hi,
i've been trying to update my radio.
a while ago i flash back to a stock orange rom so i could do s-off which seemed to go ok.
since then i have tried various ways (AMT 1.1 & 1.2 and Android control) to upgrade from radio from 12.28b.60.140eU_26.03.02.26_M to 12.35d.60.140f_26.06.03.24_M2 as recommended by mike for his Android revolution ROM.
everytime i do it, the phone boots into fastboot and appears to load the new radio, the phone re-boots and everything tells me its been done successfully, but when i check the version reported in settings hasnt changed.
i checked by going into fastboot myself and it reports "ACE PVT SHIP S-OFF " which should confirm that the s-off has worked and i can flash a new radio.
can anyone confirm that i've done it right, or am i missing something obvious?
many thanks
To flash radios via fastboot you need ENG S-OFF.
You also should have Radio S-OFF.
Check these threads ENG S-OFF & Radio S-OFF
ahh, sorted now
many thanks
You need ENG S-OFF in order to flash your radio. Just use the search form and you will find a 1-Click-Tool in the forums.
I did that yesterday and all worked fine
All right. U need Eng OFF and S OFF.
I did it with Easy S-Off software and flashed radio with QFP.
Related
Hello
I have currently sorted out my DHD so its Rooted And Radio S-Off so I have no problems flashing custom roms but whats throwing me a little is the need for Eng S-Off so I can flash a newer radio. Im just wondering the simplest way to achieve Eng S-Off plus also I take it there is no problems in doing Eng S-Off whilst the phone is Radio S-Off.
I have trawled through the forum but cant seem to come to any conclusion so any help would be appreciated.
Thnaks
Hello.
You can use this tool to achieve ENG S-OFF.
It is safe to apply if you already have Radio S-OFF, tried out myself.
Hello
Thanks for that Nadeo worked a treat. Much appreciated.
Ta
Ace put eng s-off
Hi,
I would to ask if do I still need to install RADIO S-OFF even I do have ACE PUT ENG S-OFF? and is there any issue when I installed RADIO S-OFF with existing ENG S-OFF?
If you want to flash radios, it is highly recommended to have radio s-off. Otherwise it is not necessary. You can safely apply radio s-off on top of eng s-off. Just remember that you have to have the radio from 1.32 (or lower than 1.7x RUU), and preferably 1.32.405.6 ROM. You can flash raidroid stockify ROM if you are using some custom ROM right now.
I have to be honest, I followed a fairly technical guide to root my DHD and although I got the gist of it, I'm not sure if it left me with just ENG S-Off or Radio S-Off as well.
Is there a way to check for both?
Cheers.
You can check in bootloader it will say if you are eng off or not and if your cid is 1111111111 your radio s off too
Sent from my Desire HD using XDA App
- hold power button and select reboot then ok
- after hitting ok, wait 1 sec then press and hold power + vol down
- the phone will enter bootloader mode
at the very 1st line it should say ENG S-OFF
for RADIO S-OFF
- press vol down until you get more info
- if you see CID11111 that means you have RADIO S-OFF
else you don't
Excellent, thanks very much to both of you..........
Mine says
ACE PVT SHIP S-OFF
HBOOT.0.85.0007
....
...
...
...
..
What does that mean?
What s-off do I have?
Defectus said:
Mine says
ACE PVT SHIP S-OFF
HBOOT.0.85.0007
....
...
...
...
..
What does that mean?
What s-off do I have?
Click to expand...
Click to collapse
That is only radio s-off.i believe
Sent from my Desire HD using XDA App
Defectus said:
Mine says
ACE PVT SHIP S-OFF
HBOOT.0.85.0007
....
...
...
...
..
What does that mean?
What s-off do I have?
Click to expand...
Click to collapse
Indeed that is radio s-off.
Hboot s-off looks like "ACE PVT ENG S-OFF"
The ENG stands for engineering.
Thanks guys. It's a bit confusing.
I'm gonna flash a new radio today. Do I only need radio s-off or do i need eng -s-off too?
If so, i guess you can apply it after you've radio s-off'ed?
Edit: So now I used the s-off easy one click tool.
Now I have ACE PVT ENG S-OFF
Do I still have the radio s-off?
As joliko stated you can have both. How does that work anyway?
Once you've entered the bootloader (Volume down + power on) if it says eng s-off you obviously have eng s-off you then select system info or something like that and it says the CID:xxxx. For example my phone which is now radio locked due to loading LeeDroid 1.3 based on the latest 1.72.405.3 ROM and not realising I needed to run Radio s-off says CID-VODAP021. What you want is CID:1111111 (not sure how many 1's but you get the idea). My advice after reading many pages it make absolutely sure you have radio s-off before running any updates or flashing any ROMs period. It is also highly reccomended to have eng s-off and also super user access (root access). From what I have read Radio s-off is a higher or more superior access to eng s-off. Having Radio s-off (otherwise known as Super CID) enables you to unlock any simlock and also load the latest HTC 1.72.405.3 ROM without loosing any root access or s-off.
Yoshi_523 said:
Once you've entered the bootloader (Volume down + power on) if it says eng s-off you obviously have eng s-off you then select system info or something like that and it says the CID:xxxx. For example my phone which is now radio locked due to loading LeeDroid 1.3 based on the latest 1.72.405.3 ROM and not realising I needed to run Radio s-off says CID-VODAP021. What you want is CID:1111111 (not sure how many 1's but you get the idea). My advice after reading many pages it make absolutely sure you have radio s-off before running any updates or flashing any ROMs period. It is also highly reccomended to have eng s-off and also super user access (root access). From what I have read Radio s-off is a higher or more superior access to eng s-off. Having Radio s-off (otherwise known as Super CID) enables you to unlock any simlock and also load the latest HTC 1.72.405.3 ROM without loosing any root access or s-off.
Click to expand...
Click to collapse
actually you have more options with eng-s off as you can use fastboot commands. were if you just only had radio-s off you can't use fastboot but your right in the fact that you won't lose s-off were eng s-off is just the hboot been patched an so flashing new firmware with upgraded hboot you will lose the sercurity been off.
how do i know if I am ENG or Radio S-OFF
BOOTLOADER says:
VIVO PVT SHIP S-OFF RL
HBOOT-1.09.0000
RADIO - 3805.04.03.22_M
eMMC-boot
what does that mean?
I am planning to change my radio to be compatible with ARHD 1.1.2
radio s-off but no eng hboot
Sent out of my Free Candy Van.
Before, after I had used Easy Eng S-Off Tool, I had Ship S-Off. After that I found out I can't flash splash img using fast boot, I ran the tool again and I had now Eng S-Off.
But in the system info, the CID is not 111111.
Does that means I had lost my Radio S-Off?
I'm now on CyanogenMod7 RC-1 with Eng S-Off.
I just now tried this One click Radio S-OFF (windows recognized well my DHD in Device Manager), but it said "Unknown Error, probably connections" (usb cable works fine).
Edit: I restored the backed-up rooted 1.32 and do Radio S-Off. Things ran smooth. Now I have both Eng S-Off and CID 11111.
And by doing so I realized how big Sense Roms are. Clean backed-up rooted Sense 1.32 = 525MB. TB Fusion 3d (Sense 2.1 + 3.0) with some apps (not big): 765 MB. Clean MIUI 1.7.5 = 232 MB. CM7 RC1 with many apps = 457 MB.
I have tried to flash kkernel v6, v11 and OCbuzz.
But every time when I go to about phone in settings it says the default firmware.
when I am in the bootloader it says
"ACE PVT SHIP S-OFF
H-BOOT-0.85.02.08_M
MICROP-0438
RADIO-26.03.02.08_M
eMMC-boot"
It also says the time but I didn't think I'd need to say that.
I've only had the phone since christmas, so i'm still a noob, but I have no idea how to make it work. I borrowed a friends laptop to use the kernel update utility tool version 0.8
I am using the leedroid HD v1.3a rom.
someone please help me.
You need ENG S-OFF for the Kernel Update Utility to work, as it says in the requirements.
With ship S-OFF you can only flash via ClockworkMod, so you have two options: use CWM, or get yourself ENG S-OFF.
Kernel update don't show in the bootloader. What you are looking at is the radio version.
You need to boot the phone and then go settings>about phone>software and it will show which kernel you are running there.
Sent from my CyanogenMod Desire HD
jkoljo said:
You need ENG S-OFF for the Kernel Update Utility to work, as it says in the requirements.
Click to expand...
Click to collapse
Why is that different?
ENG S-OFF comes with engineering bootloader, which allows to issue fastboot commands to the bootloader through USB.
Oh, thanks
I didn't know FASTBOOT USB was only available from the ENG HBOOT .
Well actually it is available in SHIP hboot, too, but it just does not allow the user to do much
jkoljo said:
You need ENG S-OFF for the Kernel Update Utility to work, as it says in the requirements.
With ship S-OFF you can only flash via ClockworkMod, so you have two options: use CWM, or get yourself ENG S-OFF.
Click to expand...
Click to collapse
I used CWM and failed.
timstanley1985 said:
Kernel update don't show in the bootloader. What you are looking at is the radio version.
You need to boot the phone and then go settings>about phone>software and it will show which kernel you are running there.
Sent from my CyanogenMod Desire HD
Click to expand...
Click to collapse
I know it doesn't. I was only saying those things because I wasn't sure if all the pre-requisites were correct.
jkoljo said:
ENG S-OFF comes with engineering bootloader, which allows to issue fastboot commands to the bootloader through USB.
Click to expand...
Click to collapse
Can you link me to a guide to do this, i have a mac is that going to be a problem ?
P1xelVandal said:
I have tried to flash kkernel v6, v11 and OCbuzz.
But every time when I go to about phone in settings it says the default firmware.
when I am in the bootloader it says
"ACE PVT SHIP S-OFF
H-BOOT-0.85.02.08_M
MICROP-0438
RADIO-26.03.02.08_M
eMMC-boot"
It also says the time but I didn't think I'd need to say that.
I've only had the phone since christmas, so i'm still a noob, but I have no idea how to make it work. I borrowed a friends laptop to use the kernel update utility tool version 0.8
I am using the leedroid HD v1.3a rom.
someone please help me.
Click to expand...
Click to collapse
Here is my advice you have stated at bottom of your post your running leedroid 1.3a don't waste your time trying to flash the kernel as leedroid is built on 1.72 and you will be back on here ask long why your mic doesn't work or something else as there is no kernel compatible with the 1.72 as of yet HTC have not released it so your better of just getting Eng s-off and flashing the recommended radio from leedroids first post till a compatible kernel is available
From England with leedroid dhd techo!
leith51 said:
Here is my advice you have stated at bottom of your post your running leedroid 1.3a don't waste your time trying to flash the kernel as leedroid is built on 1.72 and you will be back on here ask long why your mic doesn't work or something else as there is no kernel compatible with the 1.72 as of yet HTC have not released it so your better of just getting Eng s-off and flashing the recommended radio from leedroids first post till a compatible kernel is available
From England with leedroid dhd techo!
Click to expand...
Click to collapse
Haha, after I read your post I checked and my mic only works when I am taking a video. :s XD
I took a backup of my phone when it was stock if I restore that will my phone go back to how it was ? I used rom maneger.
Hello everyone, I just got my DHD 2 days ago, and I already want to flash a new ROM on it (Revolution). I have rooted my phone via the wiki article, using gfree_02.
However, I am not sure about ENG S-OFF. I have rooted my phone using "./gfree -f", which means superCID, simlock off, RADIO S-OFF.
So I am guessing I only achieved RADIO S-OFF (besides permaroot, superCID and simlock). But prior to rooting the gfree way, I've noticed in the wiki that it suggested Visionary to be uninstalled. I've never installed it so it was no problem.
But now, in order to flash mike's Revolution, I need to have ENG S-OFF aswell (for flashing a better radio). I do not know if I achieved ENG S-OFF using only the gfree method (did I?). The only method I've seen is via ONE CLICK ENG S-OFF, via Visionary. I'd like to know a few things before I proceed.
Does installing Visionary on the phone, and turning ENG S-OFF via that method, cause any conflicts with gfree's permaroot? (seeing as the wiki suggest to not have Visionary installed) Does it have anything to do with the method I've used to permaroot?
And also, I would like to know what ENGINEERING HBOOT does, is it a second method to achieve ENG S-OFF? and if it's recommended over the Visionary way, considering I've achieved permaroot and RADIO S-OFF via gfree.
In case it is needed, my Build number is
Code:
1.32.405.6 CL278359
and Radio version is
Code:
12.28b.60.140eU_26.03.02.26_M
Thanks in advance!
boot into bootloader, (turn your device off, when off hold the volume down key and press power) at the top of the hboot screen it will either say "ACE PVT SHIP S-OFF" that is radio s-off. if it says "ACE PVT ENG S-OFF" thats eng s-off, if you only have radio s-off, you need to install an older 1.32 based htc rom with a stock kernel before you can use the eng s-off tool
Thanks for the reply!
Yep, it appears it is saying "ACE PVT SHIP S-OFF". But why do I need to install an older 1.32 ROM, I haven't seen that mentioned anywhere (except if the ROM is 1.7x)
Here's a quote from the One Click ENG S-OFF thread
jkoljo said:
It is best to use STOCK ROM (lower than 1.7x)!
Click to expand...
Click to collapse
So I should qualify for using the tool, right? If not, could you tell me from where have you read that you must install an older 1.32 (I already have 1.32.405.6)
Yes, your build is compatible
Great, thanks for the replies!
I have ENG S-OFF, and will proceed to flash a new radio. Just to be on the safe side, should I do a backup via CWM? Does CWM also backup radios?
The backup does not include a radio, so it does not matter whether you do it or not. You can find all the radios here in XDA, so it is not a problem.
you can flash any radio you want.
you can find the recommended radio for Revolution Rom, in the Revolution post.
I'm using Android Revolution 2.0.11 with kkernel_v19cfs kernel (you can find it here http://forum.xda-developers.com/showthread.php?t=836259).
radio 12.35d.60.140f_26.06.03.24_M2
benchmark 2835
have a nice DHD flight
Hi everyone,
I'm using leedroid rom and it's very nice of him to produce such an excellent rom.
After flashing rom, I continued to flash "radio 12.54.60.25_26.09.04.11_M2" as he recommended.
I just wondered how to flash this radio version.
Please help!
Head to my site, into Radios, then Radio Flasher Packaged. You will see that radio version.
Download that, unzip & run. It will guide you through the whole process.
I would like to say thank you to what you have provided.
I followed your steps then checked my radio version on Bootloader screen. The results are as follow:
"ACE PVT SHIP S-OFF
HBOOT - 0.85.0007
........
RADIO-26.03.02.26_M"
That means Radio version is still the same.
someone says that I have to do the two work simultaneously: eng S-Off and Ship S-Off.
What exactly do I have to do?
Search for 'one click eng s-off' and use the tool
Once thats done you'll be able to flash a new radio via fastboot
Also, don't post your question twice.
Use the search function too. If you did, you'd know you had to have S-OFF.
Closed.