I have searched high and low but can't seem to find a definitive fix that works. I am on Decks 1.3 with SZ 2.21 Cfs havs kernel and am having the issue where I can't always get the screen to turn on right away. Sometimes it takes 3 or 4 pushes before it will actually turn on. I have tried different kernels, changing the minimum frequency, screen on/off animation change, etc. Nothing seems to be a permanent fix because its still happening. Does anyone know of a real fix that works?
Sent from my PC36100 using XDA App
legasus233 said:
I have searched high and low but can't seem to find a definitive fix that works. I am on Decks 1.3 with SZ 2.21 Cfs havs kernel and am having the issue where I can't always get the screen to turn on right away. Sometimes it takes 3 or 4 pushes before it will actually turn on. I have tried different kernels, changing the minimum frequency, screen on/off animation change, etc. Nothing seems to be a permanent fix because its still happening. Does anyone know of a real fix that works?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Tiatmat 3.3.7 (LEE) Kernal smartass oops I am not calling you a smartass... I ment the smartass governor
Tiamat 4.1.0 no issues
Support TrevE !!
jayshocka said:
Tiatmat 3.3.7 (LEE) Kernal smartass oops I am not calling you a smartass... I ment the smartass governor
Click to expand...
Click to collapse
I have 1.3D
Lee
And screen on profile and still get screen on lag. I just don't notice it much now
Sent from my PC36100 using xda premium
I have the same issue. I'm using deck's 1.3, tried SZ but Bluetooth wouldn't work. now on tiamat 4.1.0. Tried smartass v2, conservative, and interactive with the same issue.
I hit the button and I see the lights come on for the soft keys but the screen never lights up. Sometimes if I wait I will see the screen flash on then it'll well turn off and lock.
Sent from my PC36100 using XDA App
jabq said:
I have the same issue. I'm using deck's 1.3, tried SZ but Bluetooth wouldn't work. now on tiamat 4.1.0. Tried smartass v2, conservative, and interactive with the same issue.
I hit the button and I see the lights come on for the soft keys but the screen never lights up. Sometimes if I wait I will see the screen flash on then it'll well turn off and lock.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
1.3d LEE smartass 128/537. Car o dope tweaks no screen wake issues
I don't use any additional profiles ... just sharing my experience I hope some one may benifit
Sent from my PC36100 using XDA App
I did the car o dope tweaks and the lag seems to be gone....for now anyway.. phone feels much snappier too!
Sent from my PC36100 using XDA App
legasus233 said:
I did the car o dope tweaks and the lag seems to be gone....for now anyway.. phone feels much snappier too!
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Still running good?
PS. Carodope tweak plus screen transition set to fast in spare parts=warp speed mind melt
Sent from my PC36100 using XDA App
It still does it but not nearly as often. Thanks for the advice! Ill give it a shot
Sent from my PC36100 using XDA App
legasus233 said:
It still does it but not nearly as often. Thanks for the advice! Ill give it a shot
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
what is your CPU set at? Are you using any other profiles
Sent from my PC36100 using XDA App
Related
Okay so I disabled the battery tweak and just started using set cpu. My set cpu doesn't have a lot of profiles or options even. I would like to know if someone could point me in the right direction. Thanks in advance.
Sent from my PC36100 using XDA App
The profiles are user defined so if you havent made any, there won't be any to choose from. What are you trying to do?
I'm trying to make more profiles, or smarter ones. I wanna see what everyone else has..
Sent from my PC36100 using XDA App
Honestly, I don't even use profiles anymore, I just let HAVS do its thing. When I did use them, I used screen off @245 and low batt set to 15% @768.
A HAVS kernel?
Sent from my PC36100 using XDA App
jacoballen22 said:
A HAVS kernel?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Yep. When my phone sleeps, it really SLEEPS. I can go all night without losing a single % point.
This site has two profiles setup for SetCPU
http://home.comcast.net/~evobenchers/howtos.html
I'm curious about what kernel to use. Kings#11 sucked, netarchy cfs was bad..and seems like the only one tolerable was stock but I need to have good battery power..I'm currently using ziggy471
Sent from my PC36100 using XDA App
I am getting great battery life with MikFroyo and stock kernel. If you use a HAVS kernel be careful overclocking it, increasing CPU speed with decreased voltage from the HAVS can harm your phone
Sent from my PC36100 using XDA App
I'm getting annoyed with these kernels. So far the only ones that work are ziggy471 and stock 17. I really want to switch to myns two point two rls 5. Problem with that is I don't want to upgrade my radio and lose something. So how do I upgrade without fixing the radios?
Sent from my PC36100 using XDA App
I updated my radios and then downgraded my PRI back to 1.77, its easy and works great.
Sent from my Evo
Alfa testing HDMI
MikFroYo V4.5
HTC #15
Amon's Recovery
I'm running back into the problem of custom Roms freezing on me, no FC's, just the phone freezing and requiring a battery pull to re-boot. I odin EC05 plus, let it boot and sit for a few minutes, reboot, let it convert, flash cwm purple, wipe, then flash whatever rom, and eventualy they all freeze.
The only roms to never give me that problem is CM7, MIUI and true stock.
Tried everything, except for not using the stock cable, but even still, cm7 and miui have no problem.
Sent from my SPH-D700 using XDA App
I've had the same problem with SRF 1.2...and I linked the problem to certain SetCPU settings like on demand and userspace and to undervolting to much in the higher OC'd frequency ranges...even though I've experimented wih these settings and found a somewhat stable medium...I still get the random freezes once in a blue...I don't know what else it could be.
Sent from my rooted, suited, & booted Epic 4G kno dat!
Right now I'm on SRF with the 1.1.1 Kernel, using setCPU 200-1000, cfq, and no undervolting at all. I was on the 1.1.0 Kernel using voltage control when I had it freeze. I've uninstalled voltage control and galaxy tuner. Oddly enough setcpu dosent fc when I go into the voltages, which it did a few flashes back.
Sent from my SPH-D700 using XDA App
What problems do you think Galaxy tuner was giving you...I'm using it right now?
Sent from my rooted, suited, & booted Epic 4G kno dat!
I wasn't sure, but I figured with using setcpu it would be best to uninstall it so there wasn't any sort of conflicts between the two.
Sent from my SPH-D700 using XDA App
I'm not sure I follow where the conflict btwn those 2 apps would be...once controls cpu speed, governing, and voltage...and the other controls screen brightness and sound attributes...not trynna be a smart ass I'm just trynna make the connection?
Sent from my rooted, suited, & booted Epic 4G kno dat!
In galaxy tuner there is some options for overclocking, as well as IO scheduling.
Sent from my SPH-D700 using XDA App
At any rate. Ill sell you my phone fully uv and tweaked for max battery and speed
Sent from my SPH-D700 using XDA Premium App
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Custodian said:
At any rate. Sounds like your phone is garbage. Make sure you enable journaling to help mend the fc's.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Skimp Killah said:
You didn't read my OP, I have no problems at all with FC's, my problem is the phone freezes and I have to pull the battery to restart.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
I'm wondering if maybe the 200mhz is whats doing it then, I always figured 200-1000 was stock, and the phone would only freeze when the screen was off. Right now I'm using setCPU with it set at 200-1000 with cfq IO scheduling. If I have more freezes I will try bumping up to 400-1000.
JohnCorleone said:
If you aren't undervolting and are having this issue on multiple ROMs, it sounds like a conflict between some apps like you suspected. That or something is not right with your phone. Freezes happen to me when undervolting too much but you aren't doing that....edit...maybe your phone just doesn't like the 200 minimum that well. If I remember right, stock values are 1000 max and 400 min.
Sent from my SPH-D700 using XDA Premium App
Click to expand...
Click to collapse
im currently undervolted with the aosp rom from dub with genocide's final kernel...200mhz is perfectly fine...if 200 is underclocked too low or other frequencies are too low...sod or freezes will happen with the frequency with the wrong voltage is reached..i have setcpu and voltage control together but mainly use the new setcpu...when idling, i see a 1 percent draw in 2 hours and 6 minutes...and use stability test whenever you underclock to see if it safe to use...just my 2 cents...
Just wondering if anyone is running setcpu with Synergy and what there setting are. I have never used this app before and am having a hard time finding out how to use it. Any help will be greatly appreciated!
I have it and they say the best thing to do is leave the main screen alone but make one profile. "screen off" set it to the lowest on both maximum and the minimum, and the % to 100.
Sent from my PC36100 using XDA Premium App
Also put ondemand
Sent from my PC36100 using XDA Premium App
I thought I heard set cpu doesnt work on 2.3 sense yet...am I wrong??
Sent from my PC36100
r.storm85 said:
I thought I heard set cpu doesnt work on 2.3 sense yet...am I wrong??
Sent from my PC36100
Click to expand...
Click to collapse
Works on mine
I didn't think it worked on 2.3 either, downloading now....
setcpu wont set the max on the synergy rom (RC2)
EDIT: fixed it.. you need to do perflock.. then you can set the max on synergy
I would just like to know which kernel works best with this rom as far as performance and battery life?
I'm running netarchy's golden monkey overclocked to 1.13,been a week or so and no problems so far.
Sent from my PC36100 using XDA App
Can you put a direct link as to where I can download the zip file?
Here's the thread. http://forum.xda-developers.com/showthread.php?t=1192796
Sent from my PC36100 using XDA App
Thanks I appreciate it
BrianBusby2038 said:
I'm running netarchy's golden monkey overclocked to 1.13,been a week or so and no problems so far.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
What kind of battery life are you getting?
I am using GM that is baked with the ROM and it works great. I tried Freedom and I received a lot of FC. I set SetCPU to 998/245 and I am getting around 15 hrs with moderate use.
So if i use the stock kernel and setcpu app with this rom, will this make any difference on performance &/or battery life?
Sent from my PC36100 using XDA Premium App
I'm getting 14-15 hours with light use.You can use setcpu with the stock kernel to enforce lower clock speeds with the screen off.The newer kernels may have it built in but I prefer to use setcpu so I know exactly what's happening.
Sent from my PC36100 using XDA App
TY! I got 15 hrs on stock and no setcpu, but something i did notice about this rom is the display goes to the top brightest setting on its own and the icons disappear from the home screen after a reboot.... but awesome rom so far!
Sent from my PC36100 using XDA Premium App
Havnt run into the brightness issue,for the apps disappearing,after a reboot,choose a scene other than the one you normally run and then change it back to the one you normally use and the icons will be back to normal.
Sent from my PC36100 using XDA App
Poonsense runs pretty good with it, also has the hdmi mirroring which i love to use
What kernels are people using when running Blazer 4.1? I'm using the FC24 modem as well.
Im using the stock one that came with it. EL29. Everything working so smooth, no need to change it.
bds120 said:
Im using the stock one that came with it. EL29. Everything working so smooth, no need to change it.
Click to expand...
Click to collapse
Yeah I have no complaints, mine is running smooth as hell as well. Was just wondering if there are any kernels out there that are worth flashing.
I am running rogue 1.4.1 OC'd to 1400 and all is fast and stable as hell! Battery has been awesome too...
ROM: Blazer v4.1
Kernel: 2.6.35.14-rogue_ET-1.4.1+ http://forum.xda-developers.com/showthread.php?t=1341564
Modem: FC24 http://forum.xda-developers.com/showthread.php?t=1352310
Theme: Dark Fire Blue X v2.1.1 http://forum.xda-developers.com/showthread.php?t=1427215
PRL: 11115 http://forum.xda-developers.com/showthread.php?t=1267893
Sent from my SPH-D710 using xda premium
Using rogue as well 1.4.1 underclocked and undervolted. Even better battery life
Sent from my iPhone killer.
CyberpodS2 said:
I am running rogue 1.4.1 OC'd to 1400 and all is fast and stable as hell! Battery has been awesome too...
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Rule of thumb for xda. If you are going to mention a kernel you like it is good etiquette to also provide a link to it.
http://goo-inside.me/kernels/TeamRogue/E4GT-/Gingerbread/Source_Built/rogue_ET-1.4.1-gunslinger-cwr.zip
Sent from my SPH-D710 using Tapatalk
Thanks for the link... I kept getting fc's when using the copy URL function in the xda pro app. I was just waiting to get to a PC to fix the post. All is updated now.
Sent from my Epic 4g Touch running Blazer 4.1 using xda premium
Rogue UC'd with SetCPU profiles
For some reason the Gunslinger kernel just does NOT like my phone. Every time I have tried it my phone overheats and crashes. Oh well, others swear by it. Each phone is different.
I_FLY_Z3R0 said:
Using rogue as well 1.4.1 underclocked and undervolted. Even better battery life
Sent from my iPhone killer.
Click to expand...
Click to collapse
No lag then?
What are exact settings for it and what app are you using to do that... SetCPU?
Sent from my SPH-D710 using xda premium
nibrwr said:
Rogue UC'd with SetCPU profiles
Click to expand...
Click to collapse
What are your exact SetCPU settings?
Sent from my SPH-D710 using xda premium
alwaysbelieve1 said:
What are your exact SetCPU settings?
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
I'd like to know the settings as well.
I use Calk's UV script from 3.0. SetCPU in screenshots.
Edit: don't know what happened there. Screens won't show.
Running 1200/200 conservative.
Undervolted using Calk's script from 3.0.
Profiles (in order of priority): Screen off=500/200, Battery <60%=800/200, Battery <80%=1000/200.
Governor: Sampling rate=35000, SDF=1, Up Threshold=85, Down Threshold=35
nibrwr said:
I use Calk's UV script from 3.0. SetCPU in screenshots.
Edit: don't know what happened there. Screens won't show.
Running 1200/200 conservative.
Undervolted using Calk's script from 3.0.
Profiles (in order of priority): Screen off=500/200, Battery <60%=800/200, Battery <80%=1000/200.
Governor: Sampling rate=35000, SDF=1, Up Threshold=85, Down Threshold=35
Click to expand...
Click to collapse
What's with the Governor settings? I'm new to setcpu and I'm curious.
Here's some info on governors:
http://setcpu.com/documentation_mobile.html#governor
If you do a Google search, you'll find some good explanations of each setting
mitchellvii said:
For some reason the Gunslinger kernel just does NOT like my phone. Every time I have tried it my phone overheats and crashes. Oh well, others swear by it. Each phone is different.
Click to expand...
Click to collapse
No crashes, but it definitely doesnt like my phone either.
nibrwr said:
I use Calk's UV script from 3.0. SetCPU in screenshots.
Edit: don't know what happened there. Screens won't show.
Running 1200/200 conservative.
Undervolted using Calk's script from 3.0.
Profiles (in order of priority): Screen off=500/200, Battery <60%=800/200, Battery <80%=1000/200.
Governor: Sampling rate=35000, SDF=1, Up Threshold=85, Down Threshold=35
Click to expand...
Click to collapse
Where is the script and what do I need to do? I did not see the options to set up that app like you mentioned. Your numbers are not conducive to what is available.
Sent from my SPH-D710 using xda premium
Ttrain721 said:
What kernels are people using when running Blazer 4.1? I'm using the FC24 modem as well.
Click to expand...
Click to collapse
I'm using the gunslinger kernel....undervolted using set cpu everything runs smooth and great battery life
Sent From My SAMSUNG GALAXY S II
The UV script is in /system/etc/init.d. You need the paid app to unlock all SetCPU settings. You'll find the app for free on XDA
alwaysbelieve1 said:
Where is the script and what do I need to do? I did not see the options to set up that app like you mentioned. Your numbers are not conducive to what is available.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Here's a link to the uv script: UV Script