hello every one me again with one of my qwestion.. sorry to be a problem to all of you,,
but can any one help me out? i was trying to do a radio update to my evo
at this moment im on 2.15.00.11.19 but i want to take it down to 1.39.00.05.31 or evo.2.05.00.06.10 but every time i flash the zip file and reboot .. than i can see the phone is loading the new radio and strangely i get the 6 short burst vibrations during the point where theres the phone and the green arrow over it . and when i go to see if anything has changed . the radio still the same.. any help please?
any one? please
Related
hi all,
i have a problem with my hermes (cingular 8525) herm 100.
when i start up, i got, on the red lines, all the values except R NONE and G NONE.
the OS start up with no problem but no signal.
i tryied to load new radio with memory card but it stops around 20% and stay there still.
no problems to load a new ROM.
what can i do with it??
please someone help me!
it sounds like you screwed it up by flashing it wrongly , put it in bootloader mode and try flashing the carrier rom you had originally for your device.
thank you for your answer...
but i have to go back with the spl as well?? can you, PLEASE, explain me how to do it??
i am not that good in it!!
mickscores said:
thank you for your answer...
but i have to go back with the spl as well?? can you, PLEASE, explain me how to do it??
i am not that good in it!!
Click to expand...
Click to collapse
if its hard spl i believe its perminant. if you re-flash the carrier rom it'll reset the os and radio back to stock settings so you can start again. id try that before looking into anything else
what does makes me think is about the red line at the start up gives me NONE and not NO GSM...it's a bit different from the other kind of brick.
i will try to put again the original setting by ATT and i will let you know..
cross the fingers for me!
I download the file and I try 2 different methods:
1 - upgrade via Pc thru acrive sync, it get's stucked on 12% and then ERRON
2 - upgrade via SD, it get's stucked at the same percentage when is suppose to write GSM
suggestion : shoud I try to program without radio?
hello this is my first post in this forum and I hope you accept me as friends on this section of HTC Touch Diamond
.. I have a HTC Touch Diamond P3700 ( new) and since yesterday he cannot be Started on .. and I tried several solutions (reset ....) but no result
Could you provide me a solution Please
My Greetings
Aziz
Nice use of font colors. Unfortunately the same cant be said for your phone. Whats your location and from which (country) did you buy your touch diamond from
Just be patient and listen ayyu3m to explain you and he will help you 100%.I have more worst problem than u have
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards
newlead said:
sorry i was not here for yesterday
im from morocco
and the fone is from : SFR France original and made in taiwan
thanks a lot my friends
i wait your repley
regards
Click to expand...
Click to collapse
Okay. So what exactly did you do or what exactly happened to your phone?
man did ya try to charge it? maybe the bettray is dead and can ya load the boot screen u know just press the down volume button and reset see if u can see the three colors screen if its then dont worry ... worst thing is just re-flash the rom PM me for extra help buddy
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
lexxa v said:
I have the same problem with my phone after i tried to update rom.
I flashed hardspl 1.40.OliNex and then Diamond_Radio_1.00.25.07 ...everything ok until i tried ruu_diamond_orange_ro_1.37.70.1_radio_signed_diamond_52.33a.25.17_1.00.25.08_ship.
Now it only shows an image with orange and
r: 1.12.25.19
g: 52.60.25.33U
d:1.93.00.00
and nothing else since yesterday... I can get it to bootloader tricolor screen but that's all cause no matter what i try to flash it stops randomly at X% and get error update. The only difference was Radio_1.12.25.19 that seemed to work. Hard reset doesn't work either cause i get the same start image with orange and that's all.
Click to expand...
Click to collapse
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
ayyu3m said:
and pls tell me where you bought ur diamond from and if you know the stock rom which shud be in ur device.
even if u dont know the answer to 2nd question tell me where you bought ur phone and ur country
Click to expand...
Click to collapse
I live in Roumania and bought the phone from someone and i don't know where did he get it from... but when i tried the official htc suport they said that my phone was made for Czech Republic and that's why my ROM update doesn't work...
The answer to second question is that i don't know
Can someone help me please? I don't know what to do now...
Btw the person from whom you bought the device is a resident of Romania?
Yes, he is.
okay can you go into bootloader mode and tell me everything on the screen
DIAM100 MFG 64G
SPL-1.40.OliNex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVT v0x32
Upgrade ROM code error
Please try again
USB
thankx. thats all i need for now. let me try to come up with a rom for you...
btw did you have any carrier logo before you ran into this problem...i mean like instead of the orange logo did you have any vodafone logo or just the htc logo during start up
AND do you have a front facing camera for video calls?
I had only the htc logo at start-up and i do have a video camera front facing.
Okay i found your stock ROM.
Do exactly as i say....
go to this link and scroll down to bottom...
http://www.htc.com/europe/SupportDownload.aspx?p_id=133&cat=2&dl_id=2
when you go to the bottom of the page, you will be requested to enter ur SERIAL NUMBER which you just found under your battery.
Enter and press submit.
now select the file Windows_Mobile_6.1_East_Europe and start downloading...
let me know if the download has started also
I started the download ...
Okay good. So once the download complete you are ready to flash...
This is how to flash...
1. Put ur device in bootloader mode again.
2. Connect the device to ur PC
3. RUN the downloaded file....and press NEXT NEXT NEXT....
Reply back if the flashing process is goind smooth or even if you face any problem...
Then i can finally go and sleep
Hi Developers and users !
I have a HTC Desire from Denmark (Scandinavia).
I have tried to install a custom Rom on the phone which was successful.
After a few months i wanted to go back to the original ROM that it had, because some of the buttons suddently stoped working (Volume down, Menu button,home button). I made a giant mistake and didnt took a backup of my original HTS Desire Rom, so I therefore found a rom on this forum and installed it on my phone.
Afterwards i have had my phone to the repair center and they found out that my phone had condensation, so it couldnt be fixed.
After some months my buttons that didnt work start working again, but now it suddently restarts by itself and sometime when it restarts, it just freezes on the HTC Desire splash screen. After some time it starts up...
Sometime i have to start it via Power button + volume down button -> fastboot -> Reboot.
I think i have a problem with my socalled "original rom" that i have installed. maybe its not the right one to this phone, and thats why I am creating this threat.
I have attached two jpg. pictures of my fastboot screen.
The first picture shows my HBOOT fastboot menu.
The second shows that the fastboot menu has a error in it, when it loads. It says "No image" or "wrong image". Therefore I am 100 % shure that the rom is wrong and not the condensation thing. I have used my phone 4 months after i had it to the repair check without the biggest issues, but now it wont restart sometimes.
I think i maby is missing the right Radio for this model.
I have searched this Forum thin for the same problem, and i couldnt find anything, therefore i am writing this.
Can anyone help me with the right original Rom for my phone model ?
Phone model:
HTC Desire
If you need any other information please write it.
I hope you guys would help m find the right ROM for my phonemodel.
Best regards
Tokay_dk
I am interested in the answer to this, too. I recently purchased an HTC Desire that seems to have the WWE_Asia ROM on it. I would like to install a rom with the Danish language that will work in Denmark because I want to give it to a friend who lives in Denmark.
ok i have a box full of evos left over, my 3d i just broke the screen so i was gonna use a extra but there stuck in bootloops theis one has
hboot 2.16.0001
supersonic evt2-3 shis-on
radio 2.15.00.05.02
mar 08 2011
its stuck in loop[ and i cant get to recovery, i can go to the bootloader but nothing past that either way... is there a update.zip i can use or something??? its not rooted and dont remember what this one was in the box for but i do know a rom was tryed to be installed with s-on
Doesn't sound very good.
If it doesn't bootloop inside the bootloader, the best you can do is to download and put this file on the root of your SD card, then try to install it through the bootloader to see if it fixes the problem. If not, there is not very much you can do to solve a bootloop with the phone S-ON.
http://goo-inside.me/stock/supersonic/ruu/4.54.651.1/PC36IMG.zip
thanks i will try and keep u updated, also if u can unlock with htc by saying its a 3d instead of 4g i might have tryed that i cant really remember... been a while since i used the 4g
geek4u86 said:
thanks i will try and keep u updated, also if u can unlock with htc by saying its a 3d instead of 4g i might have tryed that i cant really remember... been a while since i used the 4g
Click to expand...
Click to collapse
You can use htcdev.com to unlock the bootloader but you need hboot 2.18 and you have to select all other supported models on the htcdev tool as your device
Sent from my PC36100 using XDA
ok then i didnt do the htc unlock, well i tried the img u said and when it started the update it failed the radio, the first one, but finish the rest fine but said update failed.... i think maybe batterys low so im charging it now to try again, but i have a few bricked evos if anyone wants to see if they can unbrick em'
well i did the update about six times and differnt everytime, but the last time i had no errors an all complete but when it turns off to reboot it never comes on..... once i pull the battery and reinstall the battery if i turn the phone one it just bootloops still. anytime in a menu it says reboot divice and i do hit the button the divice never comes back on??? ivew tryed a few batterys, could this still be the problem?
well i got two bricked evo now if anyone wants them i can send the motherboard out
Hello guys , i might need a help out here. I have been round the world on google but still cant find out how to fix my problems with the phone.
Previously , I'm using 2.3.5 and im downgrade to 2.2. I have follow all the step from the link flow-wolf and i flash the
(ruu RUU_Ace_HTC_WWE_1.24.405.1_Radio_12.27.60.14b_26.02.00.29_M4_release_151852_signed.exe) my phone got freeze and turn into black screen. After a while (its takes 3 hours) the phone start vibrating with HTC Logo , when its stop vibrating and its turn on like normal but when i turn off the phone its come again freezing and black screen i cant turn into recovery mode. I have tried to flash the ROM and such but still stuck on the black screen. I really need a help out.
Now currently,
android 2.2
baseband version
12.27.60.14bu_26.02.00.29_MA
Kernel
2.6.32.21
build
1.24.405.1
software number
1.24.405.1
Thanks
Please don't double post. http://forum.xda-developers.com/showthread.php?t=2101772.
Removed the other post. Multiple posting is a violation of xda rules. Please keep that in mind next time.
regards
jotha - forum moderator HTC International
thariqman99 said:
Hello guys , i might need a help out here. I have been round the world on google but still cant find out how to fix my problems with the phone.
Previously , I'm using 2.3.5 and im downgrade to 2.2. I have follow all the step from the link flow-wolf and i flash the
(ruu RUU_Ace_HTC_WWE_1.24.405.1_Radio_12.27.60.14b_26.02.00.29_M4_release_151852_signed.exe) my phone got freeze and turn into black screen. After a while (its takes 3 hours) the phone start vibrating with HTC Logo , when its stop vibrating and its turn on like normal but when i turn off the phone its come again freezing and black screen i cant turn into recovery mode. I have tried to flash the ROM and such but still stuck on the black screen. I really need a help out.
Now currently,
android 2.2
baseband version
12.27.60.14bu_26.02.00.29_MA
Kernel
2.6.32.21
build
1.24.405.1
software number
1.24.405.1
Thanks
Click to expand...
Click to collapse
Not only you double post but also you can´t read...downgrading a GB running device to a Froyo RUU messes severily the bootloader and puts it to work in super slow motion and is a pain on the neck to sort that issue out. Good luck my friend....