When I connect my defy to the computer even though it is enabled phone will not enter debugging mode.
Help?
Tried reset
Sent from my MB525 using Tapatalk
Did you try installing drivers from Motorola page?
I mean the phone itself wont show its in USB debugging mode
Yes I have the drivers
Sent from my MB525 using Tapatalk
If official t-mobile 2.21 hide the debug mode, then, does that mean, it can't be rooted?
I managed to get it into debug, after trying time after time in different modes, and rooted it. I was like nooooooo:0
Sent from my MB525 using Tapatalk
I flashed this firmware and had no problems enabling USB Debugging.
Related
Hi all,
After flashing Android Revolution HD 5.1.3, whenever I connect my device to the computer via USB, the debugging mode will not disable. And yes I have disabled the option from inside the apps menu. Any thoughts please?
aratsky said:
Hi all,
After flashing Android Revolution HD 5.1.3, whenever I connect my device to the computer via USB, the debugging mode will not disable. And yes I have disabled the option from inside the apps menu. Any thoughts please?
Click to expand...
Click to collapse
i don't have this issue, could you test wipe again?
Had the same issue at the time of that version (5.1.3) i made i work by disableing it in settings as you say you did then i just unplugged the usb cabel then reboot my phone plugged it back in to check and i worked
Hope it helped
Sent from my Desire HD using XDA App
I don't have that issue, but if I am allowed to ask, whats the problem with debugging mode "On"?
I use it a time on, and there are no problems with anything.
Sry read i like you could'n get it away
But i havent heard about ryst i should do anything
Its only to make your phone accept file changes in Android like when you flash flash new radio
But i hadent seen any problems will it one either
Sent from my Desire HD using XDA App
I have a different problem.
My USB Debugging mode is always on but my PC does not detect it as such
Also my phone does not say that it is connected in Debugging mode!
Any suggestions?
Hello Everyone.
I have a problem with this rom.
When I plug my mobile phone to your PC and select "USB Connection", you do not install the drivers of Cellular and therefore does not connect .. Why? What I do to solve?
Kenjo36 said:
Hello Everyone.
I have a problem with this rom.
When I plug my mobile phone to your PC and select "USB Connection", you do not install the drivers of Cellular and therefore does not connect .. Why? What I do to solve?
Click to expand...
Click to collapse
upppppppppppppppp
Get the drivers here Motorola Drivers and RSD lite
it's the same .. how do i solve this problem ?
What are you trying to connect exactly?
Sent from my MB526 using Tapatalk
I'm trying to connect the phone with your computer with the USB cable.
On the phone you have to select the connection type you want to use, first of all, u have to install the drivers, when your done, plugin your defy and wait for windows to recognize it. You will have an icon on the right thats is showing new hardware installation. Click on it and see how it goes(you have at least to install 6 or 7 of them). After that on the phone, select mass storage as connection type, and pay attention that debug mode is off(on cell phone go to settings, applications, development, and turn off debug mode) And thats it...
My computer installa all driver than mtp usb driver ... what can i do? Help me please!
Sent from my MB525 using Tapatalk
Kenjo36 said:
My computer installa all driver than mtp usb driver ... what can i do? Help me please!
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Sent from my MB525 using Tapatalk
Kenjo36 said:
Sent from my MB525 using Tapatalk
Click to expand...
Click to collapse
Please tell us what you see on the screen when you plug USB in computer. Give us detail.
Sent from my MB525 using xda premium
grannyrogers said:
Please tell us what you see on the screen when you plug USB in computer. Give us detail.
Sent from my MB525 using xda premium
Click to expand...
Click to collapse
Look here the Screen !
So I am trying to flash back to stock, but every time I go into Applications, it just shows all the applications, but no Development option. So I cant check Debug .
Also, Odin won't recognize my phone. I am on Frankenstein's from currently.
Help! I tried reinstalling my Samsung drivers with no luck.
Sent from my SPH-D710 using Tapatalk 2
In settings, is there a 'developers options'?
The Odin thing could be the driver, cable or USB port.
Sent from my SPH-D710 using XDA
Thanks! I found the Debug option under Developers.
It's not the drivers bcs I uninstalled them & reinstalled with no luck. When I plug the phone into the USB ports, the phone begins charging, but the computer or ODIN won't recognize it.
I will try to use another cord to see if it works.
Sent from my SPH-D710 using Tapatalk 2
Are you sure you have the right drivers? Have you ever been able to connect?
Sent from my ridiculously long named phone while firing up a Blu Kuban ---
Sprint Samsung Galaxy S II Epic 4G Touch
im confused. have you or haven't you been able to flash with ODIN??? for ODIN you need the phone, ODIN, a good cable, the drivers. but your phone has to be in download mode on boot its vol. down and vol up at the warning sign
ok i see you havent been able to flash with ODIN
remember debug mode and download mode are not the same thing!!!! ODIN (or heimdall) needs download mode
I have been able to successfully use ODIN. But for the last week, when I try to use Odin to, there is no yellow window COM# when I plug in the phone in download mode.
I thought it was because debug wasn't checked. But now it is and my computer still isn't recognizing my phone in download mode or not.
Sent from my SPH-D710 using Tapatalk 2
sounds like the cable or the port on your computer. DeBug has nothing to do with download mode btw
What Jamcar said, try different USB Ports or a different computer.
Even if you do not have the drivers installed, a different computer should still see it as an unrecognized device in case yours is having a problem.
Sent from my SPH-D710 using XDA
Does anyone know how to enable usb under service mode (*#9090#). Every time I enter service mode and select USB (option #1), it tells me to reboot to have the settings changed. After the reboot, it will automatically revert to UART (option #2). Is there a way to make it stay at USB (option #1). I am trying to unlock through usb data cable from fastgsm and I need to selection that option in order for the unlocking client to work.
thanks.
Do any of the options available using *#7642# help?
Sent from my SGH-I747 using Tapatalk 2
lordmorphous said:
Do any of the options available using *#7642# help?
Sent from my SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Nope. They are for qualcomm settings.
I'm trying to get the phone to stay at usb mode instead of reverting back to uart
Sent from my SGH-T679 using Tapatalk 2
I was trying to root my nexus 7 but didnt switch on usb debugging. It is now in a bootloop i suppose (stuck with the google logo and unlocked lock). I have searched on alot of forums and tried them but i think i failed because the usb debugging function is not switched on. I still can access bootloader as well. Please advise. Thank you.
Also, i tried to go to recovery mode but it will go straight to the bootloop
Don't you think it's the normal problem? Try fastboot -w in bootloader.
Sent from my Nexus 7 using Tapatalk 4
Try this tool(If you are using the Wifi version, stay clear if you are using a LTE version) :[TOOL] 08/23/13 One Click Factory Restore (dead or alive) updated w/ JSS15Q images, a lot users reported that it works very well for restoring bricked/bootlooped N7s, I once used it to wipe my unlocked & rooted N7 and go back to stock and it worked like a charm.
NovaSense said:
Try this tool(If you are using the Wifi version, stay clear if you are using a LTE version) :[TOOL] 08/23/13 One Click Factory Restore (dead or alive) updated w/ JSS15Q images, a lot users reported that it works very well for restoring bricked/bootlooped N7s, I once used it to wipe my unlocked & rooted N7 and go back to stock and it worked like a charm.
Click to expand...
Click to collapse
Thing is, my usb debugging is disabled
Sahmadi said:
I was trying to root my nexus 7 but didnt switch on usb debugging. It is now in a bootloop i suppose (stuck with the google logo and unlocked lock). I have searched on alot of forums and tried them but i think i failed because the usb debugging function is not switched on. I still can access bootloader as well. Please advise. Thank you.
Also, i tried to go to recovery mode but it will go straight to the bootloop
Click to expand...
Click to collapse
When you access bootloader, do you see the "START" option on the right of the screen with the arrows going up and down?
Sahmadi said:
Thing is, my usb debugging is disabled
Click to expand...
Click to collapse
You don't need USB debugging for fastboot operations. As a matter of fact USB debugging is only used to conveniently boot the Nexus into the bootloader, so you don't have to press any buttons on the device.
Guhrasoh said:
You don't need USB debugging for fastboot operations. As a matter of fact USB debugging is only used to conveniently boot the Nexus into the bootloader, so you don't have to press any buttons on the device.
Click to expand...
Click to collapse
Indeed. That's not the problem.
Sent from my MB860 using xda app-developers app