My moto defy dead and can not start - Defy General

Dear All
i bought Motorola defy from hong kong
i am Egyptian that's why i was searching to install Arabic language and i did it with not connected letters
and i saw in some websites font will let the Arabic connected letters i copy it to the system font using super manager and i was trying to restart my phone
but since that time the phone can not restart ((((
i made rest many times but no way
anyone can help me how to solve this problem

Have you tried factory reset? Turn off the phone (pulling battery if necessary), hold the volumn down button, turn on the phone and wait for the recovery screen, then wipe and factory reset?
If that doesn't work, you may install RSDLite and flash the 2.51.1 sbf. HK version uses 2.51.0 no blur rom but it is not available. The 2.51.1 is close but with blur.

i have done rest but still not helping
and i am searching for the rom but i can not find it
there no way to restore it back like iphone you just restore the original software
thank you for your help

Related

Stucked On Set-Up

Hi guys , I have a rooted defy with stock 2.51 sbf sea version . After i factory-reset my defy , i found out that i could not get pass the Set-Up Screen .The set-up screen is entirely black with the grey notification bar. The usb connect is still working and my sim card can still be detected . I tried to flash a fixed 2.51 rom in my phone but the problem still persist . Please advice and thanks in advance
wipe, flash 2.51, wipe it must be repair

[Q] Need Urgent Help

Hi
SuperNoob here
i had a factory unlocked defy with 2.1
i managed to root it, but one fine evening it kept getting stuck on motorola icon
i did the factory reset/wipeout from the motorola recovery screen
after reboot the phone started, google account signs in then signs out itself, and motoblur cannot complete account setup, the red registration bar gets stuck in the end, i guess i cant create motoblur account from UAE (etisalat carrier)
how can i get my sweet moto back to normal? is there a way to flash 2.1 or even 2.2 from motorola recovery screen? how can i fix things?
PLEASE HELP ME OUT
ps. donno if this will help but this is device info i had earlier saved from rds lite
Technology: UMTS
Software Version: JRDNEM_U3_2.54.0EPU93ST2_U_03.0A.01
Flex Version: UCAJRDNEMARAB1B80AA030.0R
Bootloader Version: 0910
DRM Version: N/A
been trying to search and read more and more
i now know how to boot into bootloader which is 09.10 for my defy but while there and connecting the usb cable, drivers are loaded, and rsd lite does recognize the device. However it is not highlighting START when i point it to the stock 2.2 UAE rom i downloaded from http://forum.xda-developers.com/showthread.php?t=1122210
i donno what to do
help me polease
HOW TO BLOODY activate defy with or without motoblur account from Dubai?
since i posted i dint stop searching and reading
fount the correct stock froyo 2.2.2 and flashed with rds
the solution was so simple in the end, learnt a great deal today
PROBLEM SOLVED

[Q] Defy Stuck On M Logo No Recovery Menu

Hi Guys
Am New Here
And I Only Got My Defy For A Weak
Tried To Get MIUI For It And Now
I Cant Use It At All
Here Is Whats Happening To Me
When Powering Up The Phone I Got Stuck On M Logo
And I Cant Access The Recovery Menu , so i can wipe data or any thing
The Bettery isnt A Problem Because i Have 2 betterys
and luckely i have 2 other defy phones at work
so when the bettery is down i only put the batter in another device and charge it
any way
i tried flashing several stock roms didnt work insted it gives me a white led when usb is connected and no m logo by then
i was using the UK Retail 4.5.1_128
please help guys
Go to stock recovery and full wipe the data/cache before attempting to flash another sbf or rom.
i cant go to any recovery menu , i pressed vol down + power for like 2 mints and nothing happens i only can go to bootloader
Try to flash with original SBF, which was installed when you buy the phone and also try RSD version 5.3.1 with driver 5.2
gona try that when i get back from work today , just one thing how would i know wich version was on it we have another moto defy here at work with red lense , is there a posbility it wil be the same ? i checked the phone and it found that its the same from the inside when i got mine
Try to find that which SBF is supports in your region, then try. As i already get stuck in this situation earlier and i use SBF which supports in our region then it gets resolved.
wich one support jordan country ?
i think i need this sbf but i cant find it
here is the details
Build Number : JRDNEM_u3_2.54.0
System Version , Moto_version_2.54.0mb525,retail.en.ME2
GAS_ASIA_USAJORDANRTARAB_P022
but i cant find it :S please help
Version which u r specify is relates to eclair (2.1) and going back to eclair is difficult. Now in my opinion u can try this SBF http://forum.xda-developers.com/showthread.php?t=1093352, if this not work then u have to go to moto service centre (without telling truth) and repair from them.
isnt there another way than sending it to the company :S all sbf failed
so no other way ?????
if all you can get in, is bootloader
try figuring out what your last android version was (2.1 2.2 2.3)
or better what version your cg39 is. (3? 4?)
from there flash the appropriate sbf file
the one with the same cg39 version as previous os.
from there, go where you want...
(c)ollen said:
if all you can get in, is bootloader
try figuring out what your last android version was (2.1 2.2 2.3)
or better what version your cg39 is. (3? 4?)
from there flash the appropriate sbf file
the one with the same cg39 version as previous os.
from there, go where you want...
Click to expand...
Click to collapse
but i cant find the one that was on the device ? i searched every where XS
read this forum http://forum.xda-developers.com/showthread.php?t=1316254, may be it can solve your problem.

[Q] [!HELP!][Brick my Defy]

Hey,
i have a defy with red lense(i don´t know if this was important). i came from froyo kernel and flashed a Defy+ O2 Blur 2.3.6 SBF, now i can´t flash all sorts! ;(
every time i tried to flash something came the massage "installing abort" ....
(make me crazy) after that i flash a froyo full sbf "3.4.2_177-005_NORDIC" but now my defy doesn´t boot, it stocks in a blackscreen. i can´t go into the bootloader or CWM ... it should stock in a blackscreen with the white phone led on(i have plugged the usb-cable to my pc, to get a request from the phone or something else).
i hope someone can help me
.... i have find out a solution ! i pull out the battery and before i push it back, i hold the volum+ button(normal way to get into the bootloader). i´ve waiting a few seconds and yeah! i got connection to RSD Lite and can flash a new SFB

[Q] LG e975 won't boot, stuck on logo of LG

My new phone had been arived a few days ago, i want to install cyanogenmod 11 (kitkat) on my phone, so i installed the nightly buil.d
After that i found a big problem, the phone doesn't detect my sim card (european card), so i have flashed my phone back to stock. That is where the big problem started, the phone won't fully boot anymore. It stucks on te animated LG logo, it doesn't go further.
I tried to solve this by reboot, reflash with original LG software (not a KDZ file as in the first try), but all doesn't work.
The problem still occur.
Can anyone help me to solve this problem?
Your sincereley,
Robert1996
PM: I am sorry for my bad english, it is not the language that my parrents teached me when i grow up......
in fast boot, wipe everything and hard reset. Should solve the issue.
akahroba said:
in fast boot, wipe everything and hard reset. Should solve the issue.
Click to expand...
Click to collapse
To expand on the above answer in more detail, this type of recovery is covered in the FAQ - http://forum.xda-developers.com/showthread.php?t=2434917
13.Q: I tried custom roms, now I want to go back to stock. How do I do that?
A: Use kdz updater. HERE (http://forum.xda-developers.com/showpost.php?p=44874388&postcount=36) is how to use it. I made simple. Original thread HERE (http://forum.xda-developers.com/showthread.php?t=2010624). IMPORTANT : IF YOU GET STUCK AT LG LOGO AFTER USING KDZ UPDATER,YOU NEED TO PERFORM A HARD RESET. After this,the phone will boot.
Hope this helps
this here is very common that ppl don't wipe and hard reset their phones after flashing stock rom comming from a custom rom, even i forgot that the first couple of times :victory:

Categories

Resources