!!!) and it worked perfectly!!
but the gps still cannot capture mylocation...
so what to do??
should i try flash the radio but my baseband version is already 20.10..
Click to expand...
Click to collapse
Reflash 20.10. Or, you can try 19.25 also. In some cases where GPS on 20.10 failed, it has been known to work with 19.25
yeah !! thanks...
flashing to 19.25 seems to solve the problem..
3xeno said:
Install ROM Manager (Or, it is already installed by default). Open it, Select "Flash ClockWorkMod Recovery". It will install CWM v2.5.0.7 on the SD Card. (Technique called FakeFlash). Then, select Reboot into Recovery from within ROM Manager. This will take you to recovery 2.5 which will support flashing the Radio.
Click to expand...
Click to collapse
It's working, well done, do you suggest to keep the CWM 2.5 or return to the 3.0
by
Changing my brightness in the settings doesn't do anything.
It seems like its stuck on auto brightness but its turned off?
I am on the latest jugg rom and kernel
you have to turn off auto, before you can change brightness
I know.
I unchecked it in settings than i start moving the slider for the brightness and nothing happens! I noticed this a few days back.
Are there any adb commands i can run thru shell for screen brightness?
check to see if you have enabled power saving mode
AllGamer said:
check to see if you have enabled power saving mode
Click to expand...
Click to collapse
its disabled
edit: just downloaded some app called screen brightness off the market, doesnt do a thing! i just hope its not a hardware thing.
It used to work just fine im not sure what happened. I read on beastmod thread that melvin included "auto brightness to save battery" but after a complete wipe and fresh install of a different rom wouldnt that go away?
if you're on Juggernaut 2.5 this is normal... update to Juggernaut 2.6
if you are on 2.6 did you wipe everything?
Yes running latest jugg gear. Full wiped & fixed permissions.
Anyone have any suggestions? I've never had this problem before and I've been an android user for 3 years.
This is very strange to me. I wonder if i should go back to stock to see if the issue still persist.
I had the problem for the first time on 2.5 no matter what kernel I used. The problem is gone now on 2.6 with it's stock kernel.
life02 said:
I had the problem for the first time on 2.5 no matter what kernel I used. The problem is gone now on 2.6 with it's stock kernel.
Click to expand...
Click to collapse
interesting.. i might try and flash the stock kernel to see if it fixes the issue.
Hi all,
every time when I start or restart (normal or hot) my DHD the sound profile will be set to 'normal' independent from the selected sound profile before. I select the 'just vibrate' sound profile, shut down and restart or just restart my DHD again. At the beginning the previous selected sound profile is active but suddenly it changes to 'normal' again.
The day before yesterday I have flashed LeeDroid 5.1.1. Thus I assume the issue has to do with LeeDroid (not sure if this is really the case). I was not able to find anything in the settings and don't have an app installed which could do that. Furthermore I was not able to find anything regarding this topic via Google or forum searches.
Maybe some of you have or had the same issue and know how to fix it?
Many thanks in advance.
lelli1906 said:
Hi all,
every time when I start or restart (normal or hot) my DHD the sound profile will be set to 'normal' independent from the selected sound profile before. I select the 'just vibrate' sound profile, shut down and restart or just restart my DHD again. At the beginning the previous selected sound profile is active but suddenly it changes to 'normal' again.
The day before yesterday I have flashed LeeDroid 5.1.1. Thus I assume the issue has to do with LeeDroid (not sure if this is really the case). I was not able to find anything in the settings and don't have an app installed which could do that. Furthermore I was not able to find anything regarding this topic via Google or forum searches.
Maybe some of you have or had the same issue and know how to fix it?
Many thanks in advance.
Click to expand...
Click to collapse
Did you clear cache and dalvik cache before flashing? and did you fully wipe data?
It shouldn't be happening because the rom i'm on (sense 3.5), it doesn't give that sort of issue and i don't think leedroid should give you any issue like that since it is one of those old roms which are bug free...try what i told you to do and if it still gives you problem then your best bet is to flash a new rom...
Thanks for your reply.
I have flashed LeeDroid 5.1.0 via Rom Manager and selected the options for clearing cache and dalvik cache. After that I flashed the 5.1.1 patch to solve the 'no signal' issue (without wiping again). Which data do I have to wipe fully? I have also tried to use the wipe/factory reset functionality in the recovery mode but without flashing the ROM again (I have restored the created backup of LeeDroid - maybe that's what I shouldn't do?).
I'll give it another try with full data wipe before.
Hi everyone!
I have problem with JellyTime on HTC DHD.
First I install JellyTime 4.2.2R7 into phone. The bluetooth not working.
After then I re-install JellyTime 4.2.2R9. The bluetooth ok, but gallery can't play video. Error text "Can't play this video"
--> Finally I re-install JellyTime 4.2.2R8. But the same, can't play video (open a video, waiting a long time and it still not working)
I also wiped cache and data and flash again.
Can everyone show me resolve this problem. Thanks so much!
Alo, anyone know this problem.
banghn said:
Alo, anyone know this problem.
Click to expand...
Click to collapse
Hi,
I installed JellyTime 4.2.2 R8 a few days ago and never tried to play a video file on it before seeing your message.
I just put an .mp4 (720p) on my DHD and opened it with the integrated Google video player. Everything seems to be fine for me on that point. I can go forward and backward without any lag.
I tested also 3gp files, recorded with the camera and it works fine as well.
If you do it another way, could you give more details about how you proceed? I'm interested in checking if it works. And it can be handy for people to help you find a solution.
By the way, do you have any issue with GPS on JellyTime R8? In any case, could you indicate which radio version you have and if your DHD is S-ON or S-OFF?
GPS is not working on mine (no notification-bar icon, no fix), my phone is S-ON and radio version is 12.65.60.29U_26.14.04.28_M.
Matth59 said:
Hi,
By the way, do you have any issue with GPS on JellyTime R8? In any case, could you indicate which radio version you have and if your DHD is S-ON or S-OFF?
GPS is not working on mine (no notification-bar icon, no fix), my phone is S-ON and radio version is 12.65.60.29U_26.14.04.28_M.
Click to expand...
Click to collapse
Hi, I have your same configuration and same problem. I solved by installing an ICS ROM, but i'll be happy to go back to JB if there were a way to fix it...
Icifide said:
Hi, I have your same configuration and same problem. I solved by installing an ICS ROM, but i'll be happy to go back to JB if there were a way to fix it...
Click to expand...
Click to collapse
Apparently, flashing the radio ROM can fix it. But need to be S-OFF and it is more risky than just flashing the OS.
The ICS ROM you talk about has Sense, right?
Matth59 said:
Apparently, flashing the radio ROM can fix it. But need to be S-OFF and it is more risky than just flashing the OS.
The ICS ROM you talk about has Sense, right?
Click to expand...
Click to collapse
yes it does...i read about flashing a new radio too..but yes basically it must be s-off.
I'm still researching. I'll tell you if i have any news.
Ok I solved doing this:
- Install this ROM (full wipe first) from herehttp://forum.xda-developers.com/showthread.php?t=1382235&highlight=zip full stock version.
- Then check that the gps works with gps status
- Go in recovery, do a wipe data/ factory reset
- INstall the JB R9 + gapps
Hope you can fix.
Icifide said:
Ok I solved doing this:
- Install this ROM (full wipe first) from herehttp://forum.xda-developers.com/showthread.php?t=1382235&highlight=zip full stock version.
- Then check that the gps works with gps status
- Go in recovery, do a wipe data/ factory reset
- INstall the JB R9 + gapps
Hope you can fix.
Click to expand...
Click to collapse
It really works? Amazing !
I saw a few posts talking about that procedure, but it looks so weird that I couldn't believe it! xD
I will try this week-end and let you know.
EDIT: And by the way, you still have the same radio ROM? It just flashes JB to Sense, activate the GPS from Sense and flash JB back?
Matth59 said:
EDIT: And by the way, you still have the same radio ROM? It just flashes JB to Sense, activate the GPS from Sense and flash JB back?
Click to expand...
Click to collapse
Yes same radio of course! And Yes just follow the procedure! I have to admit it works but i have no idea why...
UNBELIEVABLE !! It Works
Icifide said:
Ok I solved doing this:
- Install this ROM (full wipe first) from herehttp://forum.xda-developers.com/showthread.php?t=1382235&highlight=zip full stock version.
- Then check that the gps works with gps status
- Go in recovery, do a wipe data/ factory reset
- INstall the JB R9 + gapps
Hope you can fix.
Click to expand...
Click to collapse
Amazing !!
It fixed my GPS issue as well! But how it solved it is still a mystery.
I did it almost the same way as you did. I explain it behind in case it can be usefull for somebody else experiencing GPS issues:
Reminder: being S-ON, do not forget to flash boot.img from the ROM image using fastboot.exe !
- back up of JellyTime R8
- from Recovery:
-------->full wipe (data/factory resest + cache + dalvik)
-------->restore back up of my previous Sense ROM (the one that has been installed after using HTCDev-like tools to root/unlock/S-ON the phone)
- reboot on the Sense Rom and activate GPS and check status using GPS Status & Toolbox (can take several minutes before getting a fix signal)
- reboot in recovery:
-------->full wipe again
-------->restore backup of JellyTime R8
- reboot and finally activate GPS using the icon bar or going in parameters (the GPS icon should start blinking) and check the fix using again GPS Status & Toolbox (or whatever).
Thank you again Icifide ! :laugh:
Everything is working absolutely awesum....
Its fast but its draining the battery at a very high rate......is there a anyone who can solve this problem
Sent from my Desire HD using xda app-developers app
Hi everyone,
since I updated to 2.10 software version, I have a recurring bug...
When I activate power saving mode, every time when I turn screen on the GPS icon appears and seems to be trying to locate the phone, although I have GPS deactivated and location settings set to power saving at all times.
I've tried it with many custom ROMs, stock and elementalx kernel, but it's still there. Is this a bug from HTC ? Haven't found anything regarding this on the forum.
thanks!
nuts77 said:
Hi everyone,
since I updated to 2.10 software version, I have a recurring bug...
When I activate power saving mode, every time when I turn screen on the GPS icon appears and seems to be trying to locate the phone, although I have GPS deactivated and location settings set to power saving at all times.
I've tried it with many custom ROMs, stock and elementalx kernel, but it's still there. Is this a bug from HTC ? Haven't found anything regarding this on the forum.
thanks!
Click to expand...
Click to collapse
I have no problems. You problem seems to be because of some app you have installed. Did you try to check after a full wipe without any apps installed or without restoring any backups?
thanks for your answer. Nope, haven't tested after a factory reset but I will try if I can't find any explaination... TBH, I thought as long as GPS is off (when location settings are set to battery saving) no app was allowed to use it. So if one of them does it anyway, I have to find out which one! Is it more likely to be an app with root access ?