hello, i am currently working on a honeycomb port for our htc desire hd
i have a lot of things working now for honeycomb
boot and recovery with cwm 2.5.1.3
touchscreen
charge status led
notification led
hardware keys
adjust screen brighness
vibrate
sd-card mounting
browser
email
market
gallery (although it still crashes)
does anybody know what steps i need to take to invoke wifi.. and maybe sensors ?
your help is apreciated
bump... late i know....
Related
I have a G2 running CyanogenMod 6.1rc1. It was working wonderfully until this morning, when it stopped displaying any image/video on the screen. The backlight still works, and I can unlock it (and turn on the LED flashlight) by memory, so the touch sensor is working, but I get no video at all (even in hboot/usb-fastboot).
I talked with a couple of guys in #cyanogenmod, and they say it's probably a hardware problem (damage to screen's ribbon cable), and needs to be RMA'd. I'd like to get CM off of the phone before sending it off, just to be on the safe side. Is there a way to do that without being able to see the phone screen (i.e., via ADB and/or specific keypress sequence for Clockwork Recovery)?
Thanks in advance!
Hi,
i got my Desire rootet ( S-OFF, Clockworkmod 3.0.5, PirateRum ( based on Cyanogenmod 7 nightly )
my hboot is: 0.93.001
PVT1.
SLCD
Now.
If anyone call me, the screen goes black, normally.
If my partner ends the call, the screen wont wake up from this "sleep" mode.
If i type the power button the buttons for search and home become bright...
I think its a bug with the SLCD Screen... anyone got this problems to?
Dude,
The desire has a proximity sensor, so when you answer a call and put it by your ear, it switches off the screen.
Perhaps there is a bit of a bug in that rom, so it forgets to switch the screen back on when the call ends.
I highly doubt its a hardware issue.
Sent from my HTC Desire using XDA App
Sometimes it works, sometime it dont works.
This Desire is 2 Weeks old... Very sick. but thanks
MULTIPLI said:
Hi,
i got my Desire rootet ( S-OFF, Clockworkmod 3.0.5, PirateRum ( based on Cyanogenmod 7 nightly )
my hboot is: 0.93.001
PVT1.
SLCD
Now.
If anyone call me, the screen goes black, normally.
If my partner ends the call, the screen wont wake up from this "sleep" mode.
If i type the power button the buttons for search and home become bright...
I think its a bug with the SLCD Screen... anyone got this problems to?
Click to expand...
Click to collapse
Hi,
I have exactly the same problem with my Desire SLCD, i tried to go back to stock RUU but nothing changed
If someone got a solution.
Hey Hey i have the solution!
I fixed the problem of blank screen by cleaning dust between screen and earpiece (especially at left, where is the proximity sensor).
You can clean it like me with an air duster spay or/and with a vacuum cleaner
It works well now!!!
Enjoy!!!
how to?
i am interested
guys, check pls in what type of network screen stays black 3g or gsm,
this issue is after call only or in regular use from time to time?
this is know problem on desire, there can be falutly mobo, if your screen dont react and stays black - only battery unplug helps and this happends when your phone trying to switch between network GSM to 3G/HSDPA or from 3g to gsm
was having this issue long time + self rebooting and sent by desire to repair, they replacing mobo and know everything work fine for me,
proximity senzor works good in many cases, you can download apps to test you sensors if the proximity sensor react correctly and changing values then is not broken and pro problem is elsewhere,
face this problem on my SLi9003 and no one answer my question
This worked for me…. Finally
sh7adeh said:
face this problem on my SLi9003 and no one answer my question
Click to expand...
Click to collapse
I'm having the same problem on my Atrix HD. This fixed it. There's an Xposed module called App Settings. If you don't know what it is Google it. I looked up my phone app, dialer app and com.android.incallui in the App Setings module and selected the setting 'Show when locked'. ( you must click the little floppy disk icon to save the setting) this shows the phone and dialer ui's o er the lock screen, but still allows the proximity sensor to turn the screen off when it's to my head
Is this a known bug?
When I use the power management widget and toggle the screen brightness to the lowest. Then when I go to stand-by (by clicking powerbutton or automaticly) and try to activate the phone again the screen stays black (touch buttons light up but I can't use them).
I have to take out the batterie and reboot to get the screen back...
I'm so happy to see this.
I have exactly the same problem. My Wildfire S arrived this afternoon. I used it without any problems until about 22.30, then all of a sudden it wouldn't get out of standby anymore. The only way to get it working again is indeed by removing the battery for a second.
I did a factory reset (through the general phone menu) and now the problem has disappeared, but it could come back any second.
Other people experiencing the same problem?
This is a phone bought in the Netherlands where I live by the way, the black Wildfire S.
I had the same problem.
I had my wildfire s mount to usb... and using the navigon software while driving... then suddenly went to black screen with the keys activated.
I tried to enable the screen but with no luck.
When I unplugged the usb...I push the power button... and suddenly it came back to normal.
!!
very strange.
well... I found a sort solution for this.
If you do what you said.... the only way to enable it again is to plug a usb...and unplugged it.
!!!!!
The bug starting when we enable the lowest brightness!!!!!!!
I'm having the same problem. If you don't set the brightness to the lowest, it won't happen. So, this will be consideration between stability and use duration
Just the Backlight is turned off.
I have the same problem. Use an external light source and bring light to your wildfire S and you'see it is still alive. If you are able to find your brightness settings using the flashlight, increase it and you will have your old display again... It is definetly a bug.
Hi,
so any news on this bug or whether htc is doing something about it?
Just got my WF S with the most recent software and still has this bug which is very annoying. Would be great to be able to use lower backlight for nights/less battery!!
UPDATE: using continuous lightness, I found that whenever I choose light lower than 12% it stays dark and has the bug, please HTC do something about it!!!
Has this been fixed in a custom rom or does it presist in all roms?
I had it on original and custom (CM7.2) ROMS.
Think this is general bug, too bad. or someone does NOT have this bug??
I have this bug too. But u can Try to Pull the ring in the middel, Then the Screen shoudl appear again.
I do not have this bug.
Stock European ROM 2.3.5, jikantarus OC Kernel, BL unlocked and rooted
I have the CyanogenMod 9.1.0 Rom
But now the hardware button light dosent work, The light is always off. Where are the settings? Or what can i do?
alex k said:
I have the CyanogenMod 9.1.0 Rom
But now the hardware button light dosent work, The light is always off. Where are the settings? Or what can i do?
Click to expand...
Click to collapse
By the way , That Light is really a Battery Drainer . If you want to turn it on just use Automatic Brightness on the Display setting then light shows up .
I Know.
I installed CM9 again and it work. I think its maybe when i get in the recovery mode. after this the lights dosent work
i'm porting a sense ROM, and like InsertCoin ROM the charger light lights up when i open the lid then close it... a touch on the small notification bar solves the problem, but i'm trying to fix it.... how??
logcats: The problem: http://pastebin.com/A2SVmqq2
The solution: http://pastebin.com/L1t22857