Hi guys , I have a rooted defy with stock 2.51 sbf sea version . After i factory-reset my defy , i found out that i could not get pass the Set-Up Screen .The set-up screen is entirely black with the grey notification bar. The usb connect is still working and my sim card can still be detected . I tried to flash a fixed 2.51 rom in my phone but the problem still persist . Please advice and thanks in advance
wipe, flash 2.51, wipe it must be repair
Related
Dear All
i bought Motorola defy from hong kong
i am Egyptian that's why i was searching to install Arabic language and i did it with not connected letters
and i saw in some websites font will let the Arabic connected letters i copy it to the system font using super manager and i was trying to restart my phone
but since that time the phone can not restart ((((
i made rest many times but no way
anyone can help me how to solve this problem
Have you tried factory reset? Turn off the phone (pulling battery if necessary), hold the volumn down button, turn on the phone and wait for the recovery screen, then wipe and factory reset?
If that doesn't work, you may install RSDLite and flash the 2.51.1 sbf. HK version uses 2.51.0 no blur rom but it is not available. The 2.51.1 is close but with blur.
i have done rest but still not helping
and i am searching for the rom but i can not find it
there no way to restore it back like iphone you just restore the original software
thank you for your help
hello buddies... Yesterday i installed cm7 beta6 rom on my defy successfully..latr i saw red ginger theme n thought of installing that..i copied it into sd card and after that i needed to flash again but accidently i went into custom rom and clicked apdate zip file from sd card ..it took long in that i thought it has hanged and just rebooted it ...but omg it got caught in infinite boot loop..then i went into recovery mode wiped data , then went into bootloader and installed few sbf but still in boot loop ...in bootloader when i flash sbf after 100% it says manually reboot phone..what does this means.plz help me out ..
Grab the SBF for the original android version for your phone from here if you want to keep downgradability, or any old SBF if you don't mind losing downgradability, then:
Reboot into stock recovery
Turn off phone
Hold volume down and turn on phone
When the exclamation triangle/android appears press volume up and volume down together
Wipe data and cache
Boot into bootloader mode
Turn off phone
Hold volume up and turn on phone
Flash the aforementioned SBF
After that you should then be back to stock, or a stock version of the SBF you chose, from which point you can then go about rooting, installing recovery etc again.
HTH!
first of thanxs for reply nat... i did same thing ..mine pro is still it is stuck on m logo...i hv booted 3.4.2_155-Fixed.CEE_DEBLUR.. i hv flashed this and it has shown pass on rsd...after that i rebooted mobile but it is still stuck on m logo ... is this all bcoz i tried to update from mine sd card and closed phone in between of updation...can i do update from zip. sd card again
com on Quarx2k plzz look into my matter
hey Quarx2k help me out frnd ...in grt need..stock on M logo...i wish i wud hv never opted to install red ginger theme...
grewalaman said:
...i hv booted 3.4.2_155-Fixed.CEE_DEBLUR...
Click to expand...
Click to collapse
Fixed SBF....I think u should flash Full SBF
which is the best sbf if hv cm7 beta6 version.. can i contact motorola service centre to get this problem solved...
Yes, sorry I should have made that clear. From where it sounds as though your phone is at the moment, you will need to flash a full SBF as ifu said. Again, remember to use the SBF version that coincides with your original phone firmware if you want to keep downgradability.
grewalaman said:
which is the best sbf if hv cm7 beta6 version.. can i contact motorola service centre to get this problem solved...
Click to expand...
Click to collapse
3.4.2-177 nordic Blurlesshttp://forum.xda-developers.com/showthread.php?t=1037076
Sent from my MB525 using XDA App
omg after 2 days hard work i m able to get out of this boot loop stuff...i m soo glad that i met soo sweet n helping frnds here on this forum..appreciative buddies...
Mine conclusion of getting out of boot loop stuff is simply to flash full sbf like 3.4.2-177 nordic Blurless ..all problems end with this only ...Now again im on CM7 beauty...
Glad you got it working
Hi Guys
Am New Here
And I Only Got My Defy For A Weak
Tried To Get MIUI For It And Now
I Cant Use It At All
Here Is Whats Happening To Me
When Powering Up The Phone I Got Stuck On M Logo
And I Cant Access The Recovery Menu , so i can wipe data or any thing
The Bettery isnt A Problem Because i Have 2 betterys
and luckely i have 2 other defy phones at work
so when the bettery is down i only put the batter in another device and charge it
any way
i tried flashing several stock roms didnt work insted it gives me a white led when usb is connected and no m logo by then
i was using the UK Retail 4.5.1_128
please help guys
Go to stock recovery and full wipe the data/cache before attempting to flash another sbf or rom.
i cant go to any recovery menu , i pressed vol down + power for like 2 mints and nothing happens i only can go to bootloader
Try to flash with original SBF, which was installed when you buy the phone and also try RSD version 5.3.1 with driver 5.2
gona try that when i get back from work today , just one thing how would i know wich version was on it we have another moto defy here at work with red lense , is there a posbility it wil be the same ? i checked the phone and it found that its the same from the inside when i got mine
Try to find that which SBF is supports in your region, then try. As i already get stuck in this situation earlier and i use SBF which supports in our region then it gets resolved.
wich one support jordan country ?
i think i need this sbf but i cant find it
here is the details
Build Number : JRDNEM_u3_2.54.0
System Version , Moto_version_2.54.0mb525,retail.en.ME2
GAS_ASIA_USAJORDANRTARAB_P022
but i cant find it :S please help
Version which u r specify is relates to eclair (2.1) and going back to eclair is difficult. Now in my opinion u can try this SBF http://forum.xda-developers.com/showthread.php?t=1093352, if this not work then u have to go to moto service centre (without telling truth) and repair from them.
isnt there another way than sending it to the company :S all sbf failed
so no other way ?????
if all you can get in, is bootloader
try figuring out what your last android version was (2.1 2.2 2.3)
or better what version your cg39 is. (3? 4?)
from there flash the appropriate sbf file
the one with the same cg39 version as previous os.
from there, go where you want...
(c)ollen said:
if all you can get in, is bootloader
try figuring out what your last android version was (2.1 2.2 2.3)
or better what version your cg39 is. (3? 4?)
from there flash the appropriate sbf file
the one with the same cg39 version as previous os.
from there, go where you want...
Click to expand...
Click to collapse
but i cant find the one that was on the device ? i searched every where XS
read this forum http://forum.xda-developers.com/showthread.php?t=1316254, may be it can solve your problem.
I have updated my rom to GingerBread after that i tried one update for beats but the my DHD didn't start and stuck at the white screen
i took off the battery and tried again and i got the same result afet that i tried to make factory reset and i got the same result < so i took off the SDcard and i found it not working and i couldn't format it,
What Should I do now ? Iam new to this ?
Please some one Help
is your device rooted and do you have clockworkmod?
Thanls
Thanks i downgraded my device and re-install the gingerbread and it is working fine
Thanks
Hey,
i have a defy with red lense(i don´t know if this was important). i came from froyo kernel and flashed a Defy+ O2 Blur 2.3.6 SBF, now i can´t flash all sorts! ;(
every time i tried to flash something came the massage "installing abort" ....
(make me crazy) after that i flash a froyo full sbf "3.4.2_177-005_NORDIC" but now my defy doesn´t boot, it stocks in a blackscreen. i can´t go into the bootloader or CWM ... it should stock in a blackscreen with the white phone led on(i have plugged the usb-cable to my pc, to get a request from the phone or something else).
i hope someone can help me
.... i have find out a solution ! i pull out the battery and before i push it back, i hold the volum+ button(normal way to get into the bootloader). i´ve waiting a few seconds and yeah! i got connection to RSD Lite and can flash a new SFB