Develop Bugs

Bluetooth Upgrade and Bluetooth GPS

I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......

I have not tried it with BT GPS, but looking at what everyone else went through with their Headsets and bonding issues, I can defintiely attest to the fact that the new BT Stack on 1.72WWE works great! I have never had to re-pair my Jabra BT 250 since I paired it the first time two weeks ago. I have also been able to ActiveSync over BT without any problems.

Lucky u guys, when i did the update, i cant active sync through BT

first_major:
Try this attached document and see if it helps.

sheran_g,
Thaks alot, all i was missing was to do the active sync profile, your document helped me.
Thaks again

(some) GPS problems with 1.72 (and 1.66)
Victor said:
I don't know if anyone has noticed... but the new ROM version (1.72 + radio 14) has actually improved concerning serial bluetooth connections -- especially on my BT GPS.
Now when I bond with it, it asks me if I want to use the serial profile. I say yes, and it uses COM 5 for my BT GPS. All works fine. No need to use the Blueooth tools software that was needed before.
So this is actually an improvement, but hard to notice unless one tries "the old fashioned way" with BT GPS.
Works like a charm......
Click to expand...
Click to collapse
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Victor said:
..... I say yes .....
.... unless one tries "the old fashioned way" with BT GPS.
Click to expand...
Click to collapse
I can not remember that NO was an option. Do you mean this with the old fashion way???
Ronald

Hi guys
I'm guessing that the 1.7 upgrade is not avalable in Australia??? I cannot find it on the MyXDA website for download? is this update that you are talking about not for Australia/Asia?
Cheers...

sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley

smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
You might need to download Adobe Acrobat Reader in order to view the file. You can find the Acrobat Reader here.

dont try dow view the file in IE
Download it first and THEN view it
This works for me

smiley_thing69 said:
sheran_g said:
first_major:
Try this attached document and see if it helps.
Click to expand...
Click to collapse
dude the filedoesnt work, can u upload it again?
Smiley
Click to expand...
Click to collapse
With gozilla I can also not download the pdf, but with "save target as" it works.
@sheran_g
BTW Thanx for the post

Re: (some) GPS problems with 1.72 (and 1.66)
ronald2oo2 said:
I have noticed the added WM function for BT GPS on COM5 (already with 1.66), however 'since' 1.66 I can not get my BT GPS to work with Alturion.
The strange things are:
- At first it still worked with 1.66 but a week after it failed and Alturion and I can not get it working since (incl. 1.72 upgrade).
- if I start Alturion the blue GPS LED starts flashing fast (green LED indicates satelite lock) which suggests BT connection, but still it says "NO GPS FOUND" all the time!
- With TT3 the GPS is working ok (with BT and serial profiles)
I dare not to hope, but if anybody has an idea please let me know. I prefer not to downgrade to 1.60 since I see many issues with this downgrade on this forum.
Click to expand...
Click to collapse
Are you sure this isn't TomTom's GPS Driver causing this? TT's GPS Drivers since v2.08 have locked the BT Com Port for exclusive access by TomTom and this prevents other apps from accessing a BT GPS. Solutions are either install v2.07 which was the last driver that did not do this or remove 'the Tomtom~GPS' entry which is the culprit, removing this removes the BT Com Port lock but does not affect the use of TomTom.

@ griffog
Actually I use TomTom ~GPS 3.03 which does not have this problem anymore! Anyhow I still (temporarely) remove the TomTom ~GPS driver and soft-reset when I test with Alturion.
But thanx for the tip.
BTW it does effect the use of TomTom for me! I guess you have a serial (non BT) GPS !?
Ronald

No I use BT GPS unit's exclusively. I'll have to investigate this as I have not heard that v3.03 no longer has this problem!

@griffog
I have this information from the Dutch PocketPC-club TT forum.
It is also consistent with what I see since the TT3.03 upgrade, even while my other GPS application (Alturion) is not working. If I run TT GPS and close it and then start Alturion the Blue LED of the GPS starts flashing fast (sadly I still get "no GPS found" however).
Ronald
:wink: remember you heard it first from me, the Premier GPS Resource :wink:

Excellent news! I've just loaded it up to test and you were right It's such good news that I've posted a front page news item, thanks

Indeed it was very good news.... but therefor also more disappointing for me that I don't get Alturion -my second GPS application- to work (on the eve of my holidays).
If you also use Alturion 5.3.1.4 (you seem in to GPS), can you share your configuration with me?
OS (1.66+?)?, BTHTools or WM serial BT profile? GPS? GPS config in Alturion? and anything else you might consider important.
I really need some new straws to grasp because I have no more ideas about what to try.
Ronald

Sadly Alturion hasn't made it across the channel. I'ce contacted them on numerous occasions for a review copy but never received a reply.

Another cool fix is the fact that you can now be connected through Activesinc using the cradle and at the same time now you can receive MMSs without a problem.
Before the 1.72 upgrade, you just couln't do that. :wink:

Bluetooth Explorer creates PROBLEMS for TomTom!!!

Indeed clicking as much as one time on "Bluetooth Explorer" will cause TomTom not to function properly any more (maps/voices not found etc.).
I have learnt that the hard way!!!
Many members of this forum speculated that the Artemis SD card housing is somehow related to TT's maps to vanish.... NOT TRUE!!!
After a hard reset I have tested that TT was fully functional and I have (intentionally... just to find out) clicked on Bluetooth Explorer and BINGO the TT6.1 maps&voices are GONE!!!
If some of the forum experts would happen to read this and would feel like giving instructions to disable Bluetooth Explorer it would be very helpful.... this will surely avoid SEVERAL hard resets to many people.
I have read that one should go to Settings/Connections then select the FTP tab and uncheck "Enable Bluetooth Explorer" but this is not to be found on my ARTEMIS (P3300)... Let's see if somebody will find a moment to share his/her wisdom with the rookies and shed some lights on this annoying problem.
Cheers!
SiperX

On my Orbit you do the following to disable the Bluetooth Explorer
Settings / Connections / Bluetooth / FTP (tab)
Then select or de-select Bluetooth Explorer.

I appreciate your kind reply Patrick but as you can read in my thread this path (Settings / Connections / Bluetooth / FTP (tab)) is not available in the Artemis/HTC P3300.... Anybody else?

Do you have a comms manager? If so you can access the ftp option of the bluetooth settings from here.
TomTom and Bluetooth explorer both work on my xda orbit.

herghost, what version of TomTom are you running?
I m unable to have Bluetooth Explorer enabled on my Orbit, and get TomTom to find the maps. I am running ver 6.02

perfect, i wasnt able to make tomtom recognize maps on orbit(on universal it works w/o probs) i switched bt expl. off and it works. thx

Guys, there is no doubt. TT (mine is version 6.1) and BT Explorer are NOT going to work together! I am glad to hear that phsnake could get his orbit to resume TT functions.... And (also) I found out that my old rom (the one originally shipped with the P3300) had the path (Settings / Connections / Bluetooth / FTP) to disable BT Explorer (as Patrick_UK explained) ... but the one I am using now does not offer the chance to enable/disable BTE.... any registry master would be kind enough to offer his/her expertise to make this possible? I am not so keen on editing the REG unless I know exactly what has to be done
rom 1.28.0.0 wwe
rom date 11-06-06
radio 02.69.90
protocol 4.1.13.30
ext. rom PDAMobiz.com

SiperX:I'll try today to find reg solution, i cannot promise anything, but i'll do reg export with btexpl. switched on, then with switched off and compare reg.files. hopefully i'll find the right one key.

Phsnake, this sounds like a great idea! Thanks in advance!!! I really hope that you can succeed and give me support in this matter.
By the way where did you find the rom (ROM: DOPOD IPL: 1.25.0001 SPL:1.27.0000 GSM: 2.69.90 OS:1.28.0.0 WWE) you are running now? It sounds lke the right one for my T-Mobile Artemis.

so i compared the regs and diff follows:
Code:
[HKEY_CURRENT_USER\Software\HTC\BluetoothFolder]
"EnableClient"=dword:00000001
"HDEVICE"=dword:00031380
[HKEY_LOCAL_MACHINE\Drivers\Active\68]
"ClientInfo"=dword:00000000
"Hnd"=dword:00031380
"Key"="Drivers\\BlockDevice\\BTDisk"
"Name"="BTD1:"
i guess all U need 2 do is change "EnableClient" from 1 to 0. try it and let us know. (i can disable it thru bt settings). or remove above posted reg entries.
ROM:its standard dopod shipped(the latest one) should be on wm-gurus.com

Thanks man! The registry editing you suggested worked and the BT Expl. is now OFF and TT finds the maps again!!!
But the option to enable/disable the BT Expl. (via BT settings as you say) is still not available any chance you could send me a screenshot of your reg for both [HKEY_CURRENT_USER\Software\HTC\BluetoothFolder] and [HKEY_LOCAL_MACHINE\Drivers\Active\68]?
For your Dopod rom, could you please give me a precise link where I can download it? I could not find it at wm-gurus.com.
Thanks a lot

ftp.wm-gurus.com/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
yes i know that wont allow u to switch off btexpl. thru bt control panel.
Here are regentries U requested, but i dont think it'll help. but try.

Thanks again!
BTW, the same file (ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe) was available at XDA too.... I have tested it a few weeks ago it and -being an AU (Australian rom) my sim (Dutch T-Mobile) did not get registered as the operator is apparently not quoted .... strange that you can use it in Scotland.
For regs I will see what I manage to put together and will let you know... Great (and prompt) support was very appreciated...

Hi again,
I have flashed once more the ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe onto my Artemis and I have (FINALLY) noticed that the SIM does register and I am able to use the phone (incoming & outgoing calls).
The only problem is that every time I reboot I get a notification from the "NETWORK WIZARD" which says "your current operator (20416) is not supported. You should obtain an update from your device vendor".... Any idea how I can get this nag off my back?
Thanks

try to check \windows\startup

I have deleted (& made a copy for backup) these 5 files:
netwiz.cpl
netwiz.dat
netwiz.exe
netwiz.exe.0404.mui
netwiz.ini
from the Windows folder of my Artemis.
After rebooting the Network Wizard notification does NO LONGER pops up!!!! So I would say "Problem solved", right?
I am glad that -thanks to the recent communications we exchanged- you "inspired" me to give one more try to the Dopod rom and I finally seem to have found what I wanted.
Only one final point: In other roms if you click on the phone signal bar you get the option to turn on/off the flight mode and if you click on the icon on the right of the phone signal bar you culd turn on/off the WiFi... in this rom you get a small (blue) Comm Manager link to follow in order to enable/disable these functions.... did you find any faster ways to activate WiFi or Flight mode? May be they can be added to the voice commands?
Cheers

u can use phonealarm-some skins supports one click wifi, gprs,btooth switch,

I saw phonealarm but I have decided to spend the end of the weekend configuring my newly installed rom (immediately after I will make a Sprite backup) and along the way try to think of something to keep to a minimum the amount of additional SW installed. What do you think if I use "tray launch", would that allow me to make the necessary shortcuts?
By the way (with previous roms) I kept my Artemis overclocked at 240 Mhz and it was pretty stable, did you test any higher frequency on the Dopod rom?

Noob question about listening to MP3s through Bluetooth headsets.

Is there any way to do so? I did overlook the manual and did use the search feature and unfortunately i'm very much so a noob when it comes to avanced smartphone users. Any tips would be appreciated. Thanks.

imwillzillla said:
Is there any way to do so? I did overlook the manual and did use the search feature and unfortunately i'm very much so a noob when it comes to avanced smartphone users. Any tips would be appreciated. Thanks.
Click to expand...
Click to collapse
If you are running windows mobile 6.0 or earlier - then search on these forums (or google) for "BTAudio". this is a utility that when run, will redirect music to your bluetooth headset. Installing it may be just a tad difficult for a newbie - but it is very simple really.
If you are running 6.1 then redirecting to your bluetooth is an option when turning your bluetooth device on. On mine, when I choose (turn on) my bluetooth device via the connections settings, there is an option for "Set as wireless stereo"
Hope this helps or at least points you in the right direction

cornell2 said:
If you are running windows mobile 6.0 or earlier - then search on these forums (or google) for "BTAudio". this is a utility that when run, will redirect music to your bluetooth headset. Installing it may be just a tad difficult for a newbie - but it is very simple really.
If you are running 6.1 then redirecting to your bluetooth is an option when turning your bluetooth device on. On mine, when I choose (turn on) my bluetooth device via the connections settings, there is an option for "Set as wireless stereo"
Hope this helps or at least points you in the right direction
Click to expand...
Click to collapse
Im just guessing that the headset requires it to be...AD2P i think its called correct? because i have a plantronics explorer 220 and im not able to get that setting.

Use the BTAudio
iamanalog said:
Im just guessing that the headset requires it to be...AD2P i think its called correct? because i have a plantronics explorer 220 and im not able to get that setting.
Click to expand...
Click to collapse
Use the BTAudio. it works with my Explorer 220
BTY it isnt stereo (unless you have two of them)

This will do the trick!
This will allow you to listen to all audio coming from the handset through bluetooth regardless if the bluetooth device is mono or stereo! I love this tool!

bluetooth questions

Hello
i just got my desire and i have some questions regarding bluetooth use.
maybe im just not finding the right menus but im a little bit stuck
so first the setup and what i have done: i have a bluetooth gps receiver and im trying to connect it to my desire.
i searched, then paired
and after that i get paired but not connected.
a) so how do i connect ? tapping on it didnt do anything and holding got me a menu to unpair the device
b) after i connect how do i create a serial port ? as i understand serial port profile should be usable on android
c) is there a way to autoconnect ?
d) are there any special menus for bluetooth other than the settings menu ?
i'm coming from winmo and im a little bit stuck here
and related to that, is there even a navigation software that can make use of a bluetooth gps receiver ? it seems at least navigon has no option to change the source
thanks in advance

I've not tried with a gps receiver, but I have to ask, why? Is the built in gps no good?

TulpiX said:
and related to that, is there even a navigation software that can make use of a bluetooth gps receiver ? it seems at least navigon has no option to change the source
Click to expand...
Click to collapse
The currently available navigation software all use the Android system location services to get GPS information, and therefore do not have an option to connect to an external GPS unit.
I'm sure it a navigation solution developer could code their app to use external GPS if they so choose, as the APIs are there, but given that most Android devices have built in GPS they probably can't be bothered as it probably has limited appeal (though I do understand why some people might want it).
Regards,
Dave

hmm ok that answers some of my questions. thanks
what about the adding and connecting questions ?

[Q] DUN or PAN bluetooth profiles

Hello,
I plan to buy a Parrot Asteroid radio for my car to get benefit of the 3G apps. I got a HTC Desire HD but I saw on the Parrot forums that it is not compatible with the radio because it don't have DUN or PAN bluetooth profiles to share the 3G connection.
I just want to know if there is any way to get those profiles, and if yes, how.
Is there any alternative ROM which can enable it ?
Thank you.

noone have any advice ?