Okay so I disabled the battery tweak and just started using set cpu. My set cpu doesn't have a lot of profiles or options even. I would like to know if someone could point me in the right direction. Thanks in advance.
Sent from my PC36100 using XDA App
The profiles are user defined so if you havent made any, there won't be any to choose from. What are you trying to do?
I'm trying to make more profiles, or smarter ones. I wanna see what everyone else has..
Sent from my PC36100 using XDA App
Honestly, I don't even use profiles anymore, I just let HAVS do its thing. When I did use them, I used screen off @245 and low batt set to 15% @768.
A HAVS kernel?
Sent from my PC36100 using XDA App
jacoballen22 said:
A HAVS kernel?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yep. When my phone sleeps, it really SLEEPS. I can go all night without losing a single % point.
This site has two profiles setup for SetCPU
http://home.comcast.net/~evobenchers/howtos.html
I'm curious about what kernel to use. Kings#11 sucked, netarchy cfs was bad..and seems like the only one tolerable was stock but I need to have good battery power..I'm currently using ziggy471
Sent from my PC36100 using XDA App
I am getting great battery life with MikFroyo and stock kernel. If you use a HAVS kernel be careful overclocking it, increasing CPU speed with decreased voltage from the HAVS can harm your phone
Sent from my PC36100 using XDA App
I'm getting annoyed with these kernels. So far the only ones that work are ziggy471 and stock 17. I really want to switch to myns two point two rls 5. Problem with that is I don't want to upgrade my radio and lose something. So how do I upgrade without fixing the radios?
Sent from my PC36100 using XDA App
I updated my radios and then downgraded my PRI back to 1.77, its easy and works great.
Sent from my Evo
Alfa testing HDMI
MikFroYo V4.5
HTC #15
Amon's Recovery
Related
I just rooted my incredible and I'm using the kernel that came with it stock. I disabled perflock and I left the max speed to 998 and the min speed to 245.
When I'm not doing anything on my incredible, I see that the speed constantly changes from the max to the min. Not even one second passes before it just goes back and forth, back and forth. Is this normal?
Coming from the d1 where it would stay at the min when idle, I'm not sure if what's going on with my incredible is normal.
Sent from my ADR6300 using XDA App
Yes that's normal. For better battery life, I'd try a kernel with smartass governor. It spends more time on the lower frequencies.
Sent from my ADR6300 using Tapatalk
Switching to a different kernel will give you the ability to overlook//underfoot the system needed.. this in turn increases battery life.. kingklick, ziggy's, chad's kernel are all well known kernels.. you will want to play with different kernels.. not every kernel will be stable to overlook to certain speeds on certain Rom's.. switching kernels is almost as addictive as switching roms.. always nandroid before flashing anything..
Sent from my ADR6300 using XDA App
Typos on my end.. underfoot = undervolt.. overlook = overlook.
Sent from my ADR6300 using XDA App
Will those kernels work on my rooted stock incredible?
Sent from my ADR6300 using XDA App
Yea! By stock i'm assuming all you did was root. I am currently running SkyRaider 3.5 Sense along with
"2.6.32.26-ubcredujuerbek-12082010 [email protected] #11"
I will edit with links to these two items.
SkyRaider 3.5 Sense - SkyRaider
Chad's Kernel - Incredikernel
My phone runs amazingly fast with sense but yet, even with heavy usage (Texting constantly, on the internet, gmail, even Fring) I can go an easy 24 hours on one charge. If my phone stays screen-off idle I could last at 95%-100% for several hours.
Yes, all I did was root.
Does the chad kernel provide wireless tether and will i still need to disable perflock in setcpu?
Sent from my ADR6300 using XDA App
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
What he said ^^
Sent from my ADR6300 using XDA App
20twins10 said:
the non stock kernels all disable perflock already, you do not need to do it..
flash the kernel via clockwork, and you are set.. jump into setcpu and adjust some settings and add profiles.. you'll be golden..
Click to expand...
Click to collapse
Not quite. I believe Lou's has some tweaks within perflock, so disabling it would lose those.
And most kernel devs, particularly Lou and the ones who use HAVS, advise against using SetCPU. I'd check with your chosen kernel thread for details.
Sent from my ADR6300 using Tapatalk
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
what rager said... ive put on kernels and ran em high only to get a "boot loop".. its tuff to get out of cause you need to get back into setcpu to scale back otherwise it keep on going.... i learned to put the setcpu app icon on my main screen so i can get there fast to scale back..
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
keith4321 said:
http://forum.xda-developers.com/showthread.php?t=866736 can you install these with the stock rom. i wanted to experiment to get better battery life but didnt really want to install a different one.
Click to expand...
Click to collapse
Some. Make sure it's a sense version if you're using stock sense.
Sent from my ADR6300 using Tapatalk
Mr. Rager said:
Also, I wouldn't 'set on boot', at least till you find frequencies that your phone can handle safely. Otherwise, you'll get a 'crash' loop, where your phone starts up just fine, but once you go past the initial lockscreen it'll crash and reboot. Very annoying...
Sent from my Incredible using XDA App
Click to expand...
Click to collapse
That exact thing happened to me...pissed me off like crazy at first I was clueless then I just did a restore
Sent from my ADR6300 using XDA App
Yeah, if you let it boot loop too long it'll hard boot, which is where the phone cuts off completely. That has happened to me, and it ruins apps.
Sent from my Incredible using XDA App
I'm running back into the problem of custom Roms freezing on me, no FC's, just the phone freezing and requiring a battery pull to re-boot. I odin EC05 plus, let it boot and sit for a few minutes, reboot, let it convert, flash cwm purple, wipe, then flash whatever rom, and eventualy they all freeze.
The only roms to never give me that problem is CM7, MIUI and true stock.
Tried everything, except for not using the stock cable, but even still, cm7 and miui have no problem.
Sent from my SPH-D700 using XDA App
I've had the same problem with SRF 1.2...and I linked the problem to certain SetCPU settings like on demand and userspace and to undervolting to much in the higher OC'd frequency ranges...even though I've experimented wih these settings and found a somewhat stable medium...I still get the random freezes once in a blue...I don't know what else it could be.
Sent from my rooted, suited, & booted Epic 4G kno dat!
Right now I'm on SRF with the 1.1.1 Kernel, using setCPU 200-1000, cfq, and no undervolting at all. I was on the 1.1.0 Kernel using voltage control when I had it freeze. I've uninstalled voltage control and galaxy tuner. Oddly enough setcpu dosent fc when I go into the voltages, which it did a few flashes back.
Sent from my SPH-D700 using XDA App
What problems do you think Galaxy tuner was giving you...I'm using it right now?
Sent from my rooted, suited, & booted Epic 4G kno dat!
I wasn't sure, but I figured with using setcpu it would be best to uninstall it so there wasn't any sort of conflicts between the two.
Sent from my SPH-D700 using XDA App
I'm not sure I follow where the conflict btwn those 2 apps would be...once controls cpu speed, governing, and voltage...and the other controls screen brightness and sound attributes...not trynna be a smart ass I'm just trynna make the connection?
Sent from my rooted, suited, & booted Epic 4G kno dat!
In galaxy tuner there is some options for overclocking, as well as IO scheduling.
Sent from my SPH-D700 using XDA App
At any rate. Ill sell you my phone fully uv and tweaked for max battery and speed
Sent from my SPH-D700 using XDA Premium App
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Custodian said:
At any rate. Sounds like your phone is garbage. Make sure you enable journaling to help mend the fc's.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Skimp Killah said:
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
I'm wondering if maybe the 200mhz is whats doing it then, I always figured 200-1000 was stock, and the phone would only freeze when the screen was off. Right now I'm using setCPU with it set at 200-1000 with cfq IO scheduling. If I have more freezes I will try bumping up to 400-1000.
JohnCorleone said:
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
im currently undervolted with the aosp rom from dub with genocide's final kernel...200mhz is perfectly fine...if 200 is underclocked too low or other frequencies are too low...sod or freezes will happen with the frequency with the wrong voltage is reached..i have setcpu and voltage control together but mainly use the new setcpu...when idling, i see a 1 percent draw in 2 hours and 6 minutes...and use stability test whenever you underclock to see if it safe to use...just my 2 cents...
Just wondering if anyone is running setcpu with Synergy and what there setting are. I have never used this app before and am having a hard time finding out how to use it. Any help will be greatly appreciated!
I have it and they say the best thing to do is leave the main screen alone but make one profile. "screen off" set it to the lowest on both maximum and the minimum, and the % to 100.
Sent from my PC36100 using XDA Premium App
Also put ondemand
Sent from my PC36100 using XDA Premium App
I thought I heard set cpu doesnt work on 2.3 sense yet...am I wrong??
Sent from my PC36100
r.storm85 said:
I thought I heard set cpu doesnt work on 2.3 sense yet...am I wrong??
Sent from my PC36100
Click to expand...
Click to collapse
Works on mine
I didn't think it worked on 2.3 either, downloading now....
setcpu wont set the max on the synergy rom (RC2)
EDIT: fixed it.. you need to do perflock.. then you can set the max on synergy
I would just like to know which kernel works best with this rom as far as performance and battery life?
I'm running netarchy's golden monkey overclocked to 1.13,been a week or so and no problems so far.
Sent from my PC36100 using XDA App
Can you put a direct link as to where I can download the zip file?
Here's the thread. http://forum.xda-developers.com/showthread.php?t=1192796
Sent from my PC36100 using XDA App
Thanks I appreciate it
BrianBusby2038 said:
I'm running netarchy's golden monkey overclocked to 1.13,been a week or so and no problems so far.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
What kind of battery life are you getting?
I am using GM that is baked with the ROM and it works great. I tried Freedom and I received a lot of FC. I set SetCPU to 998/245 and I am getting around 15 hrs with moderate use.
So if i use the stock kernel and setcpu app with this rom, will this make any difference on performance &/or battery life?
Sent from my PC36100 using XDA Premium App
I'm getting 14-15 hours with light use.You can use setcpu with the stock kernel to enforce lower clock speeds with the screen off.The newer kernels may have it built in but I prefer to use setcpu so I know exactly what's happening.
Sent from my PC36100 using XDA App
TY! I got 15 hrs on stock and no setcpu, but something i did notice about this rom is the display goes to the top brightest setting on its own and the icons disappear from the home screen after a reboot.... but awesome rom so far!
Sent from my PC36100 using XDA Premium App
Havnt run into the brightness issue,for the apps disappearing,after a reboot,choose a scene other than the one you normally run and then change it back to the one you normally use and the icons will be back to normal.
Sent from my PC36100 using XDA App
Poonsense runs pretty good with it, also has the hdmi mirroring which i love to use
I have searched high and low but can't seem to find a definitive fix that works. I am on Decks 1.3 with SZ 2.21 Cfs havs kernel and am having the issue where I can't always get the screen to turn on right away. Sometimes it takes 3 or 4 pushes before it will actually turn on. I have tried different kernels, changing the minimum frequency, screen on/off animation change, etc. Nothing seems to be a permanent fix because its still happening. Does anyone know of a real fix that works?
Sent from my PC36100 using XDA App
legasus233 said:
I have searched high and low but can't seem to find a definitive fix that works. I am on Decks 1.3 with SZ 2.21 Cfs havs kernel and am having the issue where I can't always get the screen to turn on right away. Sometimes it takes 3 or 4 pushes before it will actually turn on. I have tried different kernels, changing the minimum frequency, screen on/off animation change, etc. Nothing seems to be a permanent fix because its still happening. Does anyone know of a real fix that works?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Tiatmat 3.3.7 (LEE) Kernal smartass oops I am not calling you a smartass... I ment the smartass governor
Tiamat 4.1.0 no issues
Support TrevE !!
jayshocka said:
Tiatmat 3.3.7 (LEE) Kernal smartass oops I am not calling you a smartass... I ment the smartass governor
Click to expand...
Click to collapse
I have 1.3D
Lee
And screen on profile and still get screen on lag. I just don't notice it much now
Sent from my PC36100 using xda premium
I have the same issue. I'm using deck's 1.3, tried SZ but Bluetooth wouldn't work. now on tiamat 4.1.0. Tried smartass v2, conservative, and interactive with the same issue.
I hit the button and I see the lights come on for the soft keys but the screen never lights up. Sometimes if I wait I will see the screen flash on then it'll well turn off and lock.
Sent from my PC36100 using XDA App
jabq said:
I have the same issue. I'm using deck's 1.3, tried SZ but Bluetooth wouldn't work. now on tiamat 4.1.0. Tried smartass v2, conservative, and interactive with the same issue.
I hit the button and I see the lights come on for the soft keys but the screen never lights up. Sometimes if I wait I will see the screen flash on then it'll well turn off and lock.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
1.3d LEE smartass 128/537. Car o dope tweaks no screen wake issues
I don't use any additional profiles ... just sharing my experience I hope some one may benifit
Sent from my PC36100 using XDA App
I did the car o dope tweaks and the lag seems to be gone....for now anyway.. phone feels much snappier too!
Sent from my PC36100 using XDA App
legasus233 said:
I did the car o dope tweaks and the lag seems to be gone....for now anyway.. phone feels much snappier too!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Still running good?
PS. Carodope tweak plus screen transition set to fast in spare parts=warp speed mind melt
Sent from my PC36100 using XDA App
It still does it but not nearly as often. Thanks for the advice! Ill give it a shot
Sent from my PC36100 using XDA App
legasus233 said:
It still does it but not nearly as often. Thanks for the advice! Ill give it a shot
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
what is your CPU set at? Are you using any other profiles
Sent from my PC36100 using XDA App