I recently installed the aforementioned cab file and lost the stock slide to unlock on my Touch pro 2. I havent done any big changes. I use the stock HTC Sense and stock wm6.5 rom. I tried uninstalling the cab but it didnt revert back. any ideas?
You may have to hard reset
I was thinking about that... I just got everything setup the way I like it too.
I tried uninstalling and reinstalling and it came back but only if i set a pin code lock but as soon as i slid to unlock and typed in my pin code the slide to unlock never showed up again until the pin code timed out and required me to enter again.
Nevermind. I figured it out. I used Tarkims Rhodium KBD control and was able to remap it to get back my lock when i turned the screen off.
Related
Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...
I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.
Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T
Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.
southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.
is it possible to enable the unlock slider without having the pin entry screen pop up afterwards?
to embelish on my issue I am using the latest offical HTC wm 6.5 rom and have tried to edith the registry but changing the reg key for autolock dosen't seem to have any effect. I also tried Advanced Config 3.3 but it's not showing the autolock preferance as an option under the screen heading. I am currently using a pin to keep the screen locked but i'd like a more snappy alternative
try going to settings\lock and uncheck the prompt if phone unused for...should take car of it!!
unfortunatley that setting simply takes away the slide to unlock screen completely. It seems to only appear when I have the pin code enabled :s
I tried to call the lock function when the power button's pressed but the button assignment section on my phone only shows one button for some reason..
Have found my solution for anyone else who had difficulty finding this on the forum heres the link http://forum.xda-developers.com/showthread.php?t=386451 works like a charm on 6.5
I'm going mad here trying to find a screen Lock suitable to my needs. Can anyone please help? I want a simple screen lock, nothing fancy, no bells'n'whistles, but with the following two essential features.
1) Screen Lock is quickly unlocked with a simple screen swipe as soon as I either power on or slide open the device (ideally slide-opening would automatically unlock without requiring a swipe).
2) When running on external power the screen should unlock automatically and remain unlocked.
I've now auditioned PocketShield, Sunscape, TouchLockPro and S2U2 all of which may have one or other of those features, but none have both.
Can anyone please recommend anything else? Thank you.
1) In Pocketshield you can auto unlock by sliding QWERTY out if you create the following reg key: HKEY_LOCAL_MACHINE\Software\Pocketshield\ROTATE=1 (DWORD)
2) There is an option for it in settings.
Thanks for that. I've decided to give PocketShield another go and am auditioning it at the moment. Also I've changed my UI from Winterface to Spb Mobile Shell 3.5 because I wondered whether Winterface wasn't working well with PocketShield.
But here's my issue with PocketShield, perhaps somebody can please help?
If I open the slide keyboard I am able for a second or two to use the device as if it were not locked, before PocketShield "remembers" that is supposed to be on and then suddenly the device gets upset, slow, stuck, until I can find and unlock pocketShield. If I first power on and then slide open the keyboard, everything is fine, but everything stays in portrait, even though the keyboard is open. I can unlock PocketShield properly (though sideways) but then everything else is displayed in portrait, even though the keyboard is open.
I tried the reg tweak suggested, but found that that just caused even more confusion; portrait trying to change the landscape at the same time as the UI was trying to appear, at the same time as PocketShield was trying to put up its lock screen, basically chaos!
Any thoughts anyone, please?
My S2U2 v 2.42, has both of those options. Just go to Settings>Others
1. Action when connect to power>Unlock
2. Unlock when Keyboard is opened>On
Thanks. I've been trying out PocketShield all day and it seems that in its simplest terms there is a delay between switching on the unit and PocketShield realising it should be locking the screen, during which time it is possible to start an action which is then instantly stopped when PocketShield kicks in. Ridiculous.
I'll give S2U2 another shot now, cheers.
Smart unlock, its in the software worth installing section, does exactly what you want
I'm getting very frustrated here and beginning to think that my problem is nothing to do with one screen lock program or another, but with my unit.
Whichever screen lock I install, roughly 60% of the time the lock works as it should, but about 40% of the time there is a short period between powering on and the screen lock preventing me from doing anything. During this time it's possible to use the unit normally for a second or two until the screen lock kicks in, at which point often the unit gets confused, actions jam, and I often end up having to soft reset.
With all of the locks I've tried, if I open the keyboard and THEN power on, this also causes confusion.
Can anybody possibly shed any light on all this, please?
Could be that one of your installed applications is subscribed to the power on event and performs a very intensive processing each time device is turned on, delaying other subscriber apps such as lock screens. You might want to try uninstalling one by one to see if any culprit. Last resource is hard reset.
Thanks Pckshd. To be honest I've just had a rough day with the phone: it froze last night and on soft reset wouldn't boot up. This morning was the same story so eventually I was forced to do a hard reset. Then my most recent backup wouldn't restore, claiming there wasn't enough memory in the phone (how can that be? It was backed up from the phone!). Eventually I had to rebuild everything and right now haven't dared install any of the screen lock programs!
Is there not a registry entry anywhere that would show me which programs are taking priority over power on? My UI of choice, Winterface, as its own screen Lock, which is almost 100% reliable but regrettably continues to run went on mains power (I want one that unlocks on mains power, the desired feature that started all this off in the first place).
My phone was in my pocket, a reminder went off, I left it, thinking I would just let the phone go back to sleep and dismiss the reminder later.
When I got out my phone, the sliding lock screen was gone, and now when I lock the phone by holding the end call button, the Old WM unlock appears as a soft key in the bottom right corner. After pressing it you get the gray screen asking if you want to unlock.
How do I get the Sliding Unlock Screen back?!
been trying to get it back for hours now....
(phone has stock Tilt2 Rom)
no one sure what happened...
Ditto!
This happened to me today! Cannot seem to change it back to the slide lock. Does anyone know how to fix this issue? Please help!
I installed HD mini lock. Not bad...
msteenwordpower said:
This happened to me today! Cannot seem to change it back to the slide lock. Does anyone know how to fix this issue? Please help!
Click to expand...
Click to collapse
I ended up doing a Hard eset to get it back...cause no one responded...annoying but it works.
I then installed the trial version or PocketShield...and it happened again...but pocketshield is working great to keep away accidental pressing of stuff in my pocket.
I tried Pocketshield, but just kept getting error messages. I want the end call button to turn on a slide lock... and I'd prefer to not do a hard reset...
msteenwordpower said:
I tried Pocketshield, but just kept getting error messages. I want the end call button to turn on a slide lock... and I'd prefer to not do a hard reset...
Click to expand...
Click to collapse
try anista endkey:
http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=709124
or else smabergs action screen, which give a similar set of options to anistas end key only you access it by holding down the power button. Both of these should lock with your default lock application.
If you're looking for an alternative program to the default, try s2u. you can find a link in the continuoulsly updated apps worth installing on the tp2 thread.
Edit: OK, smabergs action screen doesn't have a lock option on it... but whatever it was based on did. There is a link to that application in the smabergs thread, i think.
I know the OP has hard reset his phone to fix the issue, but just in case anyone else is having this problem, the following reg key is probably to blame:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen\Enable
Default Value: 1 (for Sliding lock screen)
Changed Value: 0 (for soft key lock a la wm6.1)
I found this because I actually WANTED to disable the default WM6.5 lockscreen as I prefer the soft key unlock, partly because of the memory the sliding lock uses, and also because I want to be able to see the gorgeous sense 2.5 interface when I turn my phone on to see the time
There's also a "ShowLockScreenPicker" value on my phone that is set to 0, not entirely sure what that does though.
Bit late I know, sorry! :/
jamiemckee said:
I know the OP has hard reset his phone to fix the issue, but just in case anyone else is having this problem, the following reg key is probably to blame:
HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\LockScreen\Enable
Default Value: 1 (for Sliding lock screen)
Changed Value: 0 (for soft key lock a la wm6.1)
I found this because I actually WANTED to disable the default WM6.5 lockscreen as I prefer the soft key unlock, partly because of the memory the sliding lock uses, and also because I want to be able to see the gorgeous sense 2.5 interface when I turn my phone on to see the time
There's also a "ShowLockScreenPicker" value on my phone that is set to 0, not entirely sure what that does though.
Bit late I know, sorry! :/
Click to expand...
Click to collapse
Tried this & I still haven't gotten my slide to unlock back, any other possible solutions? Besides a hard rest that is.
It is related to pocketshield, everytime I install an update I have to go into the system lock settings display tab and switch it from windows classic to default.
My touch screen won't respond to touch or the stylist. This just happened but I am beginning to see some bleed on the screen so I know it's a hardware issue.
Got a new one coming to replace it but here's my problem. My settings are set to automatically lock the screen after a period of time for security reasons and to help prevent pocket calls! Does anyone know a work around with the keyboard to unlock the screen?
Most of the software I loaded is on my PC but whenever I rebuild a phone it's always good to look at what is in the thing via "remove program" option. Needless to say, I can't get there without unlocking the screen.
I tried my magic wand and threatened the phone by telling it I was going to replace it with an iPhone but so far... nothing works.
Thanks,
Rick
The lockscreens are based on touch input. The only option I know of to recover your data is to replace the digitizer.
AFAIK, doing that on Windows Mobile 6.5 Stock is completely impossible. If you can get past the slider screen, you can use the numbers on your TP2 keypad and press enter. But I'm running 6.1 (makes me feel better being used to ye olde Pocket PCs), so I can't verify anything.