Develop Bugs

MIUI on my evo

Hey guys im having a problem getting MIUI to boot on my phone I did the format all and flashed it and it just bootloops what should I do
Sent from my PC36100 using XDA App

You need to properly wipe data, cache and dalvik cache. Just flashing the format all is not enough to wipe everything.

ClockworkMod Recovery?
Are you not able to hboot?
If you can, I'd factory reset and wipe dalvik as well.
You might take a look at SalvageMod 1.0 as well. Fewer issues than the stock out of the box ROM.

[email protected] said:
Hey guys im having a problem getting MIUI to boot on my phone I did the format all and flashed it and it just bootloops what should I do
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Find the clear-temp-files.zip and flash that after flashing the format-all.zip. Then flash the rom. This is especially important if you're coming from a sense rom. Also do not restore system data or system apps, if you use TB. Just restore user apps and data.

Clockwork doen't wipe .. unless they fixed it .. IDK I don't use it because it wouldn't wipe all the data, then I would get stuck in a boot loop. Flash Amon Recovery, wipe all except system, then flash .. ENJOY!!

i have tried everything you guys have said and it still isnt working is there only one file i have to flash?

[email protected] said:
i have tried everything you guys have said and it still isnt working is there only one file i have to flash?
Click to expand...
Click to collapse
Are you flashing a custom kernel with it?

No which one would you suggest I use
Sent from my PC36100 using XDA App

[email protected] said:
No which one would you suggest I use
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Savaged-zen is supposed to work nice. I'm rocking Tiamat, and its pretty nice.

[email protected] said:
i have tried everything you guys have said and it still isnt working is there only one file i have to flash?
Click to expand...
Click to collapse
What recovery are you using?

ok ill have to check it out and im using RA 2.3

Yea, for AOSP, I strongly recommend Tiamat. Been using it a couple days and great performance and battery life. SBC and No-SBC versions availible.

should i use a GB version of it or the froyo

I would say go gingerbread version.

[email protected] said:
ok ill have to check it out and im using RA 2.3
Click to expand...
Click to collapse
I am using Amon and this is method that worked for me:
1. Wipe Data/Factory Reset
2. Wipe Dalvik-Cache
3. Flash Miui
4. Reboot
Maybe try it one more time. Maybe bad download of Miui - are you trying the most recent Miui?

well i flashed an older version and it worked but when i tried to flash the update it stoped working

teh roxxorz said:
I would say go gingerbread version.
Click to expand...
Click to collapse
So you would run a gingerbread kernel for a froyo based rom?
FAIL!

Flashing it in the same method?

sultan.of.swing said:
So you would run a gingerbread kernel for a froyo based rom?
FAIL!
Click to expand...
Click to collapse
Knowingly, I wouldn't. As I stated before, I've never used MIUI. Seeing as its Froio based, you need to run the Froyo based. Though Gingerbread kernels CAN run on Froyo based roms.

Use Amon_RA, wipe chache, flash phone with MIUI again, wipe chache one more time. That is what I did last night because I was getting stuck at boot animation screen. I did not flash kernel because I had ziggy already.

[Q] ROM install faillure

When i install a ROM they install but when i reboot my phone nothing happens some app icons change but that's it Please help
see page 2
Rooted Epic 4g EC05 Stock rom

You have to provide more information so we can help you out. What ROM are you installing? What is your current recovery? Are you using the purp 3.1.0.1? Did you wipe System/data, cache partition, and Dalvik Cache 3x? We can get you straightened out. Just give some more details.
Sent from my SPH-D700 using XDA Premium App

all ROM's do it but im trying to convert over to ext4 and run syndicate ROM . Yes i have wiped data/factory restore and flushed dalvik 3x every time... cwm recovery v2.5.1.0

you cant install srf 1.2 on that recovery.. you need to upgrade to 3.1.0.1, cwm2x does not support ext4

You need to update clockwork to 3.1.0.1. You're using an outdated recovery.
http://forum.xda-developers.com/showthread.php?t=1115999

oh .... how do i update i tried to flash with ROM manager but it obviously didn't work

samsungepic4g said:
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
Click to expand...
Click to collapse
The link above ur post has a flashed zip.
Sent from my SPH-D700 using XDA Premium App

samsungepic4g said:
oh .... how do i update i tried to flash with ROM manager but it obviously didn't work
Click to expand...
Click to collapse
Rom manager doesn't really work for epic. You have to turn off your phone and then hold camera, vol down and power to get into your recovery. Check qbking's videos. They will make a lot of sense. You may want to odin your phone and restart. I'm not sure how much craziness you may have started. Backup major stuff with Titanium and everything will pretty much be normal without major loss.

Wow, its been a while since I was that far back on recovery. Let me check TheRoot's link...EDIT..yup TheRoot's link has a flashable version of the 3.1.0.1 recovery that will get you right where you want to be to flash all of the current batch of ROMs. PM me if you get stuck and I will go step by step
Sent from my SPH-D700 using XDA Premium App

After you finish, download ACS updater and it'll give you the goodness you were looking for in Rom Manager. There's also a support thread in Apps.

hey tanks to every 1 who helped i flashed my epic to cwm recovery 3.1.0.1 purple now its going to be a pain in the but to convert to ext4

samsungepic4g said:
hey tanks to every 1 who helped i flashed my epic to cwm recovery 3.1.0.1 purple now its going to be a pain in the but to convert to ext4
Click to expand...
Click to collapse
If you're flashing SRF 1.2, don't worry. It's built in. Just flash the rom, journaling on and a kernel and you're on your way. Use the thanks button as well, please.

Ok im running sfr on my epic looks amazing and ext4 and set cpu 1200mhz combined is amazingly fast thanks to all
Sent from my SPH-D700 using XDA App

ECO5 help

I am new to rooting the Epic 4g, but not new to rooting in general. I had an HTC Hero (cdma) and am now on the Evo 4g. I understand all the terminology associated with rooting/flashing, etc, however, the Epic is a little different. I just rooted my wife's ECO5 Epic using the most recent One-Click method and everything worked great. The first thing I did was make a backup. I would like to flash Syndicate Frozen 1.2 but am a little confused on this whole files system jargon as it isn't existent or an option on the EVO. My questions are as follows: If I flash Syndicate Rom 1.2 and the Genocide kernel, I understand that it will convert my files system to Ext4 automatically, but if for some reason I don't like it, can I simply recover my backup in CWM and go back to stock? Or do I need to ODIN back to stock and reset up my whole system as I had it prior? I see that the One-Click 3.1.0.1 method I used has dual file system support. What does that all impact? Just new roms or my current ROM. I have done a bunch of research but haven't been comfortable in my findings enough to start flashing. Can someone please clarify this for me?

I believe there are scripts available to convert between the two file systems, in both directions.
That said, EXT4 is the way to go imo. Don't be shy about it. Sfr 1.2 is top rom in my book. Do take the time to go get the other goodies as well. Hotspot hack, and the supercharger script. It's all amazing when it comes together.
Sent from a secret underground bunker

Clockworkmod 3.1.0.1 does not restore filesystem type (ext4, rfs). You can either odin back to rfs or flash a .zip in Clockworkmod. Also, if you have access to odin, there is NO WAY you can brick your phone. It will ALWAYS be recoverable.
(unless you intentionally brick it, there are ways)

So just to clarify, I must ODIN back to stock and thenin recover my backup, which is just stock? Or, can my stock backup run on Ext4?
Sent from my PC36100 using XDA App

legasus233 said:
So just to clarify, I must ODIN back to stock and thenin recover my backup, which is just stock? Or, can my stock backup run on Ext4?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Best to restore first and do the conversion, but there is no reason you can't restore after. Although I usually do advanced restore data between file systems myself.
Sent from my SPH-D700 using Tapatalk

Will the completely stock rooted rom run on ext4? Or is my backup useless unless I convert back to rfs file system?
Sent from my PC36100 using XDA App

legasus233 said:
Will the completely stock rooted rom run on ext4? Or is my backup useless unless I convert back to rfs file system?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
If I remember right, stock runs on ext4. As long as you have a different kernel. Stock kernel does NOT run on ext4.

legasus233 said:
Will the completely stock rooted rom run on ext4? Or is my backup useless unless I convert back to rfs file system?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
That is 2 different questions. One no stock kernel is RFS. Two, restore as I mentioned before, advanced restore data only and you will be fine. You may have to set up your accounts but that is about it.
Sent from my SPH-D700 using Tapatalk

I think i need to ask the question differently. Right now, all that I have done since getting her the phone is complete the One-click root 3.1.0.1. I then made a backup. I haven't done anything else or made any changes. If I now flash Syndicate 1.2 frozen but want to return to my backup, are you suggesting I don't need to ODIN back to stock, but simply advance restore in recovery? Sorry for being an idiot about this guys, but like I said, I am an Evo flashaholic and its taking me some getting used to speaking Epic language! Plus, I would hate to flub something up since its my wife's phone!
Sent from my PC36100 using XDA App

I think what I am looking for is step by step what is the shortest easiest way to "undo" a new rom flash and go back to exactly the way it was before. On the Evo, a nandroid backup is gold and does just this, but I am finding that on the Epic this isn't as simple
Sent from my PC36100 using XDA App

I would not start with SRF 1.2. Because you also need to flash a kernel. Start by flashing a ROM that comes with a kernel. If it is for someone else keep it simple like ReRFS ROM. I would not even do EXT4 unless you are sure you have journaling enabled. The first freeze, drop or battery pull will cause Force Closes galore. Unless you are planning on supporting that phone constantly, keep it simple. And yes most times restore works fine without goling back to Odin.
Sent from my SPH-D700 using XDA App

legasus233 said:
I think what I am looking for is step by step what is the shortest easiest way to "undo" a new rom flash and go back to exactly the way it was before. On the Evo, a nandroid backup is gold and does just this, but I am finding that on the Epic this isn't as simple
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
90% of the time it will restore just fine.
Sent from my SPH-D700 using XDA App

Yes, I agree, but "if" I flash an ext4 rom/kernel and then try to recover my stock rooted backup from cwm, will it work since stock is rfs?
Sent from my PC36100 using XDA App

legasus233 said:
Yes, I agree, but "if" I flash an ext4 rom/kernel and then try to recover my stock rooted backup from cwm, will it work since stock is rfs?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Nand doesn't care what the file system is so yes. The issue you may run into is incompatibilties between ROMs and data. So go ahead. I run both nands and Titanium backup just in case of an incompatibility so I can go between froyo and GB.
Sent from my SPH-D700 using XDA App

kennyglass123 said:
Nand doesn't care what the file system is so yes. The issue you may run into is incompatibilties between ROMs and data. So go ahead. I run both nands and Titanium backup just in case of an incompatibility so I can go between froyo and GB.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
The answer is no. Complete stock kernel doesn't support ext4. He would have to flash genocide or twilight kernel.
sent from my cm7-ified epic

ugothakd said:
The answer is no. Complete stock kernel doesn't support ext4. He would have to flash genocide or twilight kernel.
sent from my cm7-ified epic
Click to expand...
Click to collapse
Doesn't matter if he did an advanced data restore. It does not restore the kernel.
Also I am not sure it restores the kernel on a full nand restore. Did one recently and none of the kernel mods restored. Had to reflash my kernel. I thought 3.1.0.1 was supposed to backup and restore the kernel.
Sent from my SPH-D700 using Tapatalk

kennyglass123 said:
Doesn't matter if he did an advanced data restore. It does not restore the kernel.
Also I am not sure it restores the kernel on a full nand restore. Did one recently and none of the kernel mods restored. Had to reflash my kernel. I thought 3.1.0.1 was supposed to backup and restore the kernel.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
That doesn't make sense, if it didn't restore kernel, then how can some people nandroid between cm7 and eh17 every so often? And yeah, but I think he was talking about restoring the ROM, not his data. I could be wrong.

ugothakd said:
That doesn't make sense, if it didn't restore kernel, then how can some people nandroid between cm7 and eh17 every so often? And yeah, but I think he was talking about restoring the ROM, not his data. I could be wrong.
Click to expand...
Click to collapse
I am confused as to what the OP wants then. I thought he wanted to flash a ROM and if he didn't like it restore back.
As for CM7 to EH17 and back, simply flash and advance restore data or use Titanium Backup. I backed up Hurricane after flashing a new kernel and adding some mods. Upon restore later the first thing I noticed was the mods missing. This is with 3.1.0.1 Odin'd in. Had Bonsai recovery which does back up kernel image as well but would not flash other EH17 Roms for some reason.
Sent from my SPH-D700 using XDA App

kennyglass123 said:
I am confused as to what the OP wants then. I thought he wanted to flash a ROM and if he didn't like it restore back.
As for CM7 to EH17 and back, simply flash and advance restore data or use Titanium Backup. I backed up Hurricane after flashing a new kernel and adding some mods. Upon restore later the first thing I noticed was the mods missing. This is with 3.1.0.1 Odin'd in. Had Bonsai recovery which does back up kernel image as well but would not flash other EH17 Roms for some reason.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
I'm confused. The op wanted his phone to be " if for some reason I don't like it, can I simply recover my backup in CWM and go back to stock" which I assume is complete stock, which means the ROM and not his data.

ugothakd said:
I'm confused. The op wanted his phone to be " if for some reason I don't like it, can I simply recover my backup in CWM and go back to stock" which I assume is complete stock, which means the ROM and not his data.
Click to expand...
Click to collapse
He further confused me later on but going by the OP, then you are right and the best bet at that point is to Odin a prerooted stock ROM like EC05plus to save a step and then restore everything if he didn't like SRF 1.2 and Genocide.
Sent from my SPH-D700 using XDA App

[Q] Need help with EC05 Froyo and CWM 2.5.1.0

Hey guys, I've been running into a ton of issues. Basically, all I want to do is get to the point where I can flash custom ROM's onto my Samsung Epic 4G. I am on Stock Froyo EC05 Rooted and have ClockWorkMod 2.5.1.0! I understand that the best way to go about things is to first update the Clockworkmod to 3.1.x.x but what is an easy way to do this from 2.5.1.0? Do I have to go through the entire root process again just to update clockwork or do I have to remove my root entirely and start from scratch? What's the best way to go about this and how do you do it?
Hope to hear what you guys think.

gooch1025 said:
Hey guys, I've been running into a ton of issues. Basically, all I want to do is get to the point where I can flash custom ROM's onto my Samsung Epic 4G. I am on Stock Froyo EC05 Rooted and have ClockWorkMod 2.5.1.0! I understand that the best way to go about things is to first update the Clockworkmod to 3.1.x.x but what is an easy way to do this from 2.5.1.0? Do I have to go through the entire root process again just to update clockwork or do I have to remove my root entirely and start from scratch? What's the best way to go about this and how do you do it?
Hope to hear what you guys think.
Click to expand...
Click to collapse
Wow your outta date boy. Anyways the newest cwm is 5.0.2.7 I have the acs recovery5 zip so ill upload that for you simply flash the zip and reboot back into cwm and bam there it is. Once that's done your good to go!
http://db.tt/n15N2E9q
Sent From My Cyan Samurai

As for custom roms just go into development and pick on that you think you'll like read the included list and pick from that. Id suggest checking out legendary 2.2 as a starting point if you don't like the theme you can always flash one. As for a custom kernel check out the samurai kernel from earthbound. Make sure you get the TW.BML version not mtd.
Sent From My Cyan Samurai

Yeah, I've checked out a few Rom's and I know what I'm looking for, I just want that ClockworkMod updated. Also, for custom ROM's, is it better to have the EXT4 filesystem instead of RFS? which clockwork version will automatically covert it to EXT4?

gooch1025 said:
Yeah, I've checked out a few Rom's and I know what I'm looking for, I just want that ClockworkMod updated. Also, for custom ROM's, is it better to have the EXT4 filesystem instead of RFS? which clockwork version will automatically covert it to EXT4?
Click to expand...
Click to collapse
The ROM does the conversion.... and EXT4 is for speed but RFS is more for reliablity not to say the ext4 isn't safe but its not as reliable as RFS. But it safe to use but I know very few people losing data because of undervolting but that was the only thing that caused it. However you need rfs then I can give you the zip to flash and convert it.
Sent From My Cyan Samurai

Rfs, because its still considered more stable. Ext4 still has stability issues, although considered faster.
Sent from my SPH-D700 using xda premium

Find cwm 5 (not the acs version) and then flash it. The you can get mtd roms like cm7.
Sent from my SPH-D700 using XDA App

Ok. Also, I made a complete backup with Mybackup Pro to my SD card and it works great! However, would it still restore everything If I'm on a different filesystem? I was also wonderung, since I'm on stock froyo, are you sure I can upgrade CWM 2.5.1.0 straight to 5.x.x.x? I heard there might be some issues with that.
Another thing, What ROM do you recommend to be the best. I do want certain features and was looking at the CleanGB and the Legendary ROMS. I basically want one that is fast, barely any bloatware, has the 3d app drawer, and the CRT animation. I also want it to have loopback so I could put Backtrack 5 on my phone just in case I need to use it.

Recovery is independent of the software version. I had cwm 5 on froyo before.
Sent from my SPH-D700 using XDA App

gooch1025 said:
Ok. Also, I made a complete backup with Mybackup Pro to my SD card and it works great! However, would it still restore everything If I'm on a different filesystem? I was also wonderung, since I'm on stock froyo, are you sure I can upgrade CWM 2.5.1.0 straight to 5.x.x.x? I heard there might be some issues with that.
Another thing, What ROM do you recommend to be the best. I do want certain features and was looking at the CleanGB and the Legendary ROMS. I basically want one that is fast, barely any bloatware, has the 3d app drawer, and the CRT animation. I also want it to have loopback so I could put Backtrack 5 on my phone just in case I need to use it.
Click to expand...
Click to collapse
Legendary is faster cleangb is stock really and is on rfs..... and ur fine just flashing my upload... as for the apps don't use that for your apps bringing over apps from different roms escpecially froyo to gb is dangerous and I recomend you just download the apps again from the market. Or you can nandroid and advanced restore the data....
Sent From My Cyan Samurai

I did check out the thread on the newest ClockWorkMod 5 but it said that you should have 3.1.x.x, will this work with 2.5.1.0 to 5.x.x.x?
Update: I successfully flashed CWM 2.5.1.0 to 5.0.2.7! Now when I flash a new ROM, is there only one Zip file to flash or do I need to flash a ROM and a new Kernel/Modem?

Not the slightest clue but I have the 3.1 purple zip you can flash if you do need to do that.
Sent From My Cyan Samurai

Just flash a rom.
Sent from my SPH-D700 using XDA App

Cwm 5 is runs on rfs ,and froyo stock is rfs system based, so u really should haven't anything to worry about. The only time u start running into big problems is when u convert to ext4 and especially mtd.
Sent from my SPH-D700 using xda premium

gooch1025 said:
I did check out the thread on the newest ClockWorkMod 5 but it said that you should have 3.1.x.x, will this work with 2.5.1.0 to 5.x.x.x?
Update: I successfully flashed CWM 2.5.1.0 to 5.0.2.7! Now when I flash a new ROM, is there only one Zip file to flash or do I need to flash a ROM and a new Kernel/Modem?
Click to expand...
Click to collapse
If you want a better kernel then yes go ahead and look at the samurai or shadowkernel..... also as fo the modem ill give you the flashable to update ur modem to ei22
http://db.tt/9icy8xnd
Sent From My Cyan Samurai

Gooch, when ur checking out about the rom, the developers will usually tell u if it is both the rom and kernel or just the rom. Just pay close attention to the updated changelogs as well.
Sent from my SPH-D700 using xda premium

androidmaster1 said:
Cwm 5 is runs on rfs ,and froyo stock is rfs system based, so u really should haven't anything to worry about. The only time u start running into big problems is when u convert to ext4 and especially mtd.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Wrong filesystems have nothing to do with cwm...... that's part of the rom....
Sent From My Cyan Samurai

androidmaster1 said:
Cwm 5 is runs on rfs ,and froyo stock is rfs system based, so u really should haven't anything to worry about. The only time u start running into big problems is when u convert to ext4 and especially mtd.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Totally wrong on both parts.
Sent from my SPH-D700 using XDA App

Ok guys, I got it working! I put on Legendary ROM 2.2 and it's awesome! My data backup worked perfect and things run way smoother. Thanks for all your help, you guys definitely put me on the right track.

Use cwm not acs... acs is great but we have an officialy supported cwm for a reason. I strongly recommend you use our official cwm 5.0.2.7 and not acs
Sent from my SPH-D700 using Tapatalk

sorry deeply sad here!

sorry guys can't make mods for a long time anymore my phone won''t boot into CM7 i dont know why sorry for this!
greetings safariking

what happened? bricked?

voetbalremco said:
what happened? bricked?
Click to expand...
Click to collapse
i don't know can boot into my old mods but if i want to install normal CM7 than stuck on bootscreen en have done full whipe en evrything

what if you go back to stock, wipe EVERYTHING, also SD, and format system etc so its a really FULL wipe, and then try to flash cm7 again..?

voetbalremco said:
what if you go back to stock, wipe EVERYTHING, also SD, and format system etc so its a really FULL wipe, and then try to flash cm7 again..?
Click to expand...
Click to collapse
i will try it android 2.3.5 downloading now than flashing en than formatting the sytem and installing cm7 again i hope it will work

also backup a stock rom, when its clean installed, and save backup on your pc, so you always have a clean backup of a stock rom, then flash cm7

voetbalremco said:
also backup a stock rom, when its clean installed, and save backup on your pc, so you always have a clean backup of a stock rom, then flash cm7
Click to expand...
Click to collapse
stock rom needs to be in ext4
Sent from my GT-S5830 using xda premium

spacecaker said:
stock rom needs to be in ext4
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Yeah but if you flash back to Stock Rom using Odin your filesystem is back to RFS

Not necessarily, the /data and /cache partitions aren't touched by Odin.

Darkshado said:
Not necessarily, the /data and /cache partitions aren't touched by Odin.
Click to expand...
Click to collapse
Ohhhhhhhh
I would Click Thanks but:
Sorry, you are limited to 8 thanks per day
Click to expand...
Click to collapse

The solution to that is to format within recovery mode. If that doesn't work, dd RFS-formatted empty /data and /cache back into place. Let me know if someone needs those.