Flash new ROM to a soft-bricked Spalsh screen using PC only. - HTC Wildfire S

I was doing a first-time root. CWM installed OK. Then I did something TOTALLY STUPID...and the end result is perm. Splash screen.
On normal power-up, it's stuck on Splash screen white backgound with green "HTC".
It won't go any further.
Tried Recovery but didn't do BACK-UP!! I don't have access to another phone that supports micro-SD, to transfer the file to SD, insert in HTC and use it with Recovery CWM that way?? (Guessing)
I don't know any fastboot/ recovery commands for cmd prompt to send new ROM to the phone.
My phone stats:
***UNLOCKED***
Marvel PVT SHIP S-ON RL
MICROP-0451
Radio 7.57.39.10M
Android: 2.3.5
ROM: 2.26.401.3
Kernal: 2.6.35.10
HBoot: 1.09.
HTC Sense Version: 2.1
Carrier: Network Unlocked
I can still HBOOT.
CWM is still working Recovery
I've managed to get the shipped rom that closest matches mine via shipped-roms.com- RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
Or I also got PG76img.zip from xda thread [Marvelc] PG76IMG ZIPs (Taking requests) by member Kalaker (Thank you)
So I have to find a way to flash via PC only.
should add:
When I tried to run the Marvel exe direct, the wizard stalls at the Verifyinf stage as"Error [170]: USB CONNECTION ERROR". The ROM Update Utility cannot connect to your Android phone. Please check that the USB cable is connected properly between the PC and your Android phone.
It is!
I'm using Windows XP
Please help.
Thanks

GERJDOY said:
I was doing a first-time root. CWM installed OK. Then I did something TOTALLY STUPID...and the end result is perm. Splash screen.
On normal power-up, it's stuck on Splash screen white backgound with green "HTC".
It won't go any further.
Tried Recovery but didn't do BACK-UP!! I don't have access to another phone that supports micro-SD, to transfer the file to SD, insert in HTC and use it with Recovery CWM that way?? (Guessing)
I don't know any fastboot/ recovery commands for cmd prompt to send new ROM to the phone.
My phone stats:
***UNLOCKED***
Marvel PVT SHIP S-ON RL
MICROP-0451
Radio 7.57.39.10M
Android: 2.3.5
ROM: 2.26.401.3
Kernal: 2.6.35.10
HBoot: 1.09.
HTC Sense Version: 2.1
Carrier: Network Unlocked
I can still HBOOT.
CWM is still working Recovery
I've managed to get the shipped rom that closest matches mine via shipped-roms.com- RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe
Or I also got PG76img.zip from xda thread [Marvelc] PG76IMG ZIPs (Taking requests) by member Kalaker (Thank you)
So I have to find a way to flash via PC only.
should add:
When I tried to run the Marvel exe direct, the wizard stalls at the Verifyinf stage as"Error [170]: USB CONNECTION ERROR". The ROM Update Utility cannot connect to your Android phone. Please check that the USB cable is connected properly between the PC and your Android phone.
It is!
I'm using Windows XP
Please help.
Thanks
Click to expand...
Click to collapse
You can mount the MicroSD card from the recovery, you will find the option in "Mounts and storage" or something with a similar name

csoulr666 said:
You can mount the MicroSD card from the recovery, you will find the option in "Mounts and storage" or something with a similar name
Click to expand...
Click to collapse
Thanks.
Yes, in Recovery>Mounts & Storage, there is an option to mountSD.
I didn't see what this would do. BUT I did mounted the SD, re-ran Marvel.exe- in both Recovery AND normal power on Splash screen.
But I still got the same error message as before: "USB CONNECTION FAILED".
I think I need a command that works in cmd like the one on the Unlock BootLoader stage: e.g. the two-fold cd \Android & \Android>fastboot oem get_ etc.
Thanks

GERJDOY said:
Thanks.
Yes, in Recovery>Mounts & Storage, there is an option to mountSD.
I didn't see what this would do. BUT I did mounted the SD, re-ran Marvel.exe- in both Recovery AND normal power on Splash screen.
But I still got the same error message as before: "USB CONNECTION FAILED".
I think I need a command that works in cmd like the one on the Unlock BootLoader stage. The two-fold cd \Android & \Android>fastboot oem get_ etc.
Thanks
Click to expand...
Click to collapse
You won't be able to run any thing from there, what you can do is transfer a ROM and flash it. Try using the stock roms from here

csoulr666 said:
You won't be able to run any thing from there, what you can do is transfer a ROM and flash it. Try using the stock roms from here
Click to expand...
Click to collapse
Thank you for the advice and link
Used a Galaxy S4 to download the ROM from the thread that links in the post above. THANK YOU.
Now I shall:
Insert into HTC
HBOOT>Recovery>Mounts & Storage>Mount SD>+++++Go Back+++++>Install zip from sdcard
And this should install:
from thread: [ROM]stock rom with cool features & perfectly stock roms[UPDATED:15/03/2013] by member crossfire77
PERFECTLY STOCK ROMS IN VARIOUS VERSIONS
FOR MARVEL
its based on latest EU 2.26.401.3 release,android version :2.3.5 [MULTILANGUAGE SUPPORT]
3) it is perfectly stock rom,not even rooted.of course odexed.
http://www.mediafire.com/?zwzyawscawlgwvs
Thanks (& fingers crossed)

Tried to install ROM from zip:
I got:
E:Error in /sdcard/marvel_signed_021213_001159.zip
(status 0)
Any ideas what happened?

Spent the evening/night trying a few different things.
Tried a different ROM, on a different SD Card- so as not to jeopardize the copy I have.
So I download, via the Galaxy S4,:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from
www.androidruu.com/?developer=Marvel_MarvelC[/url]
Put the card in the HTC & the download was not listed on the SDCard!
It's definitely there- rechecked it in the S4!
I thought maybe the Wildfire could not see it for some reason so made a folder with the S4, called it Xda & copied the file into it.
So there are now two copies- #1 directly on the card & #2 in the new Xda folder.
I put the card back in the HTC Wildfire & yet again neither were showing. #1 still did not show & although the Xda folder WAS there, the phone read it as having no files!!
So, I thought there might be a problem with either the card OR the downloaded file.
SO....
I got the original SD Card that has the marvel_signed_021213_001159.zip on it, that failed to load earlier, & I downloaded:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from shipped-roms.com/index.php?category=android&model=Marvel
Once again, when I put the SD Card into the Wildfire- NOTHING. No file, yet, according to the S4 it's there- right above the marvel from earlier.
Strange? I can not work it out. There is no dot/ full stop before the name on either download on either SD card- a method to hide files apparently on the S4.
At least I've got one working? copy from earlier but THAT still returns the message:
E:Error in /sdcard/marvel_signed_021213_001159.zip (status 0)
Have not found a direct PC to phone method yet either.
Thanks

GERJDOY said:
Spent the evening/night trying a few different things.
Tried a different ROM, on a different SD Card- so as not to jeopardize the copy I have.
So I download, via the Galaxy S4,:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from
www.androidruu.com/?developer=Marvel_MarvelC[/url]
Put the card in the HTC & the download was not listed on the SDCard!
It's definitely there- rechecked it in the S4!
I thought maybe the Wildfire could not see it for some reason so made a folder with the S4, called it Xda & copied the file into it.
So there are now two copies- #1 directly on the card & #2 in the new Xda folder.
I put the card back in the HTC Wildfire & yet again neither were showing. #1 still did not show & although the Xda folder WAS there, the phone read it as having no files!!
So, I thought there might be a problem with either the card OR the downloaded file.
SO....
I got the original SD Card that has the marvel_signed_021213_001159.zip on it, that failed to load earlier, & I downloaded:
RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe from shipped-roms.com/index.php?category=android&model=Marvel
Once again, when I put the SD Card into the Wildfire- NOTHING. No file, yet, according to the S4 it's there- right above the marvel from earlier.
Strange? I can not work it out. There is no dot/ full stop before the name on either download on either SD card- a method to hide files apparently on the S4.
At least I've got one working? copy from earlier but THAT still returns the message:
E:Error in /sdcard/marvel_signed_021213_001159.zip (status 0)
Have not found a direct PC to phone method yet either.
Thanks
Click to expand...
Click to collapse
Hi,
AFAIK, you will not be able to flash an .exe file from the SD card, there were meant to be used on a PC for flashing through the USB cable, so you will only be able to flash .zip files from the SD card.
The E:Error in /sdcard/marvel_signed_021213_001159.zip (status 0) error is usually associated with a bad META-INF folder inside the zip file, meaning that either the signature file is corrupted, there is something wrong in the any of the files inside this folder, or just the whole zip file is corrupted. CWM is preventing you from doing something wrong.
Try to download and flash the file again, wait for more answers and, as a last resort, try with a different zip file (search for exactly the same rom) or another version in the thread that @csoulr666 posted (options 1 or 2).
Regards.

Still looking for an answer to my USB issue. In the meantime I tried 1 of uk_yo tachibana's suggestions
Downloaded a fresh copy of marvel_signed_021213_001159.zip & clicked install zip from SD card.
This time I got:
--Installing: /sdcard/marvel_signed_021213_001159.zip
Finding update package...
Opening update package...
The handset has been like this since around 10.05 am. I was expecting something else to happen by now (3 hours + later)
I will leave it a while longer, before I try another file.
I assume it has crashed again?
Thanks.

UPDATE:
I've been trying various downloads & ways, yesterday and today. Read umpteen threads & websites.
I've tried multiple downloads of the files. I've used two SD Cards (to verify that SD was not an issue). Also, used both with all files via 2 browsers- Chrome & FireFox, as 1 thread I read recommended that the questionair tries downloading the files with another browser; as either the files are corrupt or the download was- as they too kept getting the "Installation aborted (Status 0)" error.
example of what I keep getting:
Insert SDcard to WildfireS. HBOOT>Recovery
(every time) I do the four wipes...
Wipe data/factory reset
Wipe cache partition completed
(Advanced)
Wipe Dalvik Cache
Wipe Battery Stats
+++++Go Back+++++
Then I click:
- Install zip from sdcard
My options
- choose zip from sdcard
- apply /sdcard/update.zip
- toggle signiture verification
- toggle script asserts
-+++++Go Back+++++
I click:
- choose zip from sdcard
I get my list of files/folders on sdcard
I choose:
(example) marvel_signed_021213_015156.zip
the handset then starts:
--Installing: /sdcard/marvel_signed_021213_015156.zip
Finding update package...
Opening update package...
Installing update...
E:Error in /sdcard/marvel_signed_021213_015156.zip
(status 0)
Installation aborted
Files I've used (multiple downloads of):
#1
021213_024029.zip
021213_015156.zip
021213_001159.zip
from: [ROM]stock rom with cool features & perfectly stock roms[UPDATED:15/03/2013] by member crossfire77
#2
G76IMG.zip
from: [ROM][HTC][WILDFIRE S A510e][EUROPE][2.3.5][PG76IMG.ZIP] To Flash From Hboot by member d33ps1x
This one returns the error message:
Installing update...
E:Error in /sdcard/PG76IMG.zip
(bad)
Installation aborted
#3
and also:
marvel_perfect_stock.zip
from: [ROM][STOCK 2.3.5]marvel perfectly stock rom... not even rooted!!! by member rjshrjndrn
Even though, later in the thread, the OP says it's not flashable from SD Card as it isn't .img & says renaming is not an option. Just thought I would give it a shot!
I'm looking into "how to rip a PG76IMG off from %temp%"?.
(a) Not sure how to do this yet
(b) If it will even work
HOWEVER, marvel_perfect_stock.zip SHOULD work as is; as a zip- so I put a copy in my PC folder (with the rest of my files-fastboot, adb, cwm etc.).
I just don't know how to use it- there must be some kind of cmd prompt instruction, but it is not listed.
Still can not get past the Marvel_RUU wizard's error from earlier yet, either!
Thanks.

Hello.
On the SD Card side of things, I have read threads that suggest, after multiple downloads [even through different browsers] of a file still return the (Status 0)/ (bad)- that maybe my cwm version needs updating, in order to push the chosen file through.
After doing a "Google search" for cwm for wildfire s download, I got two main options:
1) clockworkmod.com/rommanager‎ BUT, this only offers ver: 5.0.2.8 which is already the one I have.
2) code.google.com/p/cm9-wildfire-s/downloads/detail?name...cwm...THIS gives me a download: Unoffical ClockworkMod v6.0.0.7 Recovery for Marvel.
The file is PG76IMG-cwm-6.0.0.7-UNOFFICIAL-marvel.zip 4.5 MB. [You need to rename it to PG76IMG.zip and copy it to your SD card.]
Now I have already downloaded it [via Firefox on Galaxy S4, renamed as instructed & put on SD]
I JUST HAVE NOT installed/ ran it yet on the Wildfire S as I'm unsure if it's safe to do so OR even if I SHOULD mess around further with the handset/ WORKING Recovery [esp. as the file states UNOFFICIAL CwM]!
Any thoughts on this, as I'm running out of options for solutions?
Thanks.

Aaaah NEARLY!!!!!!!
Found this thread:
Htc wildfire s Stock rom by member gabontz_vl
It advised to go to follow this link:
androidforums.com/wildfire-s-...ed-device.html
So I did this and I followed it's advice and got the Wizard working:
HAD TO ***Relocked*** my Bootloader gurrrr! Will have to unlock again when I have my ROM back!
HTC Android Phone ROM Update Utility 1.0.5.2011
Current information about your Android phone:
Image version:
19.26.401.3
<Click update>
From 19.26.401.3
to
2.26.401.3
Phone restarts; "HTC" appears on black screen
Wizard says the process will take 10 mins to update
BUT after NEARLY working, it failed saying:
ERROR [140]: BOOTLOADER VERSION ERROR
The ROM Update cannot update your Android phone.
Please get correct ROM Update Utility and try again.
Note the wizard matched my ROM & Radio perfectly.
Have not messed with HBOOT. It's still the original 1.09.0099.
Where do I go from here?
Thanks

GERJDOY said:
Aaaah NEARLY!!!!!!!
Found this thread:
Htc wildfire s Stock rom by member gabontz_vl
It advised to go to follow this link:
androidforums.com/wildfire-s-...ed-device.html
So I did this and I followed it's advice and got the Wizard working:
HAD TO ***Relocked*** my Bootloader gurrrr! Will have to unlock again when I have my ROM back!
HTC Android Phone ROM Update Utility 1.0.5.2011
Current information about your Android phone:
Image version:
19.26.401.3
<Click update>
From 19.26.401.3
to
2.26.401.3
Phone restarts; "HTC" appears on black screen
Wizard says the process will take 10 mins to update
BUT after NEARLY working, it failed saying:
ERROR [140]: BOOTLOADER VERSION ERROR
The ROM Update cannot update your Android phone.
Please get correct ROM Update Utility and try again.
Note the wizard matched my ROM & Radio perfectly.
Have not messed with HBOOT. It's still the original 1.09.0099.
Where do I go from here?
Thanks
Click to expand...
Click to collapse
Try using a zip extracted from an RUU
1. First download and run an RUU on your computer(the latest one you can find)
2. After the first window pops up, close it
3. Then in "Run" type "%temp%"
4. In there find a file named "ROM.zip"
5. Rename it to "PG76IMG.zip"
6. Put it on the root of the SDcard(no folders)
7. Now boot into the bootloader
8. It will check and ask you to flash the file, press the Vol up button
9. And you'll get a completely stock rom
Do make sure that your bootloader is Relocked when you do this, you can unlock it using the same unlock code

csoulr666 said:
Try using a zip extracted from an RUU
1. First download and run an RUU on your computer(the latest one you can find)
2. After the first window pops up, close it
3. Then in "Run" type "%temp%"
4. In there find a file named "ROM.zip"
5. Rename it to "PG76IMG.zip"
6. Put it on the root of the SDcard(no folders)
7. Now boot into the bootloader
8. It will check and ask you to flash the file, press the Vol up button
9. And you'll get a completely stock rom
Do make sure that your bootloader is Relocked when you do this, you can unlock it using the same unlock code
Click to expand...
Click to collapse
I've just spotted the reply, thank you for the advice csoulr666.
Yes I will do this now & let you know how I get on.
Again, thanks.

Thanks again to csoulr666.
Followed the instructions to the letter.
After powering on in HBOOT, the handset automatically began "checking...PG76IMG.zip". A load-bar appeared at the top-righthand corner of the screen. When checking completed, I got:
Main Version is older!
Update fail!
Press <power> to reboot.
Now, I extracted from RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe-
as the stats for my software were ROM: 2.26.401.3 & Radio 7.57.39.10M.
A perfect match. So what is this "Main Version is older" referring to?
I am a little confused.
Thanks.

GERJDOY said:
Thanks again to csoulr666.
Followed the instructions to the letter.
After powering on in HBOOT, the handset automatically began "checking...PG76IMG.zip". A load-bar appeared at the top-righthand corner of the screen. When checking completed, I got:
Main Version is older!
Update fail!
Press <power> to reboot.
Now, I extracted from RUU_Marvel_S_HTC_Europe_2.26.401.3_Radio_47.23e.35.3038H_7.57.39.10M_release_261695_signed.exe-
as the stats for my software were ROM: 2.26.401.3 & Radio 7.57.39.10M.
A perfect match. So what is this "Main Version is older" referring to?
I am a little confused.
Thanks.
Click to expand...
Click to collapse
Try using one that is newer than your current version

Thank you to csoulr666 for the advice. I apologise for the delay in responding (as I saw this at 9am). I have spent the day (& most of last night ) on Google, reading umpteen threads-
"googling": ERROR [140]: BOOTLOADER VERSION ERROR/ The ROM Update cannot update your Android phone/ Main Version is older/ ruu could not update my rom version/ latest stock rom for wildfire s/ htc wildfire s newest update/ original stock rom for htc wildfire s/ stock roms for wildfire s/ HTC Wildfire S Software newer than 2.26.401.3/ update from 2.26.401.3/ update android 2.3 6/ download android 2.3 6 for htc wildfire s.
The latest RUU IS 2.26.401.3. That is the one I am using, both as RUU, & to extract the ROM to .zip. I can not find ANY NEWER RUU.
I am unclear as to what "Try using one that is newer than your current version" referrs to, sorry; so I could only reason that it must be the Android version.
As the RUU is the latest- 2.26, it should surely contain ver:2.3.5. If it's not, which the error messge implies it's not?, I'm not sure how to check the Android version contained within nor how to replace it as I can not find a seperate 2.3.5 file. I can not find an Android 2.3.5 file download, nor how to update an RUU in .exe form or an independant ROM .zip ripped from it, .
I am now really stuck & fresh out of ideas.
Thanks

GERJDOY said:
Thank you to csoulr666 for the advice. I apologise for the delay in responding (as I saw this at 9am). I have spent the day (& most of last night ) on Google, reading umpteen threads-
"googling": ERROR [140]: BOOTLOADER VERSION ERROR/ The ROM Update cannot update your Android phone/ Main Version is older/ ruu could not update my rom version/ latest stock rom for wildfire s/ htc wildfire s newest update/ original stock rom for htc wildfire s/ stock roms for wildfire s/ HTC Wildfire S Software newer than 2.26.401.3/ update from 2.26.401.3/ update android 2.3 6/ download android 2.3 6 for htc wildfire s.
The latest RUU IS 2.26.401.3. That is the one I am using, both as RUU, & to extract the ROM to .zip. I can not find ANY NEWER RUU.
I am unclear as to what "Try using one that is newer than your current version" referrs to, sorry; so I could only reason that it must be the Android version.
As the RUU is the latest- 2.26, it should surely contain ver:2.3.5. If it's not, which the error messge implies it's not?, I'm not sure how to check the Android version contained within nor how to replace it as I can not find a seperate 2.3.5 file. I can not find an Android 2.3.5 file download, nor how to update an RUU in .exe form or an independant ROM .zip ripped from it, .
I am now really stuck & fresh out of ideas.
Thanks
Click to expand...
Click to collapse
Did you get this sorted?
I too had the same problems as you. I am on the same HBOOT and radio and my Cid is O2__001 (UK) and all the errors you encountered were the same for me.
I got it working tonight by creating a GOLDCARD SD card (search XDA/Google for it and use Youtube to find out how to create one) and using the Rom extracted from the latest RUU 2.26.401.3.
Now im totally stock.
If you need anymore help PM me.

fgw3987 said:
Did you get this sorted?
I too had the same problems as you. I am on the same HBOOT and radio and my Cid is O2__001 (UK) and all the errors you encountered were the same for me.
I got it working tonight by creating a GOLDCARD SD card (search XDA/Google for it and use Youtube to find out how to create one) and using the Rom extracted from the latest RUU 2.26.401.3.
Now im totally stock.
If you need anymore help PM me.
Click to expand...
Click to collapse
Am having the same issue. Error 140. Can you help me pls.

ketchi_ks said:
Am having the same issue. Error 140. Can you help me pls.
Click to expand...
Click to collapse
Sorry mate, I no longer have this phone. Did u try the steps I took?
Sent from my HTC One using XDA Free mobile app

Related

Help! I'm not a noob, but I've borked my phone

Guys,
My Desire was running AuraxSense 8.0 and has been for months. It's also S-OFF so running a different bootloader. This morning, it froze up. I couldn't power it down so I took the battery out. When booting it stuck on the splash screen and went no further. Repeated, tried with SD card removed, no joy.
Couldn't get into fakeflash/clockwork recovery (or recovery at all for that matter).
When I was at work I downloaded the WWE RUU standard T-Mobile ROM but this fails with a 140 error (presumably due to the incompatible bootloader), although it seems to have wiped the phone anyway. It'll boot into the recovery menu or fastboot but nothing else.
I tried a generic WWE later ROM but this fails with error 130 - customer ID (presumably becauase it's not a T-Mob ROM).
I wiped the SD and put a fresh copy of fakeflash update.zip on the root - now when I try to boot into the clockwork mod conosle I get @failed to open /sdcard/d[date.zip (no such file or directory) and e:signature verification failed.
Have tried a factory reset and no joy either.
I can't recreate a goldcard I get the following error:
Rics-MacBook-Pro:~ Ric$ adb devices
List of devices attached
HT044PL01063 recovery
Rics-MacBook-Pro:~ Ric$ adb shell cat /sys/class/mmc_host/mmc1/mmc1:*/cid
- exec '/system/bin/sh' failed: No such file or directory (2) -
Running unrevoked gives me "-exec /system/bin/sh failed: no such file or directory".
I'm stumped as to what to do now. Please can someone help me?
Ric
How long have you had the Desire for? If it is an AMOLED screen you can follow this guide:
http://forum.xda-developers.com/showthread.php?t=768256
But when you donwload the downgrade tool, replace the PB99IMG file in it with the one from a T-Mobile RUU before you run the tool. It should then allow you to downgrade to an earlier T-Mobile stock ROM
EddyOS said:
How long have you had the Desire for? If it is an AMOLED screen you can follow this guide:
http://forum.xda-developers.com/showthread.php?t=768256
But when you donwload the downgrade tool, replace the PB99IMG file in it with the one from a T-Mobile RUU before you run the tool. It should then allow you to downgrade to an earlier T-Mobile stock ROM
Click to expand...
Click to collapse
It's AMOLED. However, I can't downgrade without a goldcard, I don't think? And I can't generate one of them...phone doesn't boot into Android either...!
The downgrade tool is to go back to a stock WWE ROM. If you replace the PB99IMG file in the downgrade tool with your T-Mobile one from 1.21.110.4 then you won't need a gold card as it'll work
EddyOS said:
The downgrade tool is to go back to a stock WWE ROM. If you replace the PB99IMG file in the downgrade tool with your T-Mobile one from 1.21.110.4 then you won't need a gold card as it'll work
Click to expand...
Click to collapse
Great, trying it now. Thanks!
landwomble said:
Great, trying it now. Thanks!
Click to expand...
Click to collapse
Just checked the HBOOT on the T-Mobile 1.21.110.4 RUU and it's 0.80
I don't think it'll be an issue but thought I'd mention it
EddyOS said:
Just checked the HBOOT on the T-Mobile 1.21.110.4 RUU and it's 0.80
I don't think it'll be an issue but thought I'd mention it
Click to expand...
Click to collapse
Thanks. Dumb question probably, but how do I extract the PB99IMG file from the .exe RUU image?
Read a post which suggested taking the downloaded RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed.exe file, renaming it to pb99img.zip and placing in the downgrade folder.
I've done this and sudo ./downgrade.sh with phone in recovery and detected by ADB devices, but the script stops at "Checking for device...waitign for device. Ensure USB debugging is enabled".
I can't boot the phone into android to turn usb debugging on...Help!
To get the PB99IMG out of an RUU...
1. Start the RUU
2. Once the first screen comes up for the RUU, move it down to the bottom of your screen as otherwise it stays on top of new windows
3. Once moved, go to Start>Run and type
%temp%
And click on OK
4. Go to the newest folder in that temp folder
5. Copy the file called Rom to your Desktop
6. Close the RUU updater and all other open windows
7. Rename the Rom file to PB99IMG
EddyOS said:
To get the PB99IMG out of an RUU...
1. Start the RUU
2. Once the first screen comes up for the RUU, move it down to the bottom of your screen as otherwise it stays on top of new windows
3. Once moved, go to Start>Run and type
%temp%
And click on OK
4. Go to the newest folder in that temp folder
5. Copy the file called Rom to your Desktop
6. Close the RUU updater and all other open windows
7. Rename the Rom file to PB99IMG
Click to expand...
Click to collapse
OK, got that.
But still hangs on "checking for device" when I run the downgrade script, and I can't turn USB debugging on as the phone won't boot..help! Really appreciate this, by the way.
EDIT: wooo, hang on. May have sorted it. Downloaded the original kousch fake flash, renamed to update.zip, booted to recovery, managed to get into recovery console and launch clockwork mod, now installing custom rooted ROM. Fingers crossed.

[Q] Have I bricked my Desire? - Solved

Hey Guys,
I've had my HTC Desire for over a year, and I've finally managed to break it (or so I think)
A few months back I rooted my phone and since they I've been installing various ROMs.
I recently purchased an app on the store that requires 2.2 and hasn't been updated for 2.3, and as I was running Gingerbread I was looking for a ROM that would downgrade my device back to 2.2.
I downloaded and installed an official ROM for 2.2 and immediately installed an OTA update, since then my phone has bootlooped. I've tried to install other ROMs through recovery but I either come up with a 'signature failed' error or a '(status 2)' error.
I'm guessing I'll need to install ClockworkMod again, but I have no idea how to, and after searching for tutorials how to do it manually, I'm having trouble understanding them.
Running HBOOT 0.93
The phone isn't branded by any company.
If there's anything else you need to know please ask and I will provide the information ASAP
Any help will be greatly appreciated.
Sorry if this is the wrong forum to post this, also.
EDIT!
An error message appears when I enter recovery displaying
"E:Can't open /cache/recovery/command"
KanzenIgiari said:
Hey Guys,
I've had my HTC Desire for over a year, and I've finally managed to break it (or so I think)
A few months back I rooted my phone and since they I've been installing various ROMs.
I recently purchased an app on the store that requires 2.2 and hasn't been updated for 2.3, and as I was running Gingerbread I was looking for a ROM that would downgrade my device back to 2.2.
I downloaded and installed an official ROM for 2.2 and immediately installed an OTA update, since then my phone has bootlooped. I've tried to install other ROMs through recovery but I either come up with a 'signature failed' error or a '(status 2)' error.
I'm guessing I'll need to install ClockworkMod again, but I have no idea how to, and after searching for tutorials how to do it manually, I'm having trouble understanding them.
Running HBOOT 0.93
The phone isn't branded by any company.
If there's anything else you need to know please ask and I will provide the information ASAP
Any help will be greatly appreciated.
Sorry if this is the wrong forum to post this, also.
Click to expand...
Click to collapse
I guess you cannot access rom/clockworkmod recovery?
My only idea is a hard factory reset (you will loose all data with this operation):
1.) Boot phone into hboot (start it with pressed volume down and power button)
2.) Navigate with volume buttons to "CLEAR STORAGE"
3.) Enter with power button
MatDrOiD said:
I guess you cannot access rom/clockworkmod recovery?
My only idea is a hard factory reset (you will loose all data with this operation):
1.) Boot phone into hboot (start it with pressed volume down and power button)
2.) Navigate with volume buttons to "CLEAR STORAGE"
3.) Enter with power button
Click to expand...
Click to collapse
I can access recovery, it takes me to a screen with a picture of a phone with a red triangle and an exclamationmark in the middle.
I press +Vol and Power and it gives me these options
Reboot system now
Apply sdcard:update.zip
Wipe data/factory reset
Wipe cache partition
I tried the 'ClearStorage' method and I'm having no luck with that.
I'm guessing I'm looking for an official unmodded ROM. However that might not be the case. :/
KanzenIgiari said:
I can access recovery, it takes me to a screen with a picture of a phone with a red triangle and an exclamationmark in the middle.
I press +Vol and Power and it gives me these options
Reboot system now
Apply sdcard:update.zip
Wipe data/factory reset
Wipe cache partition
I tried the 'ClearStorage' method and I'm having no luck with that.
I'm guessing I'm looking for an official unmodded ROM. However that might not be the case. :/
Click to expand...
Click to collapse
Download latest ruu from here:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
Rename it into "update.zip" and copy it on your sd card. Now boot into stock recovery and choose "apply sdcard:update.zip".
After this process is finished, you should have an unbraned desire running stock froyo ruu.
MatDrOiD said:
Download latest ruu from here:
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
Rename it into "update.zip" and copy it on your sd card. Now boot into stock recovery and choose "apply sdcard:update.zip".
After this process is finished, you should have an unbraned desire running stock froyo ruu.
Click to expand...
Click to collapse
I'd've replied faster but it was a pain to download.
I tried to install it and this is what I got
E:Can't open /cache/recovery/command
-- Install from sdcard...
Finding update package...
opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
Maybe I forgot to mention, my device is rooted, so it doesn't like the official ROMs.
KanzenIgiari said:
I'd've replied faster but it was a pain to download.
I tried to install it and this is what I got
E:Can't open /cache/recovery/command
-- Install from sdcard...
Finding update package...
opening update package...
Verifying update package...
E:signature verification failed
Installation aborted.
Maybe I forgot to mention, my device is rooted, so it doesn't like the official ROMs.
Click to expand...
Click to collapse
Turn off signature verification in your recovery and then try to flash again.
Swyped from my HTC Desire using XDA App
MatDrOiD said:
Turn off signature verification in your recovery and then try to flash again.
Swyped from my HTC Desire using XDA App
Click to expand...
Click to collapse
I don't have an option to do that since I'm using the stock recovery; maybe if I can install ClockworkMod somehow...
However I'm not sure how to do this since my phone wont actually boot to let me install it from the ROM Manager APK.
Download the PB99IMG.zip file of your ruu and flash it from hboot.
Exiled_SouL said:
Download the PB99IMG.zip file of your ruu and flash it from hboot.
Click to expand...
Click to collapse
This is where my n00b skillz activate, where can I find the PB99IMG.zip file?
KanzenIgiari said:
This is where my n00b skillz activate, where can I find the PB99IMG.zip file?
Click to expand...
Click to collapse
http://shipped-roms.com/index.php?category=android&model=Bravo
Exiled_SouL said:
http://shipped-roms.com
Click to expand...
Click to collapse
Okay, there's a list. What exactly am I looking for?
How do I know which is the right file for me?
Download the one according to your software and baseband version number and after download check the md5 value also.
Exiled_SouL said:
Download the one according to your software and baseband version number and after download check the md5 value also.
Click to expand...
Click to collapse
I'm totally confused now.
Wher do I find my SoftWare and BaseBand version number?
KanzenIgiari said:
I'm totally confused now.
Wher do I find my SoftWare and BaseBand version number?
Click to expand...
Click to collapse
it's in your device settings/about phone,anyway since your device is not branded try this 1
OTA_Bravo_Froyo_HTC_WWE_2.29.405.2-2.10.405.2_R_P_release8gn61bgo3rswcw24.zip it's the second file on that list after download the file rename It to PB99IMG
Exiled_SouL said:
it's in your device settings/about phone,anyway since your device is not branded try this 1
OTA_Bravo_Froyo_HTC_WWE_2.29.405.2-2.10.405.2_R_P_release8gn61bgo3rswcw24.zip it's the second file on that list after download the file rename It to PB99IMG
Click to expand...
Click to collapse
A complete ruu is needed, not only the ota. So download my linked ruu, rename it into PB99IMG.zip, copy it to the root of your sd card (so not in any folder), boot your phone into hboot and run the flash operation.
MatDrOiD said:
A complete ruu is needed, not only the ota. So download my linked ruu, rename it into PB99IMG.zip, copy it to the root of your sd card (so not in any folder), boot your phone into hboot and run the flash operation.
Click to expand...
Click to collapse
Okay, I'm trying that now...
MatDrOiD said:
A complete ruu is needed, not only the ota. So download my linked ruu, rename it into PB99IMG.zip, copy it to the root of your sd card (so not in any folder), boot your phone into hboot and run the flash operation.
Click to expand...
Click to collapse
Thanks for clearing that out but the link you provided it's a RUU.exe which can only be flashed from PC to flash the ruu from hboot you need zip version of that ruu.i am saying this cause when i was flashed ruu from hbbot renaming the ruu.exe didn't work for me i had to download to zip file from the shipped-roms.com
Exiled_SouL said:
Thanks for clearing that out but the link you provided it's a RUU.exe which can only be flashed from PC to flash the ruu from hboot you need zip version of that ruu.i am saying this cause when i was flashed ruu from hbbot renaming the ruu.exe didn't work for me i had to download to zip file from the shipped-roms.com
Click to expand...
Click to collapse
Okay didn't know that. Thanks.
Swyped from my HTC Desire using XDA App
Sorry for the wait in reply.
Okay, I did that with the PB99IMG.zip file and I'm still having no luck, maybe there's another step after that what I've missed out?
I placed the PB99IMG file to the root of the SD and the HBOOT loaded it, what am I supposed to do next?
I tried rebooting the phone after this, and I still get the same loop.
The HTC screen shows, then it seems to restart (probably because there's nothing on the device for it to load)
EDIT
I tried both ZIPs that I was linked to
My last idea is to try this way:
1.) Create goldcard with linux:
http://www.nazriawang.com/2010/04/how-to-create-goldcard-with-ubuntu.html?m=1
2.) Rename my linked ruu in "update.zip" after downloading (in case you don't have it any more)
3.) Copy this file on the goldcard
4.) Insert goldcard in your phone, go to recovery and apply the update.zip on your sd card
Maybe the goldcard can avoid the signature verification failure.
Swyped from my HTC Desire using XDA App

flash stock rom after s-off & hoot without usb

Hi,
on my desire I'm running Cyanogen Mod 7.10 with it's dedicated hboot partition table and hboot 0.93.1000.
So far everything went fine but yesterday the usb port screwed up. So I'm not able to charge the phone anymore nor establish a usb connection.
To send it back to htc I'd like to flash a stock t-mobile rom and remove the s-off and all the other thinks which might be suspicious.
As far as I read and understood, I need to
1. flash the Bravo Downgrader from Alpharev to recovery the original partition table. To do so I put this file on the sd card, named it PB99IMG.zip and pressed vol down and power. Then it tells me that the cid is incorrect?
- does anyone know why?
2. if this was successful I should install a stock rom. I downloaded RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.0 6.00.02_2_release_127570_signed.exe
which should be for entire Europe hopefully. But this is an exe file and if I extract it there's only a cab file which shows up and I don't know which one I am supposed to transform to a zip file. Or isn't this possible at all?
hope someone can bring light into my darkness of not getting it right.
greetz
macx
I don't know too much about this, as I am trying to stumble my way though it myself without bricking my HTC Desire. However, i do know that inside the CAB file you mention, there is a file called rom.zip. This file contains all the images you require to flash your device.
So after opening up the exe file (I refer to RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865.exe which is what I am using) you get a folder (RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865). Inside this there is yet again another folder (Disk1). Inside this folder exists Data1.cab (archive) and inside Data1.cab (I used ScanZip to open it) there is rom.zip.
Check these links for more detailed instructions:
http://forum.xda-developers.com/showthread.php?t=575448 (looks slick)
http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
Like I said, I've very little idea about this and I'm still reading up, but I figured this information may help you. Best of luck, HTH.
The instructions from here worked flawlessly.
androidforums (DOT) com (FS) htc-desire (FS) 177907-froyo-2-09-405-8-update-windows-not-required (DOT) html
change (DOT) and (FS) to . and / respectively. I'm not allowed to post this many URLS incase I'm spamming. I followed this, and in 5 minutes I had my phone as it was when HTC sold me it.
Make sure you have a good amount of battery. Best of luck.
Here is "How to Extract the ROM from an RUU".
thanks for your replies. At the moment the battery is to weak to give it a try again.
But I'll follow these steps as soon as I found someone who can charge my battery in his phone. ^^
Greetz
macx
Hi again,
I got my battery charged now and was able to extract the rom.zip from the original ruu.
For those who are interested in how I did it. I simply started the ruu***.exe and search my profile folder for a rom.zip.
So far so good.
Then I rename it to PB99IMG.zip and start the bootloader by pressing vol down and power. It finds the zip file and starts loading it.
Then I get the message "Main version is older! Update fail!"
I'm stuck here, because I don't know what exactly this means. What is the main version? and what else can I try to get back to the factory defaults?
edit:
the first time I tried flashing RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed
it loaded the zip file, then rebooted did the same loading procedure again and then the ""Main version is older! Update fail!" message came up.
If I try it again with now with the same file there is no reboot but the error messages pops up directly. And I realised
that I've got a new bootloader.
now it says:
Bravo PVT1 SHIP S-ON
HBOOT-0.80.0000
MICROP-031d
TOUCH PANEL-SYNT0101
RADIO-5.11.05.27
Mar 29 2010, 21:34:33
For me it looks like it flashed the other HBOOT but didn't flash the rom.
Do you guys have an idea?
Greetz
Macx
ok,
i keep on trying.
I also tried to flash RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00.32U_5.11.05.27_release_159811_signed.exe
first it didn't work because of CID incorrect error message.
After creating a goldcard and trying it again it worked and flashed the rom.
Now my phone runs this version just fine and I gave it a try again to flash the original T-Mobile. This is the lastest version available in the xda Wiki.
Same error again.
Main version is older! Update fail!
What I still do not understand, is what exactly is meant by main version. I got this
error even when there was no rom installed at all. So could it be possible that the rom version is meant by this message?
Even if so, do you know where I can get a T-Mobile version which is newer then the one I tried a million times?
Help is really really appreciated
Greetz
macx

[Q] Help - stuck at HBOOT/Recovery and can't run RUU on HTC Desire

Hi guys, wonder if you can help me. I have a HTC Desire (GSM) and rooted it, removed UK O2 branding and putting Froyo (2.2) on it and a new radio and Clockwork Mod Recovery. I messed around - thought I’d bricked it following a dodgy flash, as couldn't boot, get into recovery or anything, with the phone looping at the HTC logo and powering on until I took the battery out.
Thought I’d look at it today and made progress, but still can’t get a RUU to install on it. I can get into Recovery menu via bootloader and I think the SDcard is a goldcard. Issues I have are:
• I can’t flash a RUU onto the phone from running the file through Windows, as I constantly get an Error 170 USB Connection error. I’ve tried reinstalling HTC Sync, trying different versions, tried a different USB cable and port. I’ve tried running HTC Sync as Admin, and in compatibility mode under XP SP 2 and updated the driver in Control Panel and it displays as “My HTC”, nothing works. I am running Windows 7 64 Bit.
• I tried putting the RUU onto the phone as a PB99IMG.zip file and running it through Recovery, but I get a message saying “bad file”
• As soon as I put a file onto the SD card, Ext3 then won’t mount with an error message and I have to repartition the SD card in Windows (Using Mini-tool Partition Wizard). The error I get is "can't mount /dev/block/mmcblk0p2 (File exists) error mounting /sd-ext/!” I can fix it, but soon after it is fixed it reverts back to error it I add any files to root of the SD card to run through Recovery.
I just want to get the phone back working, whether it is branded or unbranded, and whatever RUU I can get working on it. Can anyone advise the steps I can take from here please?
My stats/versions are:
HBoot 0.93.0001
Radio 5.09.00.08
ClockworkMod Recovery v2.5.0.7
S=On
Thanks,
Stewart
Tried downloading the RUU again? I recommend to check md5sum afterwards.
Sent from Sandvold's ICS using Transparent XDA App
Thanks MatDroid, I've managed to get past the 171 error and now getting a 131 error, saying it is the incorrect ROM. Is there somewhere I can get confirmation of the correct ROM for my device and check MD5sum before loading?
I would look at putting on another recovery, something like 4ext touch. Google it, your current clockwork recovery is pretty dated. Look at a program called android flasher, and you will be able to flash a new recovery through that.
Once you get the new recovery working, there is an option to toggle USB storage in which you can put your custom from on the SD card. Once the custom from is on your SD card, flash it through recovery. Hopefully it should work
Sent from my HTC Desire using XDA App
you should really look at my guide, you don't flash RUU zip files through recovery.
just realised you are s- on so android flasher won't work. Therefore until you s-off your phone, as mattdroid said you may have a bad download for the ruu. Try downloading ruu again nd running the exe file
Sent from my HTC Desire using XDA App
bortak said:
you should really look at my guide, you don't flash RUU zip files through recovery.[/QUOTE
Yeah just realised that too sorry for the wrong information. he is only wanting a ruu which of course is not done through recovery with the exe file. Custom rom is a different story.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Thanks guys I've figured it out and have now succesfully got the phone working.
Issues were:
I was trying to flash the wrong RUU (a 2.09 instead of 2.10) so when flashing it was rejecting as a lower version. Using the right RUU worked
My SDcard wasn't a goldcard - I thought it was but apparently not. I re-created the goldcard and it worked
I was trying to flash from the wrong place - instead of through FastBoot USB I was going into Clockwork Mod and loading files, mucking around with the mountings and things like that
All great now, so thanks again.
Stewart

Help Flashing RUU - Error 170

Hi,
Wonder if anyone can give me some tips. I'm trying to put my HTC Desire back to stock via the RUU, but can't seem to establish a connection with the phone and its current ROM.
Currently:
AlphaRev
Bravo PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17-05.23
Aug 10 2010 17:52:18
ROM: Cyanogen 7
Android Ver: 2.3.7
BB: 32.56.00.32U_5.17.05.23
Mod Ver: CyanogenMod-7.1.0-Desire
I've tried the following:
Installing HTC Sync, Removing just HTC Sync, Trying to connect phone to both Windows 8 and Windows 7 environments and running RUU. Result was Error 170
Installing PdaNet, Installing HTC Drivers from there, generated an error code in Windows 8. Ran on Windows 7 VM, but RUU still errored with Error 170
Installing Android SDK and Google USB Drivers, running RUU and still getting error 170
Tried running it with the phone in debug mode, but get an "Android Device?" in Device Manager that i can't get to work.
Have tried using unrevoked drivers, and RUU still errors with Error 170.
Have tried with 2 different cables, 1 of which works fine with another phone.
Does anyone have any other tips to return my phone to stock?
ShadowedAnarchy said:
Hi,
Wonder if anyone can give me some tips. I'm trying to put my HTC Desire back to stock via the RUU, but can't seem to establish a connection with the phone and its current ROM.
Currently:
AlphaRev
Bravo PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYNT0101
RADIO-5.17-05.23
Aug 10 2010 17:52:18
ROM: Cyanogen 7
Android Ver: 2.3.7
BB: 32.56.00.32U_5.17.05.23
Mod Ver: CyanogenMod-7.1.0-Desire
I've tried the following:
Installing HTC Sync, Removing just HTC Sync, Trying to connect phone to both Windows 8 and Windows 7 environments and running RUU. Result was Error 170
Installing PdaNet, Installing HTC Drivers from there, generated an error code in Windows 8. Ran on Windows 7 VM, but RUU still errored with Error 170
Installing Android SDK and Google USB Drivers, running RUU and still getting error 170
Tried running it with the phone in debug mode, but get an "Android Device?" in Device Manager that i can't get to work.
Have tried using unrevoked drivers, and RUU still errors with Error 170.
Have tried with 2 different cables, 1 of which works fine with another phone.
Does anyone have any other tips to return my phone to stock?
Click to expand...
Click to collapse
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Worked great, thank you so much! Thank given
Glad I helped
Sent from my toaster
Just so u know even tho uv sorted it, u need htc sync installed aswell to run a ruu
Sent from my non - JB HTC Desire
I got as far as booting in HBOOT and it said (after fully loading) "Error: Main is older".
I'm running "R2 ZM4.5" Redux.
I want to install the stock rom so that I can upgrade the HBOOT, so that I can S-OFF, so that I can somehow eventually repartition. (It's getting pretty confusing in my head about now).
Any advice for me?
Worked Great!
abaaaabbbb63 said:
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Click to expand...
Click to collapse
Worked great! Thanks a lot
Can anyone point me in the direction of the latest RUU? The HTC Dev site is down, and I cannot see it on the list of ROMS in the android dev forum..
Thanks in advance.
marky9074 said:
Can anyone point me in the direction of the latest RUU? The HTC Dev site is down, and I cannot see it on the list of ROMS in the android dev forum..
Thanks in advance.
Click to expand...
Click to collapse
if ur looking for the 2.3gb upgrade from HTCDev then u can download it from bortaks guide in my sig, go down to resources and its there. also google shipped roms htc desire bravo (if u have bravo)
jmcclue said:
if ur looking for the 2.3gb upgrade from HTCDev then u can download it from bortaks guide in my sig, go down to resources and its there. also google shipped roms htc desire bravo (if u have bravo)
Click to expand...
Click to collapse
Thanks for that! I was on shipped roms earlier, but was looking under desire instead of bravo! Cheers
abaaaabbbb63 said:
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Click to expand...
Click to collapse
I don't get the "Boot in Hboot >> Select Yes" thingy....now I'm stuck at there...I placed it into my SD card already. and I enter the bootloader, then to recovery. Nothing happens....anyone help?? T.T
pozer0118 said:
I don't get the "Boot in Hboot >> Select Yes" thingy....now I'm stuck at there...I placed it into my SD card already. and I enter the bootloader, then to recovery. Nothing happens....anyone help?? T.T
Click to expand...
Click to collapse
Follow the steps here:
http://forum.xda-developers.com/showpost.php?p=45298337&postcount=21
abaaaabbbb63 said:
Follow the steps here:
http://forum.xda-developers.com/showpost.php?p=45298337&postcount=21
Click to expand...
Click to collapse
I think I've found the problem....my phone has PG58 instead of PG99...after I've renamed it, it works. Thanks a lot for your kind reply. Appreciate it. Now that I've already formatted my custom ROM with this stock ROM, my device does not have recovery any more, is that right? (eg. 4EXT and etc). Can you please tell me how to get those back, just in case I wanna return to using Custom Rom?
pozer0118 said:
I think I've found the problem....my phone has PG58 instead of PG99...after I've renamed it, it works. Thanks a lot for your kind reply. Appreciate it. Now that I've already formatted my custom ROM with this stock ROM, my device does not have recovery any more, is that right? (eg. 4EXT and etc). Can you please tell me how to get those back, just in case I wanna return to using Custom Rom?
Click to expand...
Click to collapse
Wait wait wait wait.
If you have a Sensation, do not use the zips above!!
Use a Sensation RUU, and, instead of renaming the zip PB99IMG.zip, rename it PG58IMG.zip.
abaaaabbbb63 said:
Wait wait wait wait.
If you have a Sensation, do not use the zips above!!
Use a Sensation RUU, and, instead of renaming the zip PB99IMG.zip, rename it PG58IMG.zip.
Click to expand...
Click to collapse
ya...i just needed a guide...the RUU is Sensation one. I downloaded it from other site...thx for the help, fellow!
abaaaabbbb63 said:
Thy the PB99IMG.zip method.
Download the latest RUU (the 2.3 one).
Run it as administrator.
Tick the 'I understand the caution indicated above...' box, and click next.
At this point do not go any further.
Navigate to C:\Users\"Your Name"\AppData\Local\Temp (AppData is a hidden folder)
You should see one or two folders like this:
{719CE201-7B12-4A13-9AF6-8F359FE69C7B}
Go into the one with dotnetinstaller.exe in it.
Open up the next folder.
Copy rom.zip into another folder (outside of temp).
At this point just Cancel and quit out of the ROM Update Utility.\
Rename rom.zip to PB99IMG.zip and place it on the root of your sd-card.
Boot in Hboot.
Select Yes.
?????
Profit!!
Click to expand...
Click to collapse
I have the Desire S and using Windows 8 trying to flash the 4.0 RUU from HTCDev but it keeps failing at "Waiting for Bootloader........." and then gives me the error 170/171 USB Connection error. My laptop, when the phone goes to the HTC Logo with black screen, says USB Device not recognized! What do I do? I have scoured the net and xda for answers, all of which don't work I don't have a microSD card either
ShadowedAnarchy said:
Worked great, thank you so much! Thank given
Click to expand...
Click to collapse
Can you please tell me how you did this? I need to get my phone back to factory image, boot loader is unlocked and rooted.
i) Could you please tell me where do you download the custom ROM file?
ii) How to put phone in Hboot mode?
guys im updating my htc desire 816 4.4.2 to 5 i didnt receive any update so i jst downloaded the rom from htc .com .. the file is something like "RUU SENSE 6" . that is rom of lolipop but it always shows the usb cable error ie error 171.... so please help me to update my rom!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Worked for me!
For HTC ONE M8:
Download the file: RUU_M8_UL_M60_SENSE70_ATT_MR_Cingular_US_6.20.502.5_combined.exe and run it.
Wait for extraction.
Go to C:\Users\username\AppData\Local\Temp\.
Find the files: "rom_01" and "rom_2".
(I've found them on: C:\Users\username\AppData\Local\Temp\{1BF9D767-EBE5-4470-A938-3C36AE93DF54}\{50F2F878-636A-496F-A7CB-544C067E0C4B}).
Copy the bigger file ("rom_2") to SDCARD.
Rename It to: 0P6BDIAG.zip (caution to double zip extension - 0P6BDIAG.zip.zip).
Continue the steps above.

Categories

Resources