Develop Bugs

[Q] how to remove amonra recovery

So I don't want to unroot. I have amonra, clockwork, and rom manager. When I boot into recovery it goes straight to ra recovery, I have to flash the update.zip to get to clockwork. I would just like it to boot straight to clockwork or to remove ra
I installed rom manager the other day and updated to the latest version thinking that would overide ra when booting to recovery from rom manager, only for ra to come up saying 'bad' update.
I know this will more than likely be simple, I have done a few searches but not found much apart from unrooting.

stevoh84 said:
So I don't want to unroot. I have amonra, clockwork, and rom manager. When I boot into recovery it goes straight to ra recovery, I have to flash the update.zip to get to clockwork. I would just like it to boot straight to clockwork or to remove ra
I installed rom manager the other day and updated to the latest version thinking that would overide ra when booting to recovery from rom manager, only for ra to come up saying 'bad' update.
I know this will more than likely be simple, I have done a few searches but not found much apart from unrooting.
Click to expand...
Click to collapse
you need to re run unrevoked and untick use custom recovery so it flashes clockwork or use custom and select a clockwork recovery of choice
its in the clockworkmod thread in the dev section and the amonRA thread
please read them

Hello!
You need to unrevoked again....Downolad unrevoked for your phone, BEFORE to plug your phone to your computer go in the up left corner and choose your recovery , wich can be amonra or clockwork mod, let computer do the job and voila! You are donne

Thanks you very much dudes. I was a total noob to all things root when I did mine and just followed steps from a mate. I couldn't remember how RA got on there. Cheers
Sent from my HTC Desire using XDA App

Hey, so I hope you guys check this. I tried running the unrevoked again.
Only for it to seemingly get right to the end and attempt root (I thought it was just going to reflash and slap the clockwork in there) for it to say Error: failed to get root - Is your firmware too new?
Is there an easy way around this? Or is it the rom I am running??
I haveOxygen-20. RC6

stevoh84 said:
So I don't want to unroot. I have amonra, clockwork, and rom manager. When I boot into recovery it goes straight to ra recovery, I have to flash the update.zip to get to clockwork. I would just like it to boot straight to clockwork or to remove ra
I installed rom manager the other day and updated to the latest version thinking that would overide ra when booting to recovery from rom manager, only for ra to come up saying 'bad' update.
I know this will more than likely be simple, I have done a few searches but not found much apart from unrooting.
Click to expand...
Click to collapse
how did u do that ?!?! i have ra recovery but dont want it beacuse strangely i cant and am unable to flash an roms by it !! i dunno wat d fault is but im doing evrythn correctly.. plz help me ! can i have two recoverys like u ? and how !? btw i have lg p500... plz help ! i want some other recovery so that i can flash roms from it... for some reasons im not being able to flash roms from ra recomery aka "amon_ra_recovery_installer".. any help will be appreciated !!

You don't get 2 recoveries. If you 'fake flash' using ROM Manager it'll lose CWM instead of your normal recovery

You could try to S-OFF with AlphaRev iso (which will also update the recovery to CWM-AlphaRev 2.5.1.8 with dark blue color)
When you are S-OFF you can update the recovery with fastboot
If you don't want or cannot do all this, you could try to fake flash the CMW 3.2 recovery when you need it.
Fake flash means to load another recovery (3.2) while in recovery (2.5) by simply applying a zip file. You then have all the feature of the 3.2 recovery without permanently installing it.
1) put the zip with 3.2 recovery on your SD card (zip in thread: http://forum.xda-developers.com/show....php?t=1039954)
2) boot in recovery
3) apply the zip (like you would flash a rom, but it only loads the 3.2 recovery operating system without removing/deleting any file in your phone). You should notice the text color change and a few more options in the menu.
4) enjoy
Fake Flash is more or less what what Rom Manager is doing when you use it to reboot in recovery mode (but it only supports a restricted set of recovery versions that have been tuned to work with Rom Manager).
Another benefit of fake flash is that you can still use your old nandroid backups, as it it not recommended to restore with recovery X a backup made with recovery Y.

[Q] Flashing radios in Clockwork 3.0.0.5?

So I'm trying to flash some new radios on my Evo. And when I try to just do it by pressing "install a .zip from the SD card" it doesn't seem to work. Is this a known issue with Clockword 3.0.0.5 at all?

Yes, the updater-script tells the update-binary to basically package the zip within the zip (recursion!) to be flashed by the hboot, then reboot into hboot and have it automatically flash the new zip.
Unfortunately... ClockworkMod 3 doesn't play well with this. In the meantime, just flash Amon_RA 2.3 and flash the zip manually. I added warnings yesterday in ROM Manager about this. I'm working with gu1dry to try and find a way to get the update-binary to flash the radio(s) directly from within the recovery.

Thanks a lot, I'll be sure to do that.
drmacinyasha said:
Yes, the updater-script tells the update-binary to basically package the zip within the zip (recursion!) to be flashed by the hboot, then reboot into hboot and have it automatically flash the new zip.
Unfortunately... ClockworkMod 3 doesn't play well with this. In the meantime, just flash Amon_RA 2.3 and flash the zip manually. I added warnings yesterday in ROM Manager about this. I'm working with gu1dry to try and find a way to get the update-binary to flash the radio(s) directly from within the recovery.
Click to expand...
Click to collapse

CWM 2.5 Image or Stock ROM for CWM 3.2

Im stuck with a Desire with CWM 3.2 on it, and a stock ROM which I can't flash because of the install scripts thingie.
Where is the CWM 2.5 image?
I tried this link: http://koush.tandtgaming.com/recoveries/recovery-clockwork-2.5.0.1-bravo.img but it is broken.
Or, where can I find a rooted stock rom (no a2sd or flashy things) to install with CWM 3.2?
Thanks!
btw, desire is wiped, so I cant boot into system and run unrevoked again.

Have u tried this?
http://forum.xda-developers.com/showthread.php?t=773997

Same error when flashing about Amend Scripting not supported on CWM 3.2.
I dont get. No CWM 2.5 image anywhere on the net? I can "fastboot flash recovery" in 2 sec and solve the problem (
UPDATE: Nevermind, apparently files were copied, and I managed to run alpharev's iso and get cwm 2.5
CASE CLOSED

How about AmonRa 2.0.1?

[Q] Installation aborted clockworkmod v3.0.0.8

I have a rooted droid incredible that was running stock froyo. I was attempting to install gingerbread on clockworkmod recovery 3.0.0.8 and it did install, but after it installed it wouldn't ever get past the first white screen. I think the rom that I installed was TMartinPPC_GingerInc_v1.0. I then went back and tried to reinstall the signed froyo rom that I had before, but everytime I try I get a message that says:
It was necessary to remove it when upgrading to the clockworkmod 3.0 gingerbread based recovery. Please switch to edify scripting (updater script and update-binary ) to create working update zip packages.
Installation aborted.
I've looked many places for a solution to this but most solutions involve actually being able to boot the device. Most posts I've seen say that it is an issue with clockworkmod 3.0.0.8 and that I need to revert to 2.X.X.X but I'm not sure if I can do that without being able to boot my device.
Any help would be greatly appreciated.

[Q] Stock kernel for HTC Wildfire

Does anyone know where to get a stock Kernel (Froyo) for HTC Wildfire, it needs to be in edify scripting, othervise i can't install it

See my sign for the link to "complete wildfire index". You can find stock kernel there. But maybe it is in amend scripting (not sure).
But you can use rom manager to flash 2.x recovery and then reboot to recovery from rom manager itself. Then you will get 2.x recovery which can install files with amend scripting.
If you don't want to do all these, then you need "amend to edify " converting tool. It is present somewhere in these forums. You will get it by searching.
Sent from my HTC Wildfire using XDA App

Yes, Stock kernel files are in Amend. But, you shouldn't have issues flashing them with Clockworkmod 2.x using ROM Manager.

Thank you but i already knew about installing from rom manager . The problem was that i couldn't boot up and i had cwm rec 3.0.0.6. so i couldn't install the stock kernel but solved that problem by flashing cwm rec 2.5.0.7. trough fastboot and then installing the stock kernel
Anyway thanks for trying to help!