ok this is very confusing i moved from wildfire to desire
on wildfire we used darktremor for a2sd etc with cammand
on desire im struggling to figure out how to cache2sd
im currently using this rom
[Sense2.1 GingerBread]InsertCoin CM7/A2SD+
but dont understand the thing about cm7 hboot wat does it do
and is there a terminal cammand to cache2sd????
daddyspud said:
but dont understand the thing about cm7 hboot wat does it do
Click to expand...
Click to collapse
The CM7 HBOOT will shuffle around your NAND to 130Mbs System 5Mbs Cache 302Mbs Data, stock it's 250mbs System 40Mbs Cache and 147Mbs Data.
Basically you get 302Mbs of internal app space where as using a stock Sense ROM you get 147Mbs. You'll need AlphaRev's S-OFF to perform it though.
If your installed ROM uses Darktremors a2sd script you have to type
Code:
su
a2sd cachesd
in terminal (like connectbot) on device.
From PC its
Code:
adb shell
a2sd cachesd
Try!
yh i tryed the rom does not use darktremor im know how to wen usin darktremor
Related
Miui XJ a2sd 1.7.x was the first Miui i flashed on my desire, I tried activating the a2sd with the zipalign and cachesd commands but it didn't work.
Searching the internet for a fix i read that it's a common problem and flashing the darktremor a2sd script should fix the problem.
I searched everywhere but i couldn't find the script to download.
I then decided to flash the d2ext, but it was really slow, and i had some issues with deleting files.
In the end i gave up and returned to froyo.
Once again i flashed the Miui xj a2sd 1.8.12 in the hope that things will run different this time, but i ran out of memory very fast, my phone shows that i have only 20 MB of internal memory left, and the a2sd has like 450 MB.
I can't install anymore apps without seeing the low memory sign, so is there anyway to fix this?
Sent from my HTC Desire using XDA App
Activate A2SD+ with commands from a terminal emulator
A2SD zipalign
A2SD reinstall - this did it for me.
Thanks alot for the help, that did work.
I tried the aligning first but didn't work, it said that the script didn't run on boot, so i used the reinstall command and now i have 90 MB free internal memory.
I'm going to install more apps to see if the a2sd is working, or if i have to do this everytime i run out of memory.
Nope. You can do this only once. Reinstall actived the a2sd for you - because before it was not loading properly.
Sent from my customized HTC Desire using TTP
davebugyi said:
Activate A2SD+ with commands from a terminal emulator
A2SD zipalign
A2SD reinstall - this did it for me.
Click to expand...
Click to collapse
im having the same problem as above.im trying to enter the commands but i got an "access denied" response.what is the full command?
First you must type in:
su
a2sd reinstall
Click to expand...
Click to collapse
thanks a million guys.. been searching for an answer to my low memory...this fixed it...i love miui xj rom been using it for about a week i think i will keep it for now
thanks again davebugyi
davebugyi said:
Activate A2SD+ with commands from a terminal emulator
A2SD zipalign
A2SD reinstall - this did it for me.
Click to expand...
Click to collapse
i've tried this as well but still getting insufficient space when trying to download anything larger than 1mb from market..
xcly said:
i've tried this as well but still getting insufficient space when trying to download anything larger than 1mb from market..
Click to expand...
Click to collapse
you need to flash the cm7r2 market cache fix from the MIUI thread..
I tried using this ROM and even partitoned my SD card for stock HBoot. I had the following configuration : A2SD+ STOCK HBOOT - stock hboot - the one with 250 mB for /system
- 1 gB ext4 partition
When i tried "a2sd check" or "a2sd install" or any a2sd command, it says a2sd not found. M currently using MIUI and everything works perfectly ....
Just that i wanted to try out some sense roms. Also tried flashing DarkTremor's A2SD script but then it stuck on splash screen.
Can anyone plz let me know how can i basically achieve A2SD on this ROM and run the above commands either through Terminal Emulator or through shell. A pointer to a step by step giude would be awesome[Noob alert]
TIA
maybe the rom you are trying does not support ext4? have you checked that?
btw hboot does have nothing to do with your sd card
Yes it supports ext 4
http://forum.xda-developers.com/showthread.php?t=1016940
So can any1 plz give a me solution on this?
You don't need to do any A2SD+ commands or anything as a prerequisite for Insertcoin. All you have to do is make sure you download the right ROM for your HBOOT, partition 1GB EXT4. Full wipe and flash the rom. The rom itself will take care of moving stuff to the EXT during installation.
Hope this helps in any way.
Noob question. I'm currently running Express 3.4.1. It supports a2sd but when i check my internal storage it keeps going up after every app install. I did partition my sd card and can check it many different ways. SO what gives?
You can go into a terminal program, run:
su
a2sd check
a2sd reinstall
and that will move all your apps to the SD Card
This is interesting. Version 2.7.5.2, which is older. The check indicates that apps are going to sd. But when I try to to do the reinstall I get an error, something about a2sd not running on boot.
Sent from my PC36100 using XDA App
I flashed the latest a2sd in recovery and now it seems to be working.
My final question for a while
When I load a ROM I also need flash the lasted DT s2sd too?
PinkFrosty said:
I flashed the latest a2sd in recovery and now it seems to be working.
My final question for a while
When I load a ROM I also need flash the lasted DT s2sd too?
Click to expand...
Click to collapse
Yes, you need to flash the script again for a new rom.
Even when it says it's baked into the ROM, I still flash A2SD in the same recovery session as the ROM
Once u flashed the a2sd zip file open your emulator and do the following comands
su
a2sd cachesd
Phone well reboot
Now erase the emulator and re download because it well stop working after u run the command but re download it and open it again now type the next set of commands
su
a2sd datasd
Phone well reboot
And thats it u should have all the free memory you need just make sure u have your sd partioned before doing this or it wont work
Sent from my PC36100 using Tapatalk
What all do i need to do to get dta2sd working on cm7.2 and get rid of the cm a2sd? Please include links to zips as well?
Sent from my PC36100 using Tapatalk
i hope im right, but i would assume that its thee same as with any rom... i used dt a2sd on sense and my current CIUI rom, which is a mix between CM and MIUI. here is a link
http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
flash this from the sd card in recovery.... then dl a terminal emulator and enter the following commands:
su [ENTER]
a2sd reinstall [ENTER]
you can also do the following to move cache to sd to free up more space if needed:
a2sd cachesd [ENTER]
hope this helps
dbenney said:
i hope im right, but i would assume that its thee same as with any rom... i used dt a2sd on sense and my current CIUI rom, which is a mix between CM and MIUI. here is a link
http://www.darktremor.info/files/a2sd/dtapps2sd-2.7.5.3-beta04-signed.zip
flash this from the sd card in recovery.... then dl a terminal emulator and enter the following commands:
su [ENTER]
a2sd reinstall [ENTER]
you can also do the following to move cache to sd to free up more space if needed:
a2sd cachesd [ENTER]
hope this helps
Click to expand...
Click to collapse
Well put. That'll do it.
Thanks. I figured it out, just seemed to be bootlooping because it rebooted about 8 times, but it worked out. Thanks though
Sent from my TRON-itized EVO
Hi Guys,
i want to know is there any other method for a2sd?
So, i heared that a2sd by Darktremor doesnt work on our devices
and a2sd by AMARULLZ is to unstable for me.
What r u using?
Is there any Solution for the small internal Memor for our Gaming Phone?
greets
I'm using darktremor a2sd and its been working fine for me for the longest time
Sent from my R800a using XDA App
Well.. as i used it with 8GB partition, my phone said to me after installing of 140~ Apps my internal memory is full
can you tell me, how you installed it? i think it was so:
1. Flash script through CWM
2. Boot it
3. ADB shell
4. a2sd reinstall
4.1. a2sd cachesd (alternative)
follow this guide http://forum.xda-developers.com/showthread.php?t=1158993
I have read that Darkremors A2SD will not work with GB Stock Roms (ORM).. because the init.rc has to be modified to run this script.. is it true? Or are u using it with a custom rom?
It works for me. actually it doesn't really move the whole file but unless you move to sdcard again in settings.
Sent from my R800i using XDA