Related
HOW I CAN UPDATE MY JASJAR FROM JASJAR_WWE_11353_137_10301 TO JASJAR_ITA_11346_126_10301_ship??
COUNTRY ID ERROR
Thanks and excuse my english
Just unpack/extract the JASJAR_ITA_11346_126_10301_ship file into a directory.
donwload the attached file to this same directory
Run it and the Country ID error will come out, run it again right after, and it should work
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
thanks, but the update is ok without country error, but after the reset the screen is black with word: serial and v1.0
sorry...i found out the file you put for download but if i run the rom twice after have the rom and the file in the same directory i have the same error message....coul you please help me?
Thanks
Carlo Salvatore
carsa read pm
did IT!!!!...thank a lot...
carsa help me in private, please
edoalom hope everithing was fine!
i've the same problem, can you help me, too?
directory?
carsa said:
what you mean with "download the attached file to the same directory"....which file??
Thanks
Carlo Salvatore :x
Click to expand...
Click to collapse
I've got the .exe file and it simply wants to self-install in a directory with my JJ. So, which directory should I try to install this then?
thanks.
edved
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Italian to English
I purchased an imate jasjar in Italy last week. The salesperson confirmed that I can change the language from Italian to English. But when I contacted the Imate people they say it is not possible, Can someone guide me?
Thanks Felician
hanhha2000 said:
Just extract the rom required using winrar or similar (normally done by right clicking on the file and selecting extract)
donwload the file "MaUpgradeUt_noID.exe"
Copy this file into the directory
Run it and the Country ID error will come out, run it again right after, and it should work
Click to expand...
Click to collapse
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Will this technique work for my i-mate JAMin? im just afraid to screw up my device completely cos iv heard that that can happen
thanx for your help pls reply asap
I've the same problem. can you help me to solve. tnk
DeVegas said:
Hi hanhha2000, the required rom that I wanted to flash is with a .exe extension behind, how can we use winrar with this type of file, hope you can enlighten me as I have also ran in Country ID Error problems, thank you.
Click to expand...
Click to collapse
Hi,
The way i use is run the update rom and when appear the Country error, open the windows explorer and copy the folder in the temporary folder to a new location, then put the file ...noID.exe in the new folder.
I've seen a lot of people asking how folks have changed the Windows logo to the HTC one and so on. I am one of those people!
There's a thread over in the Diamond Forum here, http://forum.xda-developers.com/showthread.php?t=437307, that discusses altering the taskbar icons.
I've had a read of that but it doesn't appear to discuss the start button. I've currently got a cab installed that gave me coloured icons on the taskbar but also the 3d MS Office style start button. I like the icons but not that start button.
Is there anyway someone could provide an idiot/noob style guide for altering that icon. I'd love to have the Vista start button on my HD (attached image) but have no idea how to go about it aside from I think it has something to with .dll files.
Can anyone explain this? Anyone? I know there would be a lot of people grateful for it! I've Googled and used the search but just cannot seem to find anything!
I've attached a mock-up of my ideal; I've got the coloured icons, just the start button to go!
I think....
the explanation is to edit the shellres.192.dll file here:
http://forum.xda-developers.com/showpost.php?p=2791169&postcount=3
using the process here?
http://forum.xda-developers.com/showpost.php?p=2791165&postcount=1
No?
EDIT: I am going to try myself this evening with your very nice icon...will let you know how it goes, if you don't beat me to it!
I believe you can do it with Wisbar.
Wisbar is not free.
http://www.lakeridgesoftware.com/
sk806 said:
the explanation is to edit the shellres.192.dll file here:
http://forum.xda-developers.com/showpost.php?p=2791169&postcount=3
using the process here?
http://forum.xda-developers.com/showpost.php?p=2791165&postcount=1
No?
EDIT: I am going to try myself this evening with your very nice icon...will let you know how it goes, if you don't beat me to it!
Click to expand...
Click to collapse
you had a chance at it yet? did it work?
...........
This is the thread I used to alter the Windows logo to a HTC logo among other things in this thread. It's dead easy,
1) Unsign the file using Unsigner linked to in the thread further up (on page 2 of the Unsigner thread there's a .bat file that I found gave a better idea of whether it had worked or not).
2) Open the file in Reshacker and go to Icon on the left hand side and click it to expand it. Go to number 292, click it and it will expand to show 1033. Click 1033 and it should be the start menu icon. Right click on 1033 and select Replace Resource. Select Open File With New Icon and find your new (resized) icon. Double click it and it will show a preview of new and old. Click Replace in the bottom right corner.
3) Save the newly modified file.
4) Sign the modified file using Ssigner linked to in the thread above. CHECK THE TEXT FILE IT CREATES TO MAKE SURE IT SIGNED OK. Don't forget this bit as it will mean a hard reset if you do (as I learnt).
5) If you've not installed SDKCert.cab some time in the past. download it from here, copy it to the phone and install it.
6) Copy the file to the Windows directory on the phone using Resco Explorer or Total Commander.
7) Reboot the phone.
how did you copy shellres.192.dll? it says "Acces denied" even with resco. No chance to renaming also
To get the file in the first place you need a program called ROM Extractor on the phone to get the file from ROM. There are also different varients of the ROM for different locales. There's a description in the link above.
thanks for your efforts but seems a little complicated TotalCommander did the trick, resco seems to have some security check problems
anyway, unsigner doesn't work so i'm stuck
guap said:
anyway, unsigner doesn't work so i'm stuck
Click to expand...
Click to collapse
Try the .bat file in the second page of the Unsigner thread. Copy Unsigner, the .bat file and the file you want to unlock to the same directory and double click the .bat file. Also, because the file is from ROM make sure it's not marked as Read Only when you get it to your PC before unsigning it. If it's from ROM they're usually Read Only for a start.
frostywrath said:
you had a chance at it yet? did it work?
Click to expand...
Click to collapse
Not yet. Just got back from work. I need a different job...
I will try tomorrow. I have been meaning to give this s shot for a while now, and the icon you posted is what I have been looking for.
the bat only automize the process... It doesn't work anyway as it still use UnSigner
Do you have the cab to change the other icons? I had a quick look on the diamond thread but couldn't find the exact ones you have! Thanks.
guap said:
the bat only automize the process... It doesn't work anyway as it still use UnSigner
Click to expand...
Click to collapse
True, but when I tried Unsigner on it's own it didn't give any feedback as to what it was doing (or if it did I missed it) so I changed 150+ icons only to find it hadn't been unsigned and therefore couldn't be resigned. At least with the batch file I can check it's been properly unsigned before making changes.
Does it give you any error messages when you try Unsigner?
unclesomebody said:
Do you have the cab to change the other icons? I had a quick look on the diamond thread but couldn't find the exact ones you have! Thanks.
Click to expand...
Click to collapse
Do you mean me or someone else?
Prof. Yaffle said:
Does it give you any error messages when you try Unsigner?
Click to expand...
Click to collapse
that's the point: no errors from unsigner, but resourcehacker can't open my file (not valid bla bla bla)
In which case I'd say the file hasn't copied across properly from the phone. Reshacker should be able to open the file and allow editing even if it's still signed. I'd try ROM Extractor to copy the file from ROM to elsewhere on the phone and then copy that across to the PC.
unclesomebody said:
Do you have the cab to change the other icons? I had a quick look on the diamond thread but couldn't find the exact ones you have! Thanks.
Click to expand...
Click to collapse
Do you mean this cab?
http://cid-b6b1a627fbae21e5.skydrive.live.com/self.aspx/Public/Colored Top Bar.cab
Don't forget you'll need to install this first:
http://cid-b6b1a627fbae21e5.skydrive.live.com/self.aspx/Public/1SdkCerts.cab
Hope this helps.
Prof. Yaffle said:
In which case I'd say the file hasn't copied across properly from the phone. Reshacker should be able to open the file and allow editing even if it's still signed. I'd try ROM Extractor to copy the file from ROM to elsewhere on the phone and then copy that across to the PC.
Click to expand...
Click to collapse
uhm seems reasonable
but I don't want to extract all my whole rom for a stupid dll... I extracted with total commander, isn't supposed to work this way?
Nope, certain ROM files can't be copied using normal file copy programs. I've found that they try and copy, then say the "File already exists, do you wish to replace?" and then whatever you select you're left with a 0k file with nothing in it. The ROM extractor doesn't copy the whole ROM. When you launch it you get a list of all the ROM files. Double click the one you want to extract, give it a location (\ usually for the root directory of the phone) and a name and click Extract.
Ok, I will try. But how to replace when modified? If I can't even read it, how will I replace it?
Hi im working on creating some boot animations. Ive got the files ready, but i cant figure out how to put them into a flashable .zip.
I flashed this file thunderbolt boot animation and it worked so i figured if i just replaced my animation and audio it would work but i get an error saying "e:update script not found" or something along those lines.
Id like to know if there is an easy way to create a "template" were i just copy my animation into a folder and zip it, or if there is a program that will package it for me including the script/etc.
Any input or guide on how to make these boot animations flashable .zip's would be great, thanks.
Eat it iPhone said:
Hi im working on creating some boot animations. Ive got the files ready, but i cant figure out how to put them into a flashable .zip.
I flashed this file thunderbolt boot animation and it worked so i figured if i just replaced my animation and audio it would work but i get an error saying "e:update script not found" or something along those lines.
Id like to know if there is an easy way to create a "template" were i just copy my animation into a folder and zip it, or if there is a program that will package it for me including the script/etc.
Any input or guide on how to make these boot animations flashable .zip's would be great, thanks.
Click to expand...
Click to collapse
Thats weird it didn't work. Should. Maybe it wasn't re-packaged correctly.
Try the one attached.
CCallahan said:
Thats weird it didn't work. Should. Maybe it wasn't re-packaged correctly.
Try the one attached.
Click to expand...
Click to collapse
Thanks ill try it out, just dont have the time right now.
If you cant figure it out i'll give you a guide tomorrow when i'm off my iPad .
did you rezip it correctly?
I ran into this trouble, I forget what it is, but you have to zip the files a certain way or they will not work. I don't remember the settings anymore, but just creating a regular zip file won't work.
There is a good guide to making your own update script on xda somewhere. Just search the entire site. If i'm just flashing something simple like a theme or boot animation sometimes I just use someone else's flashable zip and replace the necessary files. I can't remember off the top of my head, but iirc there are two folders you want to keep from someone else's zip. Meta-inf which is basically the signature files and something else which contains the script. If you dissect someone's zip it should be obvious what the other folder you want to keep is. You will find the update script in one of the sub folders, and if you want you can open it with a text editor and get an idea of how the script works.
If you need more info I can help you more when I get to my computer.
Sent from my PC36100 using XDA App
dkdude36 said:
If you cant figure it out i'll give you a guide tomorrow when i'm off my iPad .
Click to expand...
Click to collapse
Id appreciate a guide either way, id rather learn to do it myself than use someone else's. No rush as i cant really approach this til the weekend.
Eat it iPhone said:
Id appreciate a guide either way, id rather learn to do it myself than use someone else's. No rush as i cant really approach this til the weekend.
Click to expand...
Click to collapse
ok, here it goes.
first, figure out where you want to push your file. i'd reccomend pushing manually in recovery to make sure the file itself works. then, using a tool like 7zip (pc) or betterzip (mac) create a file structure that matches the one on the phone. for example, if you wanted a boot animation to be put in system/customize/resource, make a folder system, customize in that, resource in that, and the bootanimation.zip inside that. now you have the main part. next, make a folder in the root of the zip called META-INF (caps counts) inside that, com, inside that, google, and inside that, android. thats /META-INF/com/google/android/. inside android, you need to place in an update-script. i'd reccomend taking one from another zip and just editing it becasue i still have not figured out a way to make that type of file (unix exec) from scratch. open it up in a .txt editor like notepad++ (pc) or coda (mac) and write your script. here is the baisic script for copying the directory system on the zip to system on the phone (like flashing a boot animation).
copy_dir PACKAGE:system SYSTEM:
CAPS COUNT AND MAKE SURE YOU HAVE AN ENTER AT THE END. IF YOU DO NOT HAVE AN ENTER AT THE END (TO MAKE IT TWO LINES INSTEAD OF ONE, LIKE ISSUEING A COMMAND) THEN IT WILL NOT WORK AT ALL ( E:SYNTAX ERROR IN UPDATE-SCRIPT IS THE ERROR YOU WILL GET)
so put this file into the folder android, and zip it. make sure it is in store only, compatibility mode, if you have such options. then, use an auto signer (or just say zip is not signed and make sure to put sig verification off) to sign the zip. flash, and watch your work magically appear.
the update-script i showed is written in amend. i have no idea how to write in edify bcuz it is much more complicated with the binary and stuff. so dont flash with cwm 3.0+.
good luck. ask if you have any questions.
hello will this methed work on like adding some personal apps you want to be on your rom?
I Read and Read and Read. The surprising part is that, what I need the most there is no video nor any instruction to fix the problem.
I'm trying to flash a ROM on my tilt 2 GSM phone.
I have already HSPL it,
I did task 29 using RhodiumWAdvancedRUU.zip because I couldn't get regular task 29 to work.
Now I get a white screen with HTC on it and it doesnt pass it. So I enter bootloader and make sure that at the bottom it shows USB. (yes I do see SPL-0.85. OliNex)
Now I try to install the ROM and here is where the problem starts.
My ROM:
I dled NRG MAXSENSE ROM which is Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
My Rhodium Update Utility (RUU) is
Rhodium_CustomRUU_v1.1.zip
I Open it and I see
CustomRUU.exe
Here is where I don't know what to do. Some instructions say that I need a .NBH file. Where do I get this file. They say it should be with my ROM.
All I get when I dl the ROM is
Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
Format 7z not .nbh
I get the Error [240] File Open when I run CustomRUU.exe. To fix it they say
"When this error message appears, check whether the downloaded image is placed in the DIRECTORY of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again."
What is the "DIRECTORY" of RUU"? Whats a directory? I never heard that term before.
Of which RUU? CustomRUU.exe?
Do I make a folder and put CustomRUU.exe in it with the Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z ?
Where is the .nbh file? Do I rename the ROM IMAGE to .nbh?
Please give me step by step. Ive read so much already and I dont know what to do anymore. Thank you for your help.
-___- I cannot believe I spent all this time for something so dumb. We should put this on the Help for NOOBS thread. The file " .7z " cannot be opened with Winzip. To open the file you have to use WINRAR. And from there we can see the Rhodium_SoftwareUpgrade.exe (RUU) and the RHODIMG.nbh files. And double clicking the Rhodium_SoftwareUpgrade.exe the software will start walking you through the process for flashing. I think it would be a good idea to add on the HOW TO FLASH A ROM that the 7z file requires WINRAR to be opened.
But thanks to the Lord I learned how to flash the Rom successfully.
--------------------
He who provides for this life but takes no care for eternity is wise for a moment but a fool forever.
-John Tillotson
Or use 7-zip!
-Jonny- said:
Or use 7-zip!
Click to expand...
Click to collapse
Too easy lol
Hi everyone
you know that a big problem of upgrading using multiloader is that all of applications and our data will be deleted due to a firmware upgrade
*This method is found by mylove90 so all credits goes to him
special thanks to mylove90, adfree, and everyone who have helped this developement
Upgrading using this method is by using "PFS" file like kies upgrades
1. first you should prepare two firmwares, one is the firmware which is installed on your phone and the second is the firmware you want to upgrade to
2. Then you need to extract files of the new and the old firmware so download Trix, Select input file (You can make PFS file from a mix between FFS , ShpApp , CSC (Not Rcrs compressed part)) but just FFS is enough
then go to "scripts" tab and select "fs_shell.trx" and add it then run the script and ...
3.then download Winmerge (google it!) its an open source application which compares two files or folders with one click
then compare the new firmware folder and old firmware folder
then in view tab choose the files we want for upgrading
4. the files which are needed are "Different files" and "Unique files" from new firmware, so copy them to a new folder
also the "unique files" from old firmware must be deleted so "copy path names" and change path names to the correct pattern ex:"/appex/sys/blabla"
5. we can delete these files during PFS upgrade by adding the file paths to "/debug/PfsDeleteList.txt" file which we'll include it in our PFS
5. every thing is done
now just download wave_remarker and in FW view select "open dump" and select the files which we put into a new folder!
make a new folder named "debug" and put a txt file named "PfsDeleteList.txt" which contains the path of files which should be deleted during pfs upgrade
then save file as PFS
6. open multiloader and first check "boot change" and flash the new firmware's boot files
then again flash other firmware files (which does not contain FFS, CSC, shpapp (just the files which you extracted)) and includes pfs file
*note that no checkboxes in this level should be checked in multiloader
Thanks I will test this method
I have some questions from who have made this method
when i try dumping just FFS and making pfs of that in flashing it says error: shpapp write
when i try dumping FFS and Shpapp it says error: csc wite
when i try dumping FFS and shpapp and csc it says error: pfs write
edit
for deleting extra files i try putting all file paths into pfsdeletelist.txt
should i use _CSC_FsDeletelist.ini for some of them?
Sorry
I got no clue what you did wrong
Never tested the update from bada 1.2 to 2.0
Best Regards
when i tried bada 2 to bada 2 upgrade
everything was ok but at the end it says CMD_USB_LOCK fail
i could successfully turn my phone on but after some seconds a blue screen appears and it says:
platform "so" checking is failed
Platform "so" modification is detected!!!
Then you didn't edit the file handling .so signatures to add in it new signatures
You can find such a file in the data folder with .so files
It is named : GeneralSoInfo.so.sig
Edit it with Notepad++ only
If you don't know WTH you are doing please just stop !
Best Regards
Its not ever easy.
Depend really exact on Firmwareversion and what you want or what you did...
NOT TRY if you need data on your handset.
At your own risk.
platform "so" checking is failed
Platform "so" modification is detected!!!
Click to expand...
Click to collapse
This is ""standard"" Error message...
I have seen this also during my database experiments...
DB2 folder...
Or some spxxfing thingies...
More infos possible. If you play with Debug Level MID or HIGH...
Then you got if luck Blue Screen with additional infos, what goes wrong...
Feel free to learn.
Your handset will not explode, BUT again.
Security since XXJL2 is improved... since bada 2.0 higher.
All mistakes or Errors made by oyu leads to Security fail...
So you can loss data.
Backup before all you can.
Good luck.
Best Regards
mylove90 said:
Then you didn't edit the file handling .so signatures to add in it new signatures
You can find such a file in the data folder with .so files
It is named : GeneralSoInfo.so.sig
Edit it with Notepad++ only
If you don't know WTH you are doing please just stop !
Best Regards
Click to expand...
Click to collapse
adfree said:
Its not ever easy.
Depend really exact on Firmwareversion and what you want or what you did...
NOT TRY if you need data on your handset.
At your own risk.
This is ""standard"" Error message...
I have seen this also during my database experiments...
DB2 folder...
Or some spxxfing thingies...
More infos possible. If you play with Debug Level MID or HIGH...
Then you got if luck Blue Screen with additional infos, what goes wrong...
Feel free to learn.
Your handset will not explode, BUT again.
Security since XXJL2 is improved... since bada 2.0 higher.
All mistakes or Errors made by oyu leads to Security fail...
So you can loss data.
Backup before all you can.
Good luck.
Best Regards
Click to expand...
Click to collapse
I havent touched .so files ever
but as this is a custom rum which i want to upgrade to maybe the problem is here
so i try upgrading to another fw
in learning these things nothing else is important for me
i have backup of my apps that are important for me
so i try everything with your help
I havent touched .so files ever
Click to expand...
Click to collapse
This Error message is for wide range of Security issues...
Only if you enable Debug Level to see Blue Screens for more details...
Example for Blue Screen is attached...
1.
Post your Blue Screen...
Maybe we can help you...
2.
Or upload your files.
MAYBE someone has time to check...
Maybe with password and password only via PM, to prevent noobs to kill their handsets...
3.
To add any other Apps is not good idea... also leads to fail...
Security HIGH
Best Regards
Now i have full flashed to another rom so i dont have that bluescreen to post it for you
but bluescreen is showing just that 2 lines i wrote
first of all i'll try another fw to upgrade to
maybe the problem was with this fw
if again i failed, i'll try to upload my files (cuz my internet speed is very low!!)
Oh WTF i think i've found the problem
when i make a pfs using wave remarker then i add it into multiloader, it writes s8500 in front of pfs
but my device is s8530
how can i solve this problem
i havent seen such settings in wave remarker
i myself found a solution for this and made a correct pfs
but again multiloader says CMD_USB_LOCK fail
I think the best way for me is to make a video of what i do yes?
and someone do me a favor and kindly check whats my fault
I'll make a video in the next days
but again multiloader says CMD_USB_LOCK fail
Click to expand...
Click to collapse
Depend what you did... you could ignore this from Multiloader...
I see this Info often if I play with my modified apps_compressed... or do other stuff. Then Autorestart not work with Multiloader...
Try to press ON OFF... (hold Button to force Restart)
At your own risk.
Not during Bootloader write.
Best Regards
I have encountered this error while using modified apps_compressed and rebooting was fine
but in this case when i try to reboot i see the blue screen or the handset stops on the first screen:
"WAVE 2 S8530"
"WAVE 2 S8530"
Click to expand...
Click to collapse
apps_compressed is PROTECTED by Bootloader...
It checks Integrity...
For easier handle unsecdload.fota...
This is only for S8500 available.
For S8530 you can't easy use modified apps_compressed... WITHOUT dataloss.
As you have to flash more then once ...
So all data is erased... before handset can start proper...
Best Regards
adfree said:
apps_compressed is PROTECTED by Bootloader...
It checks Integrity...
For easier handle unsecdload.fota...
This is only for S8500 available.
For S8530 you can't easy use modified apps_compressed... WITHOUT dataloss.
As you have to flash more then once ...
So all data is erased... before handset can start proper...
Best Regards
Click to expand...
Click to collapse
Thank you but you didnt understand what i mean !!
i said i see this error while editing apps_compressed too
but in this case i'm not doing that but again i see this error
this is the video of all i do:
http://dolphintest.co.cc/video.rar
i want to make a pfs for upgrading from JPKA1 to XXKL6
here i encounter error: pfs write
if you can't understand a part, mention here
Please check the video so we can solve my problem!!
video is just 10 mins so it doesnt take so much time
JPKA1
Click to expand...
Click to collapse
XXKL6
Click to expand...
Click to collapse
This is bada 2.0... I'm sure, I used often...
But is JPKA1 not bada 1.x
You can't mix bada 1 with bada 2...
Please correct me, if I'm wrong.
Best Regards
yes your right
but why we can't upgrade from bada 1.2 to bada 2?
by the way i've tried bada 1.2 to bada 1.2 upgrade and bada 2 to bada 2 upgrade but same problems
but why we can't upgrade from bada 1.2 to bada 2?
Click to expand...
Click to collapse
Samsung did some funny things...
"New" Bootloader, new Memory Map...
Compare adresses in Multiloader... so NOT same position...
So major changes... maybe not impossible for Samsung to convert some...
Anyway. Its Security reason and to have "clean new" OS.
Maybe also to clean all Spoofer...
I have not seen whole Video...
No idea yet.
Maybe someone else...
Best Regards