Related
Guessing this thread goes here if not im sorry.
I am trying to root my hero and found a guide that i should use "flashrec" to first backup and the install/flash "recovery-RA-hero-v1.5.2" but when i try to back up i first got the error "Could not run command" tried again and got "image is invalid" and had hat error the last 20:ish times
But now when i try again i get the first error again.
And i have tried to restart phone an factory reset it and emptied the sd and so on but could not get it to work.
So i figure that i have to change tactic so i found another guide
http://forum.xda-developers.com/showpost.php?p=4257045&postcount=38
And it that guide they wanted me to use fastboot instead and i got as far as i should check if fast boot find my phone and it did without problem with (fastboot devices).
And the link in the guide to download recovery was broken so i figured i can use "recovery-RA-hero-v1.5.2" so i ran the command "fastboot boot recovery-RA-hero-v1.5.2.img" and only got "could not load file" or something like that.
And of some strange reason now when i try boot my .img i get "downloading 'boot.img'... FAILED (remote: not allow)"
So now after all this im starting to wonder if there is any safe way left to root the phone at all.
My phone is htc hero from swe updated with original "2.73.405.5" from htc and have never been rooted before.
Now i have even tryed the downgrade wethod with goldcard without result.
Same error both in flashrec and fastboot
Update to 2.73.405.5 via the WWE update from HTC's website and use this Flashrec 1.1.3 which works on that version
That was the one I had from the bigining but I can try again do I need goldcard then I have some other 2.73 now that I used goldcard to install or can I just flash with original.
Checked the rom im using now and it has the same checksum as the one on htc:s website "_HTC Hero_RUU_Hero_HTC_WWE_2.73.405.5_WWE_release_signed_NoDriver.exe"
So i have the latest from the htc site.
And flashrec dont work i get the "could not run command" some times and "image is invalid" some times and i have tryed the version of flashrec you recomended.
I have tried now and reinstall with "RUU_Hero_HTC_WWE_1.76.405.1_R3_WWE_release_signed_NoDriver" and gold card cus i cant use the flashrec on my phone.
but then i get "checking main version : update faild" should:nt that work on goldcard?
It sounds like you didn't make the goldcard correctly. When a goldcard is in the phone, it is the 'Super CID', which should get rid of the Checking Main Version : Update Failed error message associated with downgrading.
I can only suggest you try again using a different microSD card, preferably the stock one that came with the phone, and follow the instructions exactly, making sure you reverse the digits correctly (if you do it manually). If you're not sure, use QMAT as mentioned in the guide.
Once the goldcard works, you should be able to downgrade no problem.
HTH
I have the stock card and did exactly as the guide with the qmat so it should be right.
And copied over rows in the sdcard as an removeble device witg write rights and the card works in computer as one guide said i should test.
Could u help me if i send u my id so i know the goldcars should be ok?
What is the best way of formatting the card before doing gold card is it format in htc or sd formatter?
in this guide http://forum.xda-developers.com/showthread.php?t=573866 it says i should downgrade to 2.73.405.5
"20. Use the Official HTC RUU to downgrade to 2.73.405.5 here ftp://..."
And i am already on that rom as original from htc when i upgraded this summer/fall.
I'm stuck at a nearly 99% brick I think...
I've got an AMOLED Desire from T-Mobile Germany (still branded), with HBOOT 0.80.0000, rooted via Unrevoked and still S-ON.
The phone gets stuck during the boot process when the provider-splashscreen (or HTC-Logo) is shown at the beginning. Only pulling out the battery will shut the phone down.
The same happens when I try to get into Recovery via HBOOT. The only option is to pull the battery.
If I connect the phone via USB and enter Fastboot it is recognized by the computer with the command "fastboot devices".
I can't use ADB, because I can't access the recovery.
I downloaded the right RUU for my provider/amoled/hboot 0.80.0000 Desire (RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4. 06.00.02_2_release_126984_signed) and extracted the ROM.zip from the installer. I renamed the file to PB99IMG.zip and manually moved it to the SDcard using my computer.
But, when I enter HBOOT the file is recognized and extracted, but then it fails ...due to an "incorrect CID".
The same happens if I manually execute the RUU....exe under Windows with my phone plugged in via USB. (It's error code 131 in the flash program of the RUU....exe).
A very helpful user (cargo) of a german Android forum (www.android-hilfe.de - link to his posting) assumed that my HBOOT is not correctly displayed and I might have a "newer" one than 0.80.0000
This leaves me quite without any option than to flash HTC RUU 2.29.405.5, which brings HBOOT 0.93.0001...(but I may be able to downgrade again.)
But this flash process is only possible if I have a Goldcard, which I actually don't have at the moment
Is there any way to create a Goldcard for my device in my actual position (only fastboot working, no boot to run the system, no adb working, no recovery access)?
Every howto explaining the goldcard crating process requires either working adb or even a running system for apps like "goldcard helper" or being able to use "terminal emulator"
I would be very very thankful for every bit of help
Maybe there is some way
Thanks in advance guys!
I believe that goldcards are specific to the card and not the phone(read it somewere on here) so it should be possible to make one without using your phone.
Sent from my HTC Desire using XDA App
TheGhost1233 said:
I believe that goldcards are specific to the card and not the phone(read it somewere on here) so it should be possible to make one without using your phone.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
As far as I know you need the phone for your goldcard. At least it was said in the tutorial I was following a few months back. You need to connect the phone to get the serial number (through ADB shell) which you will need to hex-reverse and put it on your SD card image.
To be honest, they are more sophisticated methods now (as I read) creating a goldcard, but since unrEVOked, i do not follow that part.
And by the way, why don't you flash the HTC RUU 2.29.405.5? 0.93 HBOOT can be downgraded. But with the latest tools you can S-Off, root & whatever with that HBOOT, too.
I just tried flashing the HTC RUU 2.29.405.5 with the PB99IMG-method.
But I get an error "CID incorrect"
I treid to execute the HTC RUU.exe and I get again error code 131...which means something like "user-ID error"
But I could grab a screenshot of the actual "version" of the RUU...or what is this?
Thanks guys
CID incorrect? Your phone is unbranded or branded? Because I found this:
ERROR [294] : INVALID VENDOR ID
Every device contains a short string that identifies the operator who sold it. Because the same device is sold by different operators, this prevents users from flashing a T-Mobile ROM to a device that was sold by Orange, for example. You probably need to Install a HardSPL or CID Unlock your device.
Click to expand...
Click to collapse
I recommend to find a RUU for your device (e.g Vodafone, T-mobile etc.)
Also:
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
Click to expand...
Click to collapse
If it's saying wrong CID then it's branded, simple as that
1. Boot your phone in fastboot
2. Run the ruu that matches your phone.
You need a T-mobile branded ruu.
You can look here for one that matches. http://shipped-roms.com/index.php?category=android&model=Bravo
I think you can try an UK one, because it is multilingual.
If it is giving you the same errors, then you picked a wrong version.
EddyOS said:
If it's saying wrong CID then it's branded, simple as that
Click to expand...
Click to collapse
well it said "incorrect cid" even with a t-mobile branded ruu :/
If you are rooted, then boot into the bootloader and flash a custom rom. Then create a gold card.
Lennyz1988 said:
If you are rooted, then boot into the bootloader and flash a custom rom. Then create a gold card.
Click to expand...
Click to collapse
Yes, try that too, if you can.
Also use a NOA2SD Rom if you dont have ext partition. Or create one on your PC (if you want to use an A2SD ROM).
How can I flash a Rom using the bootloader?
Simply rename the zipped Image of a custom Rom into "PB99IMG.zip", put in on the SDcard and boot into HBOOT?
Thank you
spaboleo said:
How can I flash a Rom using the bootloader?
Simply rename the zipped Image of a custom Rom into "PB99IMG.zip", put in on the SDcard and boot into HBOOT?
Thank you
Click to expand...
Click to collapse
Yes, if you rooted with unrEVOked. Boot in to recovery (clockworkMOD/AmonRa) wipe all data and flash a CUSTOM rom.
You don't have to rename it, it can be anything as soon as it is .zip
nagypapi said:
Yes, if you rooted with unrEVOked. Boot in to recovery (clockworkMOD/AmonRa) wipe all data and flash a CUSTOM rom.
You don't have to rename it, it can be anything as soon as it is .zip
Click to expand...
Click to collapse
Uhm...flashing a custom rom in general is no problem...but i can't access Recvoery
as described in the initial post of the thread only the bootloader (HBOOT) and fastboot are working.
spaboleo said:
Uhm...flashing a custom rom in general is no problem...but i can't access Recvoery
as described in the initial post of the thread only the bootloader (HBOOT) and fastboot are working.
Click to expand...
Click to collapse
Yeah, sorry, my bad.
Well you can try to falsh it via PB99IMG.zip, but i won't think it work.
your only hope is finding a working RUU. (at least seems to me, if you can access only fastboot).
Hi all, have same trouble with flashing via PB99IMG, but in my case, the device normally loads the firmware and returned to fastbut. When you try to go to recovery device hangs on the logo. Фfter removing the battery and re-attempt to restart the device, it begins to vibrate 7 times and then freezes on the logo. What do these vibration?
PB99IMG.zip will work as you don't need recovery. Just put it on the root of your SD card and boot into HBOOT. It'll find the file and flash it
did renaming rom to pb99img nd flash via hboot work for you?
i have a similar problem, rather same prob, only fastboot available
To let this thread maintain usefullness for future readers:
The solution was to take a goldcard from a friend and flash the right (matching hboot, provider and version) RUU, by using the PB99IMG method.
By this the phone will be set back to it's delivery state! This will include the Rom, all data in the NAND storage the recovery and everything else, which got modified like getting root access or S-OFF etc.
Troubles were caused by USB-Brick or an error on my old ext3 partition or maybe even corrupt data in my Titanium file-backup I restored a few days before the crash :/
I can't clearly say what is the main cause...maybe it was a combination of all.
If you don't have got any chance of getting another goldcard (yes the goldcard creation does NOT depend on the devices! It can be created with ANY android phone ) you are really screwed.
My advice: Always keep a spare microSD card, equipped with it's goldcard image around!
Because I was not able to find any method to echo the CID (Id of the SDcard) in fastboot.
Greetings
And good luck to all of you having comparable issues
Hey Guys,
Right I've been up all night trying to fix this but now I'm at the stage where I need your wisdom!
Problem:
Got a rooted, s-off'd HTC desire (originally on 3 UK running a 3 branded rom, rooted via goldcard method)
It was running Redux and the hboot I was using was CM7. I decided to change back to Oxygen, and proceeded to flash the Oxygen Hboot. I also flashed the latest version of Clockwork Mod Recovery. All was done through terminal in ubuntu using fastboot. I also erased cache, system and boot, before rebooting into recovery and flashing Oxygen. Seemed to install fine so I rebooted into Oxygen and it loaded up. During the setup process my phone informed me that it couldn't find a SIM card. Rebooted into recovery and wiped everything (including dalvik) and still the same problem persisted.
It was at this time I found out that I couldn't mount my SD card either (either in Oxygen or in recovery).
Followed the usb-brick-rickrolled-b0rked-fixed method to resolve the SD card problem.
I used the OP's zip file attached, missed out step 1 and carried on from step 2 (used my Blackberry to get the update file on the SD card).
Anyway it all seemed fixed and Oxygen was booting up fine, sim card was being read, but I found that most of the time my laptop would not discover my phone when attached in storage mode.
Then I decided to start from scratch and restore my desire to a stock htc rom. After preparing my goldcard and getting the RUU I ran the update. The ROM I installed was: RUU_Bravo_H3G_UK_1.22.771.1_Radio_32.36.00.28U_4.0 6.00.02_2_release_127568_signed.exe
(I tried installing a stock froyo RUU before that one and I couldn't. It came up with an error that said invalid vendor ID or something similar)
The restore seemed to go fine until the update utility told me everything was done and rebooted my phone. End result was that the phone's LCD is now not working at all. I've checked the back of my phone's box and all that is written in there is:
Display - 3.7-inch touch-sensitive screen.
The phone boots (it's making all the noises etc). I can get it into fastboot as well and get fastboot oem bootloader info etc. But ADB is not working and I've got a feeling the wrong RUU has been flashed hence screen death.
To make things worse, when I plug the desire into my laptop (with a fresh install of htc sync to flash new rom etc) device manager sees it as: qualcomm cdma technologies msm.
It won't recogize it as a htc desire at all. Tried a different laptop with new htc sync install etc but still the same issue.
Spent like 5/6 hours last night trying to figure this out but now I'm stuck.
Seems like the only access I have to the phone is via fastboot. Is there anything I can do to recover this phone?
Any help would be appreciated.
http://forum.xda-developers.com/showthread.php?t=768256
Try this.. in that thread go to post 2 .. their is section Recovery from broken screen
jhonybravo4u said:
http://forum.xda-developers.com/showthread.php?t=768256
Try this.. in that thread go to post 2 .. their is section Recovery from broken screen
Click to expand...
Click to collapse
had a look at that, however thing is I can't access adb at all..and i got a feeling my goldcard didn't work so I can't create a new one as i cannot find out the CID..
The only thing I can do is use fastboot to reboot into rebootRUU and try to flash the ROM manually. It keeps failing and giving the following error:
c:\android-sdk-windows\tools>fastboot flash zip rom.zip
sending 'zip' (164913 KB)...
OKAY [ 29.190s]
writing 'zip'...
(bootloader) adopting the signature contained in this image...
(bootloader) signature checking...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
FAILED (remote: 42 custom id check fail)
finished. total time: 58.717s
Tried flashing a h3G rom and it flashes but still no screen...I can only find two h3g roms. anyone come across any other [uk] three network RUU?
Fixed!!!!
After much google searching/reading over here at XDA and modaco I finally figured it out
1) Made a new gold card, flashed a froyo RUU via fastboot which brought the SLCD back to life and gave me a working froyo unrooted rom (still with no adb/usb access)
2) Created a new misc partition img file using various guides available.
3) Used quanchi's guide to use rageagainstthecage exploit, to allow the misc partition to be flashed.
Laptop is correctly recognizing the desire now
Quitly Brilliant .. ;-) I guess 1st thing you need to do is create a goldcard while your mobile is working
Hi guys,
I have a problem where I am trying to flash a rom by placing PB99IMG.zip in the root of my SD card and booting into HBOOT.
HBOOT checks for all the standard files but skips the PB99IMG.zip I loaded as if it wasn't there.
Does anyone know why this could be happening?
I tried different zips, ones I downloaded directly from shipped roms and another one I extracted from an RUU. None of them seem to be recognized, they all get ignored.
Which RUU did you get the ZIP from? And have you called it PB99IMG.zip (not .zip.zip)?
The SD card ur using is it a goldcard
The Best Things Come To Those Who Wait
I tried these ones:
RUU_Bravo_Telstra_WWE_1.15.841.14_R4_Radio_32.30.00.28U_4.05.00.11_123851.exe
RUU_Bravo_Froyo_Telstra_WWE_2.26.841.2_Radio_32.48.00.32U_5.11.05.14_release_150162_signed.exe
The later one was downloaded straight from the HTC website, after inserting my IMEI number so it's official.
I also tried to make a gold card but it still didn't work. I am also rooted so I shouldn't need a goldcard anyway?
Does the HBOOT on the phone (currently 0.93) have to be the same version as the HBOOT that the zip is expecting?
Found this somewhere else, xda is being funny at my end else i'd reference it properly and give credit where its due.
You can extract the ROM.zip from any RUU to install via ZIP
Start the RUU and once at the first main screen click Start>Run and type
%temp%
now, find the newest folder and in there will be a ZIP file called Rom - copy this to your desktop and rename it PB99IMG. Now copy this to your SD card and start the phone in HBOOT (turn it on whilst holding volume down). It will find the file and start the update. Just follow the instructions...
It will wipe your phone, though
Click to expand...
Click to collapse
Hello Yoda,
What you describe is exactly what I did. I renamed the rom.zip file I found in the temp folder to PB99IMG.zip (not ...zip.zip).
I booted into HBOOT but the file just gets ignored. I also installed alpharev custom HBOOT to see if S-OFF would make any difference. It still gets ignored!!
Can anyone help?
If not, is there any way to downgrade HBOOT (say from 0.93 to 0.92) without using PB99IMG.zip?
I had same problem with HBOOT 0.93
You need to downgrade to stock Hboot.
I used this tool :
http://forum.xda-developers.com/showthread.php?t=768256
Follow the instructions ( my phone was not branded , worked for me without a gold card ) , downgrade , after that unrevoked3 , alpharev = S-off Desire
Hi aditirex,
I tried tool you mentioned. I ran the linux version. Everything looked promising, I got no errors but the downgrade didn't happen. I still have HBOOT 0.93 when I rebooted.
Does anyone else know any ways to downgrade HBOOT without using PG99IMG.zip?
(I even tried to format with FAT32 using a card reader, and then the goldcard tool - still nothing)
Anyone? Please?
I really need to get this done to claim my warranty.
I read in another post that you can flash HBOOT using the android SDK:
fastboot flash boot boot.img
But I'm guessing this is an image saved by a nandroid backup.
Does anyone know if I can obtain the img file from PB99IMG.zip?
http://forum.xda-developers.com/showthread.php?t=695667 . Use one that is not froyo . It should revert the phone to default settings .
I was doing a first-time root. CWM installed OK. Then I did something TOTALLY STUPID...and the end result is perm. Splash screen.
On normal power-up, it's stuck on Splash screen white backgound with green "HTC".
It won't go any further.
Tried Recovery but didn't do BACK-UP!! I don't have access to another phone that supports micro-SD, to transfer the file to SD, insert in HTC and use it with Recovery CWM that way?? (Guessing)
I don't know any fastboot/ recovery commands for cmd prompt to send new ROM to the phone.
My phone stats:
***UNLOCKED***
Marvel PVT SHIP S-ON RL
MICROP-0451
Radio 7.57.39.10M
Android: 2.3.5
ROM: 2.26.401.3
Kernal: 2.6.35.10
HBoot: 1.09.
HTC Sense Version: 2.1
Carrier: Network Unlocked
I can still HBOOT.
CWM is still working Recovery
I've managed to get the shipped rom that closest matches mine via shipped-roms.com- RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
Or I also got PG76img.zip from xda thread [Marvelc] PG76IMG ZIPs (Taking requests) by member Kalaker (Thank you)
So I have to find a way to flash via PC only.
should add:
When I tried to run the Marvel exe direct, the wizard stalls at the Verifyinf stage as"Error [170]: USB CONNECTION ERROR". The ROM Update Utility cannot connect to your Android phone. Please check that the USB cable is connected properly between the PC and your Android phone.
It is!
I'm using Windows XP
Please help.
Thanks
GERJDOY said:
I was doing a first-time root. CWM installed OK. Then I did something TOTALLY STUPID...and the end result is perm. Splash screen.
On normal power-up, it's stuck on Splash screen white backgound with green "HTC".
It won't go any further.
Tried Recovery but didn't do BACK-UP!! I don't have access to another phone that supports micro-SD, to transfer the file to SD, insert in HTC and use it with Recovery CWM that way?? (Guessing)
I don't know any fastboot/ recovery commands for cmd prompt to send new ROM to the phone.
My phone stats:
***UNLOCKED***
Marvel PVT SHIP S-ON RL
MICROP-0451
Radio 7.57.39.10M
Android: 2.3.5
ROM: 2.26.401.3
Kernal: 2.6.35.10
HBoot: 1.09.
HTC Sense Version: 2.1
Carrier: Network Unlocked
I can still HBOOT.
CWM is still working Recovery
I've managed to get the shipped rom that closest matches mine via shipped-roms.com- RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
Or I also got PG76img.zip from xda thread [Marvelc] PG76IMG ZIPs (Taking requests) by member Kalaker (Thank you)
So I have to find a way to flash via PC only.
should add:
When I tried to run the Marvel exe direct, the wizard stalls at the Verifyinf stage as"Error [170]: USB CONNECTION ERROR". The ROM Update Utility cannot connect to your Android phone. Please check that the USB cable is connected properly between the PC and your Android phone.
It is!
I'm using Windows XP
Please help.
Thanks
Click to expand...
Click to collapse
You can mount the MicroSD card from the recovery, you will find the option in "Mounts and storage" or something with a similar name
csoulr666 said:
You can mount the MicroSD card from the recovery, you will find the option in "Mounts and storage" or something with a similar name
Click to expand...
Click to collapse
Thanks.
Yes, in Recovery>Mounts & Storage, there is an option to mountSD.
I didn't see what this would do. BUT I did mounted the SD, re-ran Marvel.exe- in both Recovery AND normal power on Splash screen.
But I still got the same error message as before: "USB CONNECTION FAILED".
I think I need a command that works in cmd like the one on the Unlock BootLoader stage: e.g. the two-fold cd \Android & \Android>fastboot oem get_ etc.
Thanks
GERJDOY said:
Thanks.
Yes, in Recovery>Mounts & Storage, there is an option to mountSD.
I didn't see what this would do. BUT I did mounted the SD, re-ran Marvel.exe- in both Recovery AND normal power on Splash screen.
But I still got the same error message as before: "USB CONNECTION FAILED".
I think I need a command that works in cmd like the one on the Unlock BootLoader stage. The two-fold cd \Android & \Android>fastboot oem get_ etc.
Thanks
Click to expand...
Click to collapse
You won't be able to run any thing from there, what you can do is transfer a ROM and flash it. Try using the stock roms from here
csoulr666 said:
You won't be able to run any thing from there, what you can do is transfer a ROM and flash it. Try using the stock roms from here
Click to expand...
Click to collapse
Thank you for the advice and link
Used a Galaxy S4 to download the ROM from the thread that links in the post above. THANK YOU.
Now I shall:
Insert into HTC
HBOOT>Recovery>Mounts & Storage>Mount SD>+++++Go Back+++++>Install zip from sdcard
And this should install:
from thread: [ROM]stock rom with cool features & perfectly stock roms[UPDATED:15/03/2013] by member crossfire77
PERFECTLY STOCK ROMS IN VARIOUS VERSIONS
FOR MARVEL
its based on latest EU 2.26.401.3 release,android version :2.3.5 [MULTILANGUAGE SUPPORT]
3) it is perfectly stock rom,not even rooted.of course odexed.
http://www.mediafire.com/?zwzyawscawlgwvs
Thanks (& fingers crossed)
Tried to install ROM from zip:
I got:
E:Error in /sdcard/marvel_signed_021213_001159.zip
(status 0)
Any ideas what happened?
Spent the evening/night trying a few different things.
Tried a different ROM, on a different SD Card- so as not to jeopardize the copy I have.
So I download, via the Galaxy S4,:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from
www.androidruu.com/?developer=Marvel_MarvelC[/url]
Put the card in the HTC & the download was not listed on the SDCard!
It's definitely there- rechecked it in the S4!
I thought maybe the Wildfire could not see it for some reason so made a folder with the S4, called it Xda & copied the file into it.
So there are now two copies- #1 directly on the card & #2 in the new Xda folder.
I put the card back in the HTC Wildfire & yet again neither were showing. #1 still did not show & although the Xda folder WAS there, the phone read it as having no files!!
So, I thought there might be a problem with either the card OR the downloaded file.
SO....
I got the original SD Card that has the marvel_signed_021213_001159.zip on it, that failed to load earlier, & I downloaded:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from shipped-roms.com/index.php?category=android&model=Marvel
Once again, when I put the SD Card into the Wildfire- NOTHING. No file, yet, according to the S4 it's there- right above the marvel from earlier.
Strange? I can not work it out. There is no dot/ full stop before the name on either download on either SD card- a method to hide files apparently on the S4.
At least I've got one working? copy from earlier but THAT still returns the message:
E:Error in /sdcard/marvel_signed_021213_001159.zip (status 0)
Have not found a direct PC to phone method yet either.
Thanks
GERJDOY said:
Spent the evening/night trying a few different things.
Tried a different ROM, on a different SD Card- so as not to jeopardize the copy I have.
So I download, via the Galaxy S4,:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from
www.androidruu.com/?developer=Marvel_MarvelC[/url]
Put the card in the HTC & the download was not listed on the SDCard!
It's definitely there- rechecked it in the S4!
I thought maybe the Wildfire could not see it for some reason so made a folder with the S4, called it Xda & copied the file into it.
So there are now two copies- #1 directly on the card & #2 in the new Xda folder.
I put the card back in the HTC Wildfire & yet again neither were showing. #1 still did not show & although the Xda folder WAS there, the phone read it as having no files!!
So, I thought there might be a problem with either the card OR the downloaded file.
SO....
I got the original SD Card that has the marvel_signed_021213_001159.zip on it, that failed to load earlier, & I downloaded:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from shipped-roms.com/index.php?category=android&model=Marvel
Once again, when I put the SD Card into the Wildfire- NOTHING. No file, yet, according to the S4 it's there- right above the marvel from earlier.
Strange? I can not work it out. There is no dot/ full stop before the name on either download on either SD card- a method to hide files apparently on the S4.
At least I've got one working? copy from earlier but THAT still returns the message:
E:Error in /sdcard/marvel_signed_021213_001159.zip (status 0)
Have not found a direct PC to phone method yet either.
Thanks
Click to expand...
Click to collapse
Hi,
AFAIK, you will not be able to flash an .exe file from the SD card, there were meant to be used on a PC for flashing through the USB cable, so you will only be able to flash .zip files from the SD card.
The E:Error in /sdcard/marvel_signed_021213_001159.zip (status 0) error is usually associated with a bad META-INF folder inside the zip file, meaning that either the signature file is corrupted, there is something wrong in the any of the files inside this folder, or just the whole zip file is corrupted. CWM is preventing you from doing something wrong.
Try to download and flash the file again, wait for more answers and, as a last resort, try with a different zip file (search for exactly the same rom) or another version in the thread that @csoulr666 posted (options 1 or 2).
Regards.
Still looking for an answer to my USB issue. In the meantime I tried 1 of uk_yo tachibana's suggestions
Downloaded a fresh copy of marvel_signed_021213_001159.zip & clicked install zip from SD card.
This time I got:
--Installing: /sdcard/marvel_signed_021213_001159.zip
Finding update package...
Opening update package...
The handset has been like this since around 10.05 am. I was expecting something else to happen by now (3 hours + later)
I will leave it a while longer, before I try another file.
I assume it has crashed again?
Thanks.
UPDATE:
I've been trying various downloads & ways, yesterday and today. Read umpteen threads & websites.
I've tried multiple downloads of the files. I've used two SD Cards (to verify that SD was not an issue). Also, used both with all files via 2 browsers- Chrome & FireFox, as 1 thread I read recommended that the questionair tries downloading the files with another browser; as either the files are corrupt or the download was- as they too kept getting the "Installation aborted (Status 0)" error.
example of what I keep getting:
Insert SDcard to WildfireS. HBOOT>Recovery
(every time) I do the four wipes...
Wipe data/factory reset
Wipe cache partition completed
(Advanced)
Wipe Dalvik Cache
Wipe Battery Stats
+++++Go Back+++++
Then I click:
- Install zip from sdcard
My options
- choose zip from sdcard
- apply /sdcard/update.zip
- toggle signiture verification
- toggle script asserts
-+++++Go Back+++++
I click:
- choose zip from sdcard
I get my list of files/folders on sdcard
I choose:
(example) marvel_signed_021213_015156.zip
the handset then starts:
--Installing: /sdcard/marvel_signed_021213_015156.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/marvel_signed_021213_015156.zip
(status 0)
Installation aborted
Files I've used (multiple downloads of):
#1
021213_024029.zip
021213_015156.zip
021213_001159.zip
from: [ROM]stock rom with cool features & perfectly stock roms[UPDATED:15/03/2013] by member crossfire77
#2
G76IMG.zip
from: [ROM][HTC][WILDFIRE S A510e][EUROPE][2.3.5][PG76IMG.ZIP] To Flash From Hboot by member d33ps1x
This one returns the error message:
Installing update...
E:Error in /sdcard/PG76IMG.zip
(bad)
Installation aborted
#3
and also:
marvel_perfect_stock.zip
from: [ROM][STOCK 2.3.5]marvel perfectly stock rom... not even rooted!!! by member rjshrjndrn
Even though, later in the thread, the OP says it's not flashable from SD Card as it isn't .img & says renaming is not an option. Just thought I would give it a shot!
I'm looking into "how to rip a PG76IMG off from %temp%"?.
(a) Not sure how to do this yet
(b) If it will even work
HOWEVER, marvel_perfect_stock.zip SHOULD work as is; as a zip- so I put a copy in my PC folder (with the rest of my files-fastboot, adb, cwm etc.).
I just don't know how to use it- there must be some kind of cmd prompt instruction, but it is not listed.
Still can not get past the Marvel_RUU wizard's error from earlier yet, either!
Thanks.
Hello.
On the SD Card side of things, I have read threads that suggest, after multiple downloads [even through different browsers] of a file still return the (Status 0)/ (bad)- that maybe my cwm version needs updating, in order to push the chosen file through.
After doing a "Google search" for cwm for wildfire s download, I got two main options:
1) clockworkmod.com/rommanager BUT, this only offers ver: 5.0.2.8 which is already the one I have.
2) code.google.com/p/cm9-wildfire-s/downloads/detail?name...cwm...THIS gives me a download: Unoffical ClockworkMod v6.0.0.7 Recovery for Marvel.
The file is PG76IMG-cwm-6.0.0.7-UNOFFICIAL-marvel.zip 4.5 MB. [You need to rename it to PG76IMG.zip and copy it to your SD card.]
Now I have already downloaded it [via Firefox on Galaxy S4, renamed as instructed & put on SD]
I JUST HAVE NOT installed/ ran it yet on the Wildfire S as I'm unsure if it's safe to do so OR even if I SHOULD mess around further with the handset/ WORKING Recovery [esp. as the file states UNOFFICIAL CwM]!
Any thoughts on this, as I'm running out of options for solutions?
Thanks.
Aaaah NEARLY!!!!!!!
Found this thread:
Htc wildfire s Stock rom by member gabontz_vl
It advised to go to follow this link:
androidforums.com/wildfire-s-...ed-device.html
So I did this and I followed it's advice and got the Wizard working:
HAD TO ***Relocked*** my Bootloader gurrrr! Will have to unlock again when I have my ROM back!
HTC Android Phone ROM Update Utility 1.0.5.2011
Current information about your Android phone:
Image version:
19.26.401.3
<Click update>
From 19.26.401.3
to
2.26.401.3
Phone restarts; "HTC" appears on black screen
Wizard says the process will take 10 mins to update
BUT after NEARLY working, it failed saying:
ERROR [140]: BOOTLOADER VERSION ERROR
The ROM Update cannot update your Android phone.
Please get correct ROM Update Utility and try again.
Note the wizard matched my ROM & Radio perfectly.
Have not messed with HBOOT. It's still the original 1.09.0099.
Where do I go from here?
Thanks
GERJDOY said:
Aaaah NEARLY!!!!!!!
Found this thread:
Htc wildfire s Stock rom by member gabontz_vl
It advised to go to follow this link:
androidforums.com/wildfire-s-...ed-device.html
So I did this and I followed it's advice and got the Wizard working:
HAD TO ***Relocked*** my Bootloader gurrrr! Will have to unlock again when I have my ROM back!
HTC Android Phone ROM Update Utility 1.0.5.2011
Current information about your Android phone:
Image version:
19.26.401.3
<Click update>
From 19.26.401.3
to
2.26.401.3
Phone restarts; "HTC" appears on black screen
Wizard says the process will take 10 mins to update
BUT after NEARLY working, it failed saying:
ERROR [140]: BOOTLOADER VERSION ERROR
The ROM Update cannot update your Android phone.
Please get correct ROM Update Utility and try again.
Note the wizard matched my ROM & Radio perfectly.
Have not messed with HBOOT. It's still the original 1.09.0099.
Where do I go from here?
Thanks
Click to expand...
Click to collapse
Try using a zip extracted from an RUU
1. First download and run an RUU on your computer(the latest one you can find)
2. After the first window pops up, close it
3. Then in "Run" type "%temp%"
4. In there find a file named "ROM.zip"
5. Rename it to "PG76IMG.zip"
6. Put it on the root of the SDcard(no folders)
7. Now boot into the bootloader
8. It will check and ask you to flash the file, press the Vol up button
9. And you'll get a completely stock rom
Do make sure that your bootloader is Relocked when you do this, you can unlock it using the same unlock code
csoulr666 said:
Try using a zip extracted from an RUU
1. First download and run an RUU on your computer(the latest one you can find)
2. After the first window pops up, close it
3. Then in "Run" type "%temp%"
4. In there find a file named "ROM.zip"
5. Rename it to "PG76IMG.zip"
6. Put it on the root of the SDcard(no folders)
7. Now boot into the bootloader
8. It will check and ask you to flash the file, press the Vol up button
9. And you'll get a completely stock rom
Do make sure that your bootloader is Relocked when you do this, you can unlock it using the same unlock code
Click to expand...
Click to collapse
I've just spotted the reply, thank you for the advice csoulr666.
Yes I will do this now & let you know how I get on.
Again, thanks.
Thanks again to csoulr666.
Followed the instructions to the letter.
After powering on in HBOOT, the handset automatically began "checking...PG76IMG.zip". A load-bar appeared at the top-righthand corner of the screen. When checking completed, I got:
Main Version is older!
Update fail!
Press <power> to reboot.
Now, I extracted from RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe-
as the stats for my software were ROM: 2.26.401.3 & Radio 7.57.39.10M.
A perfect match. So what is this "Main Version is older" referring to?
I am a little confused.
Thanks.
GERJDOY said:
Thanks again to csoulr666.
Followed the instructions to the letter.
After powering on in HBOOT, the handset automatically began "checking...PG76IMG.zip". A load-bar appeared at the top-righthand corner of the screen. When checking completed, I got:
Main Version is older!
Update fail!
Press <power> to reboot.
Now, I extracted from RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe-
as the stats for my software were ROM: 2.26.401.3 & Radio 7.57.39.10M.
A perfect match. So what is this "Main Version is older" referring to?
I am a little confused.
Thanks.
Click to expand...
Click to collapse
Try using one that is newer than your current version
Thank you to csoulr666 for the advice. I apologise for the delay in responding (as I saw this at 9am). I have spent the day (& most of last night ) on Google, reading umpteen threads-
"googling": ERROR [140]: BOOTLOADER VERSION ERROR/ The ROM Update cannot update your Android phone/ Main Version is older/ ruu could not update my rom version/ latest stock rom for wildfire s/ htc wildfire s newest update/ original stock rom for htc wildfire s/ stock roms for wildfire s/ HTC Wildfire S Software newer than 2.26.401.3/ update from 2.26.401.3/ update android 2.3 6/ download android 2.3 6 for htc wildfire s.
The latest RUU IS 2.26.401.3. That is the one I am using, both as RUU, & to extract the ROM to .zip. I can not find ANY NEWER RUU.
I am unclear as to what "Try using one that is newer than your current version" referrs to, sorry; so I could only reason that it must be the Android version.
As the RUU is the latest- 2.26, it should surely contain ver:2.3.5. If it's not, which the error messge implies it's not?, I'm not sure how to check the Android version contained within nor how to replace it as I can not find a seperate 2.3.5 file. I can not find an Android 2.3.5 file download, nor how to update an RUU in .exe form or an independant ROM .zip ripped from it, .
I am now really stuck & fresh out of ideas.
Thanks
GERJDOY said:
Thank you to csoulr666 for the advice. I apologise for the delay in responding (as I saw this at 9am). I have spent the day (& most of last night ) on Google, reading umpteen threads-
"googling": ERROR [140]: BOOTLOADER VERSION ERROR/ The ROM Update cannot update your Android phone/ Main Version is older/ ruu could not update my rom version/ latest stock rom for wildfire s/ htc wildfire s newest update/ original stock rom for htc wildfire s/ stock roms for wildfire s/ HTC Wildfire S Software newer than 2.26.401.3/ update from 2.26.401.3/ update android 2.3 6/ download android 2.3 6 for htc wildfire s.
The latest RUU IS 2.26.401.3. That is the one I am using, both as RUU, & to extract the ROM to .zip. I can not find ANY NEWER RUU.
I am unclear as to what "Try using one that is newer than your current version" referrs to, sorry; so I could only reason that it must be the Android version.
As the RUU is the latest- 2.26, it should surely contain ver:2.3.5. If it's not, which the error messge implies it's not?, I'm not sure how to check the Android version contained within nor how to replace it as I can not find a seperate 2.3.5 file. I can not find an Android 2.3.5 file download, nor how to update an RUU in .exe form or an independant ROM .zip ripped from it, .
I am now really stuck & fresh out of ideas.
Thanks
Click to expand...
Click to collapse
Did you get this sorted?
I too had the same problems as you. I am on the same HBOOT and radio and my Cid is O2__001 (UK) and all the errors you encountered were the same for me.
I got it working tonight by creating a GOLDCARD SD card (search XDA/Google for it and use Youtube to find out how to create one) and using the Rom extracted from the latest RUU 2.26.401.3.
Now im totally stock.
If you need anymore help PM me.
fgw3987 said:
Did you get this sorted?
I too had the same problems as you. I am on the same HBOOT and radio and my Cid is O2__001 (UK) and all the errors you encountered were the same for me.
I got it working tonight by creating a GOLDCARD SD card (search XDA/Google for it and use Youtube to find out how to create one) and using the Rom extracted from the latest RUU 2.26.401.3.
Now im totally stock.
If you need anymore help PM me.
Click to expand...
Click to collapse
Am having the same issue. Error 140. Can you help me pls.
ketchi_ks said:
Am having the same issue. Error 140. Can you help me pls.
Click to expand...
Click to collapse
Sorry mate, I no longer have this phone. Did u try the steps I took?
Sent from my HTC One using XDA Free mobile app