I'm going mad here trying to find a screen Lock suitable to my needs. Can anyone please help? I want a simple screen lock, nothing fancy, no bells'n'whistles, but with the following two essential features.
1) Screen Lock is quickly unlocked with a simple screen swipe as soon as I either power on or slide open the device (ideally slide-opening would automatically unlock without requiring a swipe).
2) When running on external power the screen should unlock automatically and remain unlocked.
I've now auditioned PocketShield, Sunscape, TouchLockPro and S2U2 all of which may have one or other of those features, but none have both.
Can anyone please recommend anything else? Thank you.
1) In Pocketshield you can auto unlock by sliding QWERTY out if you create the following reg key: HKEY_LOCAL_MACHINE\Software\Pocketshield\ROTATE=1 (DWORD)
2) There is an option for it in settings.
Thanks for that. I've decided to give PocketShield another go and am auditioning it at the moment. Also I've changed my UI from Winterface to Spb Mobile Shell 3.5 because I wondered whether Winterface wasn't working well with PocketShield.
But here's my issue with PocketShield, perhaps somebody can please help?
If I open the slide keyboard I am able for a second or two to use the device as if it were not locked, before PocketShield "remembers" that is supposed to be on and then suddenly the device gets upset, slow, stuck, until I can find and unlock pocketShield. If I first power on and then slide open the keyboard, everything is fine, but everything stays in portrait, even though the keyboard is open. I can unlock PocketShield properly (though sideways) but then everything else is displayed in portrait, even though the keyboard is open.
I tried the reg tweak suggested, but found that that just caused even more confusion; portrait trying to change the landscape at the same time as the UI was trying to appear, at the same time as PocketShield was trying to put up its lock screen, basically chaos!
Any thoughts anyone, please?
My S2U2 v 2.42, has both of those options. Just go to Settings>Others
1. Action when connect to power>Unlock
2. Unlock when Keyboard is opened>On
Thanks. I've been trying out PocketShield all day and it seems that in its simplest terms there is a delay between switching on the unit and PocketShield realising it should be locking the screen, during which time it is possible to start an action which is then instantly stopped when PocketShield kicks in. Ridiculous.
I'll give S2U2 another shot now, cheers.
Smart unlock, its in the software worth installing section, does exactly what you want
I'm getting very frustrated here and beginning to think that my problem is nothing to do with one screen lock program or another, but with my unit.
Whichever screen lock I install, roughly 60% of the time the lock works as it should, but about 40% of the time there is a short period between powering on and the screen lock preventing me from doing anything. During this time it's possible to use the unit normally for a second or two until the screen lock kicks in, at which point often the unit gets confused, actions jam, and I often end up having to soft reset.
With all of the locks I've tried, if I open the keyboard and THEN power on, this also causes confusion.
Can anybody possibly shed any light on all this, please?
Could be that one of your installed applications is subscribed to the power on event and performs a very intensive processing each time device is turned on, delaying other subscriber apps such as lock screens. You might want to try uninstalling one by one to see if any culprit. Last resource is hard reset.
Thanks Pckshd. To be honest I've just had a rough day with the phone: it froze last night and on soft reset wouldn't boot up. This morning was the same story so eventually I was forced to do a hard reset. Then my most recent backup wouldn't restore, claiming there wasn't enough memory in the phone (how can that be? It was backed up from the phone!). Eventually I had to rebuild everything and right now haven't dared install any of the screen lock programs!
Is there not a registry entry anywhere that would show me which programs are taking priority over power on? My UI of choice, Winterface, as its own screen Lock, which is almost 100% reliable but regrettably continues to run went on mains power (I want one that unlocks on mains power, the desired feature that started all this off in the first place).
Related
I've been having an unusual problem with my dash running kavana's 6.1 rom. Occasionally, more often now than usually, upon locking my phone or letting it lock on timer (i haven't tested extensively), it'll be in "locked out" mode but without the button option to unlock it!
The two softkey options are Start and Contacts instead of just "unlock". it's as if the lock program got minimized and the phone's still locked but i can't get it to the foreground to unlock it? that's my theory.
The phone still seems to be running: the clock keeps running, i can wake it up from black screen with any keypress even though it'll still be in locked-out no backlight mode.
Also, it can receive calls and i can answer, talk, and hang up, but nothing else.
It's not that annoying in that i can take out and put the battery back in to fix it, but the problem is that i can see text messages come in while it's locked... then when i put the battery in, they're gone! it's infuriating! i have no idea who sent them!
seraphic8x said:
I've been having an unusual problem with my dash running kavana's 6.1 rom. Occasionally, more often now than usually, upon locking my phone or letting it lock on timer (i haven't tested extensively), it'll be in "locked out" mode but without the button option to unlock it!
The two softkey options are Start and Contacts instead of just "unlock". it's as if the lock program got minimized and the phone's still locked but i can't get it to the foreground to unlock it? that's my theory.
The phone still seems to be running: the clock keeps running, i can wake it up from black screen with any keypress even though it'll still be in locked-out no backlight mode.
Also, it can receive calls and i can answer, talk, and hang up, but nothing else.
It's not that annoying in that i can take out and put the battery back in to fix it, but the problem is that i can see text messages come in while it's locked... then when i put the battery in, they're gone! it's infuriating! i have no idea who sent them!
Click to expand...
Click to collapse
Did you try a hard reset?
Hello everyone
After trying all the phone lock software out there I still can’t find what I’m looking for, what I’m looking for is so simple an icon in the start menu to lock the phone then r2u or t2u & unlock when phone rings and that’s it. I don’t like the idea of having to press the power button to wake up the screen to be able to unlock the device I’m also not interested in all of the other features that most of the phone lock’s have. Can someone help?
I have tried sensor lock I did like it a lot but I was unable to configure it and you could tell it was running in the background as the screen would jump. Plus throw in my case and a few beers and I know I’m going to drop it.
Many Thanks Jez
A list of phone lock programs you will need to search for them as some of the links aren’t applicable any more and I did need not save the ones that are working
Throttle lock
S2u2
Sunscape
Touchlock pro
Phone buddy
M lock
Organic lock
Pocket shield
Sensor lock
Lock me tight
Stylus lock
try Auto Lock (CSDEVCTRL), you could slide to the right on the screen to unlock the phone or use the windows default unlock.
Hello gbjack
Just tried that app and it’s just to much setting up and I don't think it’s going to do what I want it to do. Just hope someone is willing to write a program going by all the forums I have searched it will be popular
Cheer’s for the reply and suggestion
I tried many lock apps as well, but in the end the standard windows lock is what im using. No hassle, and it simply works as intended. I just press the "hangup" virtual button, and after the second vibration feedback i can be sure that the phone is locked. Doesn't get any simpler than that.
Then you have to try " WWE-Chobit Company SmartLock 1.7B". Only four or five options but it cannot lock your hardware key during call.
http://forum.xda-developers.com/showthread.php?t=505032&highlight=Lock
Then you have to try " WWE-Chobit Company SmartLock 1.7B". Only eight very simple options but it cannot lock your hardware key during call.
http://forum.xda-developers.com/showthread.php?t=505032&highlight=Lock
Just tried that app and it’s not even showing in programs for me to set it up, so I will have to keep looking, it amazes me that no one has written a program like I’m after considering it’s so simple.
gbjack said:
try Auto Lock (CSDEVCTRL), you could slide to the right on the screen to unlock the phone or use the windows default unlock.
Click to expand...
Click to collapse
This is good specialy the turn on bluetooth on call feature, but when we have an income call, the app takes ages to know what to do and the phone only begins to ring 5 secs after. Lockmelite it's the best one around but has a problem with alarms going to background after unlock. The "almost perfect" one is s2u but huge memory consuption makes background app's close or restart.
Hello jpl69
Tried this app found it to involved to setup and still does not do what I am looking for which is tap the screen to wake up so I than can unlock the phone using a s2u app. I find it bizarre that there are many apps to unlock the phone but you still have to push the power button to operate them. Surely it can’t take much program writing to add this feature. Jez
We have to push an hardware ley to wake up our devices from a low battery consuption state (suspend mode) and unfortunaly only have the power and volume hard keys so if you want to wake up your device with a tap on screen you'll only have a couple of hours with a full charge.
Now it makes sense why the screen sleeps if the battery only last for a couple of hours. Just a shame that the power button is so fiddly to operate. Jez
Yes, and it makes no sense having an device lock app (except on incoming calls). I only use it because of my 2 year old son that found the little tiny power on key , and made a couple of phone calls.
P.S. with a registry tweak you can enable the volume keys to wake up your device.
May be this could be your appropriate application:
MortSaver
jez.stix said:
Just tried that app and it’s not even showing in programs for me to set it up, so I will have to keep looking, it amazes me that no one has written a program like I’m after considering it’s so simple.
Click to expand...
Click to collapse
It's not in the Programs folder, it's in the Settings Folder.
try smart lock 1.7b
biosxjj said:
try smart lock 1.7b
Click to expand...
Click to collapse
That is brilliant and can be found here.
Simple and effective (needs a reboot after install, and is found under settings.
Just to be helpful... here's the brilliantly useful Reg tweak to allow wake-up from the volume keys.
- HKEY_CURRENT_USER\ControlPanel\Keybd
- set key: defaultkeylock from 1 to 0
- softreset
LockMeLite is definitely my favourite (especially with the above tweak), but as mentioned already, the alarm snooze / disappearing to background problem is a constant frustration.
Hello flid
Sorry for the delay everyone just got back from Canada so been busy catching up and sleeping. So how do I go about tweaking the reg key? I know how navigate to the reg key on a computer but not on my mobile
I changed my left soft key to lock the phone on the Home start screen as it was doing nothing useful except jumping to a phone operators website:
HKEY_LOCAL_MACHINE\Software\HTC\Manila\HomeLSKPath = windows\Endkey.exe
HKEY_LOCAL_MACHINE\Software\HTC\Manila\HomeLSKText = Lock (or whether text you want).
You just need a windows mobile registry editor. There are several free ones. My current Dutty ROM has one inbuilt, but from what I can gather the popular options are Total Commander (free!), Schap's Registry (free), PHM RegEdit (which is built in to Dutty's ROM) and Resco Registry Editor (not free - but definitely the most finger friendly). There may well be others.
Has anyone else had the problem with the Tilt 2 freezing when locking the phone? It doesn't happen all the time; but every so often, it freezes on me and I have to reset the phone to get it to work again. I haven't come across a solid answer for why it does this, so in the meantime I've reverted the locking mechanism to the Windows classic version, not the Windows default version that comes set on the phone. I do like the idea of the sliding unlocking mechanism, but I don't want to deal with the freezing. Is there a fix for this problem?
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
thex said:
You are not the only one. I was wondering if it was S2U2.
I have been leaving my phone unplugged over night the past two nights to get a feel for the battery life. When I go to wake the phone in the morning it was either a blank screen or just the title bar before it froze. I had to reset to get the phone to work again.
Click to expand...
Click to collapse
I've had bad experiences with S2U2. I had installed S2U2 on my 8525, and I ended up having to do a hard reset. One day, after having to power down and restart the phone, it just wouldn't load. It got stuck in start-up mode. I don't plan to use S2U2 again. I'm not sure if the slide mechanism that comes standard with the Tilt 2 is related to S2U2 or not...
I am wondering if it is a conflict between the NEW WM lock slider and S2U2. I have a corporate exchange, so I have to use the PIN access.
I have the PIN set to appear in one hour if not in use. However, when using the WM slide locker, it ALWAYS reveals the PIN pad. If the PIN access did not appear after every WM slide locker, I would use it.
I changed the settings in for the WM lock to use the classic - thus eliminating the WM slide to unlock.
I will leave it OFF the charger tonight and let you know the results tomorrow.
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
thex said:
Switching to WM Classic for the lock screen seems to work.
The screen did not freeze when I went to turn off the alarm this morning.
So the solution to use S2U2 is to change the Lock screen on your device from Default to Classic.
Click to expand...
Click to collapse
Thanks for the follow-up. Yeah, I've done the same thing: switched from default to classic. Thanks again.
Screen Unlock Freezes on Tilt 2
I too had this problem right out of the box. I switched to the Windows Classic as prescribed. However, this prompted me to get out the hand held drill and put a small hole right in the side of the back cover. I found myself having to battle the back cover every time I needed to soft reset, plus I noted the stylus needed to be removed to properly seat the back cover upon reinstall. Now I simply pull out my stylus and stick it in my hole. STOP IT!
Buzz
Formerly MDA / Wing / Tilt... and now Tilt 2
Always AT&T
Screen Unlock Freezes on Tilt 2
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
I have seen a post similar to this pop up multiple times in the past month. This guy was specifically having problems with his mail client.
http://forum.xda-developers.com/showthread.php?t=634213
Personally I have only experienced this issue when the phone was next to my engine getting 400° temps blasted on it. Its hard to say the actual cause of the problem, but it seems in ideal situations (no 2000 e-mails or excessive heat) my phone is free of any freezing or strange behavior.
*edit*
also at the end of that post another user posted a work around that seems to be helping.
southOCTilt2user said:
I just recently purchased the HTC Tilt 2 from AT&T on 02/15/2010 and for a few times I can successfully use the screen lock and unlock feature but then it stops working and I have to go press the soft reset button. This is constantly a problem now. When I try to go and unlock my phone it allows me to move the little lock icon to the left or right but the screen remains locked.
I appreciate the suggestions to dumb down to the Classic mode but this is not acceptable for a brand new device. I hope HTC comes out with a hotfix for this soon! We need to make this issue known to HTC so they can begin debugging immediately. Or do I have a defective phone and I need to return my phone?
Click to expand...
Click to collapse
After returning my first HTC Tilt 2 phone and I got a second one, I got the same problem again.
I think I found the screen lock bug for the HTC Tilt 2 that I am able to reproduce. The problem is when I enable the Owner Information [Identification information or Notes] to display when the device is turned on and then try to slide the lock icon it will not unlock the phone.
HTC, please look into fixing this bug. Thanks!
Here are the steps to reproduce the problem:
1. Press the Windows logo start key (the second key on the bottom of your phone).
2. Choose Settings.
3. Choose Personal.
4. Choose Owner Information.
5. I populated everything on the Identification tab as well as a note to contact me on the Notes tab.
6. Choose the Options tab.
7. Check mark either the Identification information box or the Notes box.
8. Click OK
9. Now lock your phone by holding down the end call button.
10. Power off your phone.
11. Power on your phone.
12. Try to unlock your phone right away by sliding the lock all the way left or right.
13. You can slide the lock icon all you want but you will never get to unlock your phone.
14. You now need to soft reset your phone by taking the back cover off and using the stylus to press the side reset button. :-(
I hope this makes it into a downloadable bug fix. In the meantime, I have disabled (unchecked) any Owner Info notifications on device power up. I really miss having this on device power up as my old 7 year old Nokia phone was able to do that without a problem.
Hi,
My phone keeps on living its own life in my pocket and really enjoy calling random people on my behalf. This is getting more and more irritating, and I would really love to be able to have it locked as soon as I suspend it.
I am using the official HTC ROM with WM6.5 WWE (and want to stick to this one). I also want to use the default WM6.5 lock screen which is perfect for my needs.
I allready tried a lot of solution presented on XDA, but none was perfect so far.
-HKCU\ControlPanel\BackLight\AutoDeviceLockEnable to 1. This solution seems to be the best, as it is built-in and light; but it doesn't work at all; the phone does not lock itself
-I tried DeviceLock from XDA, which didn't work either
-I also tried Autolock, which work quite good as long as I don't resume my phone with the sliding keyboard; after that I have to unlock it manually to get it working again...
-I also tried to add a PIN code, but this is really inconvinient for my use...
If you were able to successfuly use one of those solutions (or maybe even a new one), please let me know; you'll save my phone's life!
Thank you!
I haven't tried it, but HERE is another called LockDevice
i have always used s2u2. didnt use any of the fancy stuff, just as a screen lock. good thing is that u can set it to auto-off ur phone after n seconds. i set to 5s. so i dun even have to press the power button to off the phone. just map s2u2 to a shortcut button or softkey and it will off my phone 5s after activation. when u received and sms or miss a call, good thing is ur phone remains at the s2u2 screen, and it will turn off ur phone after 5s also.
PocketShield works great but you gotta buy it after a trial.
SecretAgentMan said:
I haven't tried it, but HERE is another called LockDevice
Click to expand...
Click to collapse
Woaw this was exactly what I needed!
Very light and doing what it is supposed to do; thank you very much!
EDIT: Now I am looking for pretty wallpaper (which also work in landscape) for my lock screen, any advice?
LockDevice doesn't work for me for some reason.. It does if I use the power button, but if I use a software "Power Off" shortcut it does not.. And I use the shortcut 98% of the time to turn off the phone via hitting the End button twice or tapping my right softkey at the Today screen. If I use it, the phone doesn't lock at all.
I continue to use S2U2, which works just dandy, but it's pretty resource intensive. 3.2m of ram, although I personally have no problems with battery life etc using it.
I use CSDevCtrl its got loads of options and if you want to simply lock the device when you switch the screen off or after a period of time its easy to do so.
edit: I just realised that this is now called auto lock and may be the one you referred to in the OP. If it is just to let you know I don't have to unlock again after keyboard slide out so it may be worth double checking the settings.
yep reg settings have no effect. I use SmartLock (easy find if you search for on XDA) with WM6.5 lock and Suspend Lock enabled. The WM6.5 lock screen is awsome.
My favorite has become TouchLockPro. Can be set to no lock is there is light on the sensor, or external power, and using the G-Sensor.
Hello,
I have TP2 with TMobile stock Rom. I'm using S2U2 for locking device when inactive.
The problem is that if the device is locked (due to inactivity) and when I unlock it, then it always goes to the home screen. I have disabled "go to homescreen" inside S2U2 settings, but still it goes to home screen.
Also if the screen is displaying certain applications like folderview, blackjack game and its locked->unlocked then these tasks run in background and are not visible using "Quick Menu" from icon area of the titlebar. I have to run the taskmanager and kill these tasks.
Any way to fix it. Other tasks like resco photo manager, htc album, coreplayer etc are OK. They do show up in quick menu.
Thanks
i tried S2U2 (and uninstalled it) and I'm not sure what purpose it serves on the TP2. The power saving locks the screen and it doesn't turn back on unless you press power again. Isn't that what S2U2 accomplishes? My Diamond screen would turn on at random, so S2U2 would be necessary with that phone, but the TP2 (in my stock Sprint ROM) has that functionality built in. Are people using this program by habit?
I think mainly because it has "Slide to Unlock" like the iPhone, .. people are fond by the iPhone, ....
in the TP2 (with Windows Mobile 6.1) there wasnt such thing (slide to unlock) (i think), So it would make sense to use that program, However, in Windows Mobile 6.5 that feature is there (Slide to Unlock)
Also, if you ever run the phone under a magnet (perhaps sliding it through a magnetic-clasped holster), the phone wakes instantly (if the reg tweak/fix was not made). That was a reason why I used S2U2 on my phone before (I now use TouchLockPro).
See_u_then, which version of S2U2 do you have? I was using v2.12 before I abandoned the app, and I don't remember encountering that problem with that particular version.
I'm using version 2.20
see_u_then said:
I'm using version 2.20
Click to expand...
Click to collapse
Ummm, okay... Would you like to try a different screen locker? I don't know, but S2U2 does have a lot of issues, and I abandoned it because it wasn't very stable and reliable.
If you would like to try another screen locker, TouchLockPro has been great for the past 1 1/2 weeks I've used it! The zoombar lock is great, and you can unlock the phone at the same screen you left it. Of course, you don't get the whole iPhone unlock look, but at least the zoombar gets put to good use (plus, if someone "borrows" your phone, they wouldn't know how to unlock it)!
PM me if you need help with TLP because, imo, the instructions at the developer's site are a little confusing.
BTW, happy new year to everyone!
The reason for using S2U2 is because with WM6.1 (and maybe 6.5, idk) when you recieve a text, the phone unlocks itself..unless you have it "Windows Locked" (actually going in and pressing "Lock"), so there is no very simple easy way to just lock and unlock the phone..and have it stay locked during texts and calls. S2U2 not only emulates the amazing iPhone lock UI and appearance, it also makes it much easier and faster than using the default lock, and solves the problem of not having a way to actually KEEP it locked when recieving texts and calls and other alerts. I personally LOVE S2U2.
Now, to fix your problem, DISABLE TouchFLO3D. TouchFLO3D is the sole cause of every problem on the TP2..at least for me. VERY glitchy and unstable and unuseful. It interferes with almost every app and customization I installed. Once I disabled it, all my problems were solved (including the exact same one you're having here.) It's beautiful and flashy.....but it has several issues including its interference with S2U2. So I've since kept it disabled completely. The standard WM interface may not be as finger friendly or as flashy, but it's far more reliable and useful...at least for now.
Hanson68 said:
i tried S2U2 (and uninstalled it) and I'm not sure what purpose it serves on the TP2. The power saving locks the screen and it doesn't turn back on unless you press power again. Isn't that what S2U2 accomplishes? My Diamond screen would turn on at random, so S2U2 would be necessary with that phone, but the TP2 (in my stock Sprint ROM) has that functionality built in. Are people using this program by habit?
Click to expand...
Click to collapse
except that S2U2 automatically locks the phone, it does NOT by default otherwise.. You'd have to select the Lock option. Also S2U2 has the PIN input which is nicer than the WM one, and looks nice too.
There is a program (LockDevice?) which sort-of accomplishes the auto-lock that S2U2 does but I VERY often find when I turn the phone back on after turning it off and leaving it a few minutes that it is NOT locked, which leads to random programs being launched, phone calls made, etc.. S2U2 always locks.
Don't like S2U2? Don't use it.
MEH, dup, nutty forum.
MEH, dup, nutty forum.
see_u_then, i am having the same issue with s2u2 on my tp2 with sprint stock rom. i live s2u2 in that i have it set to wake up, but not unlock, whenever any type of notification arrives (minder. email, text, etc.) i've found that it saves me lots of time insteade of having to go to each app every time a event comes in. i've managed to tweak everything but the "wake up to the home screen" issue, so if you find a fix let me know. this issue is especially a pain when a call locks the screen because im then at the home screen and if i need to do key input for the call i have to punch a bunch of buttons to get back to the call screen,
[email protected]
Indeed, I turned off HTC Sense and now the phone no longer unlocks itself. Thanks for the tip!