Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
aE3-ink said:
You are unable to download the official rom from htc as your phone obviously was supplied by an operater who has put their own rom on it.
You need to proceed with a Hard-SPL if you wish to change ROM.
It sounds like you have an operater ROM so it's blocking your changing of the ROM to anything non-operater.
Read the wiki section for the Diamond here , especially the section : Upgrading / cooking / flashing.
with this section that clearly explains all you need to know about applying a Hard-SPL : Diamond Hard-SPL
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
Click to expand...
Click to collapse
Thanks for your advices.
When I bought that phone seller didn't mention that this phone belongs to some operator. So is it possible to get information to witch operator it belongs (phone doesn't have any operator brands on his self, and isn't any special application or images in it).
And one more time... is it realy possible that phone belongs to operator... because like I wrote before that i can download and install earlier ROM from official web site, but problem is only with the latest ROM.
Perhaps the download doesn't work as many people had problems installing the latest rom ? It would reboot into the bootscreen & block.
Maybe they have the download until they know why it screws up (but works perfect via an internal flash).
Dunno though, as it's weird you getting the 'operater' message.
Anyway, you can get the latest official rom in here, so you'll be able to flash your device.
Here's the thread : http://forum.xda-developers.com/showthread.php?t=471699
Just flash it from the internal storage. Works fine. Extract the setup with winrar or something, then you will see 2 files - one approx 140Mb, the other one like 2Mb. Rename the big one to Diamimg.nbh and copy it to your internal storage.
* Soft Reset + Hold volume down button + back button <----
* Follow instructions on screen
vladasklp said:
Hi, tried to use search and found a lot of information about that problem, but non of them solved my problem.
So, i have HTC Diamond (P3700) (ROM: 1.93.479.3.WWE, Radio: 1.00.25.05, Protocol: 52.29.25.12H, S/N: HT841GN13099)
Tried download latest ROM version from official website (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=483), but when i wrote my S/N i got error message - Sorry, this software download is not suitable for your device.
If i'll trying to download earlier ROM version (http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2) with the same S/N I haven't any problem (of course and can install it).
Also I tried to download all ROM version from http://forum.xda-developers.com/showthread.php?t=471699, but when installing these ROM I always get an error - ERROR[294] : INVALID VENDER ID
In other thread I found link to http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem3, but when I was falling all instructions I get an error again (but now problem was with connection)
Also I wrote a letter to HTC support twice, but I didin't get any response
So maybe I can find somewhere S/N decoder to know more information about my phone (for e.gd phone was locked, or belonged to other operator?) and why I have problem when updating to the latest ROM version. Does anybody can suggest other solution to this problem?
Click to expand...
Click to collapse
Read here where it says "stops at 5% or invalid model id:
http://forum.xda-developers.com/showthread.php?t=409425
Next think about HardSPL.
1.93.479.3 if you had this rom in your device, and you tried to download from HTC Support site and get the "This is rom isnt for your device" you get this because there are NO 2.03.479.3 rom the BOLD tells you what region rom u are using. And If you download another rom and try to flash and get "invalid vendor" you MUST hard-spl your device, after that you can flash every rom you can find an example of region rom, I have put this at least 4 times now so people try o understand what i meen when speaking of region roms.
RUU_Diamond_HTC_DAN_2.03.403.2_
RUU_Diamond_HTC_SPA_2.03.412.1_
RUU_Diamond_HTC_FRA_2.03.406.2_
RUU_Diamond_HTC_GER_2.03.407.2_
RUU_Diamond_HTC_WWE-ME_1.93.456.2_
RUU_Diamond_HTC_Europe_2.03.401.2_
Thanks everyone for advices!
First i tried Kevbodian recommended method. Downloaded OliPro's NBH Util and tried rebuild NBH file, but program generates only empty file (0Kb - size), maybe it doesn't work in Windows 7 So I'm fail.
Then tried laser21 method and succeed! I downloaded Unsigned-Hard-SPL-Diamond-OliNex.zip (http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2), installed them, and made everything step by step like he wrote.
Phone works seams fine, but maybe a little bit slower , so I'm tried reinstall ROM one more time, but do that in standard way. Just downloaded _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship (http://forum.xda-developers.com/showthread.php?t=471699) and ran it. Everything was fine (installation pass 100%) but than it shows - ERROR [270] - UPDATE ERROR, phone also restarted and shows information in red/green/blue/white background.
In red space
Code:
DIAM100 MFG 64M
SPL-1.40.OliNex
MicroP-Diam (LED) v11
In green space
Code:
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Place try again
So one more time I made like laser21 recommended - and phone works again. But can I do something more that latter update i can do in standard way ?
I'm not sure what you mean by:
But can I do something more that latter update i can do in standard way ?
Click to expand...
Click to collapse
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
I did everything like you (and laser21) wrote. But now i have problem when updating ROM in standart way - downloading official ROM exe file, and ran it (like I wrote before, after 100% proceed it display error that update unsucceed)
So why now I can't update ROM in standard way, maybe is solution to fix that problem ?
Sorry for mistakes in post
Try one more time with out any changes
omaga said:
Try one more time with out any changes
Click to expand...
Click to collapse
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
vladasklp said:
Hi, tried few times with different ROM versions (RUU_Diamond_HTC_WWE-ME_2.03.456.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, RUU_Diamond_HTC_Europe_2.03.401.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship, _RUU_Diamond_HTC_WWE_2.03.405.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship). While installation goes everything seams fine, but when proceed 100% it displays same error (ERROR [270] - UPDATE ERROR).
Click to expand...
Click to collapse
error 270 has happened before. try searching. I know I am an old hag, but this may be the best help I can give:
in google search for: "error [270] - update error"
include the "" marks.
help me
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
if you have a question
love_mido said:
hi i have a big problem i have installed windows mobile update it worked good and i tried to install a plug for arabic language normaly the mobile have to reboot then i have the htc sceen forever i tried to reset with all way volume down botton and center button and reset botton , no way , volume down and reset botton and i have the color screen but no change , all way worked before installing the update , now no way , what can i do sorry for my english.
Click to expand...
Click to collapse
please ask it only once....not 3 times in other threads...this is not allowed.
i have deleted them. read the rules before you post again.
thank you
band27 said:
I'm not sure what you mean by:
But...If you are upgrading the ROM or Radio please use this highly recommend way.
1. open from your PC the rar or zip archive and extract only the .nbh file
2. rename as DIAMIMG.NBH
3. copy the renamed file into the root dir of your "Storage Card" or "Internal Storage" (the one of 4Gb... NOT to the internal phone memory!)
4. soft reset your device and within 3 seconds push together the Vol_Down + Back button (the one on the right above the hangup button) and keep pressed until the boot loader appears (the one with the color stripes)
5. soon as you see the bootloader stop to press those poor buttons
6. a very simple gray menu will appear asking you what to do, simple press the power button to perform the ROM/Radio upgrade
7. while the upgrade runs be patient and don't press again the power button, reset the device or play with it until it finishes, when finished a message "UPDATE SUCCESS" will appear, now you can safely reset your device
8. who prefer can perform a hard reset after the fresh cook (soon after reset simply press Vol_Down + Circle button, then when you see another simple gray menu choose Vol_Up to confirm format), even if this has no-sense because internal memory is pre-formatted during flash, but... there is always a but... for some unknown "scientific" reason sometimes an hard-reset can save time & headache
Click to expand...
Click to collapse
This post is exactly what i needed to upgrade using the internal (memory) route.
touch diamond p3700 error
help me!!
My previous users of htc touch diamond p3700 s / n HT827GN42467 through my htc official site upgrade romnya WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, the program does not run again .....
solution please ....
help me please ....
My previous users of htc touch diamond p3700 s / n HT827GN42467 through the official website of my htc rom upgrade its WWE_2.03.707.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23 then I upgraded again so as Min 74 Evo 1.0 CHT 1.8.5 Full ITA .. problem after upgrading the screen does not go as originally only a white screen appears,,,, does not show the logo and the windows mobile does not work anymore at all also can not connect to pc ..... how can I fix that right again, the solution please ....
Hi, I have a problem with my defy and I really short to deal with that. First my defy stopped on red M logo and done proceed to system start. So I go to service menu, set clear cache- cache were cleared for 30mins so I take out batery, then I set - format/factory reset. same problem, it goes without end so after batery goes off, I make McGiver style for bring pnone to life and go to boot loader, run firmware flash over RSD lite and wait......after that RSD give me this message - Phone [0000] Error verifiing code group 33 Checksums. File:0x8BAC,Phone:0x4805 . RSD do nothing, on phone were instaling. after our when I suppose this is and I take out batery from phone and try run it. Every time start boot loader with message :
Code Corrupt
Battery OK
OK to Program
Conect USB
Data Cable
I cant launch android recovery, and If i flashed firmware again a have the same and. Can you please somebody help me with that??
Thanks,
ps. sorry for my english I think is not perfect
new thing, new error mesage from RSD. he pass Checksums errors, than give me message - restarting device ( that is not happend, device were still on), afted while there is new message : Failed flashing proces. Failed plashing proces. phone [0000] Error geting subscriber unit checksum. Device API error: 0xe003003F Command : (RQRCS 0xe403203f); phone conected
result FAIL
I am really desperate.. anyone have experience with this??
Thanks for any advice.
NoDi
As I see probably nobody had this issue like I had. Tomorrow I try bring phone to seller (Vodafone), and than I have to pray for reflashing it from them. Anywhere I will post result from them after I get some, If somebody have the same problem in future like I had.
NoDi
Difrent SFB
try usuing difrent sfb f.
have similar problem at some time...
just try using another sfb and do factory reset each time
yea.. some sbf have higher or lower on img version which might prevent your phone from fully flashed.
I tried various different FW from here. Everytime the same results. Today I was bring phone to Vodafone, I wonder on verdict
you said you tried all firmware versions, can you try diffrent RSD Lite version, may be RSD lite having problem. I am using " RSD Lite 4.9.msi ".
so phone is back. In report from service were Changed bad SWAP module. In used parts were 1pcs of RF board. Anyway I brought phone back to Vodafone because he cant sign in other than 3G network, and many places in our country are sill only 2G.
hi to all!
I am writing to you because I have a problem, I followed the tutorial to the letter relocker the bootloader, once done, I have a message "security warning" that appears below "relocked ".
I reboot bootloader the message disappears, so I launch the RUU SFR and there it gets complicated, "error 140" problem with the bootloader! I cracked it's almost 2:00 I looking for a solution, but nothing works, I can not even unlock this one - 'over the phone does not even load connected to the PC and can not access the recovery...
this is to install the ROM Maximus JB
Please help me!!
(translated with google)
srtdesign said:
hi to all!
I am writing to you because I have a problem, I followed the tutorial to the letter relocker the bootloader, once done, I have a message "security warning" that appears below "relocked ".
I reboot bootloader the message disappears, so I launch the RUU SFR and there it gets complicated, "error 140" problem with the bootloader! I cracked it's almost 2:00 I looking for a solution, but nothing works, I can not even unlock this one - 'over the phone does not even load connected to the PC and can not access the recovery...
this is to install the ROM Maximus JB
Please help me!!
(translated with google)
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1920546&page=2