Related
首先声明 本文是转载 作者是台湾的jojo0821大哥！！！
步驟如下：
1. 下載 SAMSUNGregistry 軟件並部屬它(手機須先解鎖)~~~ View attachment SamsungRegistry.xap
2. 從手機中啟動該軟體 上面區塊打 "HKLM\System\Platform\DeviceTargetingInfo\MobileOperator"，引號部分不要
3. 打完之後按一下 READ，應該會是 "GetString : ATT-US"
4. 把第二欄的所有信息清除，按下 WRITE
5. 再按一次 READ，應該會出現 "GetString :" 表示清除成功
6. 手機連上電腦，打開 Zune 檢查更新
7. 可以升到 7008 了
現在我們的 AT&T 版變成 Rogers 版本了，而 Rogers 版本的 NoDo 是已經準備派送了
Translated
This article is a reprint of the first statement is Taiwan's jojo0821 brother! ! !
As follows:
1. Download SAMSUNGregistry software and subordinates it (the phone must first unlock) SamsungRegistry.xap
2. from the phone to start the software above the block to play "HKLM \ System \ Platform \ DeviceTargetingInfo \ MobileOp erator", quotes some do not
3. Once on shore, then click READ, should be "GetString: ATT-US"
4. the second column removed all of the information, press the WRITE
5. Press READ, should appear "GetString:" Clear said the success
6. handset connected to the computer, open the Zune check for updates
7. can rise to 7008 by
Now we are into Rogers AT & T edition version, while the Rogers version of the NoDo is ready to dispatch the
Nice! My Dev phone (which is not an unbranded, carrier unlocked phone) is updating to pre-NoDo right now. It is very sad that I have to hack my phone just to get legit updates from Microsoft, and that I"m held captive by carriers.
Also, just to clarify the translation:
1. Download SamsungRegistry.xap software and install it (the phone must be a Developer Unlocked phone, or with the ChevronWP7 Unlock tool)
2. Launch SamsungRegistry and type in "HKLM\System\Platform\DeviceTargetingInfo\MobileOperator" without the quotation marks.
3. Click READ, and the returned value should be "GetString: ATT-US"
4. Tap in the Value field and delete the contents, then press Write
5. Press READ again, should appear "GetString:". No value = success
6. Connect your device to the Zune software and it should detect the Feburary 2011 Update needs to be applied, which will only be version 7008.
MS should be rolling out NoDo to US unbranded phones soon, I hope!
This is already posted in the unbranding thread. Thanks nonetheless.
http://forum.xda-developers.com/showthread.php?t=1004487
Please note that this update can be tricky. My Samsung locked up on me 5 times last night before the update would take. Personally, I wouldn't recommend doing this unless you are really really ansy about the new update. Plus, the PreNoDo is not that amazing. It is snappier and faster, but it doesn't seem like I should have gone through the hell I did. I'm not saying it always happens, or even happens 1% of the time (I could be an anomolous user), but after a plethora of errors I would just be patient...
Ah, thanks for the link. I haven't had any issues since removing the carrier branding, and installing the pre-NoDo update.
Disclaimer, use this at your own risk, if this voids your warranty I’m not being held responsible, blah blah all that junk.
Well, first, thanks go out for Microsoft for releasing a support tool for Windows Phone yesterday. Inside that tool, were unreal hidden gems.
Basically they’ve created a managed wrapper over the whole update process for us, rather nice of them.
So I flashed my HTC Mozart back to RTM (7004) via a ROM update HTC ship and whipped up a little application to flash pre-NoDo (7008), NoDo (7355), NoDo update 1 (7389) & NoDo update 2 (7390) all in a single process. No I don’t care which carrier you are on, which phone you have, it’ll just update your phone accordingly.
We really have to commend Microsoft here for being able to split up the OS updates into differential packs, which saves users downloading 200+ MB updates, unlike the IFruit updates.
All you need to do is run the ChevronWP7.Updater.exe console app and follow the prompts.
Make sure you select the RIGHT language for your device. To double check what your default language is, go to Settings > Keyboard and if your selected language is displayed in the Console app, you’re good to select it. If it isn’t in the list, DON’T flash it just yet.
Now, download the following files.
x86 Operating System (32 bit)
Windows Phone Support Tools
http://download.microsoft.com/download/1/5/4/15427EAF-AD42-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi
ChevronWP7.Updater
http://www.megaupload.com/?d=G1OEGML1
x64 Operating System (64 bit)
Windows Phone Support Tools
http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi
ChevronWP7.Updater
http://www.megaupload.com/?d=40MA6F02
Once you’ve installed the support tools and extracted the ChevronWP7.Updater.zip to the desktop, plug your phone in and wait 30 seconds.
Now start ChevronWP7.Updater.exe (this should kill Zune) and follow the prompts.
If you’re updating from Version 7004, you need to run the Updater TWICE, this needs the preUpdate before we can flash NoDo.
Again, if your language isn’t in the Chevron updater, DON’T attempt to update your phone. Some of the applications won’t work otherwise.
This “might” work for HD2 owners, haven’t tried it out just yet. If it does, report below and tell me .
There is NO revert process, again, flash at your own risk.
I flashed my Samsung Omnia 7 works fine
Big Tenks to walshie
If I do so like you suggest with my HD2 (WP 7.0.7004.0), he still asks to update the february update..
And I did it twice like suggested...
Thanks anyway!
It doesn't work for me but I still have to install the February update. Does anyone know if there is already a new rom with this update included?
Thx!
Works for me, Samsung Focus AT+T and had to run it twice to get both updates.
Source
Where does this method pull the updates from? Is it the same update being tested by AT&T for the Focus?
Didn't work for me...tried 4 times and kept getting some error, then got booted from the program...not sure what the deal is. Samsung Focus, AT&T
Sent from my SGH-i917 using Board Express
Also not working for me- Samsung Focus on AT&T. Program runs, reboots phone, seems to update, but on examination I'm still at 7004.
Sadly I should've resisted. I did this on my AT&T Samsung Focus, everything is great except I have no marketplace and no Zune functionality..
LastOttoman said:
Disclaimer, use this at your own risk, if this voids your warranty I’m not being held responsible, blah blah all that junk.
Well, first, thanks go out for Microsoft for releasing a support tool for Windows Phone yesterday. Inside that tool, were unreal hidden gems.
Basically they’ve created a managed wrapper over the whole update process for us, rather nice of them.
So I flashed my HTC Mozart back to RTM (7004) via a ROM update HTC ship and whipped up a little application to flash pre-NoDo (7008), NoDo (7355), NoDo update 1 (7389) & NoDo update 2 (7390) all in a single process. No I don’t care which carrier you are on, which phone you have, it’ll just update your phone accordingly.
We really have to commend Microsoft here for being able to split up the OS updates into differential packs, which saves users downloading 200+ MB updates, unlike the IFruit updates.
All you need to do is run the ChevronWP7.Updater.exe console app and follow the prompts.
Make sure you select the RIGHT language for your device. To double check what your default language is, go to Settings > Keyboard and if your selected language is displayed in the Console app, you’re good to select it. If it isn’t in the list, DON’T flash it just yet.
Now, download the following files.
x86 Operating System (32 bit)
Windows Phone Support Tools
http://download.microsoft.com/downl...-4E4A-8179-9A3C5483E366/WPSupportTool-x86.msi
ChevronWP7.Updater
http://blog.walshie.me/Share/ChevronWP7.Updater.x86.zip
x64 Operating System (64 bit)
Windows Phone Support Tools
http://download.microsoft.com/downl...E4A-8179-9A3C5483E366/WPSupportTool-amd64.msi
ChevronWP7.Updater
http://blog.walshie.me/Share/ChevronWP7.Updater.x64.zip
Once you’ve installed the support tools and extracted the ChevronWP7.Updater.zip to the desktop, plug your phone in and wait 30 seconds.
Now start ChevronWP7.Updater.exe (this should kill Zune) and follow the prompts.
If you’re updating from Version 7004, you need to run the Updater TWICE, this needs the preUpdate before we can flash NoDo.
Again, if your language isn’t in the Chevron updater, DON’T attempt to update your phone. Some of the applications won’t work otherwise.
This “might” work for HD2 owners, haven’t tried it out just yet. If it does, report below and tell me .
There is NO revert process, again, flash at your own risk.
I flashed my Samsung Omnia 7 works fine
Big Tenks to walshie
Click to expand...
Click to collapse
In the future, just link directly to my Blog, direct linking to the installers doesn't enable me to update them if there is an issue.
so i shouldn't be doing this if i have Samsung Focus on AT&T?
mastamind518 said:
so i shouldn't be doing this if i have Samsung Focus on AT&T?
Click to expand...
Click to collapse
If you follow the post, there are detailed instructions for Samsung Focus users.
walshieau said:
If you follow the post, there are detailed instructions for Samsung Focus users.
Click to expand...
Click to collapse
thanks it worked. shows 7390.
Focus
Worked for me too on my ATT branded, locked Samsung Focus. Now running 7390.
Have an AT&T Focus, carrier unlocked, Chevron'ed and I can't seem to update. I have tried using the "Windows Support Tool" and still no luck. See log below if it looks right
UpdateWP version 4.7.1404
Applying updates to device
Id: \\?\usb#vid_045e&pid_0710#b7d536af-3362-ca4a-6b09-6f8888553bf1#{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: af36d5b7 - 62334aca - 6b096f88 - 88553bf1
Name: SGH-i917
KITLName: QSD8XXX19417BBB
Manufacturer: SAMSUNG
ModelId: 1
MobileOperator:
Version: 07.00.07004.00-00000
Checking your phone's status.
Checking your phone's status: Completed in 0.01 seconds
Checking system requirements.
Checking system requirements: Completed in 0 seconds
Downloading updates.
Downloading updates: 0%
Downloading updates: Completed in 3.07 seconds
Checking system requirements.
Checking system requirements: Completed in 0 seconds
Installing updates. Please wait: 100%
Installing updates. Please wait: Completed in 5.57 seconds
Rebooting your phone..
Rebooting your phone: Completed in 42.3 seconds
Completing updates..
Completing updates: Completed in 1.28 seconds
The device has been updated to version 07.00.07004.03-00.00.00000.00-00.00.00000.00
When i look at the "About" status it still shows 7.00.07004.0
Any ideas?
Hi, HTC Surround
I am updating and it goes to downloading update but fails to go any further. just closes chevron
Any Ideas
Updated fine, but after the update anything related with messaging (SMS's, E-mail some contacts) doesn't work. Orange HTC Mozart running branded 7008...
Chevronwp7update was removed from the site. Where else can it be downloaded from?
Same here HTC Mozart telstra
Sent from my T8697 using XDA Windows Phone 7 App
Updater seems to be offline?
Anyone has got updated Links or a mirror?
Thanks in advance
Ok, I installed the Debrander xap util and it debranded to 00-88. I then ran Zune and it showed update available. It upgrade phone to 7008 from 7004. But even after that running chevron update still fails.
Maybe it was pulled from the site due to unforeseen problems.
Btw, don't reinstall debrander over your original debrander as it loses the original carrier details no I cannot rebrand to at&t unless I do a reg hack *I think*
If you get this error while trying to install mango:
"Checking if your phone is dev unlocked...
Failed. Please try the following
1) Connect the phone
2) Launch Zune software and wait for it to connect to the device
3) Close Zune software
4) Restart the tool. "
and if you use Windows Phone Device manager it might be some problem with that.... IM not quite sure but for me unistaling WPDM and resetting the phone worked
I know it sucks but at least i have mango now
I hope i was able to help you
I think you need to unlock SPL. like HD2. if your device comes from HTC
Did you run the "Windows Phone Developer Registration" (from latest version of Developer Tools, released 29th of June)?
Can someone please simplify all this for me?
The information on this site is so convoluded in terms of methods, some expired , some still valid, and guesses that are plain wrong, and irrelevancies.
I have been reading, installing, and uninstalling for hours into days.
Samsung Focus
1. Can Mango unlock be achieved with unlock from 7004?
2.I was on NoDo unlock and followed some instructions for the Focus that did not work. It went right to Mango LOCKED (as many others have reported).
I made a nice little back up of my NoDo unlock but can't get back to it using any version of Zune or any method, they all result in restore errors.
My back up might as well be on the north pole because I can't get to it.
3.I flashed back to 7004 and couldn't get chevron to unlock again like I used to be able to on XP or WIN 7 with various zune versions back to 4.7.
I'm wondering if the newer Zunes corrupted that somehow because last time it worked was on a fresh zune install on windows 7.
And besides that, they all ask to be upgraded before they do a back up, usually.
4.But even if it is unlocked at ROM 7004, zune updates (if chosen) will send it back to mango and locks it agian right? That's what happened last time , it just kept updating the phone for hours and then it was back to mango.
5.It appears my only option now is Mango locked or 7004 flash Rom with possible unlock.
Hopefully answers here will help others as well.
A few answers, though not compreheensive:
1) You don't have to let WP7 install each update, if you wanted to stop at, for example, NoDo 7392, you could. Just wait untilt he update gets that far, then pull the plug and/or hit Ccancel in Zune. Left to itsself, it will install all available updates.
2) The phone automatically dev-relocks whenever a major update is installed - this happens even to people with legitimate develop-unlock (and it's annoying!) For Samsung, I believe the technique for preserving unlock is the same one used to get interop-unlock on Mango: place an unlock provxml file in \provxml\ on the phone's filesystem (you can either use Heathcliff74's WP7 Root Tools to do this, or you can just install his interop-unlock XAP) and make sure you have a working version of the Samsung Diag app (should allow you to process provxml files). Once you have that, you can install all the way up to the Mango update safely, I think (I don't have a Samsung, but it should work) and use the Diag app to process your provxml file, which will both dev-unlock and interop-unlock the phone.
Not sure what's up with your backups; I can't really help you there without more information. What error do you get? What version of Zune are you using (you probably should use the latest version, 4.8.whatever)? How big is the backup (it's in %localappdata%\Microsoft\Windows Phone Update\)?
As for what guides to follow, starting with the stickies is always a good idea.
Hello,
I have a HTC Mozart device wich is momentarily running on unlocked NoDo.
I have followed various guides from xda but I end up running a locked Mango (most of the guides require after Mango update to run HTC Connection Setup to unlock... which I am unable to run (black scren) and all other apps tell me revoked by Microsoft).
is there any latest guide a little more foolproof?
It seems that after 18th October something happened with Zune which prevents Mango unlock...
Gyuritzy said:
Hello,
I have a HTC Mozart device wich is momentarily running on unlocked NoDo.
I have followed various guides from xda but I end up running a locked Mango (most of the guides require after Mango update to run HTC Connection Setup to unlock... which I am unable to run (black scren) and all other apps tell me revoked by Microsoft).
is there any latest guide a little more foolproof?
It seems that after 18th October something happened with Zune which prevents Mango unlock...
Click to expand...
Click to collapse
After you install the interop-unlock xap while on nodo then goto mango you reinstall the diag app and in the Diagnosis app dial: *#9908#.. Select "Heathcliff74 Interop Unlock"
then tap Save, tap Close and exit the Diagnosis app
@lucasryan: Those are the instructions for a Samsung phone. They don't work at all on an HTC phone.
@Gyuritzy: Currently, Microsoft is pushing the Mango update and an HTC update together. The HTC update blocks the unlock path used with Mango. If your phone gets that update - which means if it gets Mango through the retail update path - there's no current way to interop-unlock it.
If you can get Mango through an atypical upgrade path (I came from the beta, which worked), or if you use a custom ROM (be *very careful* of the bootloader version if you try this!!), you can get interoop-unlocked Mango on HTC. It's not easy, though.
Ahh i see that i quoted his post now. as alan93 has focus
What solution do I have to load Mango without HTC update? Should I try with RCT2RTM type of packagge?
@GoodDayToDie
#1 - ahh ok, but I'm sure watching the update tentativley is required right? For like an hour and a half.
#2 - now see, there you go again, this is only for dev-unlock people which , i'm not even sure what that is..what? you pay $100 to MS to get it? It needs to be stated more clearly where ever that solution is posted AT THE VERY TOP like this "IF YOU ALREADY HAVE A DEV UNLOCK ....
@ lucasryan - That can't be right, -->"installing interop unlock on NoDo then go to Mango"...STOP RIGHT THERE. when you go to Mango it wipes everything out and you have no more access...unless of course ..YOU ALREADY HAVE A DEV UNLOCK...what ever that is.
I did try the diagnosis trick on update to mango after putting that file on there but the diagnosis version would not go higher than 908 or what ever. Couldn't get 1112 or what ever the one that is needed.
Please, just say there is no way to unlock Mango unless you have a dev unlock and that is low percentage as it is...then I won't expect so much.
Thanks for the replies.
Here is the zune error I get on trying to restore to my NoDo unlock.
http://answers.microsoft.com/en-us/...-restore/3ec7091d-d79d-422c-9995-cfe186e0155b
As you can see nobody is dying to answer it.
I think the code number means "this goon is trying to restore to an unlocked version, don't answer him".
@alan93: Developer Unlock is the term used for the change to your phone made by the Windows Phone Registration Tool (if you have a marketplace developer account), ChevronWP7 Unlocker (possible on pre-NoDo), ChevronWP7 Labs (coming soon), or changing the DeveloperUnlockState registry value located at HKLM\Comm\Security\LVMod to 1 (possible with the LG registry editor, or by using the Samsung diag app or HTC Connection Setup app to process to provxml file). The registry change is actually what matters; the other methods are simply ways to achieve it.
Dev unlock allows you to install XAP files - a renamed ZIP file with some manifest XML files, one or more managed (.NET-based) DLL files, and possibly other files needed by the application. Due to a bug in the application installer, you can also use a XAP to put arbitrary files almost anywhere in the filesystem (the installer can't write to the \Windows\ directory).
One of those manifst files specifies capabilities that the app has, which controls permissions of the app (for example, ID_CAP_ISV_CAMERA allows access to the public camera APIs). As of Mango, including beta versions, it is no longer possible to install apps with the ID_CAP_INTEROPSERVICES capability unless the MaxUnsignedApp registry value (located in HKLM\Software\Microsoft\DeviceReg\Install) is set to at least 300 (the default value is either 10 or 3, depending on the unlock method used). ID_CAP_INTEROPSERVICES is required for interfacing with drivers, a way for applications to run at high permissions (for example, to write to the registry). Each time you install a major upgrade, such as Mango, this value is reset to its default. An app with ID_CAP_INTEROPSERVICES therefore can't be installed (or run, if it was installed before upgrading to Mango) until this MaxUnsignedApp registry value is changed, a process referred to as Interop-unlock (term coined by Heathcliff74 on this forum). Marketplace-installed apps are exempt from this restriction, which is why things like Connection Setup (which has ID_CAP_INTEROPSERVICES) can be used.
For what it's worth, I got my dev-unlock by purchasing a marketplace developer account ($100 from MS). One day I may even submit an app to the marketplace, but so far all the apps I've written use homebrew and wouldn't be acceptable for the marketplace, so I just publish them here.
Thanks great explanation.
I intend to write my own too, I wrote one and have a few more great ideas but didn't want to pay until i made sure I was able to write them completely and testing on the simulator sux. And last I heard, the media player doesn't work with it.
I just think the fee and lockout just hurts development thereby limiting the success of WP7.
If it was $50 or less I would probably pay it.
I mean for crying out loud I'm a certified MCP/MCAD, they should give me a break here.
Lumia 640 xl
OS and firmware: Windows 10 mobail, firmware v_1607, build 14393.693
Description of the problem:
After you install the dependencies and applications
Microsoft.NET.CoreRuntime.1.0
Microsoft.VCLibs.ARM.14.00
CellMapper_1.2.18.0_ARM
did you enable developer and portal settings on phone? did you interop unlock your device?
and whats is problem? dont know how to install files?
interop unlock your device yes
You understand me wrong. After installing these applications.Now ceased to run all of the applications xap file on the phone.
check interop unlock again...
mmm I recently reinstalled those dependencies trying to reinstall interops and for some reason the phone can no longer update-install ANY app and registry changes dont hold after reboots
maybe it has something to do with reinstalling the dependencies?
Installed interop tools RC 1.9.437.0. the problem is not gone.The application hangs on the start screen doesn't open ,it is "xap-file" app. Tried to reinstall the dependencies to no avail.All appxbundle application run.
in interop tools under interop unlock enable "Restore NDTKSvc". wait 30 seconds, restart phone. go again to interop unlock and turn on interop/cap unlock.. registry editing and other should back again
if not, hard reset or flash phone again
in interop tools under interop unlock enable "Restore NDTKSvc". All inclusive on and off does not work.