Here is the firmware repacked in 3 files to allow repartitioning and changing CSC and Modem(mix and match), no Sbl.bin or boot.bin are included, so it's safe to flash and will not disable Download Mode.
PDA: XXQJ3
Modem: XXJPY
CSC: DBTJS2
Swype:
US English, Nederlands, French, Deutsch, Italian, Korean, Portuguese, Polish, Spanish, Turkish.
Multiupload (no slow hotfile-only link!!) : Download (146.9 MB) Double-click to extract.
Build.prop:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=FROYO
ro.build.display.id=FROYO.XXJQ3
ro.build.version.incremental=XXJQ3
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 25. (화) 22:51:53 KST
ro.build.date.utc=1295963513
ro.build.type=user
ro.build.user=root
ro.build.host=sep-57
ro.build.tags=release-keys
ro.product.model=GT-I9000
ro.product.brand=samsung
ro.product.name=GT-I9000
ro.product.device=GT-I9000
ro.product.board=GT-I9000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9000-user 2.2.1 FROYO XXJQ3 release-keys
ro.build.fingerprint=samsung/GT-I9000/GT-I9000/GT-I9000:2.2.1/FROYO/XXJQ3:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9000XXJQ3
ro.build.hidden_ver=I9000XXJQ3
ro.build.changelist=875036
ro.tether.denied=false
# end build properties
Click to expand...
Click to collapse
Good luck flashing
Thx!
Hi Ramad, would it be possible to upload a 1-file-Tar also? Thx very much!
Sent from my GT-I9000 using Tapatalk
1.unrar I9000XXJQ3
2.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
3.Select the Modem, PDA, CSC and .pit file in Odin.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.When the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
ODIN + PIT -Download Link1 or Link2
All CSC Download Link1 or Link2
I9000XXJQ3 Download Link1 or Link2
Are this I9000XXJQ3 older than I9000XWJS7 ??? About SamFirmware , it is older....
Regards
miro666 said:
Are this I9000XXJQ3 older than I9000XWJS7 ??? About SamFirmware , it is older....
Regards
Click to expand...
Click to collapse
It seems to be that JS7 is newer than JQ3 when comparing build dates.
[Ramad] said:
ro.build.version.incremental=XWJS7
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 02. 16. (수) 14:07:24 KST
Click to expand...
Click to collapse
[Ramad] said:
ro.build.version.incremental=XXJQ3
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 01. 25. (화) 22:51:53 KST
Click to expand...
Click to collapse
Special thanks Remad
Nash123 said:
Thx!
Hi Ramad, would it be possible to upload a 1-file-Tar also? Thx very much!
Click to expand...
Click to collapse
Sure, Download
Lord Style said:
Special thanks Remad
Click to expand...
Click to collapse
You are welcome
Right now now i have a mixed rom for DBT (JS3/JPY/JP3), should i stay or should i GO JQ3 ?
In this case i should use .pit file? will my phone lose apps & settings?
When you say official release, does that mean this one is a final, which is getting deployed by carriers?
Auzy said:
When you say official release, does that mean this one is a final, which is getting deployed by carriers?
Click to expand...
Click to collapse
This is the Firmware released by Samsung via Kies for the German mobile phones with CSC: DBT (I think it stands for Debitel).
... and that is the code of every open market version of galaxy S in germany
a3nalin said:
... and that is the code of every open market version of galaxy S in germany
Click to expand...
Click to collapse
I did read that somewhere but wasn't sure if it was right so I did not write it as German CSC used to be XEG, thanks for clarifying.
Thanks again for this.
Besides location, are there noticeable differences between JS5 JS7 and JQ3?
Could you make a zip file with the JQ3 Swype (to be flashed from recovery) ? I messed the original swype within JS5 and now I am missing the Dutch language...
I flashed Swype JPA ( So now I have all the languages I need) but it's an older swype version ( I guess)
Cheers
betoNL said:
Thanks again for this.
Besides location, are there noticeable differences between JS5 JS7 and JQ3?
Could you make a zip file with the JQ3 Swype (to be flashed from recovery) ? I messed the original swype within JS5 and now I am missing the Dutch language...
I flashed Swype JPA ( So now I have all the languages I need) but it's an older swype version ( I guess)
Cheers
Click to expand...
Click to collapse
You are welcome
You can use one of the Armani CSC CWM packages to install Swype of the original firmware that you want:http://forum.xda-developers.com/showthread.php?t=948790 Try DBTJS2 package and see how it goes.
Sent from my GT-I9000 using XDA App
sukkel said:
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Good to know ......
[Ramad] said:
Swype:
US English, Nederlands, French, Deutsch, Italian, Korean, Portuguese, Spanish, Turkish.
Click to expand...
Click to collapse
Seems you've forgotten "Polish". At least the one available on Kies has it.
pingling said:
Seems you've forgotten "Polish". At least the one available on Kies has it.
Click to expand...
Click to collapse
Done, thanks
Thx for all your work with the LowLevel-Packages, [RAMAD] (JQ3, JS8, ...)! Youre doing a great job for all of us!
Must be said!
Donald Nice said:
Thx for all your work with the LowLevel-Packages, [RAMAD] (JQ3, JS8, ...)! Youre doing a great job for all of us!
Must be said!
Click to expand...
Click to collapse
Thanks for your words..
I'm glad that I can help, this is the whole idea. I did not develop the firmware, I did only re-package the firmware, so it's really not a big deal.
I would like to clear something up...These packages are medium-priority packages actually. Low-level is related to 'formatting' as in HDD format, anyway, the idea is that I do only want to refer to them as 1 file or 3 file Odin package(s), because I don't want to get into discussions that leads to nowhere with some members...
Related
newest ROM out there. build info: Sat Mar 12 16:37 2011
Here is the firmware divided on 3 files, no bootloaders are included, so it's safe and you can choose CSC for your region before flashing.
Multiupload link: Download (157.5 MB)
Credits to Ramad for this!!!!
PDA: ZSJPJ
Modem: ZSJPG
CSC: ZSJPG
official firmware for North Asia, available via Kies
buid info: Sat Mar 12 16:37 2011
languages: Chinese (3), Korean, eng UK, eng US
Tks, but what I'm about to do, and hope you don't mind
/RANT MODE ON
WHAT THE **** IS SAMSUNG DOING????
This is the 2nd release for North Asia, and yet nothing for South East Asia!!!!
Go stuff it, SAMSUNG!!!
/RANT MODE OFF
Sorry for crashing into your thread, and thanks for this release.
Sent from my GT-I9000
alelas said:
Download link http://www.multiupload.com/9TL2UOTP0B
ZSJPJ/ZSJPG/ZSJPG
was posted a while ago here http://forum.xda-developers.com/showpost.php?p=12211910&postcount=383 , so I thought I'd put it in separate thread.
If anybody wants to flash with odin and give more info on built date etc?
Click to expand...
Click to collapse
buid info: Sat Mar 12 16:37 2011
modem ZSJPG
and contains strange languages out of Eng US and Eng UK....6 in total
kernel 2.6.32.9 [email protected] #8
froyo 2.2.1
this is a rom for taiwan,hk,china,those language are chinese
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=FROYO
ro.build.display.id=FROYO.ZSJPJ
ro.build.version.incremental=ZSJPJ
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=Sat Mar 12 16:37:36 KST 2011
ro.build.date.utc=1299915456
ro.build.type=user
ro.build.user=root
ro.build.host=avad-server
ro.build.tags=release-keys
ro.product.model=GT-I9000
ro.product.brand=samsung
ro.product.name=GT-I9000
ro.product.device=GT-I9000
ro.product.board=GT-I9000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=zh
ro.product.locale.region=HK
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9000-user 2.2.1 FROYO ZSJPJ release-keys
ro.camera.sound.forced=1
ro.build.fingerprint=samsung/GT-I9000/GT-I9000/GT-I9000:2.2.1/FROYO/ZSJPJ:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9000ZSJPJ
ro.build.hidden_ver=I9000ZSJPJ
ro.build.changelist=951673
ro.tether.denied=false
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=48m
dalvik.vm.execution-mode=int:jit
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version=131072
#
# ADDITIONAL_BUILD_PROPERTIES
#
windowsmgr.max_events_per_sec=55
keyinputqueue.use_finger_id=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
keyguard.no_require_sim=true
ro.config.ringtone=01_Samsung_tune.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.opengles.version=131072
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Sent from my GT-I9000 using XDA App
and available from kies
Sent from my GT-I9000 using XDA App
sorry for misleading, that is 3 chinese and 1 korean, and 2 english
Sent from my GT-I9000 using XDA App
Any major performance change in this firmware, Is the browser bug fixed?
How is the overall performance of the firmware compare JSJPG and JS8.
As its new firmware and couple of hours back its Released, Kindly check the battery performance and post the feedback.
Thanks
quadrant score are nearly the same, but whole system seems more responsive when compare to jpg, browser bug not fix
Sent from my GT-I9000 using XDA App
Any more feedback as to how this base feels after JS8 or JPG? Makes sense to upgrade?
Swyped from another GALAXY
What about input languages?
input language is the same as jpg
something strange about this firmware:
1. phone get much hotter, I never feel this before. (JPG 41C, JPJ 44C when using xda app)
2. I don't know if this is a feature of xda app or not, I active screen capture function when I am using xda app, and I don't have any screen capture app install
update: same as galaxy tab, it got screen capture feature itself, is this the same for other firmware?
Sent from my GT-I9000 using XDA App
Please beware, the firmware posted at post #1 does include bootloaders.
I'm now uploading the 3 file firmware with no bootloaders.
Edit.
Here is the firmware divided on 3 files, no bootloaders are included, so it's safe.
Multiupload link: Download (157.5 MB)
PDA: ZSJPJ
Modem: ZSJPG
CSC: ZSJPG
Good luck flashing your devices.
post deleted
I was experiencing increased heat on the blackplate around the camera with JS8 and had posted that experience to the thread. Pretty sure I experienced that with an earlier ROM, can't recall which though.
DummyPLUG said:
input language is the same as jpg
something strange about this firmware:
1. phone get much hotter, I never feel this before. (JPG 41C, JPJ 44C when using xda app)
2. I don't know if this is a feature of xda app or not, I active screen capture function when I am using xda app, and I don't have any screen capture app install
update: same as galaxy tab, it got screen capture feature itself, is this the same for other firmware?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
[Ramad] said:
Please beware, the firmware posted at post #1 does include bootloaders.
I'm now uploading the 3 file firmware with no bootloaders.
Edit.
Here is the firmware divided on 3 files, no bootloaders are included, so it's safe.
Multiupload link: Download (157.5 MB)
PDA: ZSJPJ
Modem: ZSJPG
CSC: ZSJPG
Good luck flashing your devices.
Click to expand...
Click to collapse
Thanks Ramad, I can always count on you for 3 files
The kernel in this firmware is interesting. It should let us download apps bigger than 30MB (/cache partition) from the Market.
DummyPLUG said:
input language is the same as jpg
something strange about this firmware:
1. phone get much hotter, I never feel this before. (JPG 41C, JPJ 44C when using xda app)
2. I don't know if this is a feature of xda app or not, I active screen capture function when I am using xda app, and I don't have any screen capture app install
update: same as galaxy tab, it got screen capture feature itself, is this the same for other firmware?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
I figured they were the same as JPG but I cannot find a list of input languages for JPG either so I thought this was as good a place as any to ask... Is there at least english, spanish and korean as inoput langs? thanks a bunch.
hardcore said:
The kernel in this firmware is interesting. It should let us download apps bigger than 30MB (/cache partition) from the Market.
Click to expand...
Click to collapse
Perhaps an OTA?
Mandado desde el móvil usando los dedos
Someone said that this JPJ has fixed the bug that JPG will format your internal SD card when you change the battery. Is it true?
Swype got english, chinese and korean only
This is the latest Froyo 2.2 release for North-America(Canada), the firmware is re-packaged to a 3 files' firmware so it can be flashed with or with pit and re-partition.
Firmware: I9000MUGKC1
PDA: UGKC1
MODEM: UGKC1
CSC: MultiCSC (BMC, BWA, VMC)
No bootloaders, Multiupload Link: Download (145.2 MB) (Double-click to extract)
With bootloaders, Multiupload Link: Download (145.4 MB) (Double-click to extract)
Note: Flash as PDA only with no pit and no re-partition. Flash at your own risk!)
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=FROYO
ro.build.display.id=FROYO.UGKC1
ro.build.version.incremental=UGKC1
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2
ro.build.date=2011. 03. 04. (금) 16:07:58 KST
ro.build.date.utc=1299222478
ro.build.type=user
ro.build.user=shout.lee
ro.build.host=SEP-09
ro.build.tags=release-keys
ro.product.model=GT-I9000M
ro.product.brand=samsung
ro.product.name=GT-I9000M
ro.product.device=GT-I9000M
ro.product.board=GT-I9000M
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=CA
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9000M
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9000M-user 2.2 FROYO UGKC1 release-keys
ro.build.fingerprint=samsung/GT-I9000M/GT-I9000M/GT-I9000M:2.2/FROYO/UGKC1:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9000UGKC1
ro.build.hidden_ver=I9000UGKC1
ro.build.changelist=928457
ro.tether.denied=false
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=48m
dalvik.vm.execution-mode=int:jit
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version=131072
persist.sys.timezone=America/Toronto
#
# ADDITIONAL_BUILD_PROPERTIES
#
windowsmgr.max_events_per_sec=55
keyinputqueue.use_finger_id=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
keyguard.no_require_sim=true
ro.config.ringtone=01_Samsung_tune.ogg
ro.config.notification_sound=20_Cloud.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.opengles.version=131072
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Good luck and have fun
Thanks Ramad!
Sent from my GT-I9000 using XDA Premium App
Thanks. Nice to have all the parts seperate.
I also have the original TAR file from kies, which also include the SBL.
Is it the same thing?
zorxd said:
I also have the original TAR file from kies, which also include the SBL.
Is it the same thing?
Click to expand...
Click to collapse
This package does not include Sbl.bin, my opinion is if Download Mode works then don't re-flash it unless you have to.
Ok Downloading
[Ramad] said:
This package does not include Sbl.bin, my opinion is if Download Mode works then don't re-flash it unless you have to.
Click to expand...
Click to collapse
Well if the sbl.bin included in KC1 is newer I would prefer to flash it too. Kies flash it anyways, and I will probably upgrade with kies.
zorxd said:
Well if the sbl.bin included in KC1 is newer I would prefer to flash it too.
Click to expand...
Click to collapse
I concur. It would be great if we can get the secondary bootloader also
Well as I said I have it. I can upload the original tar file from kies if some people are interested.
The firmware with Sbl.bin is added, flash at your own risk, I'm not responsible if you brick your phone.
Hello Guys,
I have the GT-I9000M and I recently upgrated my firmware to this version FROYO.UGKC1. I am getting the error message "Warning Camera Failed" everytime i launch the camera app so now I am looking to root my device to fix this. I found many different solutions but they all require for the device to be rooted. I tried rooting my device with the z4root app but it did not work and i am guessing it is because of my firmware version. I am new to rooting but I have read a lot of article about this since then. Can somebody please help me root my device or just find a solution to the camera issue? It would be really appreciated. Thank you!
Use SuperOneClick Root.. works great...
http://forum.xda-developers.com/showthread.php?t=803682
Im coming from miui so do i flash the 3 file with pit and repartition?
Jason123420 said:
Im coming from miui so do i flash the 3 file with pit and repartition?
Click to expand...
Click to collapse
Yes please.
[Ramad] said:
Yes please.
Click to expand...
Click to collapse
Yes please? I take it that means with pit and repartition?
Sent from my GT-I9000 using XDA Premium App
Jason123420 said:
Yes please? I take it that means with pit and repartition?
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Yes, please use pit and re-partition.
Your questions was if you should use pit and re-partition, answering by Yes and adding 'please' does not make it 'No'.
xpirozx said:
Use SuperOneClick Root.. works great...
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Thank you so much! Worked fine for me. I rooted my phone, replaced my camera firmware files and everything works fine now.
[Ramad] said:
Yes, please use pit and re-partition.
Your questions was if you should use pit and re-partition, answering by Yes and adding 'please' does not make it 'No'.
Click to expand...
Click to collapse
Thanks
Sent from my GT-I9000 using XDA Premium App
Hi folks.
Do you know if this firmware has Brazilian Portuguese language and swype ?
If not, can you tell me the latest firmware for I9000, not I9000B that hast it ?
Thanks a lot.
I think most, if not all Euro ROMs have Portuguese, but from Portugal. These ROMs are the most popular here on XDA. Asian ROMs are popular too.
If you really want Brazilian Portuguese, I think you have no choice but sticking to official i9000B ROMs.
This one is a Canadian ROM and if I remember it has only English and French. Quite a few Swype language but I don't remember seeing anything about Brazil.
Froyo 2.2.1 I9000JPJPM: (No bootloaders)
PDA: JPJPM
MODEM: JXJPF
CSC: OJPJPL (MultiCSC: EGY, JED, KSA, MAT, MED, MID, MMC, MWD, PAK, THR, WAN, XSG, XSS)
Multiupload Link: Download (147.6 MB) (Double-Click to extract)
The firmware is ultra compressed 7zip SFX-file to save your time and bandwidth, the firmware is a 3 files firmware, flash with or without re-partition.
The firmware has been passed to me by a member at XDA.
Build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=FROYO
ro.build.display.id=FROYO.JPJPM
ro.build.version.incremental=JPJPM
ro.build.version.sdk=8
ro.build.version.codename=REL
ro.build.version.release=2.2.1
ro.build.date=2011. 02. 17. (목) 14:41:30 KST
ro.build.date.utc=1297921290
ro.build.type=user
ro.build.user=root
ro.build.host=SE-S606
ro.build.tags=release-keys
ro.product.model=GT-I9000
ro.product.brand=samsung
ro.product.name=GT-I9000
ro.product.device=GT-I9000
ro.product.board=GT-I9000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=ar
ro.product.locale.region=AE
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-I9000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9000-user 2.2.1 FROYO JPJPM release-keys
ro.build.fingerprint=samsung/GT-I9000/GT-I9000/GT-I9000:2.2.1/FROYO/JPJPM:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I9000JPJPM
ro.build.hidden_ver=I9000JPJPM
ro.build.changelist=913489
ro.tether.denied=false
# end build properties
#
# system.prop for smdkc110
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=48m
dalvik.vm.execution-mode=int:jit
# The OpenGL ES API level that is natively supported by this device.
# This is a 16.16 fixed point number
ro.opengles.version=131072
#
# ADDITIONAL_BUILD_PROPERTIES
#
windowsmgr.max_events_per_sec=55
keyinputqueue.use_finger_id=true
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
keyguard.no_require_sim=true
ro.config.ringtone=01_Samsung_tune.ogg
ro.config.notification_sound=01_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.opengles.version=131072
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Has anyone tried this yet compared to others? I mean, surely they will focus on gingerbread from now on.
Sent from my ever changing Galaxy S
Is this a stock Rom or custom Rom ? the first jpm rom was custom rom and it was rooted !!
arashkhaan said:
Is this a stock Rom or custom Rom ? the first jpm rom was custom rom and it was rooted !!
Click to expand...
Click to collapse
This is not a costume firmware, it's good, it's fast.
Thanks Ramad... I'm using the pre-rooted & deodexed version of JPJPM... Is this one the original one? I mean non-rooted and not deodexed?
By the way it is still not available on KIES...
buntoo said:
Thanks Ramad... I'm using the pre-rooted & deodexed version of JPJPM... Is this one the original one? I mean non-rooted and not deodexed?
By the way it is still not available on KIES...
Click to expand...
Click to collapse
This is a leaked original firmware, it's why I did not write that it was a release.
I'm now deodexing this firmware, adding the final touches before adding it to deodexed stock firmware collection.
Do you mind providing the modem file? Cwm preferable but bin file is fine.
Is there a modem repository in this i9000 forum? I know there's one in the captivate forum, just seeing if this is a new or old modem here. Thanks
Sent from my SAMSUNG-SGH-I897 using Tapatalk
zerkai said:
Do you mind providing the modem file? Cwm preferable but bin file is fine.
Is there a modem repository in this i9000 forum? I know there's one in the captivate forum, just seeing if this is a new or old modem here. Thanks
Click to expand...
Click to collapse
Pick the Modem you like : http://forum.xda-developers.com/showpost.php?p=11256537&postcount=2
This rom have phone.apk force close bug ??
CF-root
hi
I need cf-root
plz help
ArmaN70 said:
hi
I need cf-root
plz help
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=788108
Naeem786 said:
http://forum.xda-developers.com/showthread.php?t=788108
Click to expand...
Click to collapse
Which I use for JPJPM ?
Naeem786 said:
This rom have phone.apk force close bug ??
Click to expand...
Click to collapse
everything works fine and there's no force close bug sofar (it's not like that one! )
ArmaN70 said:
hi
I need cf-root
plz help
Click to expand...
Click to collapse
there's no cf-root for the kernel of this rom at the moment
you can go to this topic and ask Chainfire to make that! (btw I asked him )
http://forum.xda-developers.com/showthread.php?t=788108
ArmaN70 said:
hi
I need cf-root
plz help
Click to expand...
Click to collapse
If you only want to root then try SuperOneClick
[Ramad] said:
If you only want to root then try SuperOneClick
Click to expand...
Click to collapse
thx but i need cf-root for 2e recovery
So we have to wait
ArmaN70 said:
thx but i need cf-root for 2e recovery
So we have to wait
Click to expand...
Click to collapse
Flash a kernel like voodoo 5.5 or speedmod...
ArmaN70 said:
thx but i need cf-root for 2e recovery
So we have to wait
Click to expand...
Click to collapse
Flash CF-Root XWJS8 kernel, that will do it.
Works great!!! Thanks a lot! The only minor thing that I've noticed battery is draining quickly... I don't know if there is a patch for this... but so far so good...Thanks again!
This Rom has problem when it connects to my bluetooth audio system after sometime it just disconnect !!!
I've not a single problem with this ROM...
P1000XWJQ3:
Android 2.3.5
Code:
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.XWJQ3
ro.build.version.incremental=XWJQ3
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.5
ro.build.date=Sat Oct 8 17:11:10 KST 2011
ro.build.date.utc=1318061470
ro.build.type=user
ro.build.user=root
ro.build.host=DELL131
ro.build.tags=release-keys
ro.product.model=GT-P1000
ro.product.brand=samsung
ro.product.name=GT-P1000
ro.product.device=GT-P1000
ro.product.board=GT-P1000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-P1000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-P1000-user 2.3.5 GINGERBREAD XWJQ3 release-keys
ro.build.fingerprint=samsung/GT-P1000/GT-P1000:2.3.5/GINGERBREAD/XWJQ3:user/release-keys
# Samsung Specific Properties
ro.build.PDA=P1000XWJQ3
ro.build.hidden_ver=P1000XWJQ3
ro.build.changelist=641402
# end build properties
Download:
http://hotfile.com/dl/133942372/0906c8e/GT-P1000_XFM_P1000XWJQ3_P1000XFMJQ2_P1000XXJQ3.rar.html
Pass: sampro.pl
This is official i saw it at samfirmware...
Sent from my GT-I9100 using Tapatalk
Finally 2.3.5
Recently flashed.
Pros:
New unlock screen (like honeycomb)
Smoother file manager
Talk 1.3 but without video calling
Cons:
Outdated Market, Maps, Samsung Apps, etc.
Known bug with "null" in Samsung keyboard
Is this version only for P1000XWJQ3?
Or maybe can instal on this P1000XXJPZ??
boxter7 said:
Is this version only for P1000XWJQ3?
Or maybe can instal on this P1000XXJPZ??
Click to expand...
Click to collapse
It wors fine with JPZ modem.
Maybe I have a stupid question, with which program to run this room?
how to flash
ok,
don't want to risk to brick my tab.
So how to flash this?
odin 1.7? right?
put Tab in Download mode
connect to PC
and than???
What to put where?
PS: using an EU Tab, german unbranded originally (DBT)
at the moment: GB pre-rootet russian version 1.1 at the moment.
THX
weichei said:
ok,
don't want to risk to brick my tab.
So how to flash this?
odin 1.7? right?
put Tab in Download mode
connect to PC
and than???
What to put where?
PS: using an EU Tab, german unbranded originally (DBT)
at the moment: GB pre-rootet russian version 1.1 at the moment.
THX
Click to expand...
Click to collapse
Yes. Flash using Odin3 v1.7 with single file as PDA without repartition.
This firmware doesn't wipe your internal memory.
All will be fine!
It for GSM GT-P1000 ?
Where do I find root for this ROM ?
This is a cdma rom isn't it? That means no flashing on GSM tabs ? Worth confirming!
goughymachine said:
This is a cdma rom isn't it? That means no flashing on GSM tabs ? Worth confirming!
Click to expand...
Click to collapse
Nope! Chuck Testa!
maihuuquan said:
It for GSM GT-P1000 ?
Where do I find root for this ROM ?
Click to expand...
Click to collapse
This ROM works fine with GSM and WCDMA(=UMTS) with my EU Tab from Germany
so: it IS GSM!
Thanks so much!
But it hasnt root now.
cromed said:
Recently flashed.
Pros:
New unlock screen (like honeycomb)
Smoother file manager
Talk 1.3 but without video calling
Cons:
Outdated Market, Maps, Samsung Apps, etc.
Known bug with "null" in Samsung keyboard
Click to expand...
Click to collapse
Is there any solution for the bug with "null" in Samsung Keyboard? Unfortunatly it is the only keyboard available in this ROM ...
Apart from that it is a very good ROM.
.md5
Hi thanks for the information
Do I put tar.md5 file straight into the pda section, or do I need to convert it before hand?
Thanks for help
maihuuquan said:
Thanks so much!
But it hasnt root now.
Click to expand...
Click to collapse
Root works using this script
http://forum.xda-developers.com/showthread.php?t=1319653
I recommend installing the Swype beta.
Sent from my GT-P1000 using Tapatalk
flashed
Well, confirmed working with Telstra tab
Found: blue border when scrolled to the end, feel smoother transition between pages in the app drawer, smaller icons in app drawers, new lock screen (not exactly same as honeycomb), dialer is smoother and usable. Battery use is more ACCURATE now (battery use of the display is higher than others)
still slow to open favorite in stock browser, no animation when rotating.
Generally, happy to have updated
mobilehans said:
Is there any solution for the bug with "null" in Samsung Keyboard? Unfortunatly it is the only keyboard available in this ROM ...
Apart from that it is a very good ROM.
Click to expand...
Click to collapse
Flash again, but with pit and repartition.
so I suppose this is European firmware? will this work over Asian firmware DXJPI... if I flash this without flashing .pit file, this will not wipe internal sdcard, right?
Just wondering if internet calling is enabled in call setting. can anyone confirm?
tried this and loving it... hopefully an Asian update will be released pretty soon...
P1000ZHJQ5 (2.3.6)
Firmware: P1000ZHJQ5
Modem: P1000ZHJQ1
CSC: P1000ZZHJQ4
Build Date: 27.06 2012
Change List: 1157361
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.ZHJQ5
ro.build.version.incremental=ZHJQ5
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Wed Jun 27 00:07:33 KST 2012
ro.build.date.utc=1340723253
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEI-30
ro.build.tags=release-keys
ro.product.model=GT-P1000
ro.product.brand=samsung
ro.product.name=GT-P1000
ro.product.device=GT-P1000
ro.product.board=GT-P1000
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=zh
ro.product.locale.region=HK
ro.wifi.channels=
ro.board.platform=s5pc110
# ro.build.product is obsolete; use ro.product.device
ro.build.product=GT-P1000
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-P1000-user 2.3.6 GINGERBREAD ZHJQ5 release-keys
ro.build.fingerprint=samsung/GT-P1000/GT-P1000:2.3.6/GINGERBREAD/ZHJQ5:user/release-keys
# Samsung Specific Properties
ro.build.PDA=P1000ZHJQ5
ro.build.hidden_ver=P1000ZHJQ5
ro.build.changelist=1157361
ro.camera.sound.forced=1
ro.flash.resolution=1080
# end build properties
Download:
https://hotfile.com/dl/163619910/bf83e15/GT-P1000_TGY_P1000ZHJQ5_P1000ZZHJQ4_P1000ZHJQ1.zip.html
Is this a dev post?
Sent from my GT-P1000 using xda app-developers app
Is this the same ROM that's on SamFirmware?
http://www.sammobile.com/firmware/?page=8&view=5459
This rom is awesome. fast,stable and low battery drained. If there are more customized functions, this rom is the best.
Looks great! I'm about to try. Thank you!
Have to change suffix name to .tar.
I' d up with .md5 but my tab couldn't login into home.
Always reboot and back to downloading.
I opened file and into md5 file has not such as pit file.
And I changed to tar file and saw them.
But couldn't login into home.
I hard reboot and it's OK!
Maybe you have to change to tar file.
sr my bad E.
maihuuquan said:
Have to change suffix name to .tar.
I' d up with .md5 but my tab couldn't login into home.
Always reboot and back to downloading.
I opened file and into md5 file has not such as pit file.
And I changed to tar file and saw them.
But couldn't login into home.
I hard reboot and it's OK!
Maybe you have to change to tar file.
sr my bad E.
Click to expand...
Click to collapse
Hi mine did the same things, after installing I had to do factory reset. So you have to put it into recovery and do reset. I hope it helps.
Sent from my GT-P1000 using Tapatalk 2
how to root it ???
tuanbca said:
how to root it ???
Click to expand...
Click to collapse
You can use the root file in 2.3.3 to root it.
how to do, and i need links.....
tuanbca said:
how to do, and i need links.....
Click to expand...
Click to collapse
root file: http://115.com/file/c2rba5qh#CF-Root-TAB7-XX-OXA-JQ1-v3.3-CWM3RFS.tar
ordin:http://115.com/file/dp50efos#Odin3v1.85.zip
1)click the second green button to download them.
2) run ordin
3) choose root in PDA
4) start and enjoy!
Waiting for review of this rom.....
thanks i have to do it
bravokylee said:
This rom is awesome. fast,stable and low battery drained. If there are more customized functions, this rom is the best.
Click to expand...
Click to collapse
How install ?? Odin fail install ??
Did you unzip?
Stick the tar.md5 in PDA
NOT stick the zip in PDA
Sent from my GT-P1000 using xda app-developers app
priyana said:
Did you unzip?
Stick the tar.md5 in PDA
NOT stick the zip in PDA
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
if the process is fine, but when clicking start, "incorrect parameter" and download the file 2 times, do not it can be.
did you check md5sum ?
$md5sum GT-P1000_TGY_P1000ZHJQ5_P1000ZZHJQ4_P1000ZHJQ1.zip
12a877e6ab2fbfc7e31b3a0fc7435043 GT-P1000_TGY_P1000ZHJQ5_P1000ZZHJQ4_P1000ZHJQ1.zip
gariasaya said:
How install ?? Odin fail install ??
Click to expand...
Click to collapse
I was on ics, have to flash from 2.2.1 to 2.3.3 then this one with ordin. I don't think you can flash it directly from ICS.
bravokylee said:
root file: http://115.com/file/c2rba5qh#CF-Root-TAB7-XX-OXA-JQ1-v3.3-CWM3RFS.tar
ordin:http://115.com/file/dp50efos#Odin3v1.85.zip
1)click the second green button to download them.
2) run ordin
3) choose root in PDA
4) start and enjoy!
Click to expand...
Click to collapse
Can you share the files on an english website? i cant download.
bravokylee said:
You can use the root file in 2.3.3 to root it.
Click to expand...
Click to collapse
can i use the overcome Kernel?
If I helped you, please press the thanks button