Develop Bugs

Bad Flash

I flashed Galaxy SBean but I didn't flash the PA Pref file, now my phone won't boot and I cannot mount the system through Clockworkmod, also when I try and format the system all it does is freeze CWM and now I cannot do anything, my brother who is very good with phones and knows how to make ROMs and stuff is trying to help me but he is gone for now, I messed up my phone last night before a movie and now I am frustrated because I cannot fix this... Please help? You guys know a lot more about phones than I do!

Mew351 said:
I flash Galaxy SBean but I didn't flash the PA Pref file, now my phone won't boot and I cannot mount the system through Clockworkmod, also when I try and format the system all it does is freeze CWM and now I cannot do anything, my brother who is very good with phones and knows how to make ROMs and stuff is trying to help me but he is gone for now, I messed up my phone last night before a movie and now I am frustrated because I cannot fix this... Please help? You guys know a lot more about phones than I do!
Click to expand...
Click to collapse
Are you able to go into download mode? If you are able to get into download mode go ahead and flash a stock ROM using Odin. There are many videos and instructions on how to do this littered all over the internet. You will lose everything though user data, root etc. but from that point you can start fresh like you just took the phone out of the box. Also is your computer picking up the phone when you plug it in? If not, just make sure you have the drivers installed so your computer can identify that you've plugged in your phone.

WangLung said:
Are you able to go into download mode? If you are able to get into download mode go ahead and flash a stock ROM using Odin. There are many videos and instructions on how to do this littered all over the internet. You will lose everything though user data, root etc. but from that point you can start fresh like you just took the phone out of the box. Also is your computer picking up the phone when you plug it in? If not, just make sure you have the drivers installed so your computer can identify that you've plugged in your phone.
Click to expand...
Click to collapse
Well I tried to install the driver, but it still wouldn't recognize the device.

Fixed it
Thanks to the previous reply!

[Q] Phone doesn't connect to GSM

Hello.
So my N7100 doesn't connect to mobile network. No voice calls, text messages or mobile internet. Wifi works just fine, although signal seems to be a little weaker (maybe just my imagination).
What I did and how it happened:
I got sick of Samsung being assholes and not pushing out software updates, so I decided to flash some custom ROM. I choose CM, because they had that "one click installation", so I didn't have to do a lot of work. After a week of using CM I decided that it sucks and wanted back my original android with all gimmicks from Samsung, mostly because battery life with CM was terrible, not even one day. And that's when everything went downhill. I downloaded and installed firmware for Baltic region, because I live here and I bought my phone here. From that moment my phone stopped being phone and evolved into wifi only tablet. After being very pissed and trying to flash couple different roms I gave up. Found my phones original box user manual and other papers. It turns out that my phone is made for Hungary region. So shop where I bought it must have imported wrong models (most likely cheaper for bigger profit). Flashing original for Hungary made firmware doesn't resolve this issue.
Guys, I really need help. I just want to return to stock - original firmware and reset flashing counter. Please help, and if possible in layman's terms...

EddsLV said:
Hello.
So my N7100 doesn't connect to mobile network. No voice calls, text messages or mobile internet. Wifi works just fine, although signal seems to be a little weaker (maybe just my imagination).
What I did and how it happened:
I got sick of Samsung being assholes and not pushing out software updates, so I decided to flash some custom ROM. I choose CM, because they had that "one click installation", so I didn't have to do a lot of work. After a week of using CM I decided that it sucks and wanted back my original android with all gimmicks from Samsung, mostly because battery life with CM was terrible, not even one day. And that's when everything went downhill. I downloaded and installed firmware for Baltic region, because I live here and I bought my phone here. From that moment my phone stopped being phone and evolved into wifi only tablet. After being very pissed and trying to flash couple different roms I gave up. Found my phones original box user manual and other papers. It turns out that my phone is made for Hungary region. So shop where I bought it must have imported wrong models (most likely cheaper for bigger profit). Flashing original for Hungary made firmware doesn't resolve this issue.
Guys, I really need help. I just want to return to stock - original firmware and reset flashing counter. Please help, and if possible in layman's terms...
Click to expand...
Click to collapse
Press *#06# and see if your EMEI is fine... If it says something like 000000000049 it seems to be bugged and you can try this solution:
I flashed the firmware N7100XXDMF2_N7100OLBDMD2_XME using ODIN PC and follow the below using root explorer:
- copy /efs/ to the sdcard
- delete /efs/
- reboot (after reboot I got the yellow recovery mode window floating over, no lock screen, and pressing power button turns the phone off directly)
- /efs/ will be autocreated again. copy the efs folder from the sd card to / (root explorer will tell you that the folder already exists and it will merge them)
- reboot
PS: I did not have an /efs/ backup before applying the above.
Click to expand...
Click to collapse
I saw from another post. Im going to try this too since Im having the same problem as you.
Find your ROM here: http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=CHE#firmware I selected Chile Entel, but you can choose your country and company, it is the original ROM and it should fix our problem, Im downloading the ROM by now.
To use Odin, just put your phone in download mode (vol up/down + home + power) and then plug in to your PC, open Odin and at "PDA" select your ROM, then put start and just wait a few minutes and it should be working again...
After this, you should make a back up of your EFS file using a root explorer and then flash with any ROM you want (Im trying Ditto 3, it seems to be a cool jelly bean) and after this flash, you should put your new EFS file... Just the problem that Im facing is how to put this backup since the EFS is a folder being readed all the time, so there should be a program to do this, but I cant figure this out yet.

My phone doesn't have any IMEI any more. "null/null" is value given by my phone after requesting IMEI. I already flashed original ROM, problem is still here.
About /efs/ I could backup it with "File Manager"app from google play, but I can't delete it, because it is in read only.

EddsLV said:
My phone doesn't have any IMEI any more. "null/null" is value given by my phone after requesting IMEI. I already flashed original ROM, problem is still here.
About /efs/ I could backup it with "File Manager"app from google play, but I can't delete it, because it is in read only.
Click to expand...
Click to collapse
Somehow you will have to access to edit it and you will be able to solve that problem... Otherwise go to technical service.

kito2 said:
Somehow you will have to access to edit it and you will be able to solve that problem... Otherwise go to technical service.
Click to expand...
Click to collapse
In order to delete /efs/ you have to be rooted, when you flash factory rom you loose root privileges.

EddsLV said:
In order to delete /efs/ you have to be rooted, when you flash factory rom you loose root privileges.
Click to expand...
Click to collapse
After flash factory rom is easy to make root again hehe.. Anyways keep reading and maybe you will find another solution, you can't be the only one who had that problem... Good luck my friend.
Try this link http://forum.xda-developers.com/showthread.php?t=1896696

kito2 said:
After flash factory rom is easy to make root again hehe.. Anyways keep reading and maybe you will find another solution, you can't be the only one who had that problem... Good luck my friend.
Click to expand...
Click to collapse
Thanks. So I rooted my phone and did all than you wrote above - copied, deleted, replaced. It didn't helped and now I have that yeleow recovery window all the time :/

[Q] Need help going back to stock, there's some complications with my phone now.

I've spent all day yesterday trying to fix this problem. I've downloaded gigs upon gigs of stock rom files, saw a ton of youtube videos etc. Still nothing.
So here's the deal. I had Cyanogenmod 10.2 on my phone for a while now and I've always had problems, although a nice rom but too many crashes, battery drainage etc. So I wanted to go to stock but before doing so I thought I'd give Cyanogenmod 11 a try and see how that works, which turns out to be worse and I lost all phone signal and data, pretty much no service. So now I tried to go back to stock for good. I downloaded the stock 4.1 something rom file, odin and tried going back which didn't work cause I would keep getting a fail sign on odin. By the way I tried different versions of Odin since that was suggested to me by my friend and that didn't do anything either. Then I read a blog about using Samsung Kies on my PC, now after I did that I got a message on kies that my phone encountered an error. Now when I turn my phone on I get a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is my phone bricked for good? Can I go back to stock? I'm not sure what else to do here now. Why is it hard finding a stock unrooted 4.3 rom for my phone on the internet? I also can't use that clockwork recovery mode either, it just gives me the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" when I try going into that to even try and install Cyanogenmod again so I can use my phone until I find a solution to going back to stock.
Help ploxkthxbai.
Edit: Ok so I just installed clockworkmod recovery through odin and I was able to install a rooted stock rom through the recovery, but now the problem I'm encountering is that it gets stuck on the AT&T logo when booting up the phone. Installing stock rom through odin still gives me the fail message.
Edit 2: I tried installing a stock unrooted rom through recovery and it gave me some error but now the phone goes passed the AT&T logo after that however I have no service now. How do I fix that and how should I go about installing stock unrooted rom since Odin gives me the fail message?

Dagobert_ said:
I've spent all day yesterday trying to fix this problem. I've downloaded gigs upon gigs of stock rom files, saw a ton of youtube videos etc. Still nothing.
So here's the deal. I had Cyanogenmod 10.2 on my phone for a while now and I've always had problems, although a nice rom but too many crashes, battery drainage etc. So I wanted to go to stock but before doing so I thought I'd give Cyanogenmod 11 a try and see how that works, which turns out to be worse and I lost all phone signal and data, pretty much no service. So now I tried to go back to stock for good. I downloaded the stock 4.1 something rom file, odin and tried going back which didn't work cause I would keep getting a fail sign on odin. By the way I tried different versions of Odin since that was suggested to me by my friend and that didn't do anything either. Then I read a blog about using Samsung Kies on my PC, now after I did that I got a message on kies that my phone encountered an error. Now when I turn my phone on I get a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is my phone bricked for good? Can I go back to stock? I'm not sure what else to do here now. Why is it hard finding a stock unrooted 4.3 rom for my phone on the internet? I also can't use that clockwork recovery mode either, it just gives me the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" when I try going into that to even try and install Cyanogenmod again so I can use my phone until I find a solution to going back to stock.
Help ploxkthxbai.
Click to expand...
Click to collapse
The easiest way to fix it is to take it to a best buy store they will flash stock 4.3 on it free of charge, this is the advice that is now given by Samsung. Alternatively you could get the phone jtag'ed or while it says firmware upgrade encountered an issue it is in download mode and you can flash things with Odin. You can attempt to flash a recovery image to see if you can access recovery and flash enewman17's stock restore from the development section. You can also attempt to hard brick it with Odin by flashing stuff that has pre 4.3 bootloaders then use the debrick method here http://forum.xda-developers.com/showthread.php?t=2549068.
I recommend you try the best buy method first, then try to flash a recovery, then try to hard brick it and recover it and lastly to get it jtag'ed.
If you can't get it recovered after intentionally hard bricking it you haven't lost anything you were still going to need a jtag service but it might work.
Under the advice of Samsung I tried the same thing you did and they told me to take it to best buy to get it fixed, instead I hard bricked it then used the sd card method to debrick it. Which I had already done twice. But that method doesn't work for everyone I was lucky 3 times and had to jtag once(flashed the i747m bootloader bad idea had to jtag) since then I have quit pushing my luck and only flash things I know are safe for the phone.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Dagobert_ said:
I've spent all day yesterday trying to fix this problem. I've downloaded gigs upon gigs of stock rom files, saw a ton of youtube videos etc. Still nothing.
So here's the deal. I had Cyanogenmod 10.2 on my phone for a while now and I've always had problems, although a nice rom but too many crashes, battery drainage etc. So I wanted to go to stock but before doing so I thought I'd give Cyanogenmod 11 a try and see how that works, which turns out to be worse and I lost all phone signal and data, pretty much no service. So now I tried to go back to stock for good. I downloaded the stock 4.1 something rom file, odin and tried going back which didn't work cause I would keep getting a fail sign on odin. By the way I tried different versions of Odin since that was suggested to me by my friend and that didn't do anything either. Then I read a blog about using Samsung Kies on my PC, now after I did that I got a message on kies that my phone encountered an error. Now when I turn my phone on I get a message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Is my phone bricked for good? Can I go back to stock? I'm not sure what else to do here now. Why is it hard finding a stock unrooted 4.3 rom for my phone on the internet? I also can't use that clockwork recovery mode either, it just gives me the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" when I try going into that to even try and install Cyanogenmod again so I can use my phone until I find a solution to going back to stock.
Help ploxkthxbai.
Edit: Ok so I just installed clockworkmod recovery through odin and I was able to install a rooted stock rom through the recovery, but now the problem I'm encountering is that it gets stuck on the AT&T logo when booting up the phone. Installing stock rom through odin still gives me the fail message.
Edit 2: I tried installing a stock unrooted rom through recovery and it gave me some error but now the phone goes passed the AT&T logo after that however I have no service now. How do I fix that and how should I go about installing stock unrooted rom since Odin gives me the fail message?
Click to expand...
Click to collapse
Do you still have your IMEI on your phone or is it showing 0?

Dagobert_ said:
Edit 2: I tried installing a stock unrooted rom through recovery and it gave me some error but now the phone goes passed the AT&T logo after that however I have no service now. How do I fix that and how should I go about installing stock unrooted rom since Odin gives me the fail message?
Click to expand...
Click to collapse
Go to settings, about device, what does it show for baseband? Then go to settings, status does the imei number for the phone show up, say unknown or 0? If it shows unknown for the baseband and imei you simply need to flash a modem. If it shows the correct baseband but your imei shows as 0 your imei has become corrupt search for imei restore the fresh a ton of threads about it most people loose lte after an imei restore but there is a fix for that too. If you are having problems with wifi try flashing a kernel.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Go to settings, about device, what does it show for baseband? Then go to settings, status does the imei number for the phone show up, say unknown or 0? If it shows unknown for the baseband and imei you simply need to flash a modem. If it shows the correct baseband but your imei shows as 0 your imei has become corrupt search for imei restore the fresh a ton of threads about it most people loose lte after an imei restore but there is a fix for that too. If you are having problems with wifi try flashing a kernel.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I just did that and my phone is now hard bricked. Won't turn on at all, won't vibrate or anything. It's completely dead. Tried the sd card method and that's not working so far. So I need a jtag service for this. Not even sure what that is right now until I look that up after this reply. I did look into those usb jigs but it seems that's only if it's soft bricked.
Edit: Trying the sd card method on the 4th try worked. Now back to fixing this.

Dagobert_ said:
I just did that and my phone is now hard bricked. Won't turn on at all, won't vibrate or anything. It's completely dead. Tried the sd card method and that's not working so far. So I need a jtag service for this. Not even sure what that is right now until I look that up after this reply. I did look into those usb jigs but it seems that's only if it's soft bricked.
Edit: Trying the sd card method on the 4th try worked. Now back to fixing this.
Click to expand...
Click to collapse
What did you flash that hard bricked your phone? A modem should have been pretty safe to flash. I have flashed a bunch of different ones the worst that ever happened to mine was no service or poor service.
What exactly still needs fixing? No service still? Did you check imei and baseband? Intact, unknown or 0? Will be available till about 7am off and on.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
What did you flash that hard bricked your phone? A modem should have been pretty safe to flash. I have flashed a bunch of different ones the worst that ever happened to mine was no service or poor service.
What exactly still needs fixing? No service still? Did you check imei and baseband? Intact, unknown or 0? Will be available till about 7am off and on.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Oh man, I might be sounding like a total noob by now but damn I've never had problems installing custom roms and going back to stock before.
So I flashed a modem that was for my phone and carrier in some thread here and that hard bricked my phone when I rebooted my phone. I tried the sd card method and in the end that worked and I could start my phone but no service or anything which at this point is the least important thing. In that thread of the sd card method it mentions how to flash a bootloader to make the phone not require the sd card (which was requiring it on my phone to start up the phone) and now it's hard bricked by trying that, and the sd card is not making it boot into download or recovery mode at all now.
If only I had enough to buy another phone I would seriously punch this phone repeatedly until nothing was left. I've spent like 2 days on this phone now with about 5 hours not counting sleep of time away from fixing this phone.

Dagobert_ said:
Oh man, I might be sounding like a total noob by now but damn I've never had problems installing custom roms and going back to stock before.
So I flashed a modem that was for my phone and carrier in some thread here and that hard bricked my phone when I rebooted my phone. I tried the sd card method and in the end that worked and I could start my phone but no service or anything which at this point is the least important thing. In that thread of the sd card method it mentions how to flash a bootloader to make the phone not require the sd card (which was requiring it on my phone to start up the phone) and now it's hard bricked by trying that, and the sd card is not making it boot into download or recovery mode at all now.
If only I had enough to buy another phone I would seriously punch this phone repeatedly until nothing was left. I've spent like 2 days on this phone now with about 5 hours not counting sleep of time away from fixing this phone.
Click to expand...
Click to collapse
Are you certain the battery is charged? Should be a question that should be un asked but it does happen. The bootloader you flashed you're sure was for your model and carrier(AT&T vs canadian)? If you flashed the wrong model bootloader then you will need to jtag, If not when I was debricking my phone I had to do a battery pull after each time I wanted the phone to boot with the debrick SD. Are you doing that I don't want you to feel stupid but if you have a lack of sleep and are frustrated simple things can be overlooked. My thought is that If the sd method worked before it should work now especially if you are using the same debrick image. Out of curiosity what model is your phone and carrier?
I wish you the best of luck and hope all works out.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
Are you certain the battery is charged? Should be a question that should be un asked but it does happen. The bootloader you flashed you're sure was for your model and carrier(AT&T vs canadian)? If you flashed the wrong model bootloader then you will need to jtag, If not when I was debricking my phone I had to do a battery pull after each time I wanted the phone to boot with the debrick SD. Are you doing that I don't want you to feel stupid but if you have a lack of sleep and are frustrated simple things can be overlooked. My thought is that If the sd method worked before it should work now especially if you are using the same debrick image. Out of curiosity what model is your phone and carrier?
I wish you the best of luck and hope all works out.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yeah the battery is charged, I've tried the battery on another phone as well. I do pull out the battery and all that, and yeah I know simple things can be overlooked. Which is why I tried again today. Oh well I guess it's just one of those things that just won't work for whatever reason. Anyways, my model is SGH-I747 for AT&T. I even made sure that none of it was the SGH-I747M. Oh well jtag is what it is, I guess I rather pay than have to deal with this problem. Only thing is that I've never done that before and so many people are offering it on ebay and I don't know who to go with, I mean I'm sending my phone to someone with no real guarantee or anything that I will get my phone back. And yeah there's user feedback but that could also mean a thousand fake accounts giving good reviews or friends and family giving good reviews for 1 penny sales. Anyone you suggest I go with? Either on ebay or out of ebay? Thanks for all the help btw.

Everything seems to be going downhill for me right now. My computer will not recognize any Micro SD or SD cards. It will recognize pro duo cards but not any SD or Micro SD card. I tried all my Micro SD cards and SD cards today and none of them are being detected although they do show up in MiniTool Partition Wizard. I even bought another card reader and it's the same thing. So now my computer is being a twat about this. I think I might as well just listen to some Linkin Park and slit my wrists to end it all. But before I do that, anyone know why my PC won't recognize SD and Micro SD all of a sudden?

[Q] SM-T217s - my first ever brick.

Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.

joshuaerda said:
Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.
Click to expand...
Click to collapse
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.

joshuaerda said:
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.
Click to expand...
Click to collapse
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.

254336992952
​
joshuaerda said:
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.
Click to expand...
Click to collapse
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.

IAMRUDYT said:
​
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.
Click to expand...
Click to collapse
same here, I have the rom, but hesitated on the firmware, waiting to see if someone gets the wifi working, not to many developers here for this tablet.

sm t217s
Ok guys. Heres my deal with this TAB. Ive rooted... Unrooted. wipe wipe wipe wippty wipe . WiFi not working. Fixed it with NB8. So here now I sit with:
----NB8 Wifi works---
----TWRP-----
Yup, pathetic i know. I cant even get the supersu to flash. TWRP wont move it over to flash off external sd card. Im not hip to abd plus i heard you leave yourself wide opento visitors when using that.
Ive eye hustled a thread on here that some friends are getting back together to rock it on a custom rom so my fingers are crossed. This tab is so neglected i mayjust go get the 210r. But i really dont want to. So my question is....
Can someone please give me links to files that work with the NB8 stock firmware. Some of the links are outdated after sprint uploaded the new bootloader. We are a small community on this tab so lets stick together on this. I dont think cynogen isgoing to do anything for it. As they concentrate on thier new phone which looks pretty sweet by the way. K im done. Going to wait for help and play with this htc one s
thats been collecting dust.

Rooted
Sent from my SM-T217S using XDA Premium 4 mobile app

[Q] Please help a Noob

OK. I think I've done my due diligence. I've scrubbed the forums for 2 days, I've googled it and I still can't figure out what I'm doing wrong.
Friend gives me this rooted LG OGP. Awsome! Works great! Then AT&T or LG sends an OTA update that bricks it :crying:. Read Aryan1312's sticky thread in this forum and get all pieces together. By now I have the 3.8.1 drivers AND the newest 3.10.1 drivers, LGFlashTool 1.8.1.1023, along with the newest 10P TOT file. I got the Flashtool to stop asking for PW and I think I'm ready to go.
But then . . . Plug my phone in and Device Management doesn't know what to do with phone. Reinstall drivers pack from LG website. Still no dice. Hmm. Phone is in Team Win Recovery Project v2.6.3.0 recovery screen (I guess that's what it's called) and computer doesn't know what to make of it. Hmm.
Maybe I can put it onto a microSD card and copy stuff over to phone? Maybe flash a different ROM through TWRP? Let's try that. I copy files over to the external SD card, put it into the phone, restart phone, hello TWRP, Advanced-File Manager option, WHY CAN'T YOU SEE THE EXTERNAL SDCARD??? Isn't it supposed to be there under /extSD?? It's time to ask for help.
Question: How do I get my Win7 PC to see the phone as a removable drive/external drive/whatever you call it so that I can get this info over?
I know that I have to change Port #'s after Win7 sees the phone. I just can't get there . . . yet.
- What I've tried:
Reinstalled drivers (both versions) and restarted between trying to plug phone in.
Tried installing phone drivers manually. Still doesn't mount as external HD as far as Win7 is concerned.
Called friend to ask his opinion. He doesn't remember and tries to tell me this is why Apple is "better".
Scoured the web to see what to do. Found articles about this same thing happening and all point to Stickied Post on this XDA forum
I did RTFM and am still lost.
---- Sorry for the long post, I just thought that people who wouldn't mind helping would appreciate the extra info.

Drivers
landran said:
OK. I think I've done my due diligence. I've scrubbed the forums for 2 days, I've googled it and I still can't figure out what I'm doing wrong.
Friend gives me this rooted LG OGP. Awsome! Works great! Then AT&T or LG sends an OTA update that bricks it :crying:. Read Aryan1312's sticky thread in this forum and get all pieces together. By now I have the 3.8.1 drivers AND the newest 3.10.1 drivers, LGFlashTool 1.8.1.1023, along with the newest 10P TOT file. I got the Flashtool to stop asking for PW and I think I'm ready to go.
But then . . . Plug my phone in and Device Management doesn't know what to do with phone. Reinstall drivers pack from LG website. Still no dice. Hmm. Phone is in Team Win Recovery Project v2.6.3.0 recovery screen (I guess that's what it's called) and computer doesn't know what to make of it. Hmm.
Maybe I can put it onto a microSD card and copy stuff over to phone? Maybe flash a different ROM through TWRP? Let's try that. I copy files over to the external SD card, put it into the phone, restart phone, hello TWRP, Advanced-File Manager option, WHY CAN'T YOU SEE THE EXTERNAL SDCARD??? Isn't it supposed to be there under /extSD?? It's time to ask for help.
Question: How do I get my Win7 PC to see the phone as a removable drive/external drive/whatever you call it so that I can get this info over?
I know that I have to change Port #'s after Win7 sees the phone. I just can't get there . . . yet.
- What I've tried:
Reinstalled drivers (both versions) and restarted between trying to plug phone in.
Tried installing phone drivers manually. Still doesn't mount as external HD as far as Win7 is concerned.
Called friend to ask his opinion. He doesn't remember and tries to tell me this is why Apple is "better".
Scoured the web to see what to do. Found articles about this same thing happening and all point to Stickied Post on this XDA forum
I did RTFM and am still lost.
---- Sorry for the long post, I just thought that people who wouldn't mind helping would appreciate the extra info.
Click to expand...
Click to collapse
1. Is the first pic with the phone connected to the pc?
2. If yes, have you tried to manually update drivers, while in device manager
3. I know that this is going to sound funny but have you tried a different USB port. The reason I ask is I had the same problem LG Optimus M and the phone was down for a couple of days. I tried everything and was about to call it quits but for some reason when I changed USB port the computer saw the phone and I was back in business. I am not saying that will 100% work but it is worth a try.

TheMighyLoki said:
1. Is the first pic with the phone connected to the pc?
2. If yes, have you tried to manually update drivers, while in device manager
3. I know that this is going to sound funny but have you tried a different USB port. The reason I ask is I had the same problem LG Optimus M and the phone was down for a couple of days. I tried everything and was about to call it quits but for some reason when I changed USB port the computer saw the phone and I was back in business. I am not saying that will 100% work but it is worth a try.
Click to expand...
Click to collapse
Yes I have. I think I did figure it out though. I put the device into "download mode" and my computer could see, and communicate, the phone.
To put my phone into "download mode" I did the following:
I connected the phone to the computer physically with USB cable
I turned phone off.
I pressed BOTH volume buttons and held the power button while phone was attached to computer.
With BOTH volume buttons still pressed, I released the power button.
The phone screen was black with a little dialog box in the middle saying "download mode"
I could then use LGFlash Tools to flash Stock AT&T TOT file back into phone. Took 519 seconds to complete the stock flash.
New problem arises, After flash, I do NOT have any 3G/4G signal. I can use the phone to make and receive phone calls and text messages, but I CANNOT use mobile internet unless I have it connected via wifi.
I installed the Debloated ROM and "tried" to flash 980 Baseband.zip but when I tried to install baseband, CWM gave me a permission error and said install failed. I haven't been able to use mobile internet since. Any help???
-- Again, sorry for the lengthy post. I figured that I might not be the only person who has gone through this. I see a lot of viewers to the thread so I think other people might be having same troubles as me.

landran said:
New problem arises, After flash, I do NOT have any 3G/4G signal. I can use the phone to make and receive phone calls and text messages, but I CANNOT use mobile internet unless I have it connected via wifi.
I installed the Debloated ROM and "tried" to flash 980 Baseband.zip but when I tried to install baseband, CWM gave me a permission error and said install failed. I haven't been able to use mobile internet since. Any help???
-- Again, sorry for the lengthy post. I figured that I might not be the only person who has gone through this. I see a lot of viewers to the thread so I think other people might be having same troubles as me.
Click to expand...
Click to collapse
It sound like you need to manually set the APN. Do a Search for your provider.. ie AT&T T-Mobile the setting is under Network/Tethering & Networks/ Mobile networks/ Access point name/ Hit Menu Button and New APN

You are the MAN / WOMAN!! Thanks for the help. That fixed it.
For posterity and to help another "noob" stuck in my case later (maybe months down the line)
This is what I've done up until now in plain text:
Used LGFlashtool to flash AT&T stock "10k" build
Went into Settings Icon>General>Developer Options>check off "USB Debugging"
Used "E980 Universal Root" from forums to gain Root access (verified with "Root Checker" from Playstore)
Used FreeGee to get TWRP recovery installed (rebooted into recovery with "QuickReboot" from Playstore).
Used TWRP recovery to install "E980 Baseband.zip" from forums
Factory Reset
Setup new phone and input APN settings (located in Settings Icon>Networks>Tethering & Networks>Mobile networks>Access point names>Menu button "New APN"/input carrier values/Menu button "Save")
Now that I know how to get back here, I'm going to scrap the stock ROM and try to do this whole process with a custom ROM. . . and another flash-a-holic is born. The learning journey continues.

Welcome:beer:
*KCCO*2SHAYNEZ*E980*

That is what this forum is for.
I have been helped out a lot from the group and I just thought it was time to pay it back. It is good to hear that you got it up and running. But one last word of advise BACK UP, BACK UP, BACK UP, and when that is done, back up the back up to the computer.