Related
anyone knows how suddenly the screen doesn't respond anymore?
I cannot even boot into windows, it needs the calibration, cannot even switch it off because i need to tap "yes"!!!
Any ideas? It is brand new and i have tried several roms but cannot go beyond the boot green screen.
Thank you.
If you get to the align screen when you do the align screen it just restarts the align screen process over again right ?.....if thats the case i had the same problem i sent it in to htc and it was covered by the warranty
is that right - you try flashing one rom, after flashing get not rospense.
than you try an other rom but same equal.
is that correct?
but you can long press with dialog yes/no.
for "clicking" yes press only action-button
(the big round thing in middle)
Can you access the device from windows (see it as a removable drive?)
If so, you can create a "welcome.not" file from your pc and copy it to the internal storage. This will make it bypass the "align screen" steps when you boot up.
The file just needs to be an empty file. Create a "New Text Document" on your desktop, rename it to "welcome.not" and place it in the root of your internal storage (if you can access it).
Haven't tried this on my Diamond, only ever on devices with an external microSD, so I'm not entirely sure that it will work. It worked for me when my TyTn II screen broke. Once it's done, you can use a program like SOTI Pocket Controller to navigate around the device more freely from your PC.
This is good for diagnosis of problems, and enabling you to flash back to stock ROM and SPL for use of your warranty etc. but I'm afraid it seems inevitable that you'll eventually need to replace the screen, which hopefully you'll be able to use you warranty for.
no, actually, i don't get to the alignement screen, i'm stuck to the "tap the screen to start using....bla bla. And cannot go further cause the screen dosen't respond. not even to shut off. Completely no response to the taps.
thank you i will try it but any idea where to get the original uspl? It is a device from france, i've got the original rom from htc site with the serial number but i still need to get it to the original uspl right? now it has the unsigned olinex, no good for a warranty, right?
and anyway the guy who sold it to me he's overseas for probably a year so...bad luck for me.
AFAIK, you need to know what the SPL was before you flashed Olinex's. I doubt there is a way to find out what it was, unless you know someone near you who had the same device at the same time who hasn't CID unlocked theirs.
Unfortunately, I've never been in a situation where I've needed to use my warranty, so I've never flashed back, but I would guess the best thing to do is to try looking it up, doing a bit of research to try to make an educated guess as to which version you might have had. It may not matter if you're slightly out, I don't how fussy they are or how rigorously they check. I would guess that as long as there is a stock SPL, it would probably pass for the original and they wouldn't look twice. Don't quote me though, like I said, I've never been there.
If anybody thinks I am completely and utterly wrong or has experience of returning to original stock ROM and SPL for warranty purposes, please feel free to correct me!
I have flashed my at&t tilt 2 with core cell evo v1.2 & it was working fine for awhile but now my screen is just black i can hear the phone make sounds and all but can't see the screen at all i really need help fixing this as this is the only phone i have any help or suggestions will be greatly appreciated thanks in advance.
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
heres a link to a potential problem solver. Try to stay away from CHT lock and auto update apps!
sagarc88 said:
i may be wrong but from what u have described... ur having a Sleep of Death (SOD) problem. have u tried takin out the battery or soft reseting the phone?
Click to expand...
Click to collapse
yes i have done both and after the phone reboots i can hear sounds but i am still unable to see anything on the screen
Edit - I take that back, if it's still not working after a reboot
Have you tried entering the bootloader and re-flashing with the stock ROM?
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
steviewevie said:
If you can't see anything at all on the screen, no splash screens etc, even after soft-reset or entering the bootloader, then it sounds like you have a hardware problem (screen failure).
Click to expand...
Click to collapse
i can't even tell if i can enter the bootloader screen because i can't see anything on the screen is there any way to tell if it's in the bootloader screen without being able to see the screen at all & if i do have a hardware problem (screen failure) how can i put stock spl & stock rom back on the phone to get it serviced
steviewevie said:
Edit - I take that back, if it's still not working after a reboot
Click to expand...
Click to collapse
if its still not working after a reboot then what? please help me i need a solution to fix this because if i can't even fix this how can i even send it in to get fixed i won't be able to because it has been flashed & has hardspl on it
"PLEASE HELP"
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
steviewevie said:
It's a tricky situation. So if you hold down Volume Down (and keep it held down) and press the reset button, then you still don't have anything come up on the screen ?
How about if you try a hard reset, does anything come up then ? You can hear the phone making sounds, so it seems like it's just the screen ?
Putting the charger in doesn't help, does it ?
You could try flashing a stock ROM from SD card and seeing what happens.
You might well have to send it back under warranty with HardSPL still on. In that case, if it was me, then if they tried to say the warranty was void just because of HardSPL I would argue very strongly against that and ask them to prove it - e.g. how can HardSPL stop your screen working ? I don't know what country you're in, but in the UK I think our consumer protection laws would have something to say about that.
Click to expand...
Click to collapse
how can i flash anything if i can't see the screen?
Doo Doo said:
how can i flash anything if i can't see the scrren?
Click to expand...
Click to collapse
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
steviewevie said:
I've never flashed via SD, so I could be wrong on this. But I thought it was still possible. I see that the instructions (in the sticky on flashing ROMs) say to put it into the bootloader and "follow the on-screen instructions". I wonder if it's possible to just wait for a while and then press the appropriate key ? Though I don't know what the "appropriate key" is.
Perhaps someone who has flashed via SD can comment further, e.g. as to whether it's possible to do this without seeing the screen ?
Click to expand...
Click to collapse
man i really need to fix this maybe you can ask around for me since i'm new here & really don't know anybody on this board
I know it's frustrating, I'd be kinda worried if I had an apparently-non-working screen too. But please be patient, and wait for more people to see your posting. The folks in the US will be coming online around this sort of time, so there will be more people looking in and hopefully someone can help further.
Flash without seeing the screen
Enter boot loader even if you can not see the screen. You can flash your phone to stock then enter boot loader again and hard spl. I had a similar situation and was able to complete the process and warranty repair with AT&T no problems, or you can pay to have it fixed at an outside shop. I was quoted 150 and refused to spend that muck so I flashed the phone without seeing the screen...
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Russ741 said:
I saw your post over on Sergio's thread but decided to answer you here.
You do have a blown screen, no doubt there. How that happened is not really relevant.
My best advise is to connect your phone to your PC and wait for the activesync connection to come up. Once that happens you know you have a good connection and can flash. Run the RUU (or exe) for your stock ROM, the on screen (PC Screen) prompts will let you know if it can't proceed. Once the stock ROM is back on it, follow the same procedure and put the stock SPL back. Then send it off to get the screen replaced.
Hope that helps
Russ
Click to expand...
Click to collapse
well when i plug my phone to the computer activesync is not popping up what can i do to get activesync to recognize my phone
can somebody please help me i need to reflash my phone but i am unable to see anything on my screen when i plug it up to my computer activesync is not working so what can i do please i really need help with this
Flashing witout screen
Step 1
Enter boot loader mode (* Remove the back cover from the phone.
* Hold the Volume Down button.
* Use the stylus to press the reset hole.
* Or if the device was powered off, press the power button whilst holding down the Volume Down button.)
and attach to computer. (wait 30 to 60 seconds)
Step 2
Check device manager for HTC mobile sync under mobile devices.(Active sync will not work in boot loader mode)
Step 3
Flash using Rhodium CustomRUU on your PC. (use original ROM from At&T.
Step 4 repeat for Radio
Step 5 Use Stock_SPL_Restore_087.zip from http://forum.xda-developers.com/showthread.php?t=550131 repeat the process with it.
This should work it did for me. Let me know if you run into problems.
I thought I had it all figured. Root, with Clockwork Recovery, Rom Manager. Nothing could go wrong. Now I am stuck at the splash screen with no Clockwork Recovery.
I searched fourum after forum to find a solution, but mine seems to be different. Just so you know I am 21, and a freelance computer technician so I am not afraid of the command line
What have I done to my device:
=Originally it had 2.1
=I rooted the phone via exploid method
=I installed CyanogenMod 6.1.1
+My computer only recognized my phone in HBoot mode, I think usb debugging is turned off though because I cannot acces my sd while it is in my phone.
I do have a microsd card reader
+I tried Esprimg.zip updates. It works .but I still cannot get into recovery mode.
For extra precaution, I backed up all of my sd card data on my pc.
Symptoms and problems:
+I am stuck at the white My tough slide 3g splash screen.
Holding up and power for at least 30 seconds does not get me in recovery mode. All I see is the white My tough slide 3g splash screen. No Black screen with a triangle(Biggest Problem)
+Holding down and power does get me into the HBoot.
+The recovery option will make the Mytouch slide reboot, but it will freeze at the splash screen.
+The clear storage option executed, but it did not solve my problems.
+I have also removed the battery, sim, and sd card.
Summuaray-
I need to get Into Recovery mode, but when I press up and power it does not work. I only see a white.I never though there would be a day where I could not get into recovery.
Also, I constantly charge the device so it wont turn off during an update.
Do you have S-OFF? If you do it should not be hard to recover.
If you don't I can't think of any other method now. But just to make sure which Esprimg.zip method did you tried? Because that should work in the first place.
Mine says S-On
Esprimg.zip
I used my microsd card reader to put esprimg.zip on the sd card. Boot the device while holding down and power. I let the phone check for the esprimg.zip and then the update was successful.
Conclusion:
I hold up and power and i cannot access recovery mode.
Possible causes:
By doing the clear storage, would that change my device to s-on. Honestly I never noticed s-on until now. However, I was able to root and get clockword mod 6.1.1 and it ran smoothly for a weeks.
darko4 said:
By doing the clear storage, would that change my device to s-on.
Click to expand...
Click to collapse
No. Only by flashing another bootloader will you get S-ON back. You probably did not have S-OFF before anyways but FYI Esprimg.zip does flash the bootloader so you're stuck on S-ON for now.
If the Esprimg.zip update method was successful it should have flashed back the stock recovery for you. I can't think of anything that could go wrong at this point except that u have a bad or corrupted Esprimg.zip. Did you use the champion build or the ENG build? If me I'd try to download it again and give it another go.
Good luck!
Ok so Esprimg.zip may be bad, and pretty much that is my only saviour;ok I understand.
I was using Esprimg.zip from other guides. Those were 137 mb
This time I used the one from here.
HOW-TO * Flash the Eng-Release to the Slide *6/15/2010
http://forum.xda-developers.com/showthread.php?t=703076
I am going to assume this the the eng build. It was 137.1 mb.
If this does not work the I guess I have to go champion build.
------------------------------------------------------------------
Failed
Champion build esprimg.zip is next.
A few more ideas.
manually install the recovery using fastboot.
troubleshooting without simcard?
My spl s-on so would that be possible?
Is there a way to maybe re root?
I read in one post that a guy sold it on ebay..i would hate to do that with just a month of ownership. would Htc make a warranty request even though I bought it used. Besides you only see bootloader and hboot spl s-on so how could they tell?
So you reach the screen where it asked you whether you want to install the update, you choose "yes" and it goes on to flash everything, radio, bootloader, yada yada, and it fails to boot?
Basically with S-OFF you can boot into fastboot and run
fastboot flash recovery recovery.img
in this case recovery img is CWM recovery. With S-ON fastboot flash is disable so it's not possible.
EDIT: If you do have the champion build on it's basically stock.
I have this exact same issue right now, I've tried the champion and engineering builds of ESPRIMG but with no success. I can't think of anything else that would be causing this in the first place, which is making it so difficult to troubleshoot. The only difference is that I was using CM7 instead of 6, but the exact same thing is going on. I have tried everything that the OP has with no luck. The only possible cause I can think of is that something was somehow corrupted while the phone was on and sitting on my table...because when I picked it back up, it was off and when I tried to boot, I got splash screen... Any other ideas?? I'm all out and just sitting here waiting for some genius light bulb to go off....attic's kinda dusty though..
With S-ON fastboot flash is disable so it's not possible.
So basically these are my options
esprimg.zip (if that does not work then use different)
Hboot clear memory,
with S-ON I have limited option
and keep it charged.
Although with fastboot and s-on is there something I could do?
Would rerooting be an option
darko4 said:
Would rerooting be an option
Click to expand...
Click to collapse
I don't see a root method in the forum that does not involve booting into a usable system.
Wait, you guys were able to flash the esprimg.zip right? Because in the guide when it says it requires root it's for flashing the mtd0.img first before rebooting into HBoot. Since you don't have a working system you cannot do that and if HBoot refuse to take your esprimg.zip then you need to do the Goldcard method. Otherwise I don't see why having root will make a difference.
So at this stage of the game I should do this..
1.get on my knees
2.put my hands together.
3.and just pray?
ok all jokes aside. Continue to try Esprimg.zip and update(all are successful but I still get splash)
I can't change my recovery since I have s-on
and no way of getting s off since i cant get in the phone, not even recovery,just h boot
So in a sense i have a lovely soft bricked mytouch 3g slide.
Later I might compose a list of the programs i had on the device, but i doubt that would make a difference. I appreciate the help and assistance, I am going to click the thank button for you gents.
In the mean while i got a tmobile comet for 136 one day shipping..No rooting on this one cause finals are coming and I do not have time to troubleshoot for hours. I love android cause of custom roms, but not being able to get in recovery mode...ah say no more. I am going to be one of those people who just downloads free software and complain to phone carriers about OTA.
Same here. I held off rooting and all until my exams were over because I know I'm going to go all the way until I get S-OFF.
I know many discourage S-OFF because it can potentially brick during the process but if you do read up and follow instructions very carefully it is really not that risky. And it'll be very useful in situations like this.
I'm sorry to hear you have a soft-brick. Maybe a dev will stumble upon and provides new insights but I afraid this is all we have in the forum for now.
to be honest i skimmed through the post, and im sure you did try this but just want to ask have you tried the official RUU update to see if you can get things back up running that way?
yeah I understand following directions carefully, but when you follow all of directions and get it working,and make backups, but then you turn the phone off and then turn it on. Then all of this happens.
ah let me stop my whining and download more esprimg.zip .
I just want to know what caused it. was it an application, cause if that is the case then I want to know so no one else get hurt.
(one interesting note, avg antivirus said my device was infected with viruses. It said with the apps, I did not clean it. i uninstalled avg. I presumed it was a false alarm cause the phone is rooted with applications with high privileged) Oh well
---------------------------------------------------------------------------------------------------------------------------------------------------
oh well. back to the esprimg.zip
never tried RUU, if it comes in a esprimg.zip then i guess i can try. if not then i do not know how to use it with mine in its current state
S on (so no advanced fast boot options
Hboot only
no recovery.
clear memory
only productive thing is successful esprimg.zip updates
its the official update to froyo, and need HTCsync and the RUU from htc how the installs procces goes i dont really know, but im sure there is a RUU update that you can use to update via bootloader,
ok i got htc sync
and the official exe.
my pc only detects the device in hboot. The device will read usb hboot.
1 might fiddle around for 20 mins to see whats what.
.
If it was like a esmprimg.zip then it would seem more feasible.
goood luck hope you get your phone back up and running
well a week ago it finally booted. I felt that it was a fluke so I pressed the power button to reboot. I tried to turn it back on then it was stuck at the splash screen.
I am now starting to think it is a hardware problem. Either way the unrooted tmobile comet,yes it is small, is doing wonders. The battery life is way better then a iphone 3g.
Just remember guys, if you get an android phone, make sure it is a popular one. That way you are more likely to get support because of the bigger fan base. Oh well it was fun while it lasted. The only thing I hate is that i could have gotten an xbox 360 for the same price. oh well, thanks for the assistance. i will lets you know any further updates.
Alright. For starters, xda has been VERY VERY helpful to me over the past few months and I thank everyone who has ever contributed to a question or a discussion I have read. That being said, this is my first post. I watched the newb video, read many forums (both xda and others), google searched, read some more threads, kept reading threads, tried some methods described in some threads, bookmarked some interesting threads for if my phone ever works again, and read some more threads.
I am not saying the answer is not already out there, I am saying I have reached my resourcefulness cap.
Anyway, to the root of the problem: I'm not entirely new to rooting, and am comfortable using recovery and hboot to flash roms. I also had a nandroid backup! for SOME SILLY reason, while in my clockworkmod recovery this morning (maybe slightly due to being half asleep which is why I now recommend being fully awake before entering hboot or recovery or rom manager....etc) I formatted the system on my phone. I THINK.
My phone will now load up to display the bootloader, and go into recovery mode, and flash roms, but when I flash a rom, nothing changes. If I boot my phone up, it will show a notification bar at the top like usual, a stock wallpaper, and that is IT! it will show a message notification and missed call icon since I have them, but the touch screen will not work. The rosie buttons at the bottom do not show up (i.e. phone button or all aps button) no apps appear, no clocks except for in the notification bar... hardkeys have no effect (home button search button menu or back) and volume keys will not work. The lock button will only lock and unlock the screen, not power off or reboot or anything. If plugged in at this point, it is charger only.
So, I can take the micro sd card out and put files on it from my PC via a microsd-usb converter thing...
I have tried putting new roms on the sd and flashing them from recovery, no effect. Tried the RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe program, it always says that my phone has below 30% battery and will not continue (this is not the case as I have two batteries both have been fully charged because the phone will still charge them...)
And I have tried putting PC36IMG.zip files on my sd card to no avail.
I am thinking that the system was wiped because it seems like there is no boot image on the phones internal memory itself. I am currently looking for a way to place a boot image on the sd card to possibly flash it or some sort of update.zip so that my bootloader will ask me to update upon reading it.
Sorry for the long post, and ask any questions I will answer as best I can.
I am posting preemptively to the boot image adventure so that if it does not work, maybe I can have some help finding a solution by then.
I was going to take my evo to the sprint store since it is under warranty but if they go into recovery they will see clockworkmod recovery.
Thanks to all for any form of guidance!
I did just notice in my Bootloader menu (HBOOT-2.10.0001) that it says Supersonice evt2-3 **** S-ON
I don't know how because I thought it was a requirement that it says S-OFF to be rooted and flash roms, but I have definitely flashed roms before and gained su access to applications and such. BUT since it says S-ON would it then be covered by the warranty if it is not rooted?
Thanks again.
I you want to flash a boot image, you can take the boot.img from an RUU for the firmware you are, place it in your adb tools folder, then flash it using the commands:
fastboot flash boot boot.img
fastboot reboot
I'm not sure how to identify what firmware I am. Unless your talking about the Hboot version? and also, I can't place anything in any folder except onto my sd card. I have no access other than that to the phone. On the sd card there are no files except for what I put on there.
...aaand not to mention I don't know what adb is exactly...
Does your phone still go to clockwork when you go to recovery?
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Timeconsumer10 said:
Am going to try it right now, but will that work if I cannot tell my phone to allow usb debugging? i remember something about unrevoked needing that to root the phone in the first place. will update as soon as I try it. May not have time right now as I have to leave in about 15 mins. If no reply by 9:45, then I will be back online tomorrow morning. and thanks!
Click to expand...
Click to collapse
Welcome, but yes, you do need to have had usb debugging enabled, so we'll see how that goes.
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Timeconsumer10 said:
SUPER THANKS! S-OFF tool worked perfectly just flashed a rom and now so far so good. Will post tomorrow to let you know if everything works well. So much appreciated =) I would thanks a million times if i could don't know what to do without my evo.
Click to expand...
Click to collapse
Lol, it'd take you 200,000 days since you can only thank 5 times a day Though glad you're rooted now.
shortydoggg said:
Does your phone still go to clockwork when you go to recovery?
Click to expand...
Click to collapse
Yes it still goes to clockwork because its rooted.. now my screen legitimately does not work in certain areas of the screen (not responding to touch) so I'm going to try and get it stock stock stock unrooted and go for warranty replacement. Any ideas please let me know. Currently trying RUU Supersonic...
So, I got an ERROR [110] message from the RUU package its a file open error... :/ now i dont know what is up. Says I need a complete RUU package. Looking for another one or another option now.
If i boot phone normally now it just goes to a black screen with "htc" in the middle and "!" in a triangle in all four corners. Can't do anything from that screen.
If I boot into bootloader once where it says SHIP S-OFF at the top and instead of recovery and all those options it just says RUU but you cant do anything there... :/ I now, however cannot even get to the bootloader screen.
Could they tell it is rooted?
Maybe I could say I finally decided to do sprints OTA update that I've been denying for a while and this is the result.
Anyone agree disagree?
COCLUSION!
So. Since it has just the HTC logo and four error icons one in each corner... I took it into a sprint repair store. It would not boot into bootloader as a hard reset, so the guys at the store were stumped. They had actually never seen this before =). They asked me if I rooted it and all so I just played dumb. I told em I didn't know what that really was. They kinna explained it and I told em I didn't even have a computer (not a lie actually I sold mine and now use my dads or gfs lol). The logo on the screen was an oooold htc logo from like hero or so. So they just put it in the system as a wont even turn on type of thing and gave me a new phone since I was under warranty =) gonna see if I can live without root juuust for a little bit because work and school are gonna keep me busy for a while. I am certain to return though!
Can't wait to see what the devs can do by then!
Thanks to all for the help!
I'm a total newb at hacking on my device, and my device wont start. I've got a bone stock t889, never been rooted or tampered with. for the last month or so when i reboot the device, i'm greeted with something about my UUID's being messed up (please forgive my lack of proper terminology here, i can't remember exactly and thats what my memory serves) and to proceed with caution. So i click the "I'm feeling lucky button" and continue on with normal use. Things were'nt totally right, apps wouldnt work and would randomly shut off. I let the device die one night. it got stuck and wouldnt reboot - hangs on the "Samsung Note 2" screen. If i plug in the charger it hangs on the image of the drained battery (wont show the battery with a little bit of green).
Now really getting to the point ... Just for poking around's sake i gave it the 3 finger salute and brought up recovery - which worked. It however speaks of system errors. Here what i see verbatim `E:failed to mount /system (Invalid arguments)`. It also says something about `# Manual Mode #` and then some more failed to mount (same as before).
So, can someone shed some light on whats going on? I did a factory reset/cache reset if that matters. Ultimately id like to just wipe everything and a newer os on it like 5.0.
So my second question is, with my device in this jacked up state, can/how would i go about flashing everything?
Like i said, im new to all this and have googled around on lunch breaks and have come across all kinds of stuff on rooting the device / copying files to it first then going into recovery ... / using odin to just do it / < enter x amount of articels on the subject >. I'm not totally sure where which way to turn.
Thanks for any help!
i would say try to odin it back to stock 4.3 with the factory image available on sammobile.com. read up before you do it though. theres plenty of walkthroughs for it
thanks, but im still on 4.3. i've done nothing to the device. i'm gathering intel before doing something.
initial post was long winded, togonna boil it down:
- can i recover from an error such as "E:failed to load /system (invalid arguments)" ?
- can i recover my device if and only if its booting only into recovery.
i know its a possibility, but i dont want to permabrick this thing if i can help it.
thats why you odin it back to stock. it'll put it or should put it back to the way it was when you took it out the box
tmobile hasn't released 4.4.2 for our note 2's yet let alone 5.0, which is why i said 4.3
sounds to me like a hardware issue which odin won't fix but worth A shot to get it working.
other then that i don't know what to tell ya.
ok understood re the versions.
im on a mac, so i dont have odin. i tried jodin3/heimdal, but given the state of my device i can't connect to it. adb wont detect. however, if i putthe device into "apply update from adb" or "apply update from external storage" i can get adb to _see_ the device.
idk, so far no good.
@overdrive, what makes you think this is a hardware issue?
based on original post. system sounds borked to me. almost sounds like internal storage space could be having problems reading. i could be wrong though
you don't have access to a pc? borrow a neighbors long enuff to run odin, put your device in download mode and connect it. let odin find it and load the md5 file and start it. see if it has any problems when restoreing system partition. it'll tell you. if it works fine then your device is fine and will boot right up when it's done.