I just tried flashing a few different kernals but the Netarchy and Ziggy's caused lagginess and lines running vertically across my screen, and the Stock HTC #15 wont let 4G enabled (I live in a 4G area) So I want to make use of it ... any suggestions?
The lines may go away if you just lock and unlock the screen. This happens to me every time. Try ziggys kernel.
Sent from my PC36100 using XDA App
Thanks. Only problem is my Evo has also been acting funny, turning on and off randomly... the lagginess persisted with Ziggy but I at least was getting clear 4G.. so I'm kinda stuck between 4g or normal performance at the moment
You using setcpu?
Sent from my PC36100 using XDA App
Strange. I never had any problems with Net's kernels. Which one did you try? I am running Myn's RL5 (between betas) and have excellent 4G, speed (no lag), and good battery life. Try the one in my signature if you haven't yet. Also try the universal, No UV, NO HAVS, CFS version. My Evo has never liked being undervolted and that may be the problem you are having.
netarchy is so slow for me, unbearable. To the point where I had to flash back to ziggy.
Sent from my PC36100 using XDA App
I just discovered half my screen lags when I use ziggy...must get stock back then :/
Sent from my PC36100 using XDA App
I am using netarchy-toastmod-4.2.1-cfs-bfq-havs-more-smartass-universal-signed on my Myn's RLS5 and I dont have any troubles. Give it a try, if not it could be something besides the kernel
My phone can't handle more havs for some reason. It freezes and reboots. Only two kernels work for me right now without putting lines through my screen.
Sent from my PC36100 using XDA App
Related
I can't tell if my phone was getting this way before I upgraded to Fresh 3.4.0.1 or if it happened after the upgrade... but my phone is sluggish. I am running the stock kernel with no OC. Sometimes I'll check my CPU with SystemPanel and it says it's constantly around 95-100% which a reboot fixes.
Is this a problem with Fresh? I have been more than happy with Fresh 3.3.0.1. No complaints at all.
Or is this a problem with a specific app? My wife loves to play Bubble Blast on my phone, and when she does my phone gets VERY warm and drains my battery like no other.
Has anyone else had problems after Fresh 3.4.0.1?
Does anyone else play Bubble Blast and have the same problem?
Thanks.
I was running fresh 3.4 for a day or two and it seemed quicker than cm6 for me.
Sent from my PC36100 using XDA App
I've tried fresh 3.4 highly doubtful its the Rom, you can't see which process is taking up all the CPU cycles?
Sent from my PC36100 using XDA App
tlr386 said:
I was running fresh 3.4 for a day or two and it seemed quicker than cm6 for me.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yeah? Would wiping cache/data help? Or is it possible that Bubble Blast is just a rogue app using all my CPU power?
nsxla said:
I've tried fresh 3.4 highly doubtful its the Rom, you can't see which process is taking up all the CPU cycles?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Nothing looks like it is using more CPU that is should. I'm not having the problem right now, but normally it just says CPU usage is at 90+%
I just rooted my incredible and I'm using the kernel that came with it stock. I disabled perflock and I left the max speed to 998 and the min speed to 245.
When I'm not doing anything on my incredible, I see that the speed constantly changes from the max to the min. Not even one second passes before it just goes back and forth, back and forth. Is this normal?
Coming from the d1 where it would stay at the min when idle, I'm not sure if what's going on with my incredible is normal.
Sent from my ADR6300 using XDA App
Yes that's normal. For better battery life, I'd try a kernel with smartass governor. It spends more time on the lower frequencies.
Sent from my ADR6300 using Tapatalk
Switching to a different kernel will give you the ability to overlook//underfoot the system needed.. this in turn increases battery life.. kingklick, ziggy's, chad's kernel are all well known kernels.. you will want to play with different kernels.. not every kernel will be stable to overlook to certain speeds on certain Rom's.. switching kernels is almost as addictive as switching roms.. always nandroid before flashing anything..
Sent from my ADR6300 using XDA App
Typos on my end.. underfoot = undervolt.. overlook = overlook.
Sent from my ADR6300 using XDA App
Will those kernels work on my rooted stock incredible?
Sent from my ADR6300 using XDA App
Yea! By stock i'm assuming all you did was root. I am currently running SkyRaider 3.5 Sense along with
"2.6.32.26-ubcredujuerbek-12082010 [email protected] #11"
I will edit with links to these two items.
SkyRaider 3.5 Sense - SkyRaider
Chad's Kernel - Incredikernel
My phone runs amazingly fast with sense but yet, even with heavy usage (Texting constantly, on the internet, gmail, even Fring) I can go an easy 24 hours on one charge. If my phone stays screen-off idle I could last at 95%-100% for several hours.
Yes, all I did was root.
Does the chad kernel provide wireless tether and will i still need to disable perflock in setcpu?
Sent from my ADR6300 using XDA App
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
What he said ^^
Sent from my ADR6300 using XDA App
20twins10 said:
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
Click to expand...
Click to collapse
Not quite. I believe Lou's has some tweaks within perflock, so disabling it would lose those.
And most kernel devs, particularly Lou and the ones who use HAVS, advise against using SetCPU. I'd check with your chosen kernel thread for details.
Sent from my ADR6300 using Tapatalk
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
what rager said... ive put on kernels and ran em high only to get a "boot loop".. its tuff to get out of cause you need to get back into setcpu to scale back otherwise it keep on going.... i learned to put the setcpu app icon on my main screen so i can get there fast to scale back..
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
keith4321 said:
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
Click to expand...
Click to collapse
Some. Make sure it's a sense version if you're using stock sense.
Sent from my ADR6300 using Tapatalk
Mr. Rager said:
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
That exact thing happened to me...pissed me off like crazy at first I was clueless then I just did a restore
Sent from my ADR6300 using XDA App
Yeah, if you let it boot loop too long it'll hard boot, which is where the phone cuts off completely. That has happened to me, and it ruins apps.
Sent from my Incredible using XDA App
Okay so I disabled the battery tweak and just started using set cpu. My set cpu doesn't have a lot of profiles or options even. I would like to know if someone could point me in the right direction. Thanks in advance.
Sent from my PC36100 using XDA App
The profiles are user defined so if you havent made any, there won't be any to choose from. What are you trying to do?
I'm trying to make more profiles, or smarter ones. I wanna see what everyone else has..
Sent from my PC36100 using XDA App
Honestly, I don't even use profiles anymore, I just let HAVS do its thing. When I did use them, I used screen off @245 and low batt set to 15% @768.
A HAVS kernel?
Sent from my PC36100 using XDA App
jacoballen22 said:
A HAVS kernel?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yep. When my phone sleeps, it really SLEEPS. I can go all night without losing a single % point.
This site has two profiles setup for SetCPU
http://home.comcast.net/~evobenchers/howtos.html
I'm curious about what kernel to use. Kings#11 sucked, netarchy cfs was bad..and seems like the only one tolerable was stock but I need to have good battery power..I'm currently using ziggy471
Sent from my PC36100 using XDA App
I am getting great battery life with MikFroyo and stock kernel. If you use a HAVS kernel be careful overclocking it, increasing CPU speed with decreased voltage from the HAVS can harm your phone
Sent from my PC36100 using XDA App
I'm getting annoyed with these kernels. So far the only ones that work are ziggy471 and stock 17. I really want to switch to myns two point two rls 5. Problem with that is I don't want to upgrade my radio and lose something. So how do I upgrade without fixing the radios?
Sent from my PC36100 using XDA App
I updated my radios and then downgraded my PRI back to 1.77, its easy and works great.
Sent from my Evo
Alfa testing HDMI
MikFroYo V4.5
HTC #15
Amon's Recovery
I have a weird line in the screen after I reboot could you help me, the line appear after I clockwork a Rom thanks,does it have a solution
Mine does it all the time, its nothing to be worried about.
This happens to me too. Can only use stock or else it looks like garbage during videos or recording.
Sent from my PC36100 using XDA App
jacoballen22 said:
This happens to me too. Can only use stock or else it looks like garbage during videos or recording.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
I still have excellent recording quality.
Ok I didn't even record it was more like laggy when taking a picture. Haven't recorded something in awhile since I got my camera. Still ruins landscape YouTube videos.
Sent from my PC36100 using XDA App
What kernel are you using?
Ziggys, kings#11, ztest, and all of netarchys ones didn't work. They worked but they had the line towards the top. Like the frame rate in that line is horribly slow. Possibly sites it have something to do with clockwork?
Sent from my PC36100 using XDA App
OHHHHH i know exactly what you meant, its happened to me once when I flashed a netacrchy kernel. Yea that is definately the kernel, and if you get the lines, switch your kernel. You can try savaged-zen...they work for me nicely.
http://mirror.munkibizness.com/
So you had the netarchy problem too?
Sent from my PC36100 using XDA App
Well I had the problem running CM7, but yes, the netarchy kernel gave me the same problems, so I quickly flashed a new kernel, and good as new.
I switch the kernel and still havethe line please help
Are you wiping your cache and dalvik before flashing the kernel?
Haven't tried zen yet but all the other kernals get the line through them.
Sent from my PC36100 using XDA App
Everything and still
Same thing for me, even switched to amon. Still happens. We need help.
Sent from my PC36100 using XDA App
Its not the recovery, its the kernel. The same kernel I run for the same rom may not work for you or vice versa cuz every phone reacts to the differently. And you need to use either a sense/aosp kernel respectively, i.e netarchy won't behave on CM7.
Here is a list of kernels you can download and try : http://home.comcast.net/~evobenchers/downloads.html
These are savaged-zen kernels only: http://mirror.munkibizness.com/
These are ziggy kernels: http://www.ziggy471.com/downloads/
Also give a kernel 2-3 days to set in...you won't see an effect immidiately/
Still havethe line in thescreen ive flash calcukin
All the other kernels are making me get a line in my screen when scrolling. The only one that didn't do that was stock#17, can someone help me fix my kernel problem or least direct me to stock 17. Thanks in advance, I appreciate it.
Sent from my PC36100 using XDA App
You do know rls5 is out right?
What did you wipe before you flashed it? I would highly recommend using Calikulin's format all zip
Flash this, and then reflash the ROM. This should help you
Make sure everything is up to date (PRI, PRL, Radio)
Then flash a #15 kernel. That will fix your problem. Netarchy has a couple of good ones out and MS79723 has a really good SBC one out as well.
RLS4 is packaged with an outdated kernel, which when everything is updated causes screen tearing which is what you're experiencing.
Update everything, update kernel and you're good to go.
As an alternative, RLS5 has an updated kernel if you don't wanna go 3rd party with the kernel flashing, so backing up with titanium backup or my backup (both have free versions in the market) and then doing a full wipe and flash will also fix your problem.
Hope this helps.
The only thing wrong with 5 is me updating the radios. I didn't wanna do the full wipe for optimal use. The screen tearing happened on 5 and 4. Any kernal besides stock.
Sent from my PC36100 using XDA App
So that format all gives me updated software or what?
Sent from my PC36100 using XDA App
So I decided to just update my PRL and that worked. My phone is not lagging or tearing. I didn't think that would do the trick but it worked. Thanks guys.
Sent from my PC36100 using XDA App
i am having MAJOR problems with rls 5 though. i'll see if i can get them sorted out. if not, i'll post. i think caulkin's 1.8 extended data settings messed me up, bcuz now i can only get text messages while in a phone call, and i dont think i am getting 3g.
One reason why I just stuck with 4. My internet was slow AND I had that browser slowness 4 host file flashed..just went back to 4..
Sent from my PC36100 using XDA App