Hey Everyone,
So I had installed & used the HDMI Mod successfully, but decided to purchase a laptop dock to try out for work. I had originally tried out the laptop dock when I first had the phone & it worked just fine; it would go right to the laptop mode when docked like it's supposed to, but now after I modded it, it doesnt work.
I try to set it in the dock & nothing happens. I've tried several methods to unmod & replace the original APK's as instructed int he OP, but that didn't work, so I finally went as far as to reimage with the retail SBK, which worked fine but still not dock success.
Anyone have any ideas on what needs to be done to get the docking working again? Any help would be appreciated.
Rock
easiest solution is to hop over the Dev section of the forum and download the 1.5.2 sbf and flash your phone back to normal. It will work, i had that same issue after i tried to get a full linux to run...after flashing the sbf it goes back to normal and webtop works again.
If not you might want to return it and get a replacement...it might be the device lost some crucial file that sbf doesn't carry.
Related
Hey all,
So i'm pretty new to all this phone tweaking but ive managed to try out a few things. A week back i flashed a new rom(bionix rom) onto my galaxy s i9000 through clockwork and i've managed to mess up my phone a little. After successfully flashing the rom i couldn't get 3g data and charge my phone or connect it to a computer. When i plug my phone into charging/computer it turns off and then gets itself into a phone charging loop. I then went back to the most recent backup rom(using clockwork) i made hoping it would fix the problem, but its still there. Later i realised the rom i flashed was made for another model of the phone, which uses a different band. When i go into settings, about phone it says the current band is T959 ( which is the vibrant), but i'm pretty sure thats the wrong band! The thing is i can still use my phone, it still turns on fine so its not bricked i guess? I can still play games, send texts,use wifi etc but i just can't use 3g data or connect it to a computer. I'm wondering if anyone has encountered a similar problem and would know how to fix it!
Thanks!
Pretty simple.. do a clean flash (re-partition checked, pit file selected) with any other firmware.
this will wipe all your data though, so make sure you make a backup
You use odin to do this?
I've thought of that but i cant connect phone to computer without it turning off :S
just use the search function... it's simple flashing... there are tons of tutorials for each single firmware (including which pit file to use and where to download)
I know that, but how can i use odin if i cant connect my phone to the pc?
did you actually try if the problem is the same when the phone is in downloadmode?
alternatively you could connect to adb through wifi (there is an app for that) push some rom that flashes through clockwork (tayatumas does i think) and flash it. might.fix your problem
Sent from my GT-I9000 using XDA App
Hey bro,
I managed to fix it! Sorry for sounding like a ****!
Cheers again
Hey guys,
I tried getting some help for this over at the Nook Color threads because it all started *after* i rooted my NC, but no one's been able to explain to me what Ive done wrong or whats happened...
So here's the sitch.
o I have ADB installed, but it only activates in device manager when the nook is plugged in, not the G2
o When the NC get usb'd to the PC, it fully registers and gives me access to the SD card on it
o .... where as the G2 just sits there and says "yay im getting power!"
o ,,,, BUT if i plug it into a HUB rather than directly into a usb port on the mobo or front, the PC (win7 x64 ult) seems to see it but doesnt know how to properly assign a driver to it and gives it UNKNOWN
o also i checked the usb-adb ini file, and it lists all my other devices in the hardware cues BUT the G2, which means it hasnt properly registered since then or never had a proper profile to begin with in the PC. It even has my older mt3G listed which I havent plugged in since all this started.
Ive tried multiple driver types, but literately, NOTHING has worked. Its like the G2 isnt even properly registering in the computer when connected. I tried a factory reset, but still no luck. Is there anything beyond a soft fact reset for an unrooted phone? I mean, i need COLD AS STONE back to day 1 reset.
Please help, I really want to root this :'<
and no, the only way now to access my sd card is to turn the thing off and use a reader. Like i said, it literately is NOT seeing it :<
Wrong section. Ask in the Q&A, not the DEV section.
Try installing HTC Sync, even though it doesnt work with the G2 because its sense based, it will install the proper drivers for you. This worked for me.
Heres the link:
http://www.htc.com/www/SupportViewNews.aspx?dl_id=1058&news_id=804
Another method would be install pdanet on you phone fron the Market, then install pdanet for your computer from here and it should install the drivers when you plug your phone in with pdanet app running:
http://www.junefabrics.com/android/
I tried the Sense link, but I couldnt find the download option for it.... anyways, heres a more precise description of the issue
When I go and install PDA Net, it loads up the drivers, but the computer literately is not even registering that a DEVICE has been plugged in via USB. I dont even get the USB connect prompt on the phone!
That's what Im saying, something is up. I need to take the cable with me and try this on another computer now that I think about it to rule out that something isnt damaged on the phone...
What ROM are you using? Gingerbread ROM's act like the (for now), at least from what I understand. I tried CM7 and sure enough - it acted just like what you're describing.
KCRic said:
What ROM are you using? Gingerbread ROM's act like the (for now), at least from what I understand. I tried CM7 and sure enough - it acted just like what you're describing.
Click to expand...
Click to collapse
But thats the whole thing, im not using a ROM, its just the stock OS build. if i was using a ROM, id have tried removing it and reloading it, but this is on a phone that isnt even rooted yet... actually... should I try going temp root again and see if that fixes anything?
Whats the best way to do that now since I keep reading Vision got pulled away because it was damaging phones or something?
Okay, so i tried plugging it into a diff computer.... same result... so whatever it is, its the phone.
Any ideas XDA pplz?
Has it seen the g2 before? if so, get usbdeview, find the drivers in there that would be used for the g2, delete those. Snag PDANet and download that, plug the phone back in and see what ya get. You will get the pop ups again about the new software being loaded since it will have to find and reload drivers for the phone and PDANet will have the drivers you need.
K41N2358 said:
Okay, so i tried plugging it into a diff computer.... same result... so whatever it is, its the phone.
Any ideas XDA pplz?
Click to expand...
Click to collapse
Like the guy above me said, DL or re-DL the drivers (though none should be needed if you're using it as a storage drive, the comp sees it as a usb drive). Is it charging your phone when you plug it in? It's rare, but the USB cable may be bad.
The only other thing I can think of is that something went wrong and the phone isn't releasing the mount to the sdcard, in which case you should try rooting and using a different ROM or a stock rom and it should help.
Well thats the whole thing, the computer doesnt even see the USB part of it. Thats been my whole issue. The computer doesnt see the phone or the usb drive part. It straight does not see the phone at *all*! Doesnt even show up in Dev Manager, but yet it gets power. I even went and got a new micro USB cable, fresh, and still nothing.
im getting to 86 the os and reload Win7, im like super uber pissed over all this because i cant figure it out. I dont even know whats wrong >_<!
Just for kicks (because I had this exact thing happen to another phone of mine - the slide) you're rooted, which means you have clockwork right?
Reboot into recovery and go to the 'mounts' part and select 'mount usb'. Do that with it plugged into your computer and let me know if the phone shows up then. That's the only way I could put it in mass storage mode. I flashed something other than cyanogen's rom and BAM, it worked like it was supposed to (Linux did mount cyanogen though - weird).
If you want to go back to 0 day with your G2, search 'PC10img' and download it. DO NOT FLASH IT YET, you could really screw up your phone since you have s-off. Go to the wiki and scroll to the bottom, it tells you how to get s-on. Once you can verify that you have s-on, proceed to flashing the pc10img.
Wiki
Okay, so, Im way better now. Apparently I managed to get s-off and root ability via
http://forum.xda-developers.com/showthread.php?t=837315
when i reloaded and got rooting ability, somehow, I now have a detectable sd card again.
I dont know how, I dont know why, I just know that Im going to throw CM6.1.1 onto this thing and be rocking it hard
Thanks again for all your help guys, it was awesome to know XDA really helps out its followers
EDIT:
Okay... so now Im mixed. I have a rooted phone, with CM6.1.1, but still doesnt properly recognize when plugged into the PC.
oh well, I already called TMobile and their sending me a new phone under warranty. Its gotta just be a busted port in some way for detection. I dunno. >_<
But still, thanks a lot guys. Means a lot
ok let me start with the problem, I have a galaxy s2 and when I plug in the usb to the phone and the pc I get nothing but a charging sound. I don,t get the little pop up in the top bar that says its connected to a usb,
now with that said I know to check the debugging the usb utilities and all those setting. I even did a factory reset to no avail. I have read many post that say update the pc drivers and even have done that. I have tried different wires that I know worked at one time and also different operating systems win7, ubuntu. I do have the phone rooted and at one time it did work. it worked best with ubuntu btw no drivers needed I don't know when it stopped working I don't use it much but one day I did go to use it and nothing.
Anyway if anyone has a suggestion out there I would be glad to hear it cuz I want to put linux on my phone with adb but cant till this issues is fix thats for you time
My phone is:
standard rom 2.3.6
an kernel 2.6.35.11
Its also a SGH-T989 thats why I moved it to this part of the forum sorry if its a double post feel free to delete the other in the wrong area thank you.
lodk said:
ok let me start with the problem, I have a galaxy s2 and when I plug in the usb to the phone and the pc I get nothing but a charging sound. I don,t get the little pop up in the top bar that says its connected to a usb,
now with that said I know to check the debugging the usb utilities and all those setting. I even did a factory reset to no avail. I have read many post that say update the pc drivers and even have done that. I have tried different wires that I know worked at one time and also different operating systems win7, ubuntu. I do have the phone rooted and at one time it did work. it worked best with ubuntu btw no drivers needed I don't know when it stopped working I don't use it much but one day I did go to use it and nothing.
Anyway if anyone has a suggestion out there I would be glad to hear it cuz I want to put linux on my phone with adb but cant till this issues is fix thats for you time
My phone is:
standard rom 2.3.6
an kernel 2.6.35.11
Its also a SGH-T989 thats why I moved it to this part of the forum sorry if its a double post feel free to delete the other in the wrong area thank you.
Click to expand...
Click to collapse
had the same issue and called Samsung i told them just about everything you have going on with no luck. called t mobile and went thru there process with no luck . they determined it was a hardware failure and shipped me a new phone. if you need to go stock for warranty exchange i had to remove my sd card and transfer the "return to stock zip" and put back in phone and flash. read the directions in the return to stock thread.
yeah thats what I was thinking, might just have to swap phones with the wife she don't ever use that part of the phone. Thanks
Hey Everyone
I've been looking around the site (and the rest of the web for that matter) and I can't find much on this that's helpful (at least not anymore).
I used to flash custom shizz on my phone regularly until I flashed back to stock for a while, and now I've decided to go back. The problem is, my USB port broke in the mean-time and I can no longer plug it in I know I could buy a new USB port, but it's a lot of work for a phone that I'm only going to be using for a couple more months (will be upgrading to the S5)
Is anyone aware of a way to root on the phone itself? So far I've tried http://forum.xda-developers.com/showthread.php?t=2352669 and Framaroot to no avail - I can't find anything else.
Any help would be massively appreciated.
Thanks!
I've been trying to figure this out for a while, and I have made some headway but I think I need to make custom build. If anyone could point me in a direction, it would be super helpful. I have a few ELO ESY15i1 android computers. They are EOL now, and only supported up to kitkat. ELO does not release their kernel source, but I do have their peripherals.
This is how far I have got with this thing, and what I was able to do/determine.
After a bunch of digging, I'm pretty sure that this thing is just a modified S4 i9505. Hardware specs seem to match, outside of the CPU only being 1.7 instead of 1.9ghz. I'm *assuming* that they have down clocked it maybe? The first unit I was working with, apparently had a bricked recovery (had bough it 2nd hand). I was able to boot it into TWRP using the jfltexx image, but I would get no picture. I know it was booted because I could access TWRP via cmd, and it was giving me responses back.
I was able to root it in a very round about way. Since I do not have any volume buttons, I'm limited to adb etc. I was able to root it with iRoot, convert that to supersu, and eventually get flashfire to install. I could finally access almost everything I needed. At some point, I got it stuck in a mode where "QHUSB_DLOAD" was shown to me, with a folder called "image" which I took a copy of. Any google results with that, was just people who had bricked their device, I was able to boot in and out of this, so I'm not sure what was going on or broken.
Here is what the device props listed out: hXXps://pastebin.XXX/FtgQ0DUE
This is the mobilodin report: hXXps://pastebin.XXX/BZrDAFg4
Finally, the "image" I copied: hXXps://anonfiles.XXX/lcQ7RfJ8o0/ESY15i1-image_rar
(sorry can't post links)
The first unit I was working on, I gave to a buddy to mess around with. The 2nd one I have, I have now bricked and it is officially stuck in the "QHUSB_DLOAD" mode. I made a poor choice, and modified the i9505 "updater-script" in lineage-17.1-20200723-nightly-jfltexx-signed to include my "msm8960" device. I flashed it via FlashFire which did go through, just bricked me in the process.
I had a samsung download jig, but I can't find it anywhere, so I have a new one on order. I'm too lazy to cut up a micro usb plug and make one. I have yet to get odin to recognize it at all, or get it into download mode. When I try over adb, it will reboot, try to go in some mode, then reboot again back to the rom.
Any input / help would be greatly appreciated. These machines are super cheap on ebay, the only problem is being stuck on kitkat. I can think of loads of things to use these for, doesn't look like anyone has tried to do anything with them. From all my searching I just found one guy who was trying to root one, and that was about it.
Hi,
I have one 22 inch unit, which I'd like to use with monitoring system and some else, but I need android version with multi windows support, so I'd like to ask you if you succeed with installing new ROM ?
Thanks in advance for reply
Maciek
Well, I've been dinking around with it again, I think I have the HW figured out. I'm pretty sure it's an LG Optimus G, LGE970 is what I'm trying.
I was able to take the stock "ATT-Stock-E97020j" non KDZ zip, pull the boot.img off of it, and flash that.
Now when I connect to my computer, I'm getting LGE Androidnet for Diagnostics, and LGE Androidnet USB serial, as 2 devices.
Just keeps hanging right away when I try and flash the KDZ.